Toshiba f97l107 Service Note
BSI(Service Note) TOSHIBA
TOSHIBA TEC CORPORATION
2-4-1, Shibakoen, Minato-ku, TOKYO, 105-8524 JAPAN
BSI No
F97L107
SUBJECT
Change of ROM/ MAIN ROM Ver. 07 -> 08, LCD ROM Ver. 070 -> 080
MODEL
CATEGORY
Other countermeasures
From Dec. 1997 / DL713426
CONTENT
The following items have been changed.
Item
5560
FIELD APPLICATION
To be applied when necessary
FACTORY APPLICATION
Contents
If the sort or staple sort mode is also selected with the cover-sheet/sheet-insertion
1
mode;
Regardless of the special size of the cover-sheet/sheet-insertion actually set, the
greater size of paper set (A3 or B4 or LD) will be recognised. ( In this case, if small
size is used, stacking can be made only up to the maximum stacking limits of the
greater size.)
To avoid this control and to ensure the same treatment of the size of the special sheets
and that of the copy (in the case of setting value "1" below), the following setting code
must be used.
Mode 08 Code 55 Setting value 0: Same as at present (initial value)
1: Treated as the same size
Date
UNIT
Software
97/12/22
DTM-F7Y15/7Z03
Note) If the setting value is made "1", since the special sheets are treated as being of
the same size as the copy paper, using different sizes of special sheets can
cause paper misfeeding.
2 When selecting the sheet insertion mode (inserted sheet, copied sheet), and copying is
to be made of originals of varying sizes in the automatic paper selection mode, this
mode will not function for the second and subsequent originals and paper misfeeding
occurs. This has been corrected.
3 If the automatic sort mode (08-4) setting value is set to other than "0", after an original
has been fed from the ADF in the automatic reduction ratio selection mode and the
copy mode is unchanged, when the ADF is used again, the copy image will be poor.
This has been corrected.
[ Combinations of ROM Versions ]
The MAIN, LCD and PNL should never be operated except in the following combinations. As
only the following combinations can have their operation checked errors could well occur
with other combinations.
MAIN: Ver. 08
LCD: Ver. 080
PNL: Ver. 050 ( There is no change of the PNL ROM )
BSI No. F97L107 Page 2
Change History of ROM Version
For LanguagesFactory
Model Each
languag
e
BCI No Contents
* Change of time display
* Change in specifying
method of page number
in sheet insertion mode
* Correction of error
during 2 in 1 copying.
erase and margin width.
* Correction of error for
code input at standby
code setting value as a
countermeasure to
insufficient transfer
copies able to be
stacked and stapled in
the cover/sheet insertion
mode
* Correction of jamming in
the sheet insertion mode
* Correction of poor
image visibility caused
by the automatic sort
setting value.
Application
Serial
Number
MAIN LCD PNL
1st Lot --- 05 050 050 ALL ALL F97F938 * Change of icon design
1997/6 --- 06 -- -- --- Change in Japanese only
1997/8 DH711273
---
1997/12 DL713426
07 070
07 070
08 080
050 ALL -- F97I020 * Setting method of edge
050 -- ALL F97L104 * Expansion of adjustment
050 ALL ALL F97L107 * Change of quantity of
[ MAIN ROM Changed Part Number ] Version 07 -> 08
Page-
Current New Languages Machine Region Interchangeability
Item
64-22
4402875760
PRA-155M-07
4402875840
PRA-155M-08
Common Common B
[ LCD ROM Changed Part Number ] Version 070 -> 080
Page-
Current New Languages Machine Region Interchangeability
Item
64-29A,
B,H,I,J,K
64-29C,
F,G
64-29D
64-29E
64-29L
64-29M
64-29N
4402875780
PRA-T155LUC-070
4402875790
PRA-T155LGB-070
4402875800
PRA-T155LD-070
4402875810
PRA-T155LF-070
4402876100
PRA-T155LI-070
4402876110
PRA-T155LE-070
4402876120
PRA-T155LSF-070
4402875860
PRA-T155LUC-080
4402875870
PRA-T155LGB-080
4402875880
PRA-T155LD-080
4402875890
PRA-T155LF-080
4402875920
PRA-T155LI-080
4402875930
PRA-T155LE-080
4402875940
PRA-T155LSF-080
American
English
English EUD,SED,UKD B
German GSD B
French FRD B
Italian Service Part B
Spanish Service Part B
Finnish Service Part B
TAD,CSD,AUD,
TWD,SAD,ASD
B
Loading...