Toshiba f98c226 Service Note

BSI(Service Note) TOSHIBA

TOSHIBA TEC CORPORATION

2-4-1, Shibakoen, Minato-ku, TOKYO, 105-8524 JAPAN

BSI No

F98C226

SUBJECT

Change of ROM/ MAIN ROM Ver. 08 -> 09

MODEL

CATEGORY

To improve the operability

From Mar. 1998/ UC811354

CONTENT

The following items have been changed.

Item

7560, 7660

FIELD APPLICATION

To be applied when necessary

FACTORY APPLICATION

Contents

If use is made of job access codes, after the end of copying, when one presses the

"FUNCTION CLEAR" key twice, the machine changes from "copy standby" to "access code standby". However, the key should not be pressed two times immediately, but a gap of at least two seconds should have been left between each pressing, or the "access code standby" could not be obtained. The "FUNCTION CLEAR" key has now been improved so that "access code standby" can be obtained even if the key is pressed twice quickly in succession.

Date

UNIT

Software

98/03/12

DTM-F8205

[ Combinations of ROM Versions ]

The MAIN, LCD and PNL should never be operated except in the following combinations. As only the following combinations can have their operation checked, errors could well occur with other combinations.

MAIN: Ver. 09 LCD: Ver. 070 ( There is no change of the LCD ROM ) PNL: Ver. 040 ( There is no change of the PNL ROM )

[ MAIN ROM Changed Part Number ] Version 08 -> 09

Page-Item 64-22

Before Change After Change Languages Machine Region

4402891370 PRA-156M-08

4402891380 PRA-156M-09

Common Common B

Interchageability

BSI No. F98C226 Page 2

Change History of ROM Version

Serial

Application 1st Lot --- 04 040 040 ALL ALL F97F939 * Change of icon design

1997/6 --- 05 -- -- --- Change in Japanese only 1997/8 UH710507

1997/12 UL711031

1998/1 UA811216 1998/3 UC811354

Number

---

MAIN LCD PNL

06 060

07 070

070 040 ALL ALL F98A138 * Improvement of aging

070 040 ALL ALL F98C226 * Improvement of AC Key

For LanguagesFactory Model Each

Language

040 ALL -- F97I022 * Setting method of edge

040 -- ALL F97L106 * Expansion of adjustment

040 ALL ALL F97L109 * Change of quantity of

BSI No. Contents

* Change of time display * Change in specifying

method of page number in sheet insertion mode

* Correction of error

during 2 in 1 copying.

erase and margin width.

* Correction of error for

code input at standby code setting value as a

countermeasure to insufficient transfer

copies able to be stacked and stapled in the cover/sheet insertion mode

* Correction of jamming in

the sheet insertion mode

* Correction of poor

image visibility caused by the automatic sort setting value.

* Correction of edit

position adjustment setting value

mode release method response for access

code standby.