Toshiba 50PH4700, 60PH6700 User Manual

Download

Page 1

OWNER’S MANUAL

PLASMA TV

Please read this manual carefully before operating your set and retain it for future reference.

50PH4700 60PH6700

P/NO : MFL67701712 (1302-REV00)

www.lg.com

Page 2

ENGLISH

WARNING/CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Short-circuit

Breaker

Power Supply

Short-circuit

Breaker

Power Supply

Short-circuit

Breaker

Power Supply

ENG

IMPORTANT SAFETY INSTRUCTIONS

Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product.

Read these instructions.

WARNING/CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle,

is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an

equilateral triangle is intended to alert

the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING/CAUTION

- TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

WARNING

If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.

CAUTION

If you ignore the caution message, you may be slightly injured or the product may be damaged.

Keep these instructions. Heed all warnings. Follow all instructions.

Do not use this apparatus near water.



Clean only with a dry cloth.



Do not block any ventilation openings. Install



in accordance with the manufacturer’s instructions.

Do not install near any heat sources such



as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

Do not defeat the safety purpose of the



polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet (Can differ by country).

NOTE

The note helps you understand and use the product safely. Please read the note carefully before using the product.

WARNING

known to the State of California to cause cancer

: This product contains chemicals

and birth defects or other reproductive harm.

Wash hands after handling.

Do not press strongly upon the panel with a



hand or a sharp object such as a nail, pencil or pen, or make a scratch on it.

Page 3

IMPORTANT SAFETY INSTRUCTIONS

Short-circuit

Breaker

Power Supply

Short-circuit

Breaker

Power Supply

Protect the power cord from being walked on



or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

Only use attachments/accessories specified



by the manufacturer.

Use only with a cart, stand, tripod, bracket,



or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

Unplug this apparatus during lightning storms



or when unused for long periods of time.

Refer all servicing to qualified service



personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Do not stick metal objects or any other



conductive material into the power cord. Do not touch the end of the power cord while it is plugged in. Keep the packing anti-moisture material or



vinyl packing out of the reach of children. Antimoisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.

CAUTION concerning the Power Cord



(Can differ by country): It is recommended that appliances be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner’s manual to be certain. Do not connect too many appliances to the same AC power outlet as this could result in fire or electric shock. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Do not move the TV with the power cord plugged in. Do not use a damaged or loose power cord. Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.

Warning



- To reduce the risk of fire or electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning.

Do not expose to dripping or splashing and do



not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g. on shelves above the unit).

ENGLISH

ENG

Page 4

IMPORTANT SAFETY INSTRUCTIONS

ENGLISH

ENG

Grounding



(Except for devices which are not grounded.) Ensure that you connect the earth ground wire to prevent possible electric shock (i.e. a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet). If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.

Short-circuit

Breaker

As long as this unit is connected to the AC



Power Supply

wall outlet, it is not disconnected from the AC power source even if the unit is turned off. Do not attempt to modify this product in



any way without written authorization from LG Electronics. Unauthorized modification could void the user’s authority to operate this product.

Outdoor Antenna Grounding



(Can differ by country): If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code (NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode.

Antenna grounding according to the National Electrical Code, ANSI/NFPA 70

Cleaning



When cleaning, unplug the power cord and wipe gently with a soft cloth to prevent scratching. Do not spray water or other liquids directly on the TV as electric shock may occur. Do not clean with chemicals such as alcohol, thinners or benzine.

Moving



Make sure the product is turned off, unplugged and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press or put stress on the front panel of the TV.

Ventilation



Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. Do not cover the product with cloth or other materials while plugged. Do not install in excessively dusty places. If you smell smoke or other odors coming



from the TV, unplug the power cord and contact an authorized service center. Keep the product away from direct sunlight.



Never touch this apparatus or antenna during



a thunder or lightning storm. When mounting a TV on the wall, make sure



not to install the TV by hanging the power and signal cables on the back of the TV. Do not allow an impact shock or any objects to



fall into the product, and do not drop anything onto the screen.

Disconnecting the Main Power



The power outlet used with this device must remain easily accessible. Store the accessories (battery, etc.) in a safe



location out of the reach of children. This apparatus use batteries. In your



community there might be regulations that require you to dispose of these batteries properly due to environmental considerations. Please contact your local authorities for disposal or recycling information. Do not dispose of batteries in a fire.



Do not short circuit, disassemble or allow the



batteries to overheat.

Ground Clamp

Electric Service

Equipment

Ground Clamp

NEC: National Electrical Code

Antenna Lead in Wire

Antenna Discharge Unit (NEC Section 810-20)

Grounding Conductor (NEC Section 810-21)

Power Service Grounding Electrode System (NEC Art 250, Part H)

Page 5

Dot Defect



The Plasma or LCD panel is a high technology product with resolution of two million to six million pixels. In a very few cases, you could see fine dots on the screen while you’re viewing the TV. Those dots are deactivated pixels and do not affect the performance and reliability of the TV.

Generated Sound



“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is generated from a highspeed switching circuit, which supplies a large amount of current to operate a product. It varies depending on the product. This generated sound does not affect the performance and reliability of the product. Take care not to touch the ventilation



openings. When watching the TV for a long period, the ventilation openings may become hot. This does not affect the performance of the product or cause defects in the product.

Preventing “Image burn” or “Burn-in” on your TV screen

If a fixed image displays on the TV screen for



a long period of time, it will be imprinted and become a permanent disfigurement on the screen. This is “image burn” or “burn-in” and not covered by the warranty. If the aspect ratio of the TV is set to 4:3 for a



long period of time, image burn may occur on the letterboxed area of the screen. Avoid displaying a fixed image on the TV



screen for a long period of time (2 or more hours for LCD, 1 or more hours for the Plasma TV) to prevent image burn.

IMPORTANT SAFETY INSTRUCTIONS

For USA and Canada

FCC NOTICE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and the receiver.

- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE TO CABLE/TV INSTALLER

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical.

ENGLISH

ENG

Page 6

ENGLISH

ENG

IMPORTANT SAFETY INSTRUCTIONS

Viewing 3D Imaging (For 3D models)

WARNING

Viewing Environment

Viewing Time



- When watching 3D content, take 5 - 15 minute breaks every hour. Viewing 3D content for a long period of time may cause headache, dizziness, fatigue or eye strain.

Those that have a photosensitive seizure or chronic illness

Some users may experience a seizure or other abnormal symptoms when they are exposed to a



flashing light or particular pattern from 3D content. Do not watch 3D videos if you feel nauseous, are pregnant and/ or have a chronic illness such as



epilepsy, cardiac disorder, or blood pressure disease, etc. 3D content is not recommended for those who suffer from stereo blindness or stereo anomaly.



Double images or discomfort in viewing may be experienced. If you have strabismus (cross-eyed), amblyopia (weak eyesight) or astigmatism, you may have trouble



sensing depth and easily feel fatigue due to double images. It is advised to take frequent breaks. If your eyesight varies between your right and left eye, you may experience eye strain.



Symptoms which require discontinuation or refraining from watching 3D contents

Do not watch 3D content when you feel fatigue from lack of sleep, overwork or intoxication.



When these symptoms are experienced, stop using/watching 3D content and get enough rest until



the symptom subsides.

- Consult your doctor when the symptoms persist. Symptoms may include headache, eyeball pain, dizziness, nausea, palpitation, blurriness, discomfort, double image, visual inconvenience or fatigue.

Page 7

IMPORTANT SAFETY INSTRUCTIONS

CAUTION

Viewing Environment

Viewing Distance



- Maintain a distance of at least twice the screen diagonal length when watching 3D content. If you feel discomfort in viewing 3D content, move further away from the TV.

Viewing Age

Infants / Children



- Usage/ Viewing 3D content for children under the age of 5 is prohibited.

- Children under the age of 10 may overreact and become overly excited because their vision is in development (for example: trying to touch the screen or trying to jump into it. Special monitoring and extra attention is required for children watching 3D content.)

- Children have greater binocular disparity of 3D presentations than adults because the distance between the eyes is shorter than one of adults. Therefore they will perceive more stereoscopic depth compared to adults for the same 3D image.

Teenagers



- Advise teenagers under the age of 19 not to watch 3D videos for a long time when they are tired.

Elderly



- The elderly may perceive less of a 3D effect than the youth. Do not sit closer to the TV than the recommended distance.

Cautions when using the 3D glasses

Only use LG 3D glasses. Otherwise, you may not be able to view 3D videos properly.



Do not use 3D glasses instead of your normal glasses, sunglasses or protective goggles.



Using modified 3D glasses may cause eye strain or image distortion.



Do not keep your 3D glasses in extremely high or low temperatures. It will cause deformation.



The 3D glasses are fragile and are easy to scratch. Use a soft, clean piece of cloth when wiping the



lenses. Do not scratch the lenses of the 3D glasses with sharp objects or clean/wipe them with chemicals.

ENGLISH

ENG

Page 8

ENGLISH

ENG

LICENSES / OPEN SOURCE SOFTWARE NOTICE

LICENSES

Supported licenses may differ by model. For more information about licenses, visit 'www.lg.com'.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified DivX video. Visit divx.com for more information and software tools to convert your files into DivX video.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration.

“DivX Certified

“DivX

, DivX Certified® and associated logos are trademarks of Rovi Corporation

or its subsidiaries and are used under license.”

to play DivX® video up to HD 1080p, including premium content.”

device that plays

device must be registered

“Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274”

Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Symbol & DTS and the Symbol together are registered trademarks & DTS 2.0+Digital Out is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.

OPEN SOURCE SOFTWARE NOTICE

To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit 'http://opensource.lge.com'.

In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.

LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased the product.

Page 9

TABLE OF CONTENTS

2 IMPORTANT SAFETY INSTRUCTIONS

6 Viewing 3D Imaging (For 3D models)

8 LICENSES

8 OPEN SOURCE SOFTWARE NOTICE

9 TABLE OF CONTENTS

10 INSTALLATION PROCEDURE

10 ASSEMBLING AND PREPARING

10 Unpacking 12 Optional Extras 14 Parts and buttons 15 Lifting and moving the TV 16 Setting up the TV

16 - Attaching the stand 18 - Mounting on a table 18 - Mounting on a wall 20 - Tidying cables

21 MAKING CONNECTIONS

21 Connecting to an antenna or cable 22 Connecting to a HD receiver, DVD Player or

VCR 22 - HDMI Connection 23 - DVI to HDMI Connection 24 - Connecting to a mobile phone 25 - Component Connection 26 - Composite Connection

27 Connecting to a PC 27 - HDMI Connection or DVI to

HDMI Connection

29 Connecting to an Audio System 29 - Digital Optical Audio Connection

30 Connecting a USB Device

31 REMOTE CONTROL

33 MAGIC REMOTE CONTROL

FUNCTIONS

34 Registering Magic Remote Control 34 How to use Magic Remote Control 34 Precautions to Take when Using the Magic

Remote Control

35 WATCHING TV

35 Turning the TV on for the first time

36 USING THE USER GUIDE

37 SPECIFICATIONS

41 MAINTENANCE

41 Cleaning Your TV 41 - Screen, frame, cabinet and stand 41 - Power cord

42 TROUBLESHOOTING

42 EXTERNAL CONTROL DEVICE SETUP

NOTE

Image shown may differ from your TV.



Your TV’s OSD (On Screen Display) may



differ slightly from that shown in this manual. The available menus and options may differ



from the input source or product model that you are using. New features may be added to this TV in the



future.

ENGLISH

ENG

Page 10

INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING

INSTALLATION PROCEDURE

Open the package and make sure all the accessories are included.

Attach the stand to the TV set.

Connect an external device to the TV set.

Make sure the network connection is available.

You can use the TV network functions only when the network connection is made.

ASSEMBLING AND PREPARING

ENGLISH

ENG

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item.

CAUTION

Do not use any unapproved items to ensure the safety and product life span.



Any damages or injuries by using unapproved items are not covered by the warranty.



Some models appear to have a thin film on the screen. It is actually part of the screen,



do not remove it.

NOTE

The items supplied with your product may vary depending on the model.



Product specifications or contents of this manual may be changed without prior notice due to



upgrade of product functions. For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm (0.39



inches) thick and 18 mm (0.7 inches) width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit



into your TV's USB port.

*A 10 mm (0.39 inches) *B

18 mm (0.7 inches)

Page 11

(For 50PH4700) (For 60PH6700)

AV MODE

INPUT

ENERGY

SAVING

1 2 3

4 5 6

7 809

FLASHBK

LIST

MARK

FAV

P A G

CHVOL

MUTE

INFO

Q.MENU

ENTER

EXIT

BACK

L/R SELECT

FREEZE

RATIO

ASSEMBLING AND PREPARING

Remote Control, Batteries (AAA)

(See p.31)

Magic Remote Control, Batteries (AA)

(See p.33)

Power Cord Stand Body, Stand Base

(See p.16)

Power Cord Holder

(Depending on model) (See p.20)

Ferrite Core

(Depending on model) (See p.13)

Owner’s Manual

Stand Screws

7 EA, M5 x 16 (See p.16)

(For 50PH4700)

Protection Cover

(See p.17)

ENGLISH

ENG

Page 12

ASSEMBLING AND PREPARING

Optional Extras

Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer to buy these items. These devices only work with certain models. The model name or design may be changed manufacturer’s circumstances or policies.

ENGLISH

ENG

AG-S3**

3D Glasses

AN-VC4**

Video Call Camera

Compatibility

AN-MR400

Magic Remote

Touch

Home

AN-TP300

Touch Pen, Cradle

With the Touch Pen, you can use the TV as a touch monitor with or without connecting it to your PC. You need to purchase the Touch Pen (including the cradle) together with the dongle.

LG Audio Device AN-WF100

AN-TD200

Touch Pen Dongle

PH4700 PH6700

Wi-Fi Dongle

AG-S3**

AN-MR400

LG Audio Device

AN-WF100

AN-VC4**

AN-TP300 AN-TD200

3D Glasses

Magic Remote

Wi-Fi Dongle

Video Call Camera

Touch Pen, Cradle

Touch Pen Dongle

• •

•

• •

Page 13

ASSEMBLING AND PREPARING

(Depending on model)

NOTE

How to use the ferrite core



1 Use the ferrite core to reduce the electromagnetic interference in the power cable.

Wind the power cable on the ferrite core once. Place the ferrite core close to the TV and a wall plug.

[to a wall plug] [to the TV]

[Figure 1]

2 Use the ferrite core to reduce the electromagnetic interference in the LAN cable. Wind the LAN cable once on the ferrite core. Place the ferrite core close to the TV.

10 mm (+/-5 mm)

[to an External device]

[Figure 2]

3 Use the ferrite core to reduce the electromagnetic interference in the cable.

Wind the component cable on the ferrite core once. Place the ferrite core close to the TV. .

[to an External device]

10 mm(+ / - 5 mm)

[Figure 3]

[to the TV]

(Black)

[Cross Section of

Ferrite Core]

[Cross Section of

Ferrite Core]

(Black)

[Cross Section of

Ferrite Core]

ENGLISH

ENG

Page 14

ASSEMBLING AND PREPARING

Parts and buttons

Remote Control Sensors

ENGLISH

ENG

Buttons

Power Indicator

Screen

Speakers

Button Description

/ Scrolls through the saved channels.

Adjusts the volume level.

Selects the highlighted menu option or confirms an input.

Accesses the main menus, or saves your input and exits the menus.

Changes the input source.

Turns the power on or off.

Page 15

Lifting and moving the TV

When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.

CAUTION

Avoid touching the screen at all times, as



this may result in damage to the screen.

It is recommended to move the TV in the



box or packing material that the TV originally came in. Before moving or lifting the TV, disconnect



the power cord and all cables. When holding the TV, the screen should face



away from you to avoid damage.

ASSEMBLING AND PREPARING

When transporting a large TV, there should



be at least 2 people. When transporting the TV by hand, hold the



TV as shown in the following illustration.

When transporting the TV, do not expose the



TV to jolts or excessive vibration. When transporting the TV, keep the TV



upright, never turn the TV on its side or tilt towards the left or right.

Hold the top and bottom of the TV frame



firmly. Make sure not to hold the transparent part, speaker, or speaker grill area.

ENGLISH

ENG

Page 16

ASSEMBLING AND PREPARING

Setting up the TV

Put your TV on a pedestal stand and mount the TV on a table or wall.

Attaching the stand

If you are not mounting the TV to a wall, use the following instructions to attach the stand.

CAUTION

When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat



surface to protect the screen from scratches. Make sure that the screws are fastened tightly. (If they are not fastened securely enough, the TV may



tilt forward after being installed.) Do not tighten the screws with too much force; otherwise they may be damaged and come loose



later.

ENGLISH

ENG

Stand Body

Stand Base

3 EA

M5 x 16

Front

4 EA

M5 x 16

Page 17

ASSEMBLING AND PREPARING

To detach the stand,

For 50PH4700

NOTE

Remove the stand before installing the TV on a wall mount by performing the stand attachment in



reverse.

When installing the wall mounting bracket, use the Protection cover. This will protect the opening



from accumulating dust and dirt.

4 EA

M5 x 16

ENGLISH

ENG

1 EA

M5 x 16

Protection Cover

Page 18

ASSEMBLING AND PREPARING

ENGLISH

ENG

Mounting on a table

Lift and tilt the TV into its upright position on a

table.

- Leave a 10 cm (4 inches) (minimum) space from the wall for proper ventilation.

10 cm

(4 inches)

10 cm

Connect the power cord to a wall outlet.

CAUTION

Do not place the TV near or on sources



of heat, as this may result in fire or other damage.

10 cm

Mounting on a wall

An optional wall mount can be used with your LG Television. Consult with your local dealer for a wall mount that supports the VESA standard used by your TV model. Carefully attach the wall mount bracket at the rear of the TV. Install the wall mount bracket on a solid wall perpendicular to the floor. If you are attaching the TV to other building materials, please contact qualified personnel to install the wall mount. Detailed instructions will be included with the wall mount. We recommend that you use an LG brand wall mount.

10 cm

(4 inches)

10 cm

Adjusting the angle of the TV to suit view

Swivel 20 degrees to the left or right and adjust the angle of the TV to suit your view.

20˚20˚

CAUTION

When adjusting the angle of the TV, watch



out for your fingers.

- Personal injury may occur if hands or fingers are pinched. If the product is tilted too

much, it may fall, causing damage or injury.

Make sure to use screws and wall mounts that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table.

Model 50PH4700

VESA (A x B)

Standard screw M6 Number of screws 4 Wall mount bracket

(optional)

60PH6700 400 x 400

PSW420BX

Page 19

ASSEMBLING AND PREPARING

CAUTION

Disconnect the power before moving or



installing the TV. If you install the TV on a ceiling or slanted



wall, it may fall and result in severe injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel. Do not over tighten the screws as this may



cause damage to the TV and void your warranty. Use only screws and wall mounts that meet



the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty.

NOTE

A wall mount bracket is optional. You can



obtain additional accessories from your local dealer. Use only screws that are listed on the VESA



standard screw specifications. The wall mount kit includes an installation



manual and necessary parts. The length of screws may differ depending



on the wall mount. Make sure to use the proper length. For more information, refer to the manual



supplied with the wall mount.

Securing the TV to a wall (optional)

(Depending on model)

Insert and tighten the eye-bolts, or TV brackets

and bolts on the back of the TV.

- If there are bolts inserted at the eye-bolts position, remove the bolts first.

Mount the wall brackets with the bolts to the

wall.

Match the location of the wall bracket and the eye-bolts on the rear of the TV.

Connect the eye-bolts and wall brackets tightly

with a sturdy rope.

Make sure to keep the rope horizontal with the

flat surface.

CAUTION

Make sure that children do not climb on or



hang on the TV.

ENGLISH

ENG

NOTE

Use a platform or cabinet that is strong and



large enough to support the TV securely. Brackets, bolts and ropes are optional. You



can obtain additional accessories from your local dealer.

Page 20

ASSEMBLING AND PREPARING

Tidying cables

Install the power cord holder and power cord.

It will help prevent the power cable from being removed by accident.removed by accident.

Power Cord Holder

Gather and bind the cables with the cable

holder.

ENGLISH

ENG

Cable Holder

CAUTION

Do not move the TV by holding the cable



holder and power cord holder, as the cable holders may break, and injuries and damage to the TV may occur.

Page 21

MAKING CONNECTIONS

This section uses illustrations of the 60PH6700.



You can connect various external devices to the TV. Supported external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. For more information on external device’s connection, refer to the manual provided with each device.

NOTE

If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input cable



to the TV through a DVD recorder or VCR. For more information on recording, refer to the manual provