Toshiba f97e906 Service Note
BSI(Service Note) TOSHIBA
TOSHIBA TEC CORPORATION
2-4-1, Shibakoen, Minato-ku, TOKYO, 105-8524 JAPAN
BSI No
F97E906
SUBJECT
Change of ROM
MODEL
CATEGORY
Request from the field, To
improve the operability
From Mar. 1997 / MC711058
CONTENT
The following items have been changed.
[Change of Contents : Main ROM (Version 18 to 19), LCD ROM (Version 180 to 190)]
Items
6560
FIELD APPLICATION
To be applied when necessary
FACTORY APPLICATION
Note Remarks
Making the energy save and the auto shut off adjustable by the
1
user.
Improving the operability of the weekly timer For details, see below
2
For occasions when paper runs out in the cover-sheet and
3
sheet-insertion modes, an improvement has been made to display
ADD PAPER symbol on the message display ( the cassette
selection symbol flashes ).
After the end of copying in modes other than multistacking with the
4
MG-2011, the copies will be pushed toward the front so that they
may be easily removed from the front. A setting code has been
provided to enable choice between the use or non-use of this
function.
Setting Mode 08 . Code 135
( 0 : Use, 1: Non Use / Initial value 0 )
A setting code has been provided to enable choice between the
5
appearance and non-appearance of the TOSHIBA symbol on the
message display when the power is turned on.
Correction has been made of a poor transfer error which arose
6
when thin paper (A3,Ledger) was manually fed (without size
setting) with setting mode (08) code 64 (paper type) introduced as
valid.
A change has been made to turn off the background lighting of the
7
LCD when the timer is off (weekly timer/auto shut off)
A French spelling mistake is corrected.
8
Ì
DITION
É
DITION
Date
UNIT
Software
97/06/06
DTM-F7303
For details, see below
Applied for all regions
except English
French Only
[Change of Contents : PNL ROM ( Version 180 to 190 ) ]
Items
10
Correction of the situation in which two lines of a German error
9
message were not displayed
Correction of the PFP paper size display font in the French
message display (when the word FOLIO was flashing, it did not
remain steady in size)
Note Remarks
German Only
French Only
BSI No. F97E906 Page 2
[ Details of making ENERGY SAVE and AUTO SHUT OFF adjustable by the user on the message
display panel. ]
( Setup )
1. Press the PROGRAM key and enter into the program menu.
2. Press the NEXT button.
3. As shown below a key for ENERGY SAVE and AUTO SHUT OFF has been added, so press the
key for change.
4. The screen is to be changed to the screen below. Each setup time can be changed.
( Setup of "ENERGY SAVE" ) ( Setup of "AUTO SHUT OFF")
[ Details of improving the operability of the weekly timer setting ]
When you select the ON / OFF time;
Current : Press keys, to select the day and ON/OFF hours and minutes.
( The selection of the day is still made in the same way as at present )
New : Directly pressing the displayed ON / OFF time areas, these times can be set.
Loading...