Toshiba f98c227 Service Note

BSI(Service Note) TOSHIBA

TOSHIBA TEC CORPORATION

2-4-1, Shibakoen, Minato-ku, TOKYO, 105-8524 JAPAN

BSI No

F98C227

SUBJECT

Change of ROM/ MAIN ROM Ver. 01 -> 02

MODEL

CATEGORY

To improve the operability

From Mar. 1998

CONTENT

The following items have been changed.

Item

A75

FIELD APPLICATION

To be applied when necessary

FACTORY APPLICATION

Contents

If use is made of job access codes, after the end of copying, when one presses the

"FUNCTION CLEAR" key twice, the machine changes from "copy standby" to "access code standby". However, the key should not be pressed two times immediately, but a gap of at least two seconds should have been left between each pressing, or the "access code standby" could not be obtained. The "FUNCTION CLEAR" key has now been improved so that "access code standby" can be obtained even if the key is pressed twice quickly in succession. The aging mode (02 or 07) can be cleared by pushing digital keys" 0 and 9" on the

control panel at the same time.

Date

UNIT

Software

98/03/12

DTM-F8205

Note: Though the method of the aging mode release (pushing digital keys" 0/9") is given as listed in the Service Manual, the machine with the current version of the MAIN ROM cannot be cleared by this method. It should be cleared by turning ON/OFF the power.

[ Combinations of ROM Versions ]

The MAIN, LCD and PNL should never be operated except in the following combinations. As only the following combinations can have their operation checked, errors could well occur with other combinations.

MAIN: Ver. 02 LCD: Ver. 010 ( There is no change of the LCD ROM ) PNL: Ver. 000 ( There is no change of the PNL ROM )

[ MAIN ROM Changed Part Number ] Version 01 -> 02

Page-Item 64-22

Before Change After Change Languages Machine Region

4402897270 PRA-157M-01

4402897400 PRA-157M-02

Common TAD/EUD B

Interchangeability

Change History of ROM Version

Serial

Application

1997/12 WL710702

1998/3

Number

(TAD) BL710182 (EUD)

MAIN LCD PNL

01 010

010 000 ALL ALL F98C227 * Improvement of AC Key

BSI No. F98C227 Page 2

For LanguagesFactory

Model Each

Languag

000 ALL ALL F97L114 * Change of quantity of

BSI No Contents

copies able to be stacked and stapled in the cover/sheet insertion mode

* Correction of jamming in

the sheet insertion mode

* Correction of poor

image visibility caused by the automatic sort setting value.

* Correction of editing

position adjustment setting value

* Correction of error for

access code input at standby.

response for access code standby.

* Improvement of aging

mode release method