Blu-ray Disc™/DVD Player
User’s Guide:
BDX2300KU/BDX3300KU/BDK23KU/
BDK33KU
If you need assistance:
❖Toshiba’s Support Web site
support.toshiba.com
❖Toshiba Customer Support Center
Calling within the United States 888-592-0944
Calling from outside the United States 949-583-3305
For more information see “Troubleshooting & Maintenance” on page 43 in this guide.
Owner's Record
The model number and serial number are on the back and underside of your player.
Record these numbers in the spaces below. Refer to these numbers whenever you
communicate with your Toshiba dealer about this equipment.
The lightning flash with an arrowhead symbol, within the equilateral
triangle, is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within the equilateral triangle is intended to
alert the user to the presence of important operating and
maintenance (servicing) instructions in this User’s Guide.
WARNING:
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS
HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT
OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL
ONLY.
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO
WIDE SLOT OF AC POWER UTLET, THEN FULLY INSERT.
CAUTION
: This Blu-ray Disc™/DVD player employs a Laser
System.
To ensure proper use of this product, please read this User ’s Guide
carefully and retain for future reference. Should the unit require
maintenance, contact an authorized service location. Use of
controls or adjustments or performance of procedures other than
those specified herein may result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open the
enclosure. Visible and invisible laser radiation when open and
interlocks defeated. DO NOT STARE INTO BEAM.
CLASS 1
LASER PRODUCT
3
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
Warnings
:
• The mains plug is used as disconnect device and it should
remain readily operable during intended used. In order to
disconnect the apparatus from the mains completely, the main
plug should be disconnected from the mains socket outlet
completely.
• The apparatus shall not be exposed to dripping or splashing
and that no objects filled with liquid, such as vases, shall be
placed on the apparatus.
• Minimum 10 cm (4 inches) distances around the apparatus for
sufficient ventilations.
• The ventilation should not be impeded by covering the
ventilation openings with items such as newspaper, tablecloths,
curtains, etc.
• No naked flame sources such as lighted candles should be
placed on the apparatus.
• The use of apparatus in moderate climates.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades
and a third grounding prong. The wide blade or the third prong
is provided for your safety. If the provided plug does not fit into
your outlet, consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning
storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as the power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
4
The rating plate and
the safety caution
are on the rear of
the unit.
ADDITIONAL SAFETY INSTRUCTIONS
15. Do not overload wall outlets; extension cords, or integral
convenience receptacles as this can result in a risk of fire or
electric shock.
16. Never expose the apparatus to dripping or splashing or place
items such as vases, aquariums, any other item filled with
liquid, or candles on top of the unit.
17. Keep your fingers well clear of the disc tray as it is closing.
Neglecting to do so may cause serious personal injury.
18. Do not place anything on top of this unit.
19. Do not place the apparatus on amplifiers or equipment that
may produce heat.
20. Never block or cover the slots or openings in the unit. Never
place the unit:
• on a bed, sofa, rug or similar surface;
• too close to drapes, curtains, or walls; or
Location of the required label
• in a confined space such as a bookcase, built-in cabinet, or
any other place with poor ventilation.
The slots and openings are provided to protect the unit from
overheating and to help maintain reliable operation.
21. Do not use a cracked, deformed, or repaired disc. These discs
are easily broken and may cause serious personal injury and
apparatus malfunction.
22. If the apparatus should emit smoke or an unusual odor,
immediately disconnect the power cord from the wall outlet.
Wait until the smoke or smell stops, then ask your dealer for a
check and repair. Neglecting to do so may cause fire.
23. During thunderstorms, do not touch the connecting cables or
the apparatus.
24. Warning: To prevent spread of fire, keep candles or other
open flames away from this product at all times.
Products that earn the ENERGY STAR
prevent green house gas emissions by
meeting strict energy efficiency guidelines set
by the U.S. Environmental Protection Agency
and the U.S. Department of Energy. ENERGY
STAR and the ENERGY STAR mark are
registered U.S. marks.
USA
Federal Communications Commission Statement
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause
undesired operation.
Interference
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
Wireless Radio
For product available in the USA/Canada market, only channel 111 can be operated. Selection of other channels is not possible.
The device could automatically discontinue transmission in case of
absence of information to transmit, or operational failure. Note that
this is not intended to prohibit transmission of control or signaling
information or the use of repetitive codes where required by the
technology. If this device is going to be operated in 5.15-5.25GHz
frequency range, then it is restricted to an indoor environment only.
