Toshiba BDX2700KU User Manual

Blu-ray Disc Player

BDX2700KU

OWNER’S MANUAL

INTRODUCTION CONNECTIONS PLAYBACK

FUNCTION SETUP

OTHERS

2700

Owner’s Record

The model number and serial number are on the back of the unit. Record these numbers in the spaces below. Refer to these numbers whenever you communicate with your Toshiba dealer about this unit.

Model number:

Serial number :

Introduction

SAFETY PRECAUTIONS

The lightning ﬂ ash with an arrowhead symbol, within the equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufﬁ cient magnitude to constitute a risk of electric shock to persons.

CAUTION: VISIBLE LASER RADIATION WHEN OPEN. DO NOT STARE INTO BEAM.

AVIS

WARNING:TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO

NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.

The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in this owner’s manual.

The symbol for Class II (Double lnsulation)

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliﬁ ers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not ﬁ t into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories speciﬁ ed by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table speciﬁ ed by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualiﬁ ed service personnel. Servicing is required when the apparatus has been damaged in any way, such as the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

ADDITIONAL SAFETY INSTRUCTIONS

15. Do not overload wall outlets; extension cords, or integral convenience receptacles as this can result in a risk of ﬁ re or electric shock.

16. Apparatus shall not be exposed to dripping or splashing and no objects ﬁ lled with liquids, such as vases, shall be placed on the apparatus.

17. Keep your ﬁ ngers well clear of the disc tray as it is closing. Neglecting to do so may cause serious personal injury.

18. Do not place a heavy object on or step on the apparatus. The object may fall, causing serious personal injury and serious damage to the apparatus.

19. Do not use a cracked , deformed, or repaired disc. These discs are easily broken and may cause serious personal injury and apparatus malfunction.

20. If the apparatus should emit smoke or an unusual odor, immediately disconnect the power cord from the wall outlet. Wait until the smoke or smell stops, then ask your dealer for a check and repair. Neglecting to do so may cause ﬁ re.

21. During thunderstorms, do not touch the connecting cables or the apparatus.

22. Warning: To prevent spread of ﬁ re, keep candles or other open ﬂ ames away from this product at all times.

23. The mains plug is used as disconnect device. The mains plug of apparatus should not be obstructed OR should be easily accessed during intended use. To be completely disconnect the power input, the mains plug of apparatus shall be disconnected from the mains.

PRECAUTIONS

CAUTION:

• To prevent direct exposure to laser beam, do not try to open the enclosure. Visible and invisible laser radiation when open and interlocks defeated. DO NOT STARE INTO BEAM.

• Use of controls or adjustments or performance of procedures other than those speciﬁ ed may result in hazardous radiation exposure.

• Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

Warning: Batteries shall not be exposed to excessive heat such as sunshine, ﬁ re or the like.

FCC Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The party responsible for compliance to these rules is: Toshiba America Consumer Products, L.L.C. 82 Totowa Rd. Wayne, NJ 07470. Ph: 1-800-631-3811

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

WARNING: Changes or modiﬁ cations to this unit not expressly approved by Toshiba, or parties authorized by Toshiba, could void the user’s authority to operate the equipment.

Notes On Copyright

This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Rovi Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Rovi Corporation. Reverse engineering or disassembly is prohibited.

On Placement

• Do not use this unit in places which are extremely hot, cold, dusty or humid.

• Do not restrict the air ﬂ ow of this unit by placing it somewhere with poor air ﬂ ow, by covering it with a cloth, or by placing it on bedding or carpeting.

• Be sure to remove the disc and unplug the AC power cord from the outlet before carrying the unit.

On Safety

• Do not handle the AC power cord with wet hands and do not put your ﬁ ngers or objects into the unit.

• When connecting or disconnecting the AC power cord, grip the plug and not the cord itself. Pulling the cord may damage it

and create a hazard.

• When you are not going to use the unit for a long period of time, disconnect the AC power cord.

On Condensation

• When left in a heated room where it is warm and damp, water droplets or condensation may form inside the equipment.

When there is condensation inside the unit, the unit may not function normally. Let the unit stand for 1-2 hours before turning the power on or gradually heat the room and allow the unit to dry before use.

On Recycling

• This unit’s packaging materials are recyclable and can be reused. Please dispose of any materials in

accordance with your local recycling regulations.

• Batteries should never be thrown away or incinerated but disposed of in accordance with your local

regulations concerning chemical wastes.

INTRODUCTION

Introduction

Supplied Accessories

BONUSVIEW

Remote Control with Batteries (AAA x 2)

OWNER’S MANUAL

Owner’s Manual (EN)

Composite Audio / Video Cables

Quick Start Guide (EN/ES)

Symbols used in this Manual

To specify for which media type each function is, we put the following symbols at the beginning of each item to operate.

