Toshiba f98a138 Service Note

BSI(Service Note) TOSHIBA

TOSHIBA TEC CORPORATION

2-4-1, Shibakoen, Minato-ku, TOKYO, 105-8524 JAPAN

BSI No

F98A138

SUBJECT

Change of ROM/ MAIN ROM Ver. 07 -> 08

MODEL

CATEGORY

To improve the operability

From Jan. 1998

CONTENT

The following items have been changed.

Item

7560, 7660

FIELD APPLICATION

To be applied when necessary

FACTORY APPLICATION

Contents

The aging mode (02 or 07) can be cleared by pushing digital keys" 0 and 9" on the

control panel at the same time.

Date

UNIT

Software

98/01/20

DTM-F7Z12

Note: Though the method of the aging mode release (pushing digital keys" 0/9") is

given as listed in the Service Manual, the machine with the current version of the MAIN ROM cannot be cleared by this method. It should be cleared by turning ON/OFF the power.

[ Combinations of ROM Versions ]

The MAIN, LCD and PNL should never be operated except in the following combinations. As only the following combinations can have their operation checked errors could well occur with other combinations.

MAIN: Ver. 08 LCD: Ver. 070 ( There is no change of the LCD ROM ) PNL: Ver. 040 ( There is no change of the PNL ROM )

[ MAIN ROM Changed Part Number ] Version 07 -> 08

Page-Item

64-22

Current New Languages Machine Region Interchangeabilit

4402890930 PRA-156M-07

4402891370 PRA-156M-08

Common Common B

BSI No. F98A138 Page 2

Change History of ROM Version

Serial

Application 1st Lot --- 04 040 040 ALL ALL F97F939 * Change of icon design

1997/6 --- 05 -- -- --- Change in Japanese only 1997/8 UH710507

1997/12 UL711031

1998/1

Number

---

MAIN LCD PNL

06 060

07 070

070 040 ALL ALL F98A138 * Improvement of aging

For LanguagesFactory

Model Each

language

040 ALL -- F97I022 * Setting method of edge

040 -- ALL F97L106 * Expansion of adjustment

040 ALL ALL F97L109 * Change of quantity of

BSI No Contents

* Change of time display * Change in specifying

method of page number in sheet insertion mode

* Correction of error

during 2 in 1 copying.

erase and margin width.

* Correction of error for

code input at standby code setting value as a

countermeasure to insufficient transfer

copies able to be stacked and stapled in the cover/sheet insertion mode

* Correction of jamming in

the sheet insertion mode

* Correction of poor

image visibility caused by the automatic sort setting value.

* Correction of edit

position adjustment setting value

mode release method