Toshiba BDX1250KB Owner Manual

BDX1250KB

Blu-ray Disc™ Player

Owner’s Manual

English

Contents

1 Important ...................................................................................................................3-4

Safety and important notice...............................................................................................3

Disposal of your old product and batteries.......................................................................3-4

2 Your Product .............................................................................................................. 5-7

Regions codes .................................................................................................................5

Product overview .............................................................................................................6

Remote Control ................................................................................................................ 7

3 Connections ............................................................................................................... 8-9

Connecting to a TV .......................................................................................................... 8

Optional Connection ......................................................................................................... 8

Connect USB device ......................................................................................................... 9

Connect Power ................................................................................................................9

4 Preparation ................................................................................................................. 10

Prepare the remote control ............................................................................................. 10

Setting up the player ...................................................................................................... 10

5 Playback ................................................................................................................. 11-13

Playback Functions .....................................................................................................11-13

6 Customizing ............................................................................................................14-20

General Setting ..........................................................................................................14-18

Display Setting ...........................................................................................................18-19

Audio Setting.............................................................................................................19-20

System information ........................................................................................................ 20

7 Specication ............................................................................................................... 21

8 Troubleshooting .....................................................................................................22-23

9 Glossary ..................................................................................................................24-25

10 License Information ...............................................................................................26-48

English

1 Important

Safety and important notice

Warning:

• Risk of overheating! Never install the product in a conned space. Always leave a space of at least

10cm around the product for ventilation. Ensure curtains or other objects never cover the ventilation slots on the product.

• Never place the product, remote control or batteries near naked ames or other heat sources, including direct sunlight.

• Only use this product indoors. Keep this product away from water, moisture and liquid-lled

objects.

• Never place this product on other electrical equipment.

• Keep away from this product during lightning

storms.

• Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect

device shall remain readily operable.

LASER CAUTION:

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

CAUTION:

VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED. DO NOT STARE INTO BEAM.

LOCATION:

INSIDE, NEAR THE DECK MECHANISM.

EU Conformity Statement

This product is marked with "CE" and complies therefore with the applicable harmonized

European standards listed under the Low Voltage Directive 2006/95/EC and the EMC

Directive 2004/108/EC. ErP Directive 2009/125/ EC Responsible for CE-marking is

TOSHIBA INFORMATION SYSTEMS (U.K.) LTD, Toshiba Court, Weybridge Business Park, Addlestone Road, Weybridge,Surrey,KT15 2UL, United Kingdom

Disposal of your old product and batteries

Following information is only valid for EUmember States: Disposal of products

The crossed out wheeled dust bin symbol indicates that products must be collected and disposed of separately from household waste. Integrated batteries and accumulators can be disposed of with the product. They will be separated at the recycling centres. The black bar indicates that the product was placed on the market after August 13, 2005. By participating in separate collection of products and batteries, you will help to assure the proper disposal of products and batteries and thus help to prevent potential negative consequences for the environment and human health. For more detailed information about the collection and recycling programmes available in your country, please visit our website

http://www.recycle-more.co.uk/ ) or

( alternatively please contact your retailer where the product was purchased.

Disposal of batteries and/or accumulators

The crossed out wheeled dust bin symbol indicates that batteries and/or accumulators must be collected and disposed of separately

Pb,Hg,Cd

from household waste. If the battery or accumulator contains more than the specified values of lead (Pb), mercury (Hg), and/or cadmium (Cd) defined in the Battery Directive (2006/66/EC), then the chemical symbols for lead (Pb), mercury (Hg) and/or cadmium (Cd) will appear below the crossed out wheeled dust bin symbol. By participating in separate collection of batteries, you will help to assure the proper disposal of products and batteries and thus help to prevent potential negative consequences for the environment and human health. For more detailed information about the collection and recycling programmes available in your country, please visit our website

http://www.recycle-more.co.uk/ ) or

( alternatively please contact your retailer where the product was purchased.

General Information

This appliance may be tted with a non-

rewireable plug. If it is necessary to change the fuse in a non-rewireable plug the fuse cover must

be retted. If the fuse cover is lost or damaged,

the plug must not be used until a replacement available from the appliance manufacturer is obtained. If the plug has to be changed because

it is not suitable for your socket, or becomes damaged, it should be cut off and an appropriate plug tted following the wiring instructions below.