Symbol Description

Description refers to BD-video and BD-RE / BD-R recorded in BDMV format

Description refers to DVD-video

Description refers to Audio CD / DTS-CD

Description refers to DVD-RW/-R with AVCHD ﬁ les

Description refers to BD-RE/-R, DVDRW/-R, CD-RW/-R and SD Memory Card with MP3 ﬁ les

Description refers to BD-RE/-R, DVDRW/-R, CD-RW/-R and SD Memory Card with Windows Media™ Audio ﬁ les

Description refers to BD-RE/-R, DVDRW/-R, CD-RW/-R and SD Memory Card with JPEG ﬁ les

If you do not ﬁ nd any of the symbols listed above under the function heading, the operation is applicable to all media.

“Wi-Fi CERTIFIED” logo is a registered trademark of Wi-Fi Alliance. “Wi-Fi PROTECTED SETUP” logo is a trademark of Wi-Fi Alliance.

“DVD” logo is a trademark of DVD Format / Logo Licensing Corporation.

HDMI, the HDMI logo, and High-Deﬁ nition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,392,195; 7,272,567; 7,333,929; 7,212,872 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks, & DTS-HD, DTS-HD Master Audio | Essential and the DTS logos are trademarks of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.

“x.v.Color” and “x.v.Color” logo are trademarks of Sony Corporation.

“AVCHD” and the “AVCHD” logo are trademarks of Panasonic Corporation and Sony Corporation.

“BONUSVIEW” is trademark of Blu-ray Disc Association.

Java and all other Java trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and/or other countries.

Trademark Information

“Blu-ray Disc” and are trademarks of Blu-ray Disc Association.

Blockbuster is a registered trademark of Blockbuster, Inc. Netﬁ x is a registered trademark of Netﬁ x Inc. Pandora is a registered trademark of Pandora Media, Inc. VUDU is a trademark of VUDU, Inc.

“BD-LIVE” logo is trademark of Blu-ray Disc Association.

Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.

Table of Contents

Introduction

SAFETY PRECAUTIONS .....................................2

IMPORTANT SAFETY INSTRUCTIONS ............. 2

PRECAUTIONS ................................................... 3

Supplied Accessories ....................................... 4

Symbols used in this Manual ........................... 4

Trademark Information ...................................... 4

Table of Contents ............................................... 5

Features .............................................................. 6

Identiﬁ cation of Controls .................................. 7

Front panel .................................................................... 7

Rear panel ..................................................................... 7

Using the Remote Control ................................ 8

Remote Control ............................................................. 8

Installing batteries .........................................................9

Operating with the remote control ............................... 10

Front Panel Display ..................................................... 10

Connections

Connecting to a TV .......................................... 11

Connecting to a TV using an HDMI cable ................... 12

Connecting to a TV using a component video cable ... 12

Connecting to a TV using an A/V cable ....................... 12

Connecting to an Audio System .....................13

Via 2-Channel Analog Audio Output ........................... 13

Via Digital Audio Output .............................................. 13

Via HDMI Audio Output ............................................... 13

Network Connection .........................................14

Connecting your player to a wired router .................... 14

Connecting your player to a wireless access point or

router........................................................................... 14

