Toshiba f97j059 Service Note

BSI(Service Note) TOSHIBA

TOSHIBA TEC CORPORATION

2-4-1, Shibakoen, Minato-ku, TOKYO, 105-8524 JAPAN

BSI No

F97J059

SUBJECT

Caution During the Unpacking of the Chinese-made MP-1501

MODEL

CATEGORY

Treatment in the field

CWI740028~CWI743105

CONTENT

The packing-method in the Chinese-made MP-1501 (optional LCF for the 2060/2860) is different
from that for Japanese-made models. Corrugated fiberboard at the lower paper stacking tray has
been added to the Chinese-made model and the corrugated fiberboard should be removed at the
time of Unpacking/Setup. So, an provisional insertion sheet (this sheet is explained with the above
method) is included. However, in fact no insertion sheet has been included with machines made in
Sept. 1997.

MP1501

FIELD APPLICATION

To be applied when necessary

FACTORY APPLICATION

UNIT

LCF

Date

97/10/31

DTM-F7908

When the MP-1501 is opened, the corrugated fiberboard (shaded portion) shown below should be
removed in above serial number M/C.