Important
: Any changes or modifications not expressly
approved by the party responsible for compliance could void the
user's authority to operate this equipment. This device and its
antenna(s) must not be co-located or operating in conjunction with
any other antenna or transmitter.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This equipment should be
installed and operated with minimum distance 20cm between the
radiator & your body.
Canada
Industry Canada Statement
This device complies with RSS-210.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation of the device.
This device and its antenna(s) must not be co-located or operating
in conjunction with any other antenna or transmitter.
5
Wireless Radio
For product available in the USA/Canada market, only channel 111 can be operated. Selection of other channels is not possible.
The device could automatically discontinue transmission in case of
absence of information to transmit, or operational failure. Note that
this is not intended to prohibit transmission of control or signaling
information or the use of repetitive codes where required by the
technology.
PRECAUTIONS
Notes on handling
• When shipping the Blu-ray Disc™/DVD player, the original
shipping carton and packing materials come in handy. For
maximum protection, repack the unit as it was originally packed
at the factory. Take care not to give it a shock or shake when
carrying.
• Do not use volatile liquids, such as insect spray, near the
Blu-ray Disc™/DVD player. Do not leave rubber or plastic
products in contact with the Blu-ray Disc™/DVD player for a
long time. They will leave marks on the finish.
• The top and rear panels of the Blu-ray Disc™/DVD player may
become warm after a long period of use. This is not a
malfunction.
• When the Blu-ray Disc™/DVD player is not in use, be sure to
remove the disc and turn off the power.
• If you do not use the Blu-ray Disc™/DVD player for a long
period, the unit may not function properly in the future. Turn on
and use the Blu-ray Disc™/DVD player occasionally.
Notes on locating
Place the Blu-ray Disc™/DVD player on a level surface. Do not
use it on a shaky or unstable surface such as a wobbling table or
inclined stand. The loaded disc may come off the proper position
and cause damage to the Blu-ray Disc™/DVD player.
When you place this Blu-ray Disc™/DVD player near a TV, radio,
or VCR, the playback picture may become poor and the sound
may be distorted. In this case, place the Blu-ray Disc™/DVD
player away from the TV, radio, or VCR.
Do not use this player in places which are extremely hot, cold,
dusty or humid.
Do not restrict the air flow of this player by placing it somewhere
with poor air flow, by covering it with a cloth, or by placing it on
bedding or carpeting.
Be sure to remove the disc and unplug the AC power cord from the
outlet before carrying the player.
Notes on cleaning
Use a soft, dry cloth for cleaning.
• For stubborn dirt, soak the cloth in a weak detergent solution,
wring well and wipe. Use a dry cloth to wipe it dry.
Do not use any type of solvent, such as thinners and benzene,
as they may damage the surface of the Blu-ray Disc™/DVD
player.
• If you use a chemical saturated cloth to clean the unit, follow
that product's instructions.
Important:
Any changes or modifications not expressly approved
by the party responsible for compliance could void the user's
authority to operate this equipment.
IMPORTANT NOTE:
IC Radiation Exposure Statement: This equipment complies with
IC RSS-102 radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.
Inspection and Maintenance
This Blu-ray Disc™/DVD player is a high technology, precision
device. If the optical pick-up lens and disc drive parts become dirty
or worn down, the picture quality may be reduced. To avoid
reduction in picture quality, it is recommended that regular
inspection and maintenance (cleaning or parts replacement) be
performed every 1,000 hours of use. For further details, contact
your nearest consumer electronics dealer.
Notes on moisture condensation
Moisture condensation damages the Blu-ray
Disc™/DVD player. Please read the following
carefully.
Moisture condensation occurs, for example, when you pour a cold
drink into a glass on a warm day. Drops of water form on the
outside of the glass. In the same way, moisture may condense on
the optical pick-up lens inside this unit, one of the most crucial
internal parts of the Blu-ray Disc™/DVD player.
Moisture condensation occurs during the
following cases.
When you bring the Blu-ray Disc™/DVD player directly from a cold
place to a warm place.
When you use the Blu-ray Disc™/DVD player in a room where you
just turned on the heater, or a place where the cold wind from the
air conditioner directly hits the unit.
In summer, when you use the Blu-ray Disc™/DVD player in a hot
and humid place just after you move the unit from an air
conditioned room.
When you use the Blu-ray Disc™/DVD player in a humid place.
Do not use the Blu-ray Disc™/DVD player when
moisture condensation may occur.