Connecting the Speakers .................................15

Positioning the Speakers ..................................16

Playback

Information on Playback .................................. 17

Playable Discs and Files ............................................ 17

Unplayable Discs and Files ........................................ 17

Color Systems ............................................................ 18

Region Codes ............................................................ 18

Structure of Disc/SD Card Contents .......................... 18

Playing a Disc ................................................... 19

Basic playback ........................................................... 19

Variable Speed Playback .................................. 20

Playing in fast reverse / forward directions. ................ 20

Playing frame by frame .. ............................................ 20

Playing in slow motion ............................................... 20

Locating a Desired Section ............................. 20

Locating a title using the top menu ............................ 20

Locating a speciﬁ c chapter or track ............................ 21

Accessing a Speciﬁ c Location Directly .......... 21

Locating a speciﬁ c title/chapter/time ......................... 21

Repeating a Title, Chapter, Track or Speciﬁ c

Segment ............................................................ 22

Repeating a title, chapter or track .............................. 22

Repeating a speciﬁ c segment ................................... 22

Playing in a Random Order .............................. 22

Playing tracks or ﬁ les in a random order ................... 22

PIP(BONUSVIEW) Setting ................................ 23

Camera Angle ................................................... 23

Audio Selection................................................. 23

Subtitle Selection ............................................. 24

Displaying On-screen Information .................. 24

Playing AVCHD/MP3/WMA/JPEG Files ............25

Playing ﬁ les on a data disc ......................................... 25

Using an SD Card ..............................................26

Inserting an SD card ................................................. 26

Using a USB Device ..........................................27

Operating a USB device ............................................ 27

Customizing the Function Settings

General Operations ...........................................28

Network Connection Setting ............................28

Info Menu ............................................................31

Performing Quick-Setup ...................................31

Display Setting ...................................................32

Audio Setting .....................................................33

Speaker Setting .................................................34

Language Setting ..............................................35

Parental Control .................................................35

System Setting ...................................................36

Upgrading Your Player’s Firmware ..................37

Using the Connected Applications ................. 38

Watching Movies with Netﬂ ix™ ................................... 38

Watching Movies with BLOCKBUSTER® ................... 39

Watching Movies with VUDU™ ................................... 39

Listening to Music with PANDORA™........................... 40

Using BD-Live

Features ................................40

Others

Troubleshooting & Maintenance ......................41

Troubleshooting... ........................................................ 41

Maintenance .............................................................. 42

Glossary .............................................................43

Speciﬁ cations ....................................................45

Limited Warranty ................................................46

INTRODUCTION

Introduction

““Customizing the Function

Settings

” on page 32.

Features

Blu-ray Disc

You can enjoy Blu-ray Disc which is capable of storing ﬁ ve times more data than a conventional DVD.

BD-Java

With some BDs which support Java applications, you can enjoy the interactive functions such as games or interactive menus.

BD-Live

BD-Live (BD-ROM version 2 Proﬁ le 2.0) that allows interactive functions to be used when this unit is connected to the Internet in addition to the BONUSVIEW function. The various functions differ depending on the disc.

Full high-deﬁ nition video playback

Watch movies in the highest picture quality available for your HDTV. This unit offers full high-deﬁ nition video playback up to 1080p resolution for an amazing viewing experience. A highly detailed picture and increased sharpness delivers a more trueto-life picture.

DVD Upconversion for enhanced picture quality

Your current DVD will look even better than before thanks to video upconversion. Upconversion will increase the resolution of standard deﬁ nition DVD to high deﬁ nition up to 1080p over an HDMI connection. The picture will be less jagged and more realistic for a near high-deﬁ nition experience.

Enjoy your content on different kinds of media

Full backwards compatibility with BD, DVD, CD and SD card ensures that you can continue to enjoy your current audio-video collection. Additionally, you can view JPEG digital pictures or listen to MP3 or Windows Media™ Audio music ﬁ les.

Experience rich multi-channel surround sound

Multi-channel surround sound, which recognizes real-to-life sound and makes you feel like you are really there.

PIP (BONUSVIEW)

Some BD-videos have the PIP function which enables you to display the secondary video in the primary video. You can call up the secondary video by pressing BONUSVIEW whenever the scene contains the secondary video.

Pop-up menu

Some BD-video have pop-up menu which is a navigation menu that can be called up and be operated on the TV screen without interrupting the playback. You can call up the pop-up menu by pressing POPUP/TOP MENU or MENU. Contents in the pop-up menu vary depending on the disc.

Playback of Content from an SD Memory Card

You can play back AVCHD / MP3 / WMA / JPEGs stored in an SD Memory Card. You can store picture-in-picture commentary, subtitles or other extras for BD-ROM ver. 2 (Proﬁ le 2.0 / Proﬁ le

1.1) ﬁ les in an SD Memory Card and play back with the BDvideo.

Playing back AVCHD ﬁ les

This unit supports playback of AVCHD format ﬁ les (new format for high deﬁ nition video camcorders) recorded on disc/SD card. Your high deﬁ nition personal archive is playable in HD quality.

x.v.Color

This unit supports playback of video contents on discs recorded with “x.v.Color” technology. To watch this video content with the “x.v.Color”, a TV or other display device supporting both video image reproduction using the “x.v.Color” standard and capable of manually switching it’s color setting is required. Please refer to the owner’s manual of your display device for further information.

Wi-Fi CERTIFIED

The Wi-Fi CERTIFIED logo is an assurance that Wi-Fi Alliance has tested a product in numerous conﬁ gurations and with a diverse sampling of other devices to ensure compatibility with other Wi-Fi CERTIFIED equipment that operates in the same frequency band.

Easy and simple connection to your HDTV via HDMI

Connect this unit to your HDTV with one single HDMI (HighDeﬁ nition Multimedia Interface) cable. It is recommended to use a High Speed HDMI Cable for better compatibility. The high deﬁ nition video output signal will be transferred to your HDTV without conversion to analog signals, so you will get excellent picture and sound quality.

Thanks to other multiple outputs, you can also easily connect to your home theater system or ampliﬁ er.

HDMI CEC (Consumer Electronics Control)

This unit supports HDMI CEC, which allows integrated system control over HDMI and is part of the HDMI standard.

This function may not work properly on some devices.

HDMI 1080p/24F output (BD only)

This unit is equipped with a feature which can provide the smooth movement in the playback of ﬁ lm originated material with the frame rate of 24 frames per second with progressive scan. (Available only when the TV is connected by an HDMI cable and compatible with 1080p/24F frame input.)

Refer to “Display Setting” in

Settings

” on page 32.

Customizing the Function

To play back the digital video images of a BD / DVD via an HDMI connection, it is necessary that both the unit and the TV (or an AV ampliﬁ er) suppor t a copyright protection system called HDCP (high-bandwidth digital content protection system). HDCP is copy protection technology that comprises data encryption and authentication of the connected AV device. This unit supports HDCP. Please read the operating instructions of your TV (or AV ampliﬁ er) for more information.

Identiﬁ cation of Controls

Front panel

1 2 3 4 5 6 7

INTRODUCTION

1. Disc tray

2. OPEN/CLOSE

button

3. Display

• Refer to “Front Panel Display” on page 10.

4. Remote sensor

5. STOP

6. PLAY

button

7. ON/STANDBY indicator

8. SD card slot

9. ON/STANDBY button

• Press to turn on the unit, or to turn the unit into the standby mode. (To completely turn off the unit, you must unplug the AC power cord.)

Rear panel

123456

COMPONENT VIDEO OUT

YPBP

AC IN

BITSTREAM / PCM

OPTICAL

HDMI OUT

LAN

USB

789

1. AC power cord

• Connect to a standard AC outlet to supply power to this unit.

• Unplug this cord from the AC outlet to completely turn off the unit.

2. LAN terminal

• Use to connect a network equipment with LAN cable.

3. HDMI OUT jack

• Use to connect a TV with an HDMI compatible port via an HDMI cable.

4. OPTICAL jack

• Use to connect an AV receiver / ampliﬁ er, Dolby Digital / DTS decoder or other device with a digital audio optical input jack using a digital audio optical cable.

AUDIO OUT

How to Power On Your Unit ?

1. Connect to a standard AC outlet to supply power to this unit, the ON/STANDBY indicator lights.

2. Wait about 20 seconds and the ON/STANDBY indicator will be off automatically.

3. After 10 seconds, press ON/STANDBY button to turn on the unit. The ON/STANDBY indicator illuminates and display lights.

SBL

CSLFL

SBR

VIDEO

OUTPUT

SW SR FR

MULTI CHANNEL AUDIO OUTPUT

5. COMPONENT VIDEO OUT jacks

• Use to connect a TV with component video inputs using a component video cable.

6. MULTI CHANNEL AUDIO OUTPUT jacks

• Use to connect an AV receiver / ampliﬁ er with a audio cable.

7. USB jack

• Use to connect USB ﬂ ash drives (not included).

8. AUDIO OUT jacks

• Use to connect a TV, an AV receiver / ampliﬁ er or other device with a composite audio cable.

9. VIDEO OUT jack

• Use to connect a TV, an AV receiver or other device with a composite video cable.

Introduction

Using the Remote control

Remote control

BONUSVIEW

8 9

11 12

15 16 17 18

24 25

26 27 28

32 33

No. Item Description

ASPECT

OPEN/CLOSE

SETTING

HOME MENU

BONUSVIEW

ANGLE

VOLUME + / -

AUDIO

SUBTITLE

RETURN

DIMMER

RED / GREEN /

BLUE / YELLOW

REV

SKIP

12 Press to advance one frame.

PAUSE

Press to adjust aspect ratio in full stop mode.

Press to open or close the disc tray.

Press to display the settings in home menu.

Press to display the Connected in home menu.

Press to switch picture-in-picture feature on or off (only applicable to BD-video which supports the PIP function). For more details, see “PIP (BONUSVIEW) Setting” on page 23.

Same as SKIP / SKIP . For detailed operations, please refer to SKIP / SKIP .

Press to select a viewing angle if multiple angles are available on the disc.

Press to adjust the volume.

Press to select the audio mode.

Press to display the subtitle menu.

Press to return to the previous menu.

Press to adjust the brightness of display on the front of the Blu-ray disc player.

• Press to select items on some BD contents.

• When ﬁ le list / thumbnail list is shown, press to switch between pages.

During playback, press to fast reverse the playback.

•

During playback, press once to return to the beginning of the current title, chapter, track or ﬁ le.

• During playback, press twice to return to the previous title, chapter, track or ﬁ le.

•

During the JPEG playback, press to return to the previous ﬁ le.

• Press to pause playback.

•

When playback is in pause mode, press repeatedly to forward the playback step by step.

Number buttons

GOTO

ON/STANDBY

POPUP/TOP MENU

PIC

INFO

RESOLUTION

2nd AUDIO

/ / /

2nd SUBTITLE

FWD

PLAY

SKIP

STOP

REPEAT

RANDOM

A-B

CLEAR

ENTER

• In playback mode, press GOTO, then press the number buttons to enter a title, chapter, track, time or ﬁ le number.

• In menu mode, press to enter the parental code password.

Press to display the search menu.

Press to turn on the unit, or to turn the unit into the standby mode. (To completely turn off the unit, you must unplug the power cord.)

• During Blu-ray Disc playback, press to open a menu that lets you control Blu-ray Disc playback.

• During DVD playback, press to open the DVD menu (if available).

