Toshiba A29008 Service Note

Publish Date: 99/05/10

.

.

BSI No.: A29008
Subject:

Changing the ROM (for US/CA)

Model: TF831, TF861

Category Field Application Unit

Modification of Software (ROM) To be applied when necessary ROM

Factory Application: From the production of April, 1999

CONTENT

1. Reason for Modification

1.1 Added the new functions
(1) Separator Page between received documents.
(2) Line Monitor set permanently by the customer.
(3) Forced-print out function in security RX.

.

.
.

.

(4) Changing the destination of Recovery Transmission.

1.2 Improved items requested by TSB
(1) Changing the number of received pages to 3 digits.
(2) Changing the indication of the year to 4 digits on lists and reports.
(3) LCD indication and operation when [JOB STATUS] key is pressed.
(4) Supported V34 for PC transmission.
(5) Enable PC Printing during Secure Receive.
(6) Changed Prompts. Mb -> MB
(7) When Reception Collate Printing function is ON, the machine prints the job in the order

the machine completed receiving the job.
(8) Indicate the error code, STATUS (OK, NG) on Memory Transmission Report.
(9) Indicate department name in TTI which controls department.
(10) Widen scan width a few mm.
(11) Reduction rate from LEGAL to LETTER was changed from 75% to 73% on reception.
(12) When PC printing using MS WORD, the page can be printed in 11, 22, 33 collated way.

2. Details of Modification

Location (IC No. / Unit name): ROM1, ROM2, ROM3 / Main PC board
Change of ROM version (Check Sum):

ROM1 (TF831) "1ACWWTS2o" (9250) ---> "1ACWWTS5a" (4B81)
ROM1 (TF861) "1ABWWTS2o" (924E) ---> "1ABWWTS5a" (4B7F)
ROM2 (Common) "2AAWWTS2o" (53C7) ---> "2AAWWTS5a" (212E)
ROM3 (Common) "3ABUSTS16AA" (8EF0) ---> "3ABUSTS4aAA" (2707)

Note: The above change of ROMs are applied to the machines that the new type CIS unit

installed only.

Attached Files

None