Toshiba f97f932 Service Note

BSI(Service Note) TOSHIBA

TOSHIBA TEC CORPORATION

2-4-1, Shibakoen, Minato-ku, TOKYO, 105-8524 JAPAN

BSI No

F97F932

SUBJECT

Prevention of Staining inside the Machine from Fusing Oil

MODEL

CATEGORY

To improve the reliability

UB710081~

CONTENT

Since the gap between the oil supply roller and the left face of the oil tray was narrow, oil might leak
from the "A" (refer to bellow Fig.) section and the inside of machine might become stained. To
enlarge the above gap, the following change has been performed and the position for installing the oil
supply roller has been altered.

FC70

FIELD APPLICATION

To be applied when necessary

FACTORY APPLICATION

Date

97/07/10

UNIT

Fuser/Paper-Exit

-------

The dimensions of the front and rear frames (01, 02) have been changed.1.
The dimension of the pressure spring (03) has been changed. Also, the configuration of the hook 2.
has been changed in order to prevent its coming off, and a hole (diameter 3mm) has been added
to the front and rear frames (01, 02) to hide the tip of the hook.

Changed Parts

Page No. Current New New Part Name Interchan

ge-ability
40 14 4402403850 4402428470 FRONT FRAME D Interchangability "B"
40 6 4402403860 4402428480 REAR FRAME D at set exchange
40 5 4402413510 4402428490 TENSION SPRING D

Oil supply roller

Oil tray left side

Remarks

Added hole
(diameter 0.3mm)

BSI No. F97F932 Page 2

Added hole

(diameter 0.3mm)