The model number and serial number are on the back
of this unit. Record these numbers in the spaces
below. Refer to these numbers whenever you communicate
with your Toshiba dealer about this unit.
E5RJ2ED_EN.book Page 2 Thursday, October 29, 2009 3:30 PM
INTRODUCTION
Safety Instructions
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The important note is located on the rear or bottom of
the cabinet.
Caution
1.Do not attempt to open the cabinet. There are no
parts inside you can service. Refer all servicing to
qualified service personnel.
2.Slots and openings in the cabinet at the sides and
underneath are provided for ventilation. To ensure
reliable operation and to protect the unit from
overheating, these openings must not be blocked or
covered.
Avoid installation in enclosed spaces such as
bookcases unless suitable ventilation is provided.
3.Keep the unit away from radiators and other heat
sources.
4.Avoid use near strong magnetic fields.
5.Do not push objects of any kind into the unit through
the cabinet slots or openings as they could touch
electrically live parts or short circuit parts resulting in
a fire or electric shock.
6.To prevent fire or shock hazard, do not expose this
apparatus to dripping or splashing, no objects filled
with liquids, such as vases, should be placed on the
apparatus.
7.Do not stand the unit vertically. Use the unit in a
horizontal (flat) position only.
8.This product is in Stand-by mode when turned off
while the mains cable is connected.
9.Do not place a flaming object such as a burning
candle on the apparatus.
10. Before moving the unit, be sure to remove any media
and unplug the mains cable from the AC outlet.
11. Disconnect the mains plug to shut off the unit, if you
suspect a fault has developed, or if it will not be used
for an extended period.
12. The mains plug shall remain readily operable and
accessible.
13. Read both instruction manuals to ensure correct and
safe installation and interconnection of the unit in
multimedia systems.
14. Keep a distance of 20 cm around the ventilation
openings of the apparatus.
15. Do not overload wall outlets; extension cords, or
integral convenience receptacles as this can result in a
risk of fire or electric shock.
The lightning ash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sucient magnitude
to constitute a risk of elec tric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
The symbol for CLASS ll (Double Insulation)
16. Do not use a cracked , deformed, or repaired disc.
These discs are easily broken and may cause serious
personal injury and apparatus malfunction.
17. If the apparatus should smoke or smell, immediately
disconnect the power cord from the wall outlet.Wait
until the smoke or smell stops, then ask your dealer
for a check and repair. Neglecting to do so may cause
fire.
18. While it is thundering, do not touch the connecting
cables or the apparatus.
Laser Safety
This unit employs a laser. Only a qualified service person should
remove the cover or attempt to service this device, due to
possible eye injury.
CAUTION:
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION EXPOSURE.
CAUTION:
CLASS 2 LASER RADIATION WHEN OPEN
DO NOT STARE INTO THE BEAM
LOCATION:
• INSIDE, NEAR THE BD
MECHANISM
Avoid the Hazards of Electrical Shock and Fire
• Do not handle the mains cable with wet hands.
• Do not pull on the mains cable to disconnect it from AC outlet.
Grasp it by the plug.
• If, by accident, water is spilled on the unit, unplug the mains
cable immediately and take the unit to an authorised service
centre for servicing.
Moisture Condensation Warning
Moisture condensation may occur inside the unit when it is
moved from a cold place to a warm place, after heating a cold
room, or under conditions of high humidity. Do not use the unit
for at least 2 hours to allow the inside to dry.
2EN
E5RJ2ED_EN.book Page 3 Thursday, October 29, 2009 3:30 PM
INTRODUCTION
Connection to Power
Before Switching on make sure that the voltage of your electricity
supply is the same as that indicated on the rating plate.
Power Supply
The power supply is connected and the unit is live when the
mains cable is plugged into a 220 - 240 V~, 50 Hz AC outlet.
To operate the unit, press [ON/STANDBY Q].
WARNING: LIVE PARTS INSIDE.
Installation Location
For safety and optimum performance of this unit:
• Install the unit in a horizontal and stable position.
• Keep the unit away from electronic equipment such as an
amplifier, TV, etc. to prevent warping, damage, fire and
malfunction.
• Do not place anything directly on top of the unit.
• Shield the unit from direct sunlight and keep away from sources
of intense heat. Avoid dusty or humid locations. Avoid locations
with insufficient ventilation for suitable heat dissipation. Do not
block the ventilation holes on the sides of the unit. Avoid
locations subject to strong vibration or strong magnetic fields.