In playback mode, press to adjust picture quality according to your preference (Actual effect to picture may vary depending on TV.):

• E.P.M (Enhanced Picture Mode): The picture is sharper with enhanced color.

• Shar pness

Press to display disc information.

Press to select the video resolution in full stop mode.

Press to return to the previous menu.

In PIP mode, press to turn the audio for the secondary video on or off. For more details, see “PIP (BONUSVIEW) Setting” on page

23.

Press to select items or settings.

Press to conﬁ rm or select menu items.

In PIP mode, press to turn the subtitle for the secondary video on or off.

During playback, press to fast forward the playback.

Press to start playback or resume playback.

During playback, press to skip to

• the next title, chapter, track or ﬁ le.

• During the JPEG playback, press to go to the next ﬁ le.

Press to stop playback.

Press to play back the disc in slow motion.

Press to toggle between various repeat modes.

Press to turn random function on or off.

Press to play back a deﬁ ned section between point A and B repeatedly.

Press to clear an input error.

Press to conﬁ rm or select menu items.

Installing batteries

Install the batteries (AAAx2) matching the polarity indicated inside battery compartment of the remote control.

Open the cover.

Insert batteries.

Make sure to match the + and – on the batteries to the marks indicated in the battery compartment.

Close the cover.

Caution: Never throw batteries into a ﬁ re.

Notes:

• Do not mix different battery types or combine used batteries with new ones.

• If the remote control does not operate correctly, or if the operating range becomes reduced, replace both batteries with new ones.

• If the batteries are dead or if you will not be using the remote control for a long time, remove the batteries to prevent battery acid from leaking into the battery compartment.

INTRODUCTION

Introduction

Operating with the remote control

Point the remote control at the remote sensor and press the buttons.

Distance: About 5 m from the front

of the remote sensor.

Angle: About 30° in each

direction of the front of the remote sensor.

Front Panel Display

123 4 5 6 7 8

DVD

1080ip 720p 576ip 480ip

* Do not expose the remote sensor of the Blu-ray disc player

to a strong light source such as direct sunlight or other illumination. If you do so, you may not be able to operate the Blu-ray disc player via the remote control.

Notes:

• Direct the remote control at the remote sensor of the Blu-ray disc player.

• When using the remote control, press the buttons at intervals of about 1 second to ensure the correct mode of operation.

• Do not drop or give the remote control a shock.

• Do not leave the remote control near an extremely hot or humid place.

• Do not spill water or put anything wet on the remote control.

• Do not open the remote control.

• If the remote control is not going to be used for a long time, remove the battery to avoid damage caused by battery leakage corrosion.

2 c h

MULTI

HDMI

TRK

1. PLAY indicator

Lights when playing.

2. PAUSE indicator

Lights when paused.

3. DVD indicator

Lights when a DVD disc is inserted.

4. CD indicator

Lights when a CD disc is inserted.

5. TRK (TRACK) indicator

Lights when a CD/MP3 disc is inserted.

6. Audio Channel indicator

Shows the audio channel of the current DVD/BD.

7. HDMI indicator

Lights when HDMI TV is connected.

(REPEAT) indicator

Illuminates when REPEAT is pressed.

/ SKIP indicator

Lights while in fast forward / fast reverse mode.

10. Resolution indicator

Shows resolution of video output.

11. Character indicators

Displays various kinds of information such as elapsed time

or message, etc. (See Example shown as below.)

Indicates the elapsed time

Closing the disc tray

Indicates that a Blu-ray disc is inserted

Loading a disc

Connecting to a TV

Connect the Blu-ray player to your TV.

1. Choose the appropriate connection, then proceed to the corresponding instruction (A, B or C) on the next page.

Best (Supports up to 1080i/1080p, 1080p/24F resolution.)

Your TV

Video

Audio

No analog audio connection required.

HDMI Cable NOT INCLUDED

HDMI cable

HDMI IN

High

Definition

Go To

Better (Supports up to 1080i resolution.)

COMPONENT

VIDEO IN

B/CB

Video

Audio

component video cable

composite audio cable

PR/C

AUDIO IN

Your TV

High

Definition

Go To

CONNECTIONS

Component Video Cable NOT INCLUDED

Basic (Supports only 480i resolution.)

Video

composite audio video cable

Audio

Connect this unit directly to the TV. If the composite audio / video cables are connected to a VCR, pictures may be • distorted due to the copy right protection system.

Composite Video / Audio Cables INCLUDED

VIDEO IN

AUDIO IN

Your TV

Standard

Definition

Go To

Connections

2. Connect the cables by following the illustrations below.

Connecting to a TV using an HDMI cable (Best)

COMPONENT VIDEO OUT

SBL

CSLFL

YPBP

SBR

BITSTREAM / PCM

HDMI OUT

OPTICAL

SW SR FR

VIDEO

MULTI CHANNEL AUDIO OUTPUT

AUDIO OUT

OUT

AC IN

LANRLUSB

Your TV

HDMI cable

HDMI OUT

Notes:

Do not tilt the connector when inserting it into the HDMI jack, and make sure the shapes of the jack and the connector • are matched. When using non-HDCP compatible TV, the image will not display properly.• An HDMI cable carries both video and audio signals. If you want to use TV speakers, you do not need to make an • additional audio connection if you are using an HDMI cable.