If you use the Blu-ray Disc™/DVD player in such a situation, it may
damage discs and internal parts. Remove the disc, connect the
power cord of the Blu-ray Disc™/DVD player to the wall outlet, turn
on the Blu-ray Disc™/DVD player, and leave it for two or three
hours. After two or three hours, the Blu-ray Disc™/DVD player will
have warmed up and evaporated any moisture. Keep the Blu-ray
Disc™/DVD player connected to the wall outlet and moisture
condensation will seldom occur.
On Safety
Do not handle the AC power cord with wet hands and do not put
your fingers or objects into the player.
When connecting or disconnecting the AC power cord, grip the
plug and not the cord itself. Pulling the cord may damage it and
create a hazard.
6
Playback side
When you are not going to use the unit for a long period of time,
disconnect the AC power cord.
On Recycling
This unit’s packaging materials are recyclable and can be reused.
Please dispose of any materials in accordance with your local
recycling regulations.
Batteries should never be thrown away or incinerated but disposed
of in accordance with your local regulations concerning chemical
wastes.
NOTES ON DISCS
On handling discs
Do not touch the playback side of the disc.
Do not attach paper or tape to discs.
On cleaning discs
Fingerprints and dust on the disc cause picture and sound
deterioration. Wipe the disc from the center outwards with a soft
cloth. Always keep the disc clean.
If you cannot wipe off the dust with a soft cloth, wipe the disc lightly
with a slightly moistened soft cloth and finish with a dry cloth.
Do not use any type of solvent such as thinner, benzine,
commercially available cleaners or antistatic spray for vinyl LPs. It
may damage the disc.
On storing discs
Do not store discs in a place subject to direct sunlight or near heat
sources.
Do not store discs in places subject to moisture and dust such as a
bathroom or near a humidifier.
Store discs vertically in a case. Stacking or placing objects on discs
outside of their case may cause warping.
COPYRIGHT
This guide is copyrighted by Toshiba America Information
Systems, Inc. with all rights reserved. Under the copyright laws,
this guide cannot be reproduced in any form without the prior
written permission of Toshiba. No patent liability is assumed,
Trademarks
AVCHD and the AVCHD logo are trademarks of Panasonic
Corporation and Sony Corporation.
Blu-ray Disc™, Blu-ray™, BD-Live™ and BONUSVIEW™ and the
logos are trademarks of the Blu-ray Disc Association.
CinemaNow is a registered trademark of Best Buy, Inc.
®
, the DLNA Certification Logo and DLNA CERTIFIED™ are
DLNA
trademarks, service marks, or certification marks of the Digital
Living Network Alliance.
however, with respect to the use of the information contained
herein.
DVD is a trademark of DVD Format/Logo Licensing Corporation.
HDMI, the HDMI logo, and High-Definition
Multimedia Interface are trademarks or
in the United States and other countries.
Hulu Plus is a trademark of Hulu, LLC.
Microsoft, Outlook, Windows, and Windows Media are either
registered trademarks or trademarks of Microsoft Corporation in
the United States and/or other countries.
Netflix is a registered trademark of Netflix, Inc.
registered trademarks of HDMI Licensing LLC
Windows Media and the Windows logo are
trademarks or registered trademarks of
Microsoft Corporation in the United States
and/or other countries.
Oracle and Java are registered trademarks of
Oracle and/or its affiliates. Other names may
be trademarks of their respective owners.
Pandora is a registered trademark of Pandora
Media, Inc.
Picasa is a trademark of Google Inc.
VUDU is a registered trademark of VUDU, Inc.
The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi
Alliance. The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi
Alliance.
"x.v.Color" and "x.v.Color" logo are registered trademarks of Sony
Corporation.
YouTube is a registered trademark of Google Inc.
All other brand and product names are trademarks or registered
trademarks of their respective companies.
8
Introduction
Introduction
Safety icons
This guide contains safety instructions that must be observed to avoid potential hazards that
could result in personal injuries, damage to your equipment, or loss of data. These safety cautions
have been classified according to the seriousness of the risk, and icons highlight these
instructions as follows:
Indicates an imminently hazardous situation which, if not avoided, will result in death or
serious injury.
Indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury.
Indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury.
Indicates a potentially hazardous situation which, if not avoided, may result in property
damage.
Provides important information.
Package contents
❖ Remote Control (SE-R0418) with Batteries (1 set of 2 AAA)
❖ User's Guide (this manual)
❖ Quick Start Guide
Symbols used in this manual
The following symbols indicate the corresponding operation.
