Toshiba f97f937 Service Note

BSI(Service Note) TOSHIBA

TOSHIBA TEC CORPORATION

2-4-1, Shibakoen, Minato-ku, TOKYO, 105-8524 JAPAN

BSI No

F97F937

SUBJECT

Change of ROM

MODEL

CATEGORY

Other countermeasures,
Request from the field

From May/ME711921

CONTENT

The following items have been changed.

Item Contents Remarks

6560

FIELD APPLICATION

To be applied when necessary

FACTORY APPLICATION

1 Change of icon design in duplex copying See sample screen
2 When 12 hour system is set on the clock display (set by 1 in 08

mode 02 code), this was indicated as PM 0:00 but the display has
been altered to show PM 12:00

3 When three modes, Cover, Sheet Insertion and Duplexing, are

used in combination, a change has been made in page
specification in the Sheet Insertion mode so that the top cover
added in the Cover mode is counted as page 1.

4 After setting a mode in the EDIT menu, if you go to another menu

(Basic,etc), the EDIT button should be displayed in shade.
However since the EDIT button sometimes fails to do so, this
problem has been corrected.

5 While 2 in 1 copying is in progress with the number of originals set

as odd-numbered, if interrupt copying is performed and then
cleared, the copier fails to return fully to the previous state. This
problem has been rectified.

6 When carrying out LCF 100% leading edge adjustment (05 made

53 code) at the standard value (shifting the leading edge by 1mm
corresponding with the original ), the adjustment value in the range
(0-15) is placed at the end (14,15). Correction has been made so
that this value can be placed in the center of range.
Note : When replacing the ROM with a new version, the LCF/100%
leading edge position (05-53) either has to be readjusted or 6 has
to be subtracted from the present value and this corrected value
has to be input again.

Date

UNIT

Software

97/07/10

DTM-F7511/7606

below
For TAD, CSD the
clock's default display is
the 12 hour system.

See sample screen
below

7 Energy star Tier2

SSR control has been added corresponding to Tier 2 added in

BSI/F91E908
8 MG2014 (Sorter)
9 Change of the message at the time of cover sheet paper empty

Before change : Set Insertion sheets in bypass

After change : Set Insertion sheets

American English,
English Only

BSI No. F97F937 Page 2

[ 1. Duplex copying icon design change ]

* The icons shown below are for the American version, but the design is to be used throughout.

< Current > < New >

[ 4. Correction of EDIT button failing to be displayed in shade ]

This portion is not
displayed in shade

[ Combinations of ROM Version ]
When the change of the ROM version is performed in the field the MAIN, LCD and PNL ROMs
should also be changed to the newest versions at the same time (see below). If combinations other
than these are used, then operating errors could very well occur.

MAIN : Ver. 20
LCD : Ver. 200
PNL : Ver. 200

[ Change of Part Number : MAIN ROM (Version 19 to 20) ]

Current New Language Machine Region Interchangeability
4402326830
PRA-154M-19

4402326980
PRA-154M-20

Common Common B

[ Change of Parts Number : LCD ROM (Version 180, 190 to 200) ]

Current New Language Machine Region Interchangeability
4402326850

PRA-T154LUC-190

4402327000
PRA-T154LUC-20

American
English

TAD,CSD,AUD,
TWD,SAD,ASD

0
4402326860
PRA-T154LGB-190

4402327010

PRA-T154LGB-20

English EUD,SED,UKD B

0

B