Connecting to a TV using a component video cable (Better)

COMPONENT VIDEO OUT

SBL

CSLFL

YPBP

BITSTREAM / PCM

VIDEO

AUDIO OUT

HDMI OUT

OPTICAL

OUT

YPBP

COMPONENT VIDEO OUT

BPR

ANALOG AUDIO

OUTPUT

SBR

SW SR FR

MULTI CHANNEL AUDIO OUTPUT

component video cable

composite audio cable

AC IN

LAN USB

HDMI IN

COMPONENT

VIDEO IN

PR/CR

PB/CB

Your TV

AUDIO IN

Connecting to a TV using an A/V cable (Good)

COMPONENT VIDEO OUT

SBL

CSLFL

AC IN

LAN USB

BITSTREAM / PCM

HDMI OUT

AUDIO OUT

OPTICAL

ANALOG AUDIO

OUTPUT

BPR

SBR

SW SR FR

VIDEO

MULTI CHANNEL AUDIO OUTPUT

OUT

VIDEO

OUTPUT

composite audio video cable

VIDEO IN

AUDIO IN

Your TV

Connecting to an Audio System

When you change the connections, all devices should be turned off.• Refer to the manual accompanying external devices for more information.•

Via 2-Channel Analog Audio Output

COMPONENT VIDEO OUT

SBL

CSLFL

AC IN

LAN USB

Via Digital Audio Output

AC IN

LAN USB

BITSTREAM / PCM

HDMI OUT

OPTICAL

ANALOG AUDIO

BITSTREAM / PCM

HDMI OUT

OPTICAL

AUDIO OUT

OUTPUT

COMPONENT VIDEO OUT

AUDIO OUT

BPR

SBR

VIDEO

MULTI CHANNEL AUDIO OUTPUT

OUT

SBL

BPR

SBR

VIDEO

MULTI CHANNEL AUDIO OUTPUT

OUT

SW SR FR

composite audio cable

CSLFL

SW SR FR

AUDIO IN

DIGITAL AUDIO INPUT

OPTICAL

Stereo system

CONNECTIONS

AV receiver / amplifier

BITSTREAM/PCM

OPTICAL

digital audio optical cable

Via HDMI Audio Output

COMPONENT VIDEO OUT

SBL

CSLFL

AC IN

LAN USB

HDMI OUT

Digital Audio Optical Cable and HDMI Cable NOT INCLUDED.

BPR

SBR

SW SR FR

BITSTREAM / PCM

VIDEO

HDMI OUT

MULTI CHANNEL AUDIO OUTPUT

AUDIO OUT

OPTICAL

OUT

HDMI cable

AV receiver / amplifier

with an HDMI input jack

HDMI IN

Connections

Network Connection

Your Blu-ray disc player can be connected to your home network:

By connecting an Ethernet cable to the ETHERNET jack on the rear of your player and to a wired hub or router. Using • a wired network provides the best performance, because the attached devices connect directly to the network and are not subject to radio frequency interference. By connecting through the built-in wireless device and a wireless access point or router.•

Connecting your player to a wired router:

Connect an Ethernet cable (CAT5 or better with RJ45 connector) to the • ETHERNET jack on the back of your player and to an Ethernet jack on a hub or broadband router.

Networking equipment

(modem, etc.)

LAN

LAN cable

Internet

AC IN

WAN LAN

LAN

COMPONENT VIDEO OUT

BPR

BITSTREAM / PCM

HDMI OUT

AUDIO OUT

LAN USB

OPTICAL

Hub or broadband router

Notes:

Do not connect a modular • phone cable to the ETHERNET jack. When plugging or unplugging •

12345

LAN cable

SBL

CSLFL

SBR

SW SR FR

VIDEO

MULTI CHANNEL AUDIO OUTPUT

OUT

the cable, hold the connector on the end of the cable. When unplugging, do not pull on the cable. Press down the lock tab and pull the connector out of the jack. Because there are various • connection configurations, follow the instructions from your telecommunication carrier or Internet service provider.

Connecting your player to a wireless access point or router:

Your Blu-ray disc player has an integrated Wi-Fi device and antenna. No physical connection to the wireless router is necessary.

Conﬁ gure your player to access the wireless access point or router. For more information, see “Conﬁ guring a wireless • Internet connection” on page 28. The network conﬁ guration and connection method may vary depending on the equipment in use and the network • environment. Your Blu-ray disc player is equipped with an IEEE 802.11n wireless module, which also supports the

802.11 a/b/g/n standards. For the best wireless performance, we recommend using an IEEE 802.11n certiﬁ ed Wi-Fi network (access point or wireless router).

