Toshiba f97g957 Service Note
BSI(Service Note) TOSHIBA
TOSHIBA TEC CORPORATION
2-4-1, Shibakoen, Minato-ku, TOKYO, 105-8524 JAPAN
BSI No
F97G957
SUBJECT
Note Concerning the Fusing Temperature Setting Value
MODEL
CATEGORY
Treatment in the field
------
CONTENT
When a paper of 90g/cm2 or heavier is used, the margin of the fusing temperature decreases. If
copies are made under conditions unfavorable to fixing (such as in early morning or in cold regions),
poor fixing might occur ; therefore, to prevent this, the fusing temperature is set at 155
of shipping from the factory.
However, the initial value is 150
performed, the fusing temperature will return to the initial value of 150
to 155
FC70
FIELD APPLICATION
Others
FACTORY APPLICATION
as noticed in the Service Manual. So, if initialization is
in the service mode. (Refer to the Service Manual, D114, "Machine adjustment mode.")
Date
97/08/08
UNIT
Fuser/Paper-Exit
. In this case, reset it
-------
at the time
Loading...