Symbol: Operation:
BD-video and BD-RE/BD-R recorded in BDMV format
DVD-video
Audio CD/DTS
DVD-RW/-R with AVCHD™ files
BD-RE/-R, DVD-RW/-R and CD-RW/-R with MP3 files
BD-RE/-R, DVD-RW/-R and CD-RW/-R with WMA files
BD-RE/-R, DVD-RW/-R and CD-RW/-R with JPEG files
®
-CD
Features
If any of the symbols listed above are not displayed under the function heading, the operation
is applicable to all media.
Features
Blu-ray Disc™: Enjoy Blu-ray Disc™ viewing and storage, capable of storing five times more
data than a conventional DVD.
BD-Java™: Enjoy the interactive functions such as games or interactive menus, supported
Java™ applications.
BD-Live™: BD-ROM version 2 Profile 2.0 allows interactive functionality when this player is
connected to the Internet, in addition to the BONUSVIEW
differ depending on the disc type.
Full high-definition video playback: Watch movies in the highest picture quality available for
your HDTV. This player offers full high-definition video playback up to 1080p resolution for an
amazing viewing experience. A highly detailed picture and increased sharpness delivers a more
true-to-life picture.
DVD Upconversion for enhanced picture quality: Your current DVD will look even better than
before thanks to video upconversion. Upconversion will increase the resolution of standard
definition DVD to near high definition up to 1080p over an HDMI
be less jagged and more realistic for a near high-definition experience.
Enjoy your content on different kinds of media: Full backwards compatibility with Blu-ray
Disc™, DVD and CD ensures that you can continue to enjoy your current audio-video collection.
Additionally, you can view JPEG digital pictures or listen to MP3 or Windows Media™ Audio
music files.
PIP: Some BD-videos have the PIP function which enables you to display the secondary video in
the primary video. You can call up the secondary video by pressing PIP on the remote whenever
the scene contains the secondary video.
Pop-up menu: Some BD-video have pop-up menu which is a navigation menu that can be called
up and be operated on the TV screen without interrupting the playback. You can call up the popup menu by pressing POP UP/MENU or TOP MENU on the remote. Contents in the pop-up
menu vary depending on the disc.
Playing back AVCHD™ files: This player supports playback of AVCHD™ format files (new
format for high definition video camcorders) recorded on disc. Your high definition personal
archive is playable in HD quality.
x.v.Color
technology. To watch this video content with the “x.v.Color®”, a TV or other display device
supporting both video image reproduction using the “x.v.Color®” standard and capable of
manually switching its color setting is required. Please refer to the User’s Guide of your display
device for further information.
Wi-Fi CERTIFIED
is an assurance that Wi-Fi® Alliance has tested a product in numerous configurations and with a
diverse sampling of other devices to ensure compatibility with other Wi-Fi CERTIFIED
equipment that operates in the same frequency band.
Easy and simple connection to your HDTV via HDMI
with one single HDMI® (High-Definition Multimedia Interface) cable. It is recommended to use
a High Speed HDMI
be transferred to your HDTV without conversion to analog signals, so you will get excellent
picture and sound quality.
HDMI
allows integrated system control over HDMI
may not work properly on some devices.
®
: This player supports playback of video contents on discs recorded with “x.v.Color®”
®
(for model BDX3300KU/BDK33KU only): The Wi-Fi CERTIFIED® logo
®
Cable for better compatibility. The high definition video output signal will
®
-CEC (Consumer Electronics Control): This player supports HDMI®-CEC, which
®
and is part of the HDMI® standard. This function
™ function. The various functions
®
connection. The picture will
®
®
: Connect this player to your HDTV
9
10
2134567
8
1
234
HDMI® 1080p/24F output (Blu-ray Disc™ only): This player is equipped with a feature which
can provide the smooth movement in the playback of film originated material with the frame rate
of 24 frames per second with progressive scan. (Available only when the TV is connected by an
®
HDMI
Copyright protection system: To play back the digital video images of a Blu-ray Disc™ / DVD
via an HDMI
support a copyright protection system called HDCP (high bandwidth digital content protection
system). HDCP is copy protection technology that comprises data encryption and authentication
of the connected AV device. This player supports HDCP. Please read the operating instructions of
your TV (or AV amplifier) for more information.
Blu-ray Disc™/DVD player controls
cable and compatible with 1080p/24F frame input.)
®
connection, it is necessary that both the player and the TV (or an AV amplifier)
Out portConnects to a TV with an HDMI® compatible port via an HDMI®
To completely turn off the player, unplug the AC power cord.
decoder, or other device using a coaxial digital audio cable.
cable.
