Toshiba f98c228 Service Note

BSI(Service Note) TOSHIBA

TOSHIBA TEC CORPORATION

2-4-1, Shibakoen, Minato-ku, TOKYO, 105-8524 JAPAN

BSI No

F98C228

SUBJECT

Standardization of Left Cover (Under)

MODEL

CATEGORY

Communalizing and Standardizing

Chinese-made: 2060/CSA850119, 2860/CRA848418, 2870/From Feb. 1998 French-made: From Feb. 1998

CONTENT

For standardization (reinforcing screw for frame, added screw hole) of the new models 3560/3570/4560/4570, the following parts (left cover, frame, etc.) have been changed. Though the parts changes except for the left cover have already been notified in BSI/F97I043 "Change of Parts", we will inform you of them again, this time including the following note. (Notes) The screw in the new left cover (under) should be fixed with the hollow facing the cover in

2060, 2860, 2870

FIELD APPLICATION

Others

FACTORY APPLICATION

order to prevent contact with the head of the added screw. When the left cover (under) is replaced in the applicable machines, the new left cover (under) should always be used.

UNIT

Other

Date

98/03/18

DTM-F7801/7904/7X05

Middle frame ®

Middle base frame

Middle frame (F)

Addition of four reinforcement fixing screws

Left cover (under)

Addition of a hollow to prevent contact with the head of the fixing screw.

BSI No. F98C228 Page 2

[ Additional Change Parts No. ]

Part Name Page-Item Before Change After Change Remarks Interchangeability Left cover (under) Middle frame (F) Middle frame (R) Middle base frame Reinforcement fixing screw

1-3 6-1 6-14 7-15 6-57

4401970270 COV-LEFT-L 4401941200 FRAME-M-F 4401941210 K-FRAME-M-R 4401941230 BASE-MID

4401987790 COV-LEFT-L 4402491030 FRAME-M-F 4402490980 K-FRAME-M-R 4402490940 BASE-MID

---- 4842041824 TBIDP-40*10-3C

Not available B Not available B Not available B Four fixing

screws added