English

The plug removed must be disposed of safely as it is hazardous if inserted into a live socket.

IMPORTANT

The wires in this mains lead are coloured in accordance with the following code:

BLUE: NEUTRAL BROWN: LIVE

As the colours of the wires in the mains

lead of this unit may not correspond with the coloured markings identifying

the terminals in your plug, proceed as

follows:

The wire that is coloured blue must be

connected to the terminal in the plug

which is marked with the letter N or

coloured black.

The wire that is coloured brown must

be connected to the terminal which is

marked with the letter L or coloured

red. Do not connect either wire to the earth terminal which is marked by the letter E or by the safety earth symbol green or green-and-yellow. Use a 5A BS1362 fuse which is approved by ASTA or BSI. Always replace the fuse cover after changing the fuse.

Copyright notice This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized

by Rovi Corporation, and is intended for

home and other limited viewing uses only unless otherwise authorized by Rovi Corporation. Reverse engineering or disassembly is prohibited.

or coloured

BONUSVIEW ™

Blu-ray Disc

BONUSVIEWTM, and the logos are

trademarks of the Blu-ray Disc Association.

, Blu-rayTM, BD-LiveTM,

Manufactured under license from Dolby Laboratories. Dolby and the double-D

symbol are trademarks of Dolby

Laboratories.

Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,226,616; 6,487,535; 7,392,195; 7,272,567; 7,333,929; 7,212,872 & other U.S. and worldwide patents issued & pending. DTS-HD, the Symbol, & DTS

‘AVCHD’ and the ‘AVCHD’ logo are

trademarks of Panasonic Corporation and Sony Corporation.

‘DVD Video’ is a trademark of DVD Format/

Logo Licensing Corporation.

Notice for Trademark

HDMI, the HDMI logo and High-Denition Multimedia Interface are trademarks or registered

trademarks of HDMI Licensing LLC in the U

States and other countries.

Oracle and Java are registered trademarks of Oracle and/or its afliates. Other names

may be trademarks of their respective owners.

nited

English

2 Your Product

ALL

Region

U.S.A. and Canada regions

U.K., Europe regions and

Asia Paci c, Taiwan, Korea

Australia, New Zealand, Latin America

Russia and India regions

China, Calcos Islands, Walls and Futuna

Islands

ALL

DVD discs that

can be played

ALL

Japan

Region

North America, Central America, South America, Korea, Japan, Taiwan, Hong Kong and South East Asia.

Europe, Greenland, French territories, Middle East, Africa, Australia and New Zealand.

India, China, Russia, Central and South Asia.

Blu-ray™ discs that

can be played

Regions Codes

Both the Blu-ray Disc discs are coded by region. These regional codes must match in order to play the

disc. If the codes do not match, the disc

will not play.

The Region Number for this Blu-ray DiscTM

Player is described on the rear panel of the Blu-ray DiscTM player.

Player and the

Feature highlights

High-Denition entertainment Watch high-denition content disc with HDTV (High Denition Television). Connect it through a high speed HDMI cable. You can enjoy excellent picture quality up to

1080p resolution with the frame rate of 24 frames per second with progressive scan output.

BD-Live

Connect this player to the movie studios

website via the LAN jack to access a variety of up-to-date content (e.g. refreshed previews and exclusive special

features).

Blu-ray DiscTM Java

Blu-ray DiscTM Java(BD-J) Application

The BD-ROM format supports Java for interactive functions. “BD-J” offers content

providers almost unlimited functionality

when creating interactive BD-ROM titles.

English

Product overview

Main Unit

NO Control Function

B/X

Display panel Show information about the current status of this unit.

IR Sensor Point the remote control at the IR sensor.

Disc compartment Loads a disc into the disc drive.

Turns the power on or restores the unit to the standby mode.

Playback/Pause.

Stop play.

Open or close the disc compartment.

NO Control Function

AC power cord Connects to a standard AC outlet.

COAXIAL jack Output digital audio signals when connecting the coaxial digital cable.

HDMI OUTPUT jack

LAN jack

USB jack Connect a USB ash drive.

Outputs video/audio signals to a connected TV, monitor or AV ampliﬁer. Connect to a TV, monitor or AV ampliﬁer equipped with HDMI input.

Use this to connect to a network with an always-on broadband connection. It is

reserved for future usage of BD-Live™.

English

Remote Control

REMOTE SIGNAL EMITTER

Point remote control to the sensor on the front panel

•

ANGLE

Switch the camera angle during playback

•

Acknowledge/ Conﬁrm menu selection•

to the left / right / up / down

current photo track, but the JPEG playback will be paused

Navigation/ Cursor buttons for moving •

Press

during JPEG playback to rotate the •

Number Buttons

Select numbered items in a menu

Press to enter track/ chapter/ title

numbers/password directly

OPEN/CLOSE

Open/ Close the disc tray•

AUDIO

To select the sound stream; press

repeatedly to select different audio

streams available in your disc

•

SUBTITLE

To display subtitle; press repeatedly

to select different subtitles available

in your disc

•

CLEAR

To clear an entry or the bookmark and program you set

•

TOP MENU

To display the disc title during playback •

RETURN

Return to previous menu

•

POP MENU/MENU

Blu-ray Disc™/DVD video discs

To display a menu included on many •

MC(Media Center)

•

To open/close Media Center

PROGRAM

•

To access program list.

•

DIGEST

To access JPEG thumbnail view during playback

•

Do a slow forward during normal

playback

•

Advance the picture frame by frame during pause mode

chapter or track

DISPLAY

To display a window to locate a title, •

REPEAT A-B

To repeat from A to B•

REPEAT

Selects various repeat mode

•

To search a title, chapter

track or

playing time

•

F.R & F.F

Fast reverse/ fast forward

Instant replay/instant search

Start/

Pause

playback•

PLAY/PAUSE

STOP

Stop playback•

PREV & NEXT

Skip to previous/next chapter/ title/track •

SETUP

Enters or exits the system setup menu

ON / STANDBY

To switch the Blu-ray Disc™ Player to ON or standby mode

•

HDMI

PIP (Picture in Picture)

Switch on or off the secondary video •

PIP AUDIO

ZOOM

•

To zoom out/in

BOOKMARK

•

To bookmark at any point during playback

Switch the secondary audio

of secondary video(PIP) to on or off

•

To change resolution of HDMI video output to fit TV. Such as 1080p,

1080i… etc．

English

3 Connections

HDMI IN

COAXIAL

DIGITAL AUDIO

INPUT

Make the following connection to use this

product.

Connecting to a TV

Connect the product to TV to view the playback from the disc.

Connect to the HDMI Jack

Optional Connection

Option 1: Connect to the digital amplier⁄

receiver

Option 2: Connect to network

Option 1: Connect to the digital

amplier/receiver

Route the sound from this player to other device to enhance audio output.

1. Connect a HDMI cable from the HDMI output jack on this product to the HDMI

input jack on the TV.

Note:

– You can opmize the video output by pressing the HDMI buon repeatedly to select the best resoluon which the TV can support.

1. Connect a coaxial cable from the

COAXIAL jack on this product to the COAXIAL jack on the device.

Option 2: Connect to network

Connect this product to the network to

enjoy BD-Live™ bonus content and

software upgrade by network.

1. Connect the network cable from the LAN jack on the product to the LAN jack on the

network system.

English

Connect USB device

A USB device provides an additional memory

to software upgrade and enjoy BD-Live

bonus content.

You can also enjoy playing back MP3/ JPEG/ MPEG4 les stored in the USB ash device.

1. Connect the USB Flash device to the USB jack on this product.

Notes:

- Connect only a USB Flash device to the USB jack on this product.

- To enjoy BD-Live™ bonus content, as your local storage, use a 1 GB or larger USB

memory.

-For some Blu-ray

discs with BD-Live

feature, you may need to plug in the USB device before loading the disc. Otherwise, the disc may not playback.

- TOSHIBA does not guarantee 100%

compability with all USB Flash devices.

Connect Power

1. Connect the AC power cable to:

- the wall socket.

• The product is ready to be set up for use.

Notes:

– Before connecng the AC power cord, ensure you have completed all other connecons. – Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back of the unit. – The type plate is located on the back of the unit.

English

4 Preparation

7 m 10 m7 m

Always follow the instructions in this chapter

in sequence.

Note:

- Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiaon exposure or other unsafe operaon.

Setting up the player

Find the correct viewing input

1. Press 1 to turn on this product.

2. Turn on the TV and switch to the correct

video-in input (refer to the TV user manual on how to select the correct input).

Prepare the remote control

1. Open the battery compartment.

2. Insert one R03 battery with correct

polarity (+/-) as indicated.

3. Close the battery compartment.

Notes:

- If you are not going to use the remote control for a long me, remove the baery.

- Risk of explosion! Keep baery away from heat, sunshine or re. Never discard baery in re.

• The maximum operable ranges from

the unit are as follows.

- Line of sight: approx. 10 m

- Either side of the centre: approx. 7 m within 30°

- Above: approx. 7 m within 30°

- Below: approx. 7 m within 30°

Initial Setting

When you turn on this unit for the rst time,

you need to follow these steps.

1. A welcome page will be displayed when this product is powered on.

2. Press OK to enter language setting.

3. Select your desired language, resolution and aspect ratio using /, then press OK.

4. Press SETUP to exit the Setup menu.

Use the SETUP menu

1. Press SETUP to display the Setup menu when the Blu-ray DiscTM Player is playing or no disc. And press SETUP to exit the Setup menu.

Tip:

- When playing high-denion sources, you must press

STOP 

buon to enter

Select menu display language

1. Press SETUP, [General Setting] menu is displayed.

2. Select [Language], then press .

3. Select [OSD], then press .

- The language options may vary for different regions.

4. Press / to select a language, then press OK.

Note:

- If this disc player is connected to a HDMI CEC compliant TV, skip this setting. It switches automatically to the same OSD menu language as per your TV setting.

SETUP

interface.

English

5 Playback

Playback Functions

Basic Playback

1. Press remote control, your Blu-ray Disc™ player will turn on. The unit will take around 20 seconds to warm up.

2. Turn on the TV, and then select the input

setting on the TV that matches the connection method you used to connect your player.

3. Press OPEN/CLOSE Z to slide out the disc tray.

4. Place a disc on the disc tray with the label facing up, and then press OPEN/CLOSE Z to slide back and close the disc tray. The disc loading time depends on the types

of disc you are loading, and loading a Blu-ray

Disc

5. If the disc does not start playing

automatically, please press BX to start

playback.

6. If a Blu-ray DiscTM or DVD menu displays,

use cursor buttons to select PLAY. Then, press OK to conrm.

7. To eject the disc, press OPEN/CLOSE Z.

Pause playback

1. Press BX to pause playback. The sound will be muted.

2. Press

Stop playback

1. Press STOP  button once to go to resume

mode, the TV screen will show the resume logo.

2. Press STOP  twice to stop the playback completely.

3. Press where playback is stopped or from the beginning of the disc after the playback is completely stopped.

Not all Blu-rayTM discs support the resume

feature.

Fast Forward and Fast Reverse

1. Press F.F M to fast forward through the disc. The fast forward speed changes based on how many times you pressed the button. The speed will increase through the following

button on the front panel or the

will take longer time.

to resume the playback.

to resume playback from the point

sequence: 2X, 4X, 8X, 16X, 32X

2. Press BX to resume playback.

3. Press F.R m to fast reverse through the disc. The fast reverse speed changes based on how many times you pressed the button. The speed will increase through the

following sequence: 2X, 4X, 8X, 16X, 32X

4. Press BX to resume playback.

Instant Search and Instant Replay

1. During playback, press and hold M button,

you can search 30 seconds forward.

2. During playback, press and hold m button, you can instant replay the content

from 10 seconds before.

Previous and Next

During playback, press PREV . button,

and you can skip back to the previous chapter or track. Each press of this button will allow you to skip a chapter or track till the beginning of the disc. Press of NEXT > button during playback will allow you to skip the playback to next chapter or track.

Slow Forward

1. Press =B during normal playback. The slow forward speed is 1/16 in default.

2. To change slow forward speed, press =B repeatedly, and the slow forward speed will be changed in the following sequence: 1/16, 1/8, 1/4, 1/2, normal.

3. To exit slow forward mode and return to

normal playback, press BX.

Step Forward

Use this feature to help you to enjoy the video frame by frame.

1. Press playback will change to pause state.

2. Press =B repeatedly to advance the picture frame by frame.

3. Press BX to resume normal playback.

HDMI

When there is le or disc being played, it is

not allowed to switch resolution through

the HDMI button of the Remote Control.

during normal playback, then

English

Advanced Playback

DISPLAY

Press this button and the screen will display

some information about disc, such as: Title number, Chapter number, Track number, Elapsed Time, Mode, Audio, Angle, and

Subtitle languages. Press this button again to turn off the information display.

RE PEAT

Press REPEAT repeatedly to select different repeat modes.

DVD:Repeat Chapter, Repeat Title and All. VCD PBC Off/CD/JPEG/MP3:Repeat Track and

All.

A-B

To play certain section within the video or

song, press A-B button to set the start point. Then, press A-B button again to set the end

point and complete the setting. The selected section will be played repeatedly. Press A-B button the third time to cancel this function. The end point cannot be set until 5 seconds of playback has elapsed from the start point.

During playback, press SEARCH button to edit Title, Chapter, and Time. Press / and OK button on the remote control to select Title, Chapter, or Time. Then

press the numeric buttons or  / and then press OK. The playback will skip to the desired location. For Time Search, press / to select Title or Chapter time search.

SUBTITLE

Press this button repeatedly and the screen

will display “X/XX XXX” or “Off”. The “X”

indicates the current number of this

language; “XX” indicates the total number of language; “XXX” indicates the language.

The number of available languages depends on the disc.

RETURN

Press this button to return to the previous on-screen menu in setup menu such as

External Memory Information, Parental Control, Country Code, etc. During MP3/JPEG/VIDEO playback, press RETURN once, it will return back to Media

Center page. During VCD disc playback and PBC On is

selected, press the button to return to PBC Menu.

ANGLE

During playback, press this button to change

the angle of the picture. The screen will

display “Angle X/X.” The rst “X” indicates the current number of angle, and the second “X”

indicates total number of angle.

Not all Blu-rayTM or DVD has the multi-angle

feature. The screen will take around 5 seconds to change.

TOP MENU

You may press this button at any time, and

the Blu-ray Disc

or DVD video disc

playback will pop up the disc menu.

POP MENU/MENU

During Blu-ray Disc

MENU/MENU to display the disc title, and the

playback, press POP

playback will not be stopped even the menu is on the screen.

1. Press the  /// buttons to select an

option, then press OK to conrm.

2. Press POP MENU/MENU to close the

menu.

During DVD playback, press POP MENU/ MENU to open the disc menu. During VCD playback, press POP MENU/MENU

to switch PBC On/Off.

During displaying USB and Data Disc le content in media center, press POP MENU/ MENU to add the Photo/Music/Video les to

the playlist.

1.Press /// buttons to select an

option under the Photo/Music/Video les.

2. In the le browser, press  to select the le(s) to be added to the playlist. "√ " will appear beside the selected les.

3. Press POP MENU/MENU button, a pop up menu will appear, then press  / and OK

button to select "Add to Playlist" to add the

les to the Playlist. "Select all" and "Clear all"

options are also available. Select "Cancel" to exit the pop up menu.

All the selected les will be added to the "Playlist" folder. You can play or delete the les in the playlist. Press POP MENU/MENU to delete the selected les in"Playlist"

SETUP

Press the SETUP button, and the screen will display some information about the player,

such as:

General Setting• Display Setting• Audio Setting• System Information•

PROGRAM

During CD/DVD/VCD playback, you can press this button to edit the sequence of the

playlist.

BOOKMARK

During VCD/DVD disc playback, press the BOOKMARK button to add the bookmark;

press and hold for a few seconds to display the list of bookmark which you added before

on the screen, then you can press the OK button to select the bookmark or CLEAR

button to delete the bookmark.

AUDIO

Press AUDIO button on the remote control to select the audio streams that set within the Blu-rayTM or DVD disc. The screen will display:

AUDIO: X / XX XXX XXXX “X” - The Current Audio Stream Number “XX” - The total number of Audio Stream

English

“XXX” - Audio Language

Primary video

Secondary video

with Secondary Audio

“XXXX” - Audio Technology

Press this button to play media les in the USB.

ZOOM

Press ZOOM button repeatedly to Zoom in/out

playback in the video.

