Toshiba f97l114 Service Note

BSI(Service Note) TOSHIBA

TOSHIBA TEC CORPORATION

2-4-1, Shibakoen, Minato-ku, TOKYO, 105-8524 JAPAN

BSI No

F97L114

SUBJECT

Change of ROM/ MAIN ROM Ver. 00 -> 01, LCD ROM Ver. 000 -> 010

MODEL

CATEGORY

Other countermeasures

From Dec. 1997

CONTENT

The following items have been changed.

Item Contents

A75

FIELD APPLICATION

To be applied when necessary

FACTORY APPLICATION

If the sort or staple sort mode is also selected with the cover-sheet/sheet-insertion

mode; Regardless of the special size of the cover-sheet/sheet-insertion actually set, the greater size of paper set (A3 or B4 or LD) will be recognised. ( In this case, if small size is used, stacking can be made only up to the maximum stacking limits of the greater size.) To avoid this control and to ensure the same treatment of the size of the special sheets and that of the copy (in the case of setting value "1" below), the following setting code must be used.

Mode 08 Code 55 Setting value 0: Same as at present (initial value)

1: Treated as the same size

Date

UNIT

Software

97/12/22

DTM-F7Y15/7Z03

Note) If the setting value is made "1", since the special sheets are treated as being of

the same size as the copy paper, using different sizes of special sheets can cause paper misfeeding.

When selecting the sheet insertion mode (inserted sheet, copied sheet), and copying is

to be made of originals of varying sizes in the automatic paper selection mode, this mode will not function for the second and subsequent originals and paper misfeeding occurs. This has been corrected. If the automatic sort mode (08-4) setting value is set to other than "0", after an original

has been fed from the ADF in the automatic reduction ratio selection mode and the copy mode is unchanged, when the ADF is used again, the copy image will be poor. This has been corrected.

4 If editing position adjustment is suitably performed (Code 32 in mode 05), the setting

value becomes in the latter half (about 13) of the range (0~15). This has been corrected so that position is in the middle of the range (about 8).

Note) If an exchange is made for a new version ROM, readjust the editing position

(05~32).

5 If use is made of job access codes, after the end of copying, when one presses the All

Clear key twice, the machine should go into access code standby, but there has been an error in which even when the key has been pressed correctly, the access code standby situation did not result. This error has now been corrected.

BSI No. F97L114 Page 2

[ Combinations of ROM Versions ]

The MAIN, LCD and PNL should never be operated except in the following combinations. As only the following combinations can have their operation checked errors could well occur with other combinations.

MAIN: Ver. 01 LCD: Ver. 010 PNL: Ver. 000 ( There is no change of the PNL ROM )

[ MAIN ROM Changed Part Number ] Version 00 -> 01

PageItem

64-22

[ LCD ROM Changed Part Number ] Version 000 -> 010

PageItem

64-29

Current New Languages Machine Region Interchangeability

4402897000 PRA-157M-00

4402897270 PRA-157M-01

Common TAD/EUD B

Current New Languages Machine Region Interchangeability

4402897010 PRA-D157LUC-000 4402897020 PRA-D157LGB-000

4402897050 PRA-D157LD-000 4402897060 PRA-D157LF-000 4402897070 PRA-D157LI-000 4402897080 PRA-D157LE-000 4402897090 PRA-D157LSF-000 4402897100 PRA-D157LS-000 4402897110 PRA-D157LN-000 4402897120 PRA-D157LDK-000 4402897130 PRA-D157LNL-000 4402897140 PRA-D157LP-000

4402897280 PRA-D157LUC-010 4402897290 PRA-D157LGB-010

4402897300 PRA-D157LD-010 4402897310 PRA-D157LF-010 4402897320 PRA-D157LI-010 4402897330 PRA-D157LE-010 4402897340 PRA-D157LSF-010 4402897350 PRA-D157LS-010 4402897360 PRA-D157LN-010 4402897370 PRA-D157LDK-010 4402897380 PRA-D157LNL-010 4402897390 PRA-D157LP-010

American English

English EUD B

German Not available B French Not available B Italian Not available B Spanish Not available B Finnish Not available B Swedish Not available B Norwegian Not available B Danish Not available B Dutch Not available B Portuguese Not available B

TAD B