Toshiba f98a167 Service Note

BSI(Service Note) TOSHIBA

TOSHIBA TEC CORPORATION

2-4-1, Shibakoen, Minato-ku, TOKYO, 105-8524 JAPAN

BSI No

F98A167

SUBJECT

Error Code (Service Handbook)

Date

98/02/16

MODEL

CATEGORY

Correction of Service Manual

-

CONTENT

Service Handbook

Some omissions have been found in the above Section, which have been corrected as shown in the
following table.

Group
Copier transport

jam

System - Logic
Abnormal signal

DP2460

FACTORY APPLICATION

1. Adjustment Items

1.1 Error Codes

Error
Code

EB5

F07

FIELD APPLICATION

Others

Machine Status
When the specified time to reach the paper stop switch 1 is passed

and the paper does not arrive, a time out error occurs.

Note)

* Usually this does not occur.
(At first, other error code jams are detected.)
* When the size plate setting and the actual paper size are different, it
may occur. When it does happen, the size plate and the paper size
should be made to match.
*To furthre prevent the possibility of an EB5 Error Code from

occurring, the Other Key / Standard Size must be programmed
to the size of paper placed in the Other Drawer when the Size
Plate is set to "OTHER".

Abnormal signal between the system PC board and the logic PC
board

UNIT

Other

Error results from the following causes
* Error of insertion of the P-ROM(IC42) in the logic PC board
* Error of harness connection between the system and the logic PC
board
* Error of logic PC board