Toshiba f98a136 Service Note

BSI(Service Note) TOSHIBA

TOSHIBA TEC CORPORATION

2-4-1, Shibakoen, Minato-ku, TOKYO, 105-8524 JAPAN

BSI No

F98A136

SUBJECT

Change of ROM/ MAIN ROM Ver.08 -> 09

MODEL

CATEGORY

To improve the operability

From Jan. 1998/DA813693

CONTENT

The following items have been changed.

Item

5560

FIELD APPLICATION

To be applied when necessary

FACTORY APPLICATION

Contents

The aging mode (02 or 07) can be cleared by pushing digital keys" 0 and 9" on the

1

control panel at the same time.

Date

UNIT

Software

98/01/20

DTM-F7Z12

Note: Though the method of the aging mode release (pushing digital keys" 0/9") is

given as listed in the Service Manual, the machine with the current version of
the MAIN ROM cannot be cleared by this method. It should be cleared by
turning ON/OFF the power.

[ Combinations of ROM Versions ]

The MAIN, LCD and PNL should never be operated except in the following combinations. As
only the following combinations can have their operation checked errors could well occur
with other combinations.

MAIN: Ver. 09
LCD: Ver. 080 ( There is no change of the LCD ROM )
PNL: Ver. 050 ( There is no change of the PNL ROM )

[ MAIN ROM Changed Part Number ] Version 08 -> 09

Page-Item
64-22

Current New Languages Machine Region

4402875840
PRA-155M-08

4402876280
PRA-155M-09

Common Common B

Interchangeability

BSI No. F98A136 Page 2

Change History of ROM Version

Serial

Application

1st Lot --- 05 050 050 ALL ALL F97F938 * Change of icon design

1997/6 --- 06 -- -- --- Change in Japanese only
1997/8 DH711273

1997/12 DL713426

1998/1 DA813693

Number

---

MAIN LCD PNL

07 070

07 070

08 080

080 050 ALL ALL F98A136 * Improvement of aging

09

050 ALL -- F97I020 * Setting method of edge

050 -- ALL F97L104 * Expansion of adjustment

050 ALL ALL F97L107 * Change of quantity of

For LanguagesFactory

Model Each

languag

e

BSI No Contents

* Change of time display
* Change in specifying

method of page number
in sheet insertion mode

* Correction of error

during 2 in 1 copying.

erase and margin width.

* Correction of error for

code input at standby
code setting value as a

countermeasure to
insufficient transfer

copies able to be
stacked and stapled in
the cover/sheet insertion
mode

* Correction of jamming in

the sheet insertion mode

* Correction of poor

image visibility caused
by the automatic sort
setting value.

mode release method