Notes:

You must use a wireless IP sharer that suppor ts IEEE 802.11 a/b/g/n. • (n is recommended for stable operation of the wireless network.)

Wireless LAN, in its nature, may cause interference, depending on the • use condition (AP performance, distance, obstacle, interference by other radio devices, etc.).

Modem Port

Modem Cable

Wireless access point

Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not • supported.

When applying the security key for the AP (wireless IP sharer), only • the following is supported.

1) Authentication Mode : WPAPSK, WPA2PSK

2) Encryption Type : WEP, TKIP, AES

Connecting the Speakers (For 7.1 Audio Channel)

You can connect the speakers as shown in the following diagram to obtain the 7.1 audio channels effects. Using the audio cables, connect the MULTI CHANNEL AUDIO OUTPUT (SBL, SBR, C, SW, SL, SR, FL & FR) terminals on the rear of the Blu-ray disc player to 7.1 Channel ANALOG AUDIO IN ter minals of your Ampliﬁ er.

For speaker conﬁ guration, please refer to “Speaker Setting” on page 34.

COMPONENT VIDEO OUT

SBL

CSLFL

BPR

LAN USB

SBR

SW SR FR

BITSTREAM / PCM

VIDEO

HDMI OUT

MULTI CHANNEL AUDIO OUTPUT

AUDIO OUT

OPTICAL

OUT

SBL

CSLFL

SBR

SW SR FR

MULTI CHANNEL AUDIO OUTPUT

AC IN

CONNECTIONS

7.1 Channel Amplifier

Notes:

Please turn the volume down when you turn on the Ampliﬁ er. Sudden loud sound may cause damage to the speakers • and your ears. The position of terminals may vary depending on the Ampliﬁ er. Please refer to the user’s manual of your Ampliﬁ er.• The front left and right outputs on your player and 7.1 channel ampliﬁ er must be connected to hear disc menu audio • from certain Blu-ray discs. When connecting to a 5.1 channel home theater or receiver, connect all the • from the player except for the SBL (Surround Back Left) / SBR (Surround Back Right) outputs.

MULTI CHANNEL AUDIO OUTPUT jacks

Connections

Positioning the Speakers (For 7.1 Audio Channel)

How you set up your speakers can affect the bass and the sound ﬁ eld. Note the following points:

Place speakers on ﬂ at secure bases.• Placing speakers too close to ﬂ oors, walls, and corners can result in excessive bass. Cover walls and windows with • thick curtains.

Keep your speakers at least 10 mm away from the system for proper ventilation.•

Setup example (For 7.1 audio channels)

Subwoofer

Place to the right or left of the TV, on the floor or a sturdy shelf so that it will not cause vibration. Leave about 30 cm from the TV.

Surround Back speakers

(may be elevated above the listener)

Place the surround back speakers behind the listening position - slightly to the left and right at about 140

Front speakers

Place the left and right front speakers equidistant from the center speaker, about 30 angle from the center channel.

-150o from the center speaker.

Center speaker

Place the center speaker directly in front of the

listening area, either above or below the TV. Vibration caused by the speaker can disrupt the picture if it is placed on directly on the TV.

Main unit

To allow for proper ventilation and to maintain good airflow around the main unit, position it with at least 5 cm of space on all sides.

AV receiver

Place the AV receiver directly in front of the listening area, either above or below the TV.

Left & Right Surround speakers

(may be elevated above the listener)

Place the left and right surround speakers to the left and right side of the listening position, in line with or slightly behind the listening position -

-110o from the center.

about 90

Note:

The above setup illustration is a basic overview on what to expect when hooking speakers up to your home theater system. The placement may vary depending on how many and what type of loudspeakers you have, as well as your room size, shape, and acoustical properties.

Playback

Information on Playback

Before you start playing back a disc, read the following information.

Playable Discs and Files

This unit is compatible to play back the following discs / ﬁ les.

To play back a disc / ﬁ le, make sure that it meets the requirements for region codes and color systems as described below. You can play back discs that have the following logos.

Other disc types are not guaranteed to play back.

Playable discs Logos

Blu-ray Disc

- BD-ROM (single / dual layer)

- BD-RE (single / dual layer) (Recorded in BDMV format)

- BD-R (single / dual layer)(Recorded in BDMV format) (Unclosed discs may not be played back.)

DVD-ROM

DVD-RW

DVD-R

CD-DA (audio CD)

CD-RW

CD-R

DTS-CD -

Playable ﬁ les Media

AVCHD DVD-RW/-R

MP3

Windows Media

JPEG

This unit cannot playback the disc contents protected by

•

Audio

Windows MediaTM Digital Rights Management (DRM).