Zoom mode : Zoom 2x -> Zoom 3x -> Zoom 4x -> Zoom 1/2 -> Zoom 1/3 -> Zoom 1/4.

DIGEST

During playback of JPEG disc, press DIGEST to view a page of 12 thumbnail images.

- Use /// to select an image.

Press OK to view the selected image in fullscreen and subsequent images will be

displayed one after another automatically.

- Press PREV

/NEXT to view the

previous or next thumbnail screen.

PIP AUDIO

Press PIP AUDIO button to open the

secondary audio of secondary video(PIP’s sub-window video).

OSC

Press OSC to open On Screen Control menu

during playback. In this menu, you can make

some playback-related control. The on screen control contains following items: [Title]: The title in current playback/titles in total. Select your desired title to playback. [Chapter]: The chapter in current playback/ chapters in total. Select your desired chapter to playback. [Time]: View the elapsed/remaining playback time of title/chapter. Use / to view: the

elapsed playback time of title, the remaining playback time of title, the elapsed playback time of chapter, and the remaining playback

time of chapter.

[Mode]: Select playback mode among shufe, random, and normal.

[Audio]: The Blu-ray DiscTM/DVD disc’s soundtrack language. Use / to view the audio available in the disc and select your desired Audio type. [Angle]: The angle view of current playback/ the angles in total. Please reference Playback > Angle to see more detailed info. Use / to select your desired angle view. [Subtitle]: The Subtitle in current playback. Use / to view the subtitles available in the disc and select your desired subtitle type or turn it off.

[Subtitle Style]: When you play the Blu-ray

DiscTM or DVD disc and if it has external

subtitle, you will see it in OSC menu.

[Bitrate]: Use /  to select your desired Bitrate. [Still Off]: Close the Still feature of DVD disc.

For some DVD discs, a certain video picture

will be frozen as a still picture during the process of playback to let the user has a better view of certain picture. To continue

playback, select Still Off.

[Instant Search]: Instant search 30 seconds forward. [Instant Replay]: Replay the content from 10 seconds before.

Tip:

- The specied operaon for each item will vary with

disc types. And some items are available only when the disc is supportable.

Blu-ray DiscTM BONUSVIEW

Playing Secondary Video (Picture-in-Picture) and

Secondary Audio is for Blu-ray Disc Secondary video can be played from a disc

compatible with the Picture-in-Picture (PIP) function. For the playback method, refer to the instructions

for the disc.

1. Turn on secondary video by pressing the PIP button.

2. Press the PIP AUDIO button to select the

secondary audio, and select an option except Off. The secondary audio is opened, you can hear the

disc secondary video sound.

In order to hear the secondary audio, the PIP

feature on the disc must be turned on.

3. Press the PIP button again to turn off the secondary video.

This function is not available when the primary

video is played in Search, Slow-Motion, or Frame-

by-Frame or Fast Forward/ Reverse mode.

To listen to the secondary audio, the digital audio output must be set to "Bitstream", "Re-encode" or "PCM". Otherwise, only the primary audio can be

heard.

only.

Notes:

- Not all the Blu-ray™ discs can support this funcon.

- High Denion PIP (Second Video) is not supported.

English

6 Customizing

System

Screen SaverOn

More...

Language

Disc Auto Playback

Playback

CEC

Security

Load Default

Network

Upgrade

General Setting

SETUP

Exit

Move cursor key to select menu option then use “OK” key to select

Load Default

Do you want to load default?

Cancel

Load Default

30%

Loading default, please wait...

OK Next

Welcome

to the Toshiba Blu-ray Disc Player Setting Wizard.

Some simple settings are suggested before you begin. You can also access detailed settings from the Setup Menu.

English

Choose

an OSD language before starting.

The language selected will be applied not only here but also in other OSD windows, menus etc.

This section describes the various setting option of this Blu-ray Disc

If the setup option is greyed out, it means

the setting cannot be changed at the current state.

General Setting

1. Press SETUP button on the remote

control.The Setup Menu appears.

2. Press  to select an option, then press

 to access.

3. Press / to select a setup option and

press .

4. Select the setting you wish to change

and press OK to conrm.

- Press  to return to the previous menu.

[System]

To change the following system option to personalize your Blu-ray Disc

• [Screen Saver]

Turn On or Off the screen saver mode. It helps to protect the TV screen. { On } – Set the screen saver active after approximately 5 minutes with no

operation. You can turn off the screen

saver by pressing the SETUP button.

