Toshiba f97d873 Service Note

BSI No. F97D873 Page 1

BSI(Service Note) TOSHIBA

TOSHIBA TEC CORPORATION

2-4-1, Shibakoen, Minato-ku, TOKYO, 105-8524 JAPAN

BSI No

F97D873

SUBJECT

Improvement of the PFP Installation

MODEL

CATEGORY

To improve the operability

From Apr. 1997

CONTENT

For improvement of the installation in KD - 1003 / 2009 ( Paper Feed Pedestal for 2060/2860/2870 ), the following parts have been changed.

1. Change of feeder connecting unit

KD1003, KD2009

FIELD APPLICATION

Others

FACTORY APPLICATION

UNIT

PFP

Date

97/05/30

DTM-F7213

a. Change of the edge bending height on the front side b. Elimination of the edge projection on the rear side c. Addition of bracket fixing the unit to rear side d. Elimination of gear cover and connector cover e. Change of the unit-fixing screw f. Extension of feeder-connecting harness to rear frame of PFP g. Addition of hinges for PPC feed cover to feeder connecting unit h. Attachment of labels for installation position

Current

NEW

‚†•B

(Application of the positioning label)

LABEL-INT-F

(Addition)

Fitting

BSI No. F97D873 Page 2

Feeder connecting unit

LABEL-INT (Addition)

Fitting

LABEL-ARROW

(Addition)

(Change of Parts)

Parts Name Guide 4401996500 4401997310 K-GUIDE-INT-1 Guide 4401996670 4401997330 GUIDE-INT-2

Harness 4401999460 4401999610 WH-PSTPSW-766 Harness 4401999450 4401999600 WH-PFP-CLT-766

(Addition of Parts)

Name Code 4401997340 BRKT-INT-R Feeder Connecting Unit 4843391367 BD/W-EDS-0607M Feeder Connecting Unit 4401997370 LABEL-INT Feeder Connecting Unit 4401997380 LABEL-INT-F Feeder Connecting Unit 4401996700 K-BRKT-HINGE Feeder Connecting Unit 4401997350 SCREW-INT-F Accessory Part 4842040635 TBID40*08MSCR3C Accessory Part

------ LABEL-ARROW

(Elimination of parts)

Name Code 4401995880 COV-GR-WH-INT Accessory Part 4401996880 COV-CNCT-FED-1 Accessory Part 4842040684 TBID3006MSCR3C Accessory Part 4842040370 TBID3006MSZN3L Accessory Part

Current New Parts Description

Parts Description Remarks

Not treated as a service part

Parts Description Remarks

* Quantity Change 5 to 2

LABEL-ARROW (Addition)

2. Interchangeability Although the interchangeability of individual parts on the above list is "D", that of the whole unit is

"B".

3. Change of Unpacking / Setup Instructions

As a result of a change in the unpacking procedure, the unpacking instructions have been correspondingly altered.