• Do not locate near water.
Do not place the unit on the furniture that is capable of being
tilted by a child and an adult leaning, pulling, standing or
climbing on it. A falling unit can cause serious injury or even
death.
“This product is marked with “CE” and complies therefore with the
applicable harmonised European standards listed under the Low
Voltage Directive 2006/95/EC and the EMC Directive 2004/108/EC.”
Responsible for CE-marking is
TOSHIBA INFORMATION SYSTEMS (U.K.) LTD, Toshiba Court,
Weybridge Business Park, Addlestone Road, Weybridge, Surrey,
KT15 2UL, United Kingdom
Other Precautions
About Recycle
A NOTE ABOUT RECYCLING
This product’s packaging materials are recyclable and can be
reused. Please dispose of any materials in accordance with your
local recycling regulations.
This product consists of materials which can be recycled and
reused if disassembled by a specialised company.
Following information is only for EU-member states:
The use of the symbol indicates that this product may not be
treated as household waste. By ensuring this product is
disposed of correctly, you will help prevent
potential negative consequences for the
environment and human health, which could
otherwise be caused by inappropriate waste
handling of this product. For more detailed
information about recycling of this product,
please contact your local city office, your
household waste disposal service or the shop
where you purchased the product.
Following information is only valid EU-member States:
Disposal of batteries and/or accumulators
The crossed out wheeled dust bin symbol indicates that
batteries and/or accumulators must be collected and disposed
of separately from household waste. If the battery or
accumulator contains more than the specified values of lead
(Pb), mercury (Hg), and/or cadmium (Cd) defined in the Battery
Directive (2006/66/EC), then the chemical symbols for lead (Pb),
mercury (Hg) and/or cadmium (Cd) will appear below the
crossed out wheeled dust bin symbol. By participating in
separate collection of batteries, you will help to assure the
proper disposal of products and batteries and
thus help to prevent potential negative
consequences for the environment and human
health. For more detailed information about the
collection and recycling programmes available in
your country, please contact your local city office
or the shop where you purchased the product.
Make your contribution to the environment!!!
• Exhausted batteries do not belong in the dustbin.
• You can dispose of them at a collection point for
exhausted batteries or special waste.
• Contact your council for details.
Pb, Hg, Cd
3EN
E5RJ2ED_EN.book Page 4 Thursday, October 29, 2009 3:30 PM
INTRODUCTION
About Copyright
Unauthorised copying, broadcasting, public performance and
lending of discs are prohibited. This product incorporates
copyright protection technology that is protected by U.S. patents
and other intellectual property rights. Use of this copyright
protection technology must be authorised by Macrovision, and is
intended for home and other limited viewing uses only unless
otherwise authorised by Macrovision. Reverse engineering or
disassembly is prohibited.
About Maintenance
Cleaning the Unit
Use a soft cloth slightly moistened with a mild detergent solution.
Do not use solutions containing alcohol, spirits, ammonia or
abrasive.
Cleaning Discs
If a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc
from the centre out. Do not wipe in a circular motion.
Do not use solvents such as benzine, thinner, commercially
available cleaners, detergent, abrasive cleaning agents or
antistatic spray intended for analogue records.
Disc Handling
Handle the discs so that fingerprints and dust do not adhere to
the disc surfaces.
Always store the disc in its protective case when it is not in use.
Servicing
If the unit becomes inoperative, do not try to correct the problem
by yourself. There are no user serviceable parts inside. Turn the
unit off, unplug the mains cable, and consult your dealer or an
authorised service centre.
Cleaning the Disc Lens
If the unit does not perform correctly even though you have
referred to “Troubleshooting” and the relevant sections in the
Owner’s Manual, the laser optical pickup unit may be dirty.
Consult your dealer or an authorised service centre for inspection
and cleaning of the laser optical pickup unit.
IR Signal Check
• If the remote control is not working properly, you can use
a digital camera (including a cellular phone with built-in
camera) to see if it is sending out an infrared signal.
With a digital camera
(including built-in cell phone cameras):
Point a digital camera towards the
remote control. Push any button on the
remote control and look through the
digital camera. If the infrared light
appears through the camera, the remote
control is working.
About Remote Control
Installing the Batteries in the Remote Control
Install 2 R6 (1.5V) batteries matching the polarity indicated
inside battery compartment of the remote control.