- The Blu-ray DiscTM Player will switch to standby mode if there is no operation after the screen saver is engaged for approximately 10 minutes. { Off } – Turn off the screen saver mode.

• [Disc Auto Playback]

Turn On or Off the disc automatic playback switching mode. {On} – The disc playback automatically after loading. {Off} – Turn off disc auto playback mode.

• [CEC]

This player supports REGZA-LINK which uses the HDMI CEC (Consumer

player.

Electronics Control) protocol. You can

use one single remote control to control

all REGZA-LINK-compliant devices that are connected through HDMI

connectors. {On} - Turns on REGZA-LINK features.

-With CEC on, during TV standby with

the Blu-ray

DiscTM Player on, pressing

SETUP, PLAY/PAUSE will power on the TV. When you turn the TV off, this unit

will automatically turn off. {Off} - Disables REGZA-LINK features.

• [Load Default]

Reset all settings of Blu-ray DiscTM Player to initial default state.

- Follow the instruction on the TV screen

to conrm the default setting operation.

1. Select Load Default.

2. A dialogue box pops up shown as

below. Select OK.

3. It may take awhile when loading default is in progress. Please wait...

4. TV will display as follow:

5. Press OK, enter language setting.

Press/ to select a language option.

English

6. Press OK, enter Resolution setting.

Auto

480i/576i

480p/576p

720p

1080i

1080p

Choose

a resolution that fits your TV.

Change will be applied immediately, you have 15s to determine whether to save the setting or rollback to prior resolution. Better performance will be provided by an HDMI connection!

Resolution

has been changed!

14s

Does everything looks all right with this resolution? Press Yes if you want to apply it. Press No to rollback to previous one.

Yes

16:9 Full

16:9 Normal

4:3 Pan&Scan

4:3 Letterbox

Choose

an aspect ratio that fits your TV.

The change will be applied in the next page. Determine whether to save the setting or rollback to the previous aspect ratio.

FinishPrevious

Setting

wizard is complete!

Now press the OK button to finish and return to the Setup Menu.

Upgrade

New software found! Upgrade?

Cancel

Start

Upgrade

Connecting to the server. Please wait!

Upgrade

New software found! Upgrade?

Cancel

Start

Press / to select an option. Press OK. Select "Yes" or "No" using /.

7. Press OK, enter Aspect ratio setting.

Press / to select an option. Press OK.

informaon to upgrade system, you have to start upgrade from this opon of SETUP Menu.

- If the upgrade le package did not pass the vericaon, error prompt is displayed, check the package again (such as the package is not complete).

- Make sure the rmware version is not an old version.

- When you upgrade the system using USB Flash device, you should make a new folder named UPG_ALL, and copy the upgrade le into this folder.

SW upgrade by Network introduction

There are two modes to upgrade via

internet: Automatic Mode and Interactive Mode. Automatic Mode:

The player will check the internet whether it is connected automatically when powered on.

If connected, player will try to connect the

Toshiba server to check if there is new

rmware for the player. If yes, the player will pop up a message on

the screen to inform you that an upgrading

rmware is available on the internet. You can

choose whether to upgrade or not.

8. Press OK to return to [General Setting] Menu.

• [Upgrade]

For software upgrades to enhance

performance, you could select the

following upgrade method and start to upgrade. {Disc}/{USB Storage}/{Network}

SW upgrade by Disc/USB Storage

Upgrade the software from the disc or USB Flash device.

1. Insert the disc or connect the USB Flash

device which contains the upgrade le

package.

2. Follow the instruction on the TV

screen to conrm upgrade operation.

- The system will reboot after 5 seconds or OK

key is pressed.

Notes:

- If set [Disc Auto Playback] to [O], aer you insert the disc that contains the upgraded

Interactive Mode: You can also do network upgrade via setup

menu.

You should make sure that the player is connected to the internet rst. Press "SETUP" button of the remote control, then choose "System -> Upgrade -> Network" and press "OK" button. Then the

player will connect the Toshiba server to

check if there is new rmware for the player.

If yes, the player will pop up a message on

the screen and you can choose whether to upgrade or not.

+ 33 hidden pages