Toshiba EM-31061A User Manual

TEC Digital Scale

SL-47-N-1 SERIES

Owner's Manual

Table of Contents

TEC

Document No. EM1-31061A

TEC CORPORATION

EM1-31061A

TABLE OF CONTENTS

Page

1. INTRODUCTION .............................................................................................................................. 1-1

2. APPLICABLE MODEL ..................................................................................................................... 2-1

3. SPECIFICATIONS ........................................................................................................................... 3-1

4. OVERVIEW ...................................................................................................................................... 4-1

5. LEVEL ADJUSTMENT..................................................................................................................... 5-1

6. INSTALLING THE REMOTE PIPE .................................................................................................. 5-1

7. CONNECTING THE INTERFACE CABLE AND REMOTE CABLES ............................................. 7-1

8. TROUBLESHOOTING .................................................................................................................... 8-1

9. BEFORE YOU CALL FOR SERVICE

................. ........................................................................... 8-1

CAUTION:

1. This manual may not be copied in whole or in part without prior written permission of TEC.

2. The contents of this manual may be changed without notification.

3. Please refer to your local Authorized Service representative with regard to any queries you may have in this manual.

EM1-31061A

1. INTRODUCTION

We thank you very much for purchasing the TEC Digital Scale SL47-N-1 Series. This series has been designed with TEC reliability.

Should you have any questions concerning the scale, please refer to this manual. Be sure to keep this manual for future reference.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.

Operations of this equipment in a residential area is likely to cause harmful interference in which case

the user will be required to correct the interference at his own expense. (for USA only)

Changes or modifications not expressly approved by manufacturer for compliance could void the user’s authority to operate the equipment.

“This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment

Regulations.”

“Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel

brouilleur du Canada.” (for CANADA only)

WARNING This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

As the colours of the cores in the mains lead of this equipment may not correspond with the colour markings identifying the terminals in your plug, proceed as follows:

• the core which is coulored green and yellow must be connected to the terminal in the plug which is marked with the letter E or by the earth symbol, or colored green and yellow,

• the core which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.

• the core which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.

WARNING: This equipment must be earthed.

Safety Summary

Personal safety in handling or maintaining the equipment is extremely important. Warnings and Cautions necessary for safe handling are included in this manual. All warnings and cautions contained in this manual and written inside or outside of the scale should be read and understood before handling or maintaining the equipment. Do not attempt to effect repairs to this equipment. If a fault occurs that cannot be rectified using the procedures described in this manual, turn off the power, unplug the machine, then contact your authorised TEC representative for assistance.

1-1

1. INTRODUCTION

Safety Precautions

This Owner's Manual and the products (machines) which you have purchased contain indications which should be observed in order to use the machines safely and prevent harm to yourself and others and damage to property. The meanings of these indications and symbols are given below. Read these indications and become familiar with their contents before reading this Owner's Manual.

The following safety precaution will help to ensure proper use of the scale.

■ Unplug the printer whenever you are working inside the scale.

■ Keep your work environment static free.

Meanings of Each Symbol

This symbol indicates warning items (including cautions). Specific warning contents are drawn inside the Asvmbol. (The symbol on the left indicates a general caution.)

This symbol indicates prohibited actions (prohibited items). Specific prohibited contents are drawn inside or near the 0 symbol. (The symbol on the left indicates "no disassembling".)

EM1-31061A

1. INTRODUCTION

Prohibited

This symbol indicates actions which must be performed. Specific instructions are drawn inside or near the •symbol. (The symbol on the left indicates "disconnect the power cord plug from the outlet".)

■ Do not plug in or unplug the power cord plug with wet hands as this may cause electric shock.

■ if the machines share the same

outlet with any other eiectrical appliances which consume large amounts of power, the voltage will fluctuate widely each time these appliances operate. Be sure to provide an exclusive outiet for the machine as this may cause the machines to malfunction.

Any other than the specified AC voltage is prohibited.

Prohibited

■ Do not use voltages other than the voltage (AC) specified on the rating plate, as this may cause fire or

electric shock.

■ Do not place metal objects or water-filled containers such as flower

vases, flower pots or mugs, etc. on top of the machines. If metal objects or spilled liquid enter the machines, this may cause fire or electric shock.

■ Do not insert or drop metal, flammable or other foreign objects into the machines through the ventilation slits, as this may cause fire or electric shock.

1-2

■ Do not remove covers, repair or modify the machine by yourself. You may be Injured by high voltage, very hot parts or sharp edges inside the machine.

1. INTRODUCTION

EM1-31061A

1. INTRODUCTION

Prohibited

■ Do not scratch, damage or modify the power cords. Also, do not place heavy objects on, pull on, or exces sively bend the cords, as this may cause (ire or electrical shock.

■ If foreign objects (metal fragments,

water, liquids) enter the machines, Rrst turn off the power switches and disconnect the power cord plugs from the outlet, and the contact your sales agent (or maintenance and service agent). Continued use of the machine

in that condition may cause fire or

electric shock.

■ Ensure that the equipment is

properly grounded. Extension cables

should also be grounded. Fire or

electric shock can occur on improp erly grounded equipment.

Discoonecl the plug.

Oisconm■nn^ Ihe plug.

■ Continued use of the machines in an abnormal condition such as when the machines are producing smoke or strange smells may cause fire or electric shock. In these cases, immediately turn off the power switches and disconnect the power cord plugs from the outlet. Then, contact your sales agent {or mainte nance and service agent).

■ If the machines are dropped or their cabinets damaged, first turn off the power switches and disconnect the power cord plugs from the outlet, and the contact your sales agent (or maintenance and service agent). Continued use of the machine in that condition may cause fire or electric shock.

Prcjhibited

■ Do not install the machines where they might be exposed to direct sunlight, high humidity, or dust. Othenvise fire or electric shock could occur.

■ Do not place heavy objects on top of the machines, as these items may become unbalanced and fall causing injury.

1-3

Prohibited

[Precautions During installation]

■ Do not place the machines on unstable or slanted surfaces, as they may drop or fall and cause injury.

■ Do not block the ventilation slits of the machines, as this will cause heat to build up inside the machines and may cause fire.

+ 9 hidden pages