HDMI® connection is required for this player to operate properly.
®
(HDMI
cables available only with certain models).
NOTE: Analog connection is not supported.
®
Digital/DTS®
Remote control buttons
11
(Sample Illustration) Remote control buttons
12
Item: Description:Operation:
1 OPEN/CLOSEPress to open or close the disc tray.
2GOTO
3 REVDuring playback, press to fast reverse the playback.
4 SKIPDuring playback, press once to return to the beginning of the current
5 PAUSEPress to pause playback.
6RETURNPress to return to the previous menu.
7PROGRAMPress to create program list for DVD/CD disc.
8DIGESTPress to display the thumbnail view for JPEG.
9SUB (Subtitle)Press to select the subtitle language.
10AUDIOPress to select the audio language.
11A-BPress to play back a defined section between point A and B repeatedly.
12REPEATPress to toggle between various repeat modes.
13 POWERPress to turn on the unit, or to turn the unit into the standby mode. (To
14Number buttonsIn playback mode, press GOTO, then input the numbers using the 0-9
15CLEARPress to clear an input error.
16OSCPress to display the OSC (On Screen Control) menu.
17 FWDDuring playback, press to fast forward the playback.
18 PLAYPress to start playback or resume playback.
19 SKIPDuring playback, press to skip to the next title, chapter, track or file.
Remote control buttons
Press to display the search menu.
title, chapter, track or file.
During playback, press twice to return to the previous title, chapter,
track or file.
During the JPEG playback, press to return to the previous file.
STEPPress to advance one frame.
SLOWPress to play back in the disc slow motion.
HOMEPress to display HOME menu.
completely turn off the unit, you must unplug the power cord.)
number buttons to enter a title, chapter, track, time or file number.
In menu mode, use the number buttons to enter the parental code
password.
TOP MENUPress to display a top menu.
PIPPress to switch picture-in-picture feature on or off (only applicable to
POP UP/MENUDuring Blu-ray Disc™ playback, press to open a menu that lets you
BD-video which supports the PIP function).
control Blu-ray Disc™ playback.
During DVD playback, press to open the DVD menu (if available).
During the JPEG playback, press to go to the next file.
Remote control buttons
/ / /
Item: Description:Operation:
20 STOPPress to stop playback.
21Press to select items or settings.
OKPress to confirm or select menu items.
22NETFLIX
23RED/GREEN/
24BOOKMARKPress to set your favorite bookmark for DVDs.
25ZOOMPress to zoom in / out the image for DVD / JPEG discs.
26ANGLEPress to select a viewing angle if multiple angles are available on the
272nd. AUDIOIn PIP mode, press to turn the audio for the secondary video on or off.
28CONNECTEDPress to display the CONNECTION menu.
29DISPLAYPress to display operating status.
®
YELLOW/BLUE
Press to use Netflix service directly. (Make sure your Blu-ray
Disc™/DVD player is correctly connected to the Internet and network
settings are properly configured.)
Press to select items on some Blu-ray Disc™ contents.
When file list / thumbnail list is shown, press to switch between
pages.
disc.
13
Installing the batteries
Install the batteries (AAAx2), matching the polarity indicated inside battery compartment of the
remote control.
1 Open the battery cover.
2 Insert batteries.
Make sure to match the polarity marks (+ / -) on the batteries to the marks indicated in the
battery compartment.
(Sample Illustration) Remote control - Opening the battery cover
14
(Sample Illustration) Remote control - inserting the batteries
3 Replace the battery cover.
Remote control buttons
Always dispose of used batteries in compliance with your local government.
Never throw batteries into a fire.
Do not mix different battery types or combine used batteries with new ones.
If the remote control does not operate correctly, or if the operating range is reduced, replace
both batteries with new ones.
If the batteries are dead or if you will not be using the remote control for a long time, remove
the batteries to prevent battery acid from leaking into the battery compartment.
Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type.
When discarding batteries, environmental problems must be considered and local rules or
laws governing the disposal of these batteries must be strictly followed.
Using the remote control
Point the remote control at the remote sensor and press the buttons:
(Sample Illustration) Remote control angle
Distance: Approximately 5m from the front of the remote sensor.
Angle: About 30° in each direction from the front of the remote sensor.
Do not expose the remote sensor to a strong light source such as direct sunlight or other
illumination. This can damage the sensor resulting in the inability to operate the Blu-ray
Disc™/DVD player via the remote control.
Blu-ray Disc™/DVD player connections
High
Definition
TV
Do not drop or expose the remote control to electric shock.
