Toshiba Carrier TCB-AX21UL, WX-TA01UES Owner's Manual
TOSH|BA
Carrier
REMOTE CONTROLLER FOR AIR CONDITIONER (SPLIT TYPE)
Owner's Manual
Remote Controller
Model name:
Wireless remote controller kit
TCB-AX21 UL
Wireless remote controller
Generic model name
and signal receiving unit
TCB-AX21 UL WX-TA01U ES
(Wireless remote controller
model name)
zesmsA
ca,m,
Wireless remote controller Signal receiving
(WX-TA01 UES) unit
Owner's Manual
Remote controller for air
conditioner (Split type) 1
Manuel du proprietaire
Telecommande pour climatiseur
(Type split) 19
Wirelessremotecontrollerkit Owner'sManual
Thank you very much for purchasing TOSHIBA/Carrier Remote Controller for Air
Conditioner.
Please read this owner's manual carefully before using your Remote Controller for Air
Conditioner.
• Be sure to obtain the "Owner's manual" and "Installation manual" from constructor (or
dealer).
Request to constructor or dealer
Please clearly explain the contents of the Owner's manual and hand over it.
Contents
1 PRECAUTIONS FOR SAFETY ............................ 2
2 PART NAMES AND FUNCTIONS ......................... 4
3 CORRECT USAGE ..................................... 9
4 TIMER OPERATION ................................... 10
5 SLIDE SWITCH ....................................... 11
6 HOW TO INSERT THE BATTERIES ...................... 12
7 HOW TO HANDLE THE REMOTE CONTROLLER ........... 13
8 HOW TO USE THE REMOTE CONTROLLER CORRECTLY... 14
9 ADDRESS ........................................... 14
10 HOW TO PERFORM EMERGENCY OPERATION ............ 16
11 BEFORE ASKING FOR REPAIR WORK ................... 17
f-EN - 1 -
Wireless remote controller kit Owner's Manual
1 PRECAUTIONS FOR SAFETY
WARNING
WARNINGS ABOUT INSTALLATION
• Make sure to ask the qualified installation professional
in electric work to install the remote controller,
If the remote controller is inappropriate installed by
yourself, it may cause, electric shock, fire, and so on,
• Make sure to install the air conditioner specified by
TOSHIBA/Carrier and ask the exclusive dealer when
installing, If the air conditioner is installed by yourself,
it may cause electric shock or fire, etc,
WARNINGS ABOUT OPERATION
• Prevent any liquid from falling into the remote
controller.
Do not spill juice, water or any kind of liquid.
It may cause malfunction, electric shock or fire, etc.
• When you are aware of any error with the air
conditioner (smells like something burning etc.),
immediately turn off the circuit breaker to stop the air
conditioner, and make contact with the dealer. If the air
conditioner is continuously operated with an error, it
may cause malfunction, electric shock, fire, and so on.
WARNINGS ABOUT MOVEMENT AND REPAIR
• Do not repair any unit by yourself.
• Whenever the air conditioner needs repair, make sure
to ask the dealer to do it. If it is repaired imperfectly, it
may cause electric shock or fire.
• When reinstalling the air conditioner, contact with the
dealer.
If the installation is insufficient, it may cause electric
shock or fire, etc.
- 2 - 2-EN
Wireless remote controller kit Owner's Manual
z_ CAUTION
CAUTIONS ABOUT INSTALLATION
• Do not install the remote controller in a place where its
signals do not reach the indoor unit.
• Do not install the remote controller inthe place under the
direct sunlight and close to any heat source. It may
cause malfunction.
• The fluorescent tamp with rapid start system or inverter
system may disturb the signal reception. For details,
contact with the dealer of the air conditioner you have
purchased.
CAUTIONS ABOUT OPERATION
• Do not drop or apply strong shock to the air conditioner.
It may cause malfunction of the remote controller.
• Use batteries that meet the specifications.
/
o
3-EN - 3 -
Wireless remote controller kit Owner's Manual
2 PART NAMES AND FUNCTIONS
• Remote Controller (WX-TA01UES)
• Max. 8 indoor units can be operated by a remote controller as a group. (See page 14)
• Illustration of LCD shown below is for explanation. It may differ from the actual LCD.
1 Transmitting part
10
1
11
13
--14
15
--16
17
2 Remote controller sensor
The peripheral temperature is sensed when
the sensor button is pushed to remote
controller side.
3 LCD
The operation mode isdisplayed.
4 ON/OFF button
Pushing this button starts, and pushing again
stops the unit.
5 Mode button
Selects desired operation mode.
6 Fan speed button
7 Timer Set button
Use to setup the timer.
(See page 10)
8 ACL button
This button is used after replacement of
battery or selection of slide switch.
(See page 11)
9 Slide switch
(See page 11)
10 Battery compartment
(See page 12)
11 Cover
Slide the cover holding its both sides.
- 4 - 4-EN
Wireless remote controller kit Owner's Manual
2
3
6-
7
8
I
9
10
11
1
r7 i
C7)-
_ _ACL _ ENSOI
TOSHIBA
_r_er
J
12
13
14
15
-13 16
14
17
-15
--16
-17
--18
18
AUTO louver display differs
according to the installed unit.
No function
Setup temperature button
Adjusts the set point.
Set the desired set point by pushing _ _ or
_).
Filter button
No function
Swing/Air direction button
No function
Address button
(See page 14)
Ventilation button
Use this when a ventilation fan or other unit,
purchased on the market, has been
connected.
Sensor button
This button is used when selecting the temp.
sensor at the remote controller side. At the
shipment from the factory, this button is set to
the temp. sensor at the indoor unit.
5-EN - 5 -
Loading...