2)1)3)2)1)3)
Make sure to match + and - on the batteries to the marks
indicated in the battery compartment.
Caution
Incorrect use of batteries can result in hazards such
as leakage and bursting. Please observe the
following:
• Do not mix new and old batteries together.
• Do not use different kinds of batteries together.
Although they may look similar, different batteries
may have different voltages.
• Make sure that the + and - ends of each battery
match the indications in the battery compartment.
• Remove batteries from battery compartment that
are not going to be used for a month or more.
• When disposing of used batteries, please comply
with governmental regulations or environmental
public rules that apply in your country or area. (Refer
to page 3.)
• Do not recharge, short-circuit, heat, burn or
disassemble batteries.
Using a Remote Control
Keep in mind the following when using the remote
control:
• Make sure that there are no obstacles between the
remote control and the infrared sensor window on the
unit.
• Remote operation may become unreliable if strong
sunlight or fluorescent light is shining on the infrared
sensor window of the unit.
• Remote control for different devices can interfere with
each other. Avoid using remote control for other device
located close to the unit.
• Replace the batteries when you notice a fall off in the
operating range of the remote control.
• The maximum operable ranges from the unit are as
follows.
- Line of sight: approx. 7 m
- Either side of the centre: approx. 5 m within 30°
- Above: approx. 5 m within 15°
- Below: approx. 3 m within 30°
PAUSE STOP PLAY
OPEN/CLOSE
ON/STANDBY
Because of problems and errors that can occur during
the creation of DVD and CD software and/or the
manufacture of DVD and CD discs, Toshiba cannot
5 m7 m5 m
30˚30˚
assure that this Blu-ray Disc Player will successfully play
every disc or every feature of every disc bearing the
DVD logo and/or every CD bearing the CD logo. As one
of the creators of DVD technology, Toshiba DVD players
are manufactured using the highest standards of
quality, and as a result, such incompatibilities are rare.
4EN
E5RJ2ED_EN.book Page 5 Thursday, October 29, 2009 3:30 PM
“x.v.Color” and
“x.v.Color” logo are
trademarks of Sony
Corporation.
“Blu-ray Disc” and are trademarks.
is a trademark of DVD Format/Logo Licensing
Corporation.
“AVCHD” and the
“AVCHD” logo are
trademarks of Panasonic
Corporation and Sony
Corporation.
“BONUSVIEW” is
trademark of Blu-ray Disc
Association.
“BD-LIVE” logo is
trademark of Blu-ray Disc
Association.
Java and all other Java
trademarks and logos are
trademarks or registered
trademarks of Sun
Microsystems, Inc. in the
United States and/or
other countries.
®
DivX
, DivX Certified®,
and associated logos are
trademarks of DivX, Inc.
and are used under
license.
Windows Media and the
Windows logo are
trademarks or registered
trademarks of Microsoft
Corporation in the
United States and/or
other countries.
is trademark of Eastman Kodak Company.
THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL
PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND
NON-COMMERCIAL USE OF A CONSUMER FOR (i)
ENCODING VIDEO IN COMPLIANCE WITH THE MPEG-4
VISUAL STANDARD (“MPEG-4 VIDEO”) AND/OR (ii)
DECODING MPEG-4 VIDEO THAT WAS ENCODED BY A
CONSUMER ENGAGED IN A PERSONAL AND NONCOMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM
A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE
MPEG-4 VIDEO. NO LICENSE IS GRANTED OR SHALL BE
IMPLIED FOR ANY OTHER USE. ADDITIONAL
INFORMATION INCLUDING THAT RELATING TO
MPEG Layer-3 audio coding technology licensed from
Fraunhofer IIS and Thomson.
PROMOTIONAL, INTERNAL AND COMMERCIAL USES AND
LICENSING MAY BE OBTAINED FROM MPEG LA, L. L. C.
SEE HTTP://WWW.MPEGLA.COM
6EN
E5RJ2ED_EN.book Page 7 Thursday, October 29, 2009 3:30 PM
INTRODUCTION
Features
BD-Java
With some BDs which support Java applications, you can
enjoy the interactive functions such as games or interactive
menus.
BD-Live
BD-Live (BD-ROM version 2 Profile 2.0) that allows interactive
functions to be used when this unit is connected to the
Internet in addition to the BONUSVIEW function. The various
functions differ depending on the disc.
