Toshiba f97l108 Service Note

BSI(Service Note) TOSHIBA

TOSHIBA TEC CORPORATION

2-4-1, Shibakoen, Minato-ku, TOKYO, 105-8524 JAPAN

BSI No

F97L108

SUBJECT

Change of ROM/ MAIN ROM Ver. 22 -> 23, LCD ROM Ver. 220 ->230

MODEL

CATEGORY

Other countermeasures

From Dec. 1997 / ML714202

CONTENT

The following items have been changed.

Item

1

6560

FIELD APPLICATION

To be applied when necessary

FACTORY APPLICATION

Contents
If the sort or staple sort mode is also selected with the cover-sheet/sheet-insertion
mode;
Regardless of the special size of the cover-sheet/sheet-insertion actually set, the
greater size of paper set (A3 or B4 or LD) will be recognised. ( In this case, if small
size is used, stacking can be made only up to the maximum stacking limits of the
greater size.)
To avoid this control and to ensure the same treatment of the size of the special sheets
and that of the copy (in the case of setting value "1" below), the following setting code
must be used.

Mode 08 Code 55 Setting value 0: Same as at present (initial value)

1: Treated as the same size

Date

UNIT

Software

97/12/22

DTM-F7Y15/7Z03

Note) If the setting value is made "1", since the special sheets are treated as being of

the same size as the copy paper, using different sizes of special sheets can
cause paper misfeeding.

2 When selecting the sheet insertion mode (inserted sheet, copied sheet), and copying is

to be made of originals of varying sizes in the automatic paper selection mode, this
mode will not function for the second and subsequent originals and paper misfeeding
occurs. This has been corrected.

3 If the automatic sort mode (08-4) setting value is set to other than "0", after an original

has been fed from the ADF in the automatic reduction ratio selection mode and the
copy mode is unchanged, when the ADF is used again, the copy image will be poor.
This has been corrected.

[ Combinations of ROM Versions ]

The MAIN, LCD and PNL should never be operated except in the following combinations. As
only the following combinations can have their operation checked errors could well occur
with other combinations.

MAIN: Ver. 23
LCD: Ver. 230
PNL: Ver. 200 ( There is no change of the PNL ROM )

BSI No. F97L108 Page 2

Change History of ROM Version

Serial

Application
1st Lot --- 18 180 180 ALL ALL --- ---

1997/3 MC711058

1997/4 MD711585 19
1997/5 ME711921

1997/6 --- 21 -- -- --- Change in Japanese only
1997/8 MH712884

Number

---

MAIN LCD PNL

19 190

19 190 190

191 191

20 200 200

22 220

22 220

180 UC,

200 ALL -- F97I021 * Setting method of edge

200 -- ALL F97L105 * Expansion of adjustment

For LanguagesFactory

Model Each

language

-- F97E906 * Adjustment by user

GB

D, F I, E * Switch of Logo display

F -- F97E907 Corrected errors in French

ALL ALL F97F937 * Change of icon design

BSI No Contents

Automatic Energy
Saving/OFF Time

* Improving operability of

weekly timer setting
cover/sheet insertion

* Addition of add paper

display for Cover/Sheet
Insertion cassette

* Changeover of MG-2011

toward shift feeding of
paper

* Countermeasure to

insufficient transfer
during showing of the
specified paper type

* LCD backlights go off

during timer off

* Errors collected in

German and French
display

* Change of time display
* Change in specifying

method of page number
in sheet insertion mode

* Correction of error during

2 in 1 copying.

* Change in leading edge

adjustment setting value

* Adapted to the energy

star Tier 2.

* Adapted to the MG-2014

erase and margin width.

* Correction of error for

code input at standby
code setting value as a

countermeasure to
insufficient transfer