Do not expose the remote control excessively hot or humid places.
Do not spill water or place anything wet on the remote control.
Do not open the remote control.
If the remote control is not going to be used for a long period of time, remove the battery to
avoid damage caused by battery leakage corrosion.
Direct the remote control at the remote sensor of the Blu-ray Disc™/DVD player.
When using the remote control, press the buttons at intervals of approximately 1 second to
ensure the correct mode of operation.
Blu-ray Disc™/DVD player connections
Connecting to a TV using an HDMI® cable
This connection provides better picture quality and supports up to 1080i/1080p, 1080p/24F
resolution.
Connect an HDMI
the TV.
(Sample Illustration) Connecting to a TV - HDMI
®
cable from the HDMI® output jack on the player to the HDMI® input jack on
®
cable
15
HDMI® connection is required. (HDMI® cable sold separately).
Analog connection is not supported.
Do not tilt the connector when inserting it into the HDMI
the jack and the connector are matched.
When using a non-HDCP compatible TV, the image may not display properly.
®
An HDMI
cable carries both video and audio signals. If you wish to use TV speakers, you do
not need to make an additional audio connection if you are using an HDMI® cable.
®
jack, and make sure the shapes of
Connecting to a digital amplifier/AV receiver
Route the sound from this player to other device to enhance audio output.
❖ Connect a coaxial cable from the Coaxial Digital jack on the player to the Coaxial jack on
the device.
❖ If your AV receiver or amplifier has an HDMI
cable to the HDMI IN jack on your AV receiver or amplifier.
®
jack, you can also connect the HDMI®
16
AV receiver / amplifier
digitalaudio coaxialcable
(not
included)
COAXIAL
DIGITAL AUDIOINPUT
LAN
WANL A N
12345
Internet
LAN cable
LANcable
Hub or broadband router
Networking equipment
(modem, etc.)
Blu-ray Disc™/DVD player connections
(Sample Illustration) Connecting to a digital amplifier/AV receiver
Connecting to a network
Your Blu-ray Disc™/DVD player can be connected to your home network:
❖ By using a wired network. This provides the best performance, because the attached device
and player are connect directly to the network and are not subject to radio frequency
interference.
❖ By connecting through a wireless LAN adaptor and a wireless access point or router (for
BDX2300KU/BDK23KU model).
❖ By connecting through the built-in wireless device and a wireless access point or router (for
BDX3300KU and BDK33KU models).
Connecting via wired router
Connect one end of an Ethernet cable (CAT5 or better with RJ45 connector) to the Ethernet jack
on the front of your player, and the other end to a wired hub or broadband router.
(Sample Illustration) Connecting to a wired router
Do not connect a modular phone cable to the Ethernet jack.
When plugging or unplugging the cable, hold the connector on the end of the cable.
When unplugging, do not pull on the cable. Press down the lock tab, and then pull the
connector out of the jack.
Because there are various connection configurations, follow the instructions from your
telecommunication carrier or Internet service provider.
Blu-ray Disc™/DVD player connections
/
17
Connecting via wireless access point or router - for BDX2300KU and BDK23KU models
Your Blu-ray Disc™/DVD player can also be connected to a network via Wireless access point.
USB Wi-Fi® adapter is not included and is required for a wireless connection.
This unit is compatible with TOSHIBA's USB Wi-Fi
WLM-12NB1.
®
adapter only. Model name:
A wireless AP/IP router is required to create a wireless network connection.
1 Connect the wireless LAN adapter to the USB port on the front panel of the Blu-ray
Disc™/DVD player, and set the wireless network options.
2 After the Wi-Fi
Network from the Settings menu, and press the OK button to enter.
®
device is inserted into the USB port, press the () arrow buttons to select
For detailed information, please refer to the device’s User’s Guide for WLM-12NB1.
(Sample Illustration) Connecting to a wireless router
Connecting your player to a wireless access point or router - for BDX3300KU and BDK33KU
models
Your Blu-ray Disc™/DVD player has an integrated Wi-Fi® device and antenna. No physical
connection to the wireless router is necessary.
1 Configure your player to access the wireless access point or router.
2 The network configuration and connection method may vary depending on the equipment in
use and the network environment. Your Blu-ray Disc™/DVD player is equipped with an
IEEE 802.11n wireless module, which also supports the 802.11 a/b/g/n standards. For the best
wireless performance, we recommend using an IEEE 802.11n certified Wi-Fi
(access point or wireless router).
®
network
Loading...
+ 39 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.