BSI(Service Note) TOSHIBA
TOSHIBA TEC CORPORATION
2-4-1, Shibakoen, Minato-ku, TOKYO, 105-8524 JAPAN
BSI No
F98C223
SUBJECT
Change of Length of Rib in the Bushing
MODEL
CATEGORY
To improve the productivity
From Mar. 1998 at the factory
CONTENT
As the bushing (P.10-#.43) has been too long, its installation has been difficult because the staple
guide interferes with the rib edge. To improve this, the rib length has been changed from 4.5 mm to 3
mm.
Though this part has been used, except for the following one(P.10-#.43), all have now been changed
to the new one.
MJ1003
FIELD APPLICATION
Others
FACTORY APPLICATION
Date
UNIT
Finisher
98/03/18
DTM-F8205
Part Name
BUSHING 6-19
Page-Item Before Change After Change Notes Interchangeability
9-19
10-43
4402352400
BUSHING
4402353000
BUSHING
* B
Loading...