Full High-Definition Video Playback
Watch movies in the highest picture quality available for your
HDTV. This unit offers full high-definition video playback up to
1080p resolution for an amazing viewing experience. A highly
detailed picture and increased sharpness delivers a more trueto-life picture.
DVD Upconversion for Enhanced Picture Quality
Your current DVD will look even better than before thanks to
video upconversion. Upconversion will increase the
resolution of standard definition DVD to high definition up to
1080p over an HDMI connection. The picture will be less
jagged and more realistic for a near high-definition
experience.
Enjoy Your Content on Different Kinds of Media
Full backwards compatibility with BD, DVD, CD and SD card
ensures that you can continue to enjoy your current audiovideo collection. Additionally, you can enjoy AVCHD/DivX
MP3/WMA/JPEG files.
Experience Rich Multi-Channel Surround Sound
Multi-channel surround sound, which recognises real-to-life
sound and makes you feel like you are really there.
PIP (BONUSVIEW)
Some BD-video have the PIP function which enables you to
display the secondary video in the primary video. You can call
up the secondary video by pressing [PIP] whenever the scene
contains the secondary video.
Pop-up Menu
Some BD-videos have pop-up menu which is a navigation
menu that can be called up and be operated on the TV screen
without interrupting the playback. You can call up the pop-up
menu by pressing [POP MENU / MENU]. Contents in the
pop-up menu vary depending on the disc.
x.v.Color
This unit supports playback of video contents on discs
recorded with “x.v.Color” technology. To watch this video
content with the “x.v.Color”, a TV or other display device
supporting both video image reproduction using the
“x.v.Color” standard and capable of manually switching it’s
colour setting is required. Please refer to the owner’s manual
of your display device for further information.
Easy and Simple Connection to Your HDTV via HDMI
You can connect this unit to your HDTV with one single HDMI
(High-Definition Multimedia Interface) cable. It is
recommended to use a High Speed HDMI Cable for optimal
compatibility. The high definition video output signal will be
transferred to your HDTV without conversion to analogue
signals, so you will get excellent picture and sound quality,
completely free from noise.
HDMI Deep Colour
Deep Colour reduces the posterisation effect of the playback
image. Refer to “HDMI Deep Color” in “FUNCTION SETUP” on
page 28.
This unit supports HDMI CEC, which allows integrated system
control over HDMI and is part of the HDMI standard.
This function may not work properly on some devices.
HDMI 1080p24 Output (BD Only)
®
This unit is equipped with a feature which can provide the
/
smooth movement in the playback of film originated material
with the frame rate of 24 frames per second with progressive
scan. (Available only when the TV is connected by an HDMI
cable and compatible with 1080p24 frame input.)
Refer to “HDMI Video Resolution” in “FUNCTION SETUP” on
page 28.
HDCP Compatible
To play back the digital video images of a BD / DVD via an
HDMI connection, it is necessary that both the unit and the TV
(or an AV amplifier) support a copyright protection system
called HDCP (high-bandwidth digital content protection
system). HDCP is copy protection technology that comprises
data encryption and authentication of the connected AV
device. This unit supports HDCP. Please read the operating
instructions of your TV (or AV amplifier) for more information.
Playback in slightly faster speed while keeping the sound
output.
Rapid playback is available only on discs recorded in the
Dolby Digital format.
Playback of Content from an SD Card
You can play back AVCHD/MP3/WMA/JPEG stored in an SD
card.
You can store picture-in-picture commentary, subtitles or
other extras for BD-ROM ver. 2 (Profile 2.0 / Profile 1.1) files in
an SD card and play them back with the BD-video.
Playing Back AVCHD Files
This unit supports playback of AVCHD format files (new
format for high definition video camcorders) recorded on
disc/SD card. Your high definition personal archive is playable
in HD quality.
7EN
E5RJ2ED_EN.book Page 8 Thursday, October 29, 2009 3:30 PM
INTRODUCTION
Functional Overview
Front Panel
12
ON/STANDBY
(*) The unit can also be turned on by pressing these buttons.
1. ON/STANDBY Q button
• Press to turn on the unit, or to
turn the unit into the standby
mode. (To completely turn off
the unit, you must unplug the
mains cable.)
