Toshiba f98a143 Service Note

BSI(Service Note) TOSHIBA

TOSHIBA TEC CORPORATION

2-4-1, Shibakoen, Minato-ku, TOKYO, 105-8524 JAPAN

BSI No

F98A143

SUBJECT

Countermeasure to Warping of the Front Cover

MODEL

CATEGORY

Other countermeasures

From Jan. 1998

CONTENT

Because the front cover has been warped, a reinforcing stay has been added to the inside of the front
cover as a countermeasure.

[ Change Contents Details ]

2060, 2860, 2870

FIELD APPLICATION

Others

FACTORY APPLICATION

UNIT

Other

Date

98/02/05

DTM-F7Y13

Front cover internal figure

Label 4

Label 5

Label 1 Label 2 Label 3

Fixing screw 2

(Fix with the plate)

Note: The labels 3~5 are to be used only for MJD, MFD regions. There are no labels for other countries.

1. Reinforcing stay added (see above)

Reinforcing stay

Fixing screw 1
(Newly added)

Fixing screw 2

(Fixed with the plate)

2. A boss (screw hole) is added for the installation of the stay to the front cover. ("fixing screw 1")
The stay is fixed (two places) with a magnetic catch plate (left and right) and the boss is

installed to the cover by screws. (total: 3 places)

3. Change the length of the five screws used at the front cover (6 -> 8mm) and add one stay

installation screw.

M3 X 6 ---> M3 X 8 5 screws changed

M3 X 8 1 screw added (newly added screw for stay installation)

4. Change of position for attaching label, change of shape of label
The label attaching position has been moved because the label would now be hidden behind

the newly added stay.
[ Change of attaching position ]

Attaching positions of labels 1~5 have been changed. (There is no position change for label

4.)
[ Shape change ]

Shape change of label 5 (The new label can be used in common with other models.)

Current New

BSI No. F98A143 Page 2