Toshiba f97i033 Service Note

BSI(Service Note) TOSHIBA

TOSHIBA TEC CORPORATION

2-4-1, Shibakoen, Minato-ku, TOKYO, 105-8524 JAPAN

BSI No

F97I033

SUBJECT

Treatment in the Field with BSI No. F97I032

MODEL

CATEGORY

Treatment in the field

Temporary countermeasure
factory application:
From Sept.~Nov. 1997

CONTENT

In BSI No. F97I032, until item 3 "The shape of the fuser unit and the separation claw cover as well as
the quantity of screws have been changed has been changed" has been applied, as a temporary
countermeasure to jams, a washer has been added to the separation claw portion and the quantity of
screws needed for the separation claw cover should be reduced by one. The measure to be taken in
the field is as follows.

2060, 2860, 2870

FIELD APPLICATION

To be applied when necessary

FACTORY APPLICATION

Date

97/10/17

UNIT

Fuser/Paper-Exit

DTM-F7904

[ Details of modification ]

Added washer
7400106065
1HWAS060BSNN13E

4401952040
COVER-SCRAPER

Screw removed
(1 place)

Part Name Part No. Remarks
Added
washer

7400106065
1HWAS060BSNN13E

4402088600

SCREW-M3-TENS

Added washer: board thickness: 1 mm,inner diameter: 5.3~6.5
mm
dia., outside diameter: 10~13 mm dia.

Added washer
7400106065
1HWAS060BSNN13E

Copier which have had BSI No. F97I032 "Item 3" applied, should not have this washer fitted.