Toshiba f98c224 Service Note

BSI(Service Note) TOSHIBA

TOSHIBA TEC CORPORATION

2-4-1, Shibakoen, Minato-ku, TOKYO, 105-8524 JAPAN

BSI No

F98C224

SUBJECT

Change of ROM/ MAIN ROM Ver. 09 -> 10

MODEL

CATEGORY

To improve the operability

From Mar. 1998/ DC814950

CONTENT

The following items have been changed.

Item

5560

FIELD APPLICATION

To be applied when necessary

FACTORY APPLICATION

Contents

If use is made of job access codes, after the end of copying, when one presses the

"Function Clear key" twice, the machine changes from "copy standby" to "access code standby". However, the key should not be pressed two times immediately, but a gap of at least two seconds should have been left between each pressing, or the "access code standby" could not be obtained. The "Function Clear key" has now been improved so that "access code standby" can be obtained even if the key is pressed twice quickly in succession.

Date

UNIT

Software

98/03/17

DTM-F8205

[ Combinations of ROM Versions ]

The MAIN, LCD and PNL should never be operated except in the following combinations. As only the following combinations can have their operation checked, errors could well occur with other combinations.

MAIN: Ver. 10 LCD: Ver. 080 ( There is no change of the LCD ROM ) PNL: Ver. 050 ( There is no change of the PNL ROM )

[ MAIN ROM Changed Part Number ] Version 09 -> 10

Page-Item 64-22

Before Change After Change Languages Machine Region

4402876280 PRA-155M-09

4402876290 PRA-155M-10

Common Common B

Interchangeability

BSI No. F98C224 Page 2

Change History of ROM Version

No. MAIN LCD PNL

Application 1st Lot --- 05 050 050 ALL ALL F97F938 * Change of icon design

1997/6 --- 06 -- -- --- Change in Japanese only 1997/8 DH711273

---

1997/12 DL713426

1998/1 DA813693 1998/3 DC814950

07 070

08 080

080 050 ALL ALL F98A136 * Improvement of aging

080 050 ALL ALL F98C224 * Improvement of AC Key

For LanguagesFactory Model Each

Language

050 ALL -- F97I020 * Setting method of edge

050 -- ALL F97L104 * Expansion of adjustment

050 ALL ALL F97L107 * Change of quantity of

BSI No. Contents

* Change of time display * Change in specifying

method of page number in sheet insertion mode

* Correction of error

during 2 in 1 copying.

erase and margin width.

* Correction of error for

code input at standby code setting value as a

countermeasure to insufficient transfer

copies able to be stacked and stapled in the cover/sheet insertion mode

* Correction of jamming in

the sheet insertion mode

* Correction of poor

image visibility caused by the automatic sort setting value.

mode release method response for access

code standby.