4 5*7896*
3
PAUSE STOPPLAY
OPEN/CLOSE
2. ON/STANDBY Q indicator
3. PAUSE F button
4. STOP C button
5. PLAY B button*
6. OPEN/CLOSE A button*
Rear Panel
4
DIGITAL OUT
PCM/BITSTREAM
6
3
PR/C
R
YL
PB/C
R
COAXIALOPTICAL
AUDIO
OUT
B
VIDEO
COMPONENT
VIDEO OUT
7
6. DIGITAL OUT (OPTICAL /
7. VIDEO OUT jack
21
HDMI
LAN
OUT
1. LAN terminal
2. HDMI OUT jack
3. AUDIO OUT jacks
4. COMPONENT VIDEO OUT jacks
5. Mains cable
COAXIAL) jacks
10
7. Disc tray
8. Display
9. Infrared sensor window
10. SD card slot
5
Caution
• Do not touch the inner pins of
the jacks on the rear panel.
Electrostatic discharge may
cause permanent damage to the
unit.
Remote Control
1
2*
3
4
5
6
7
8
9
10
11*
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
(*) The unit can also be turned on by pressing
these buttons.
1. HDMI button
2. OPEN/CLOSE A button*
3. Number buttons
4. SEARCH button
5. Red / Green / Yellow / Blue
buttons
6. TOP MENU button
7. K / L / s / B buttons
8. SETUP button
9. REV E button
10. SKIP H button
11. PLAY B button*
12. MODE button
13. REPEAT button
14. PIP button
15. ON/STANDBY Q button
• Press to turn on the unit, or to
turn the unit into the standby
mode. (To completely turn off
the unit, you must unplug the
mains cable.)
16. ANGLE button
17. AUDIO button
18. SUBTITLE button
19. DISPLAY button
20. CLEAR button
21. POP MENU / MENU button
22. ENTER button
23. RETURN button
24. FWD D button
25. SKIP G button
26. STOP C button
27. PAUSE F button
28. A-B button
8EN
E5RJ2ED_EN.book Page 9 Thursday, October 29, 2009 3:30 PM
INTRODUCTION
Front Panel Display
12
3
* Brightness of the display can be adjusted. Refer to “Panel Display” in
“FUNCTION SETUP” on page 30.
1. Displays repeat icon. (Appears during repeat
playback.)
2. Displays media icon (disc mode or SD card mode).
3. Displays playback status icon. Refer to the table
below.
4. Displays various kinds of information such as title
number, elapsed playing time, repeat type, menu
type, etc.
Playback status iconMode
4
Playback is in progress
Stop mode
Pause mode
Symbols Used in this Manual
To specify for which media type each function is, we put the
following symbols at the beginning of each item to operate.
SymbolDescription
Description refers to BD-video and BD-RE
(ver.2.1) / BD-R (ver.1.1/1.2/1.3) recorded in
BDMV format
Description refers to DVD-video
Description refers to audio CD / DTS-CD
Description refers to DVD-RW/-R and SD card
with AVCHD files
Description refers to BD-RE/-R, DVD-RW/-R
and CD-RW/-R with DivX
Description refers to BD-RE/-R, DVD-RW/-R,
CD-RW/-R and SD card with MP3 files
Description refers to BD-RE/-R, DVD-RW/-R,
CD-RW/-R and SD card with Windows Media™
Audio files
Description refers to BD-RE/-R, DVD-RW/-R,
CD-RW/-R and SD card with JPEG files
If you do not find any of the symbols listed above under the
function heading, the operation is applicable to all media.
• Do not tilt the connector when inserting it into the HDMI jack, and make sure the shapes of the jack and the
connector are matched.
• When using non-HDCP compatible TV, the image may not be displayed properly.
Component Video + Standard Audio Connection
02#
2
9,
0"#
"
2
#/!8)!,/04)#!,
!5$)/
6)$%/
B
($-)
,!.
/54
0#-")4342%!-
#/-0/.%.4
$)')4!,/54
/54
6)$%//54
component
video cable
COMPONENT
VIDEO IN
Y
Your TV
02#
!5$)/
9,
2
/54
0"#
#/-0/.%.4
6)$%//54
2
"
Standard Video + Standard Audio Connection
C
($-)
,!.
