Toshiba f98c218 Service Note
BSI(Service Note) TOSHIBA
TOSHIBA TEC CORPORATION
2-4-1, Shibakoen, Minato-ku, TOKYO, 105-8524 JAPAN
BSI No
F98C218
SUBJECT
Change of PROM
MODEL
CATEGORY
To improve the reliability
From Mar. 1998 at the factory
CONTENT
As a countermeasure, the following part has been changed.
MG2010
FIELD APPLICATION
To be applied when necessary
FACTORY APPLICATION
UNIT
Sorter
Date
98/03/18
DTM-F8205
Part Name
ROM 3-32 4400596120
Change Contents
* If the stapler is interrupted during stapling, the staple motor drive stops, and the stapler stops
without being returned to its home position. The copier displays the message "STAYING" however.
This errors has been corrected.
* In combination with the 4560/4570, when sorting or stapled sorting A4-R or LT-R paper, the staple
guide bar and the leading edge of the paper may contact each other as the bins are moving down.
This does not cause any jamming but for the sake of improvement the movement timing of the
staple guide bar has been changed (this only occur with the 4560/4570, not with other machines).
Label
Page-Item Current New Remarks Interchangeability
PRA-773SRT-08
4F1-0381O
1.2.3.4.5.6.
7.8.9.10.20.
4400596130
PRA-773SRT-09
4F1-0381O
1.2.3.4.5.6.
7.8.9.10.20.
---- B
Loading...