BD-RE/-R, DVD-RW/-R, CDRW/-R, SD Memory Card (including SDHC), miniSD Card, microSD Card

Readable cards Playable ﬁ les/data

SD Memory Card (8 MB - 2 GB)

SDHC Memory Card (4 GB - 8 GB)

miniSD Card (8 MB - 2 GB)

microSD Card (8 MB - 2 GB)

MP3, Windows Media Audio, JPEG, picturein-picture commentary, subtitles or other extras for BD-ROM

• This unit supports SD Memory Card with FAT12/FAT16 ﬁ le system, and SDHC Memory Card with FAT32 ﬁ le system.

• This unit does not support NTFS ﬁ le system.

• This unit may not read the SD Memory Cards formatted on a computer. If that is the case, please reformat the SD Memory Cards in this unit and try again.

• This unit does not support miniSDHC and microSDHC Memory Card.

• For miniSD Card and microSD Card, the adapter is necessary.

miniSD Card adapter

miniSD Card

microSD Card adapter

microSD Card

• Portions of this product are protected under copyright law and are provided under license by ARIS / SOLANA / 4C.

• Please keep the SD Memory Cards in their cases when you are not using them.

• Do not try to open or modify the card.

• Do not touch the terminal surface with your ﬁ ngers or any metals.

• Do not attach additional labels or stickers to cards.

• Do not remove the label of the SD Memory Cards.

• This unit recognizes up to 8 characters of ﬁ le name in the SD Memory Card. Characters after 8th will not be displayed.

Unplayable Discs and Files

The following discs will not be played back in this unit.

• CD-ROM

• CD-I (compact disc-interactive)

• DVD-RAM

• VSD (video single disc)

• DVD-audio

• HD DVD

• VIDEO CD

• Unﬁ nalized disc

• SACD

• BD / DVD / SD Memory Card contains DivX

• BD / DVD hybrid disc (played back as a BD-video only)

• BD that contains AVCHD ﬁ les

• DVD-RW/-R recorded in non compatible recording format.

• Super Audio CD - Only the sound on the CD layer can be heard. The sound on the high-density Super Audio CD layer cannot be heard.

• Playability of dual discs are not guaranteed.

ﬁ les.

PLAYBACK

Playback

Color Systems

BD-video and DVD-video are recorded in different color systems throughout the world. The most common color system is NTSC (which is used primarily in the United States and Canada).

Region Codes

This unit has been designed to play back BD-video with region “A” and DVD-video with region “1” or “ALL”. You cannot play back BD-video or DVD-video that are labeled for other regions. Look for the symbols on the right on your BD-video or DVD-video.

If these region symbols do not appear on your BD-video or DVD-video, you cannot play back the disc in this unit. The letter or number inside the globe refers to region of the world. A BD-video or DVD-video labeled for a speciﬁ c region can only be played back in the unit with the same region code.

BD-video

DVD-video

Structure of Disc/SD Card Contents

The contents of BD / DVD / AVCHD are generally divided into titles. Titles may be further subdivided into chapters.

BD / DVD / AVCHD

title 1 title 2

chapter 1

Audio CD is divided into tracks.

Data discs, USB device, SD Memory Cards containing MP3 / WMA /JPEG are divided into folders, and the folders are subdivided into ﬁ les.

chapter 2 chapter 2chapter 1 chapter 3

track 1 track 2 track 3 track 4 track 5

audio CD

MP3 / WMA / JPEG

folder (group) 1

file 1

file 2 file 3 file 4 file 5

folder (group) 2

Playing a Disc

This section shows you the basics on how to play a disc.

CAUTION:

Keep your ﬁ ngers well clear of the disc tray as it is closing. Neglecting to do so may cause serious personal injury.

Basic playback

Preparations

• When you want to view a disc, turn on the TV and select the video input connected to the Blu-ray disc player.

Press the ON/STANDBY button.

Press OPEN/CLOSE.

Place the disc on the disc tray.

The Blu-ray disc player turns on.

The disc tray opens.

With the playback side down

Press OPEN/CLOSE to close the disc tray.

If you insert a Blu-ray disc or a DVD that contains a top menu, a menu may appear. Use to select the title you want to view, then press OK to start playback.

• You may need to press the POPUP/TOP MENU or MENU button to display disc menu (depending on the actual Blu-ray disc or DVD.)

Playback starts.

/ / /

To start playback in the stop mode

Press PLAY.

To pause playback (still mode)

Press PAUSE during playback.

To resume normal playback, press the PLAY button.

• The sound is muted during still mode.

To stop playback

Press STOP. The setup menu is displayed.

To resume normal playback, press / to select DVD/BDROM, then press OK.

• Depending on the disc, playback starts where it stopped or at the beginning of the disc.

If you press STOP twice, playback stops completely.

To stat playback again, press PLAY. Playback starts at

the beginning of the disc.

To remove the disc

Press OPEN/CLOSE.

Remove the disc after the disc tray opens completely.

Be sure to press the OPEN/CLOSE button to close the disc tray after you remove the disc.

To turn the power off

Press ON/STANDBY button to turn the unit off.

PLAYBACK

+ 43 hidden pages