/54
0#-")4342%!-
02#
2
9,
0"#
"
2
#/!8)!,/04)#!,
!5$)/
6)$%/
#/-0/.%.4
$)')4!,/54
/54
6)$%//54
,
composite video cable
2
!5$)/
/54
6)$%/
composite audio cable
composite audio cable
PR/CR
PB/CB
VIDEO IN
L
AUDIO IN
R
Your TV
L
AUDIO IN
R
11EN
E5RJ2ED_EN.book Page 12 Thursday, October 29, 2009 3:30 PM
CONNECTIONS
Connection to an Audio System
2-Channel Analogue Audio
Digital Audio ConnectionHDMI Audio Connection
Connection
Stereo system
AUDIO IN
LR
composite audio cable
L
PR/C
R
YL
PB/C
B
R
COAXIALOPTICAL
AUDIO
VIDEO
HDMI
COMPONENT
DIGITAL OUT
OUT
LAN
OUT
PCM/BITSTREAM
VIDEO OUT
AUDIO
R
OUT
Digital audio optical / coaxial cable and HDMI cable NOT INCLUDED
Composite audio cable included
Network Connection with LAN
• You can use a disc which offers BD-Live function by
connecting the unit to the Internet.
(For BD-Live information, please refer to page 23.)
Networking equipment
(modem, etc.)
AV receiver / amplifier
DIGITAL AUDIO INPUT
DIGITAL AUDIO INPUT
OPTICAL
digital audio optical
cable
PR/C
R
YL
PB/C
B
R
COAXIALOPTICAL
AUDIO
VIDEO
HDMI
COMPONENT
DIGITAL OUT
OUT
LAN
PCM/BITSTREAM
OUT
VIDEO OUT
DIGITAL OUT
PCM/BITSTREAM
• Refer to page 34 for digital audio setting. • Refer to page 33 for HDMI audio setting.
Finding the Video Channel on Your TV
After you have completed all the connections, you must
find the correct video channel (external input channel) on
your TV.
Hub or broadband router
1 After you have made all the necessary
AV receiver / amplifier with an
HDMI input jack
COAXIAL
digital audio
coaxial cable
COAXIALOPTICAL
R
COAXIALOPTICAL
AUDIO
HDMI
DIGITAL OUT
OUT
LAN
OUT
PCM/BITSTREAM
HDMI IN
HDMI cable
PR/C
R
YL
PB/C
B
VIDEO
COMPONENT
VIDEO OUT
HDMI
OUT
connections, turn on the unit and your TV.
LAN
LAN cable
WANLAN
LAN cable
Internet
LAN
PR/C
R
YL
PB/C
B
R
COAXIALOPTICAL
AUDIO
VIDEO
HDMI
COMPONENT
DIGITAL OUT
OUT
LAN
OUT
PCM/BITSTREAM
VIDEO OUT
Networking equipment, hub or broadband router and
cables NOT INCLUDED
Caution
• Do not insert any cable other than a LAN cable to the
LAN terminal to avoid damaging the unit.
Note
• After connecting a LAN cable, set up necessary
network settings.
• If your network equipment (modem, etc.) does not
have broadband router functions, connect a
broadband router.
• If your network equipment (modem, etc.) has
broadband router functions but there is no vacant
port, use a hub.
• For a broadband router, use a router which supports
10BASE-T/100BASE-TX.
• Do not connect your PC directly to the LAN terminal
of this unit.
• For the network setup, refer to “Network Connection”
on pages 36-38.
2 Press the button on the TV’s remote
12345
control that accesses the external input
channel repeatedly until you see the
opening screen. It may be labelled
“F (for TOSHIBA TV)”, “SOURCE”, “AV”
or “INPUT” (refer to your TV’s user
manual).
Note
• If the TV is connected by an HDMI cable, please allow
a few minutes for the opening screen to display.
12EN
E5RJ2ED_EN.book Page 13 Thursday, October 29, 2009 3:30 PM
PLAYBACK
Information on Playback
Before you start playing back a disc, read the following information.
Playable Media
This unit is compatible to play back the following discs / files.
To play back a disc / file, make sure that it meets the
requirements for region codes and colour systems as
described below. You can play back discs that have the
following logos.
Other disc types are not guaranteed to play back.
- BD-R ver. 1.1 / 1.2 / 1.3 (single / dual layer)
(Recorded in BDMV format) (Unclosed
discs may not be played back.)
DVD-video
DVD-RW
DVD-R
CD-DA (audio CD)
CD-RW
CD-R
• ABOUT DIVX VIDEO: DivX® is a digital video format
created by DivX, Inc. This is an official DivX Certified
device that plays DivX video. Visit www.divx.com for
more information and software tools to convert your files
into DivX video.
• ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified
device must be registered in order to play DivX Video-onDemand (VOD) content. To generate the registration
code, locate the DivX VOD section in the device setup
menu. Go to vod.divx.com with this code to complete the
registration process and learn more about DivX VOD.
• Official DivX
DivX
playback of DivX
• Discs containing the DivX
(Global Motion Compensation) playback feature, which is
DivX
this unit.
It is recommended that files to be played back in this
unit are recorded under the following specifications:
DivX
Official DivX Certified® product
• Playable codec of AVI files :
• Maximum size of a video : 1920 x 1080 @ 60 fps
• Sampling frequency of
audio
• Audio type: MPEG1 audio layer 3
MP3/Windows Media™ Audio
• Sampling frequency : 32 kHz, 44.1 kHz or 48 kHz
• Constant bit rate: 112 kbps - 320 kbps (MP3),
JPEG
• Upper limit: 2,560 x 1,900 dots (sub
• Lower limit: 32 x 32 dots
• File size of image
maximum
®
®
®
®
Certified product; Plays all versions of
video (including DivX®6/DivX®HD) with standard
®
media files.
®
files with the DivX® GMC
supplemental function, cannot be played back on
®
DivX
3.x, DivX®4.x,
®
5.x, DivX®6.x
DivX
: 16 kHz - 48 kHz
(MP3), MPEG1 audio layer
2, Dolby Digital
48 kbps - 192 kbps
(Windows Media™ Audio)
sampling is 4:4:4)
5,120 x 3,840 dots (sub
sampling is up to 4:2:2)
• DVD-RW/-R recorded in non compatible recording
format.
• Super Audio CD - Only the sound on the CD layer can be
heard. The sound on the high-density Super Audio CD
layer cannot be heard.
• Playability of dual discs are not guaranteed.
• This unit cannot play back the disc contents protected by
Windows Media™ Digital Rights Management (DRM).
Colour Systems
BD and DVD are recorded in different colour systems
throughout the world. The most common colour system,
used primarily in the U.K. and other EU countries, is PAL.
This unit uses the PAL system. However, it is also possible
to play back BD and DVD using other colour systems, such
as NTSC.
microSD Card
adapter
microSD
Card
Region Codes
This unit has been designed to play back
BD-video with region “B” and DVD-video
with region “2” or “ALL”. You cannot play
back BD-video or DVD-video that are
labelled for other regions. Look for the
symbols on the right on your BD-video or
DVD-video. If these region symbols do
not appear on your BD-video or DVDvideo, you cannot play back the disc in
this unit. The letter or number inside the
globe refers to region of the world. A BDvideo or DVD-video labelled for a specific
region can only play back on the unit with
the same region code.
BD-video
DVD-video
Structure of Media Contents
The contents of BD / DVD / AVCHD are generally divided
into titles. Titles may be further subdivided into chapters.
BD / DVD / AVCHD
title 1title 2
chapter 1
chapter 2chapter 2chapter 1chapter 3
Audio CD is divided into tracks.
audio CD
track 1track 2track 3track 4track 5
Data discs or SD cards containing DivX
®
/ MP3 / WMA /
JPEG are divided into folders, and the folders are
subdivided into files.
DivX® / MP3 / WMA / JPEG
folder (group) 1
file 1
file 2file 3file 4file 5
folder (group) 2
On-Screen Display
You can check information about the current disc by
pressing [DISPLAY].
To call the on-screen display menu, press [DISPLAY]
during playback. Every time you press [DISPLAY], the
information changes. Depending on the media, available
information varies.
OFF A Title / Chapter information
A Title information (elapsed time)
A Title information (remaining time)
A Decoding format information A OFF
14EN
E5RJ2ED_EN.book Page 15 Thursday, October 29, 2009 3:30 PM
OFF A Chapter information (elapsed time)
A Chapter information (remaining time)
A Title information (elapsed time)
A Title information (remaining time)
A Decoding format information A OFF
OFF (Track information(elapsed time))
A Track information (remaining time)
A Disc information* (elapsed time)
A Disc information* (remaining time)
A OFF (Track information(elapsed time))
(* not available during programme / random playback)