Toshiba f98a158 Service Note

BSI(Service Note) TOSHIBA

TOSHIBA TEC CORPORATION

2-4-1, Shibakoen, Minato-ku, TOKYO, 105-8524 JAPAN

BSI No

F98A158

SUBJECT

Change of PROM

MODEL

CATEGORY

To improve the reliability

From Feb. 1998 at the factory

CONTENT

If the power supply is quickly switched ON/OFF during the automatic energy saving mode, a signal error (C54) will result.

When the automatic energy saving mode is set, a sorter sleep signal (ON) is sent from the copier to the sorter and the sorter also goes into the automatic energy saving mode. If the above operation takes place, the start signal except the sorter sleep signal (ON) will occur. So, the sorter can only accept a sorter sleep signal (OFF) and the signal error will result.

MG2012

FIELD APPLICATION

To be applied when necessary

FACTORY APPLICATION

Date

98/02/24

UNIT

Sorter, Software

DTM-F8102

Now, even in the automatic energy saving mode, a change has been made to prevent the occurrence of such an error so that the start signal can be accepted.

Part Name

ROM 3-85 4402357650

Label

PageItem

PRA-790SRT-07

Current New Remarks Interchangeability

4402357660 PRA-790SRT-08

4F1-0741

1.2.3.4.5.6..

7.8.9.10.20.

4F1-0741

1.2.3.4.5.6..

7.8.9.10.20.