BSI(Service Note) TOSHIBA
TOSHIBA TEC CORPORATION
2-4-1, Shibakoen, Minato-ku, TOKYO, 105-8524 JAPAN
BSI No
F97K081
SUBJECT
Countermeasure to Bad Odour of Silicone Roller
MODEL
CATEGORY
Other countermeasures
From Aug. 1997
(Service Parts: From May 1997
factory shipment)
CONTENT
The silicone roller (SR-1550H/4409847880) has been changed as countermeasure to the bad smell it
sometimes produced fuser unit. If a foul smell is detected in the field, replace the roller with the
following part.
As the Parts No. of the silicone roller have not been changed, the countermeasure part can be
distinguished by the following method.
1550
FIELD APPLICATION
To be applied when necessary
FACTORY APPLICATION
Date
97/11/14
UNIT
Fuser/Paper-Exit
DTM-F7317
1) Identification by box
Current: Lot No. color marked on the box = Black
New: Lot No. color marked on the box =
2) Identification by part
Current: Marked by magic pen on the shaft edge of the Front side, or no marking
New: Marked by magic pen on the shaft edge (D-cut side) of the Rear side
PS. Silicone Roller Front/Rear Side should be Identified as shown in the drawing below>
Rear
side:
D-cut face
Shaft is long
Front
No D-cut face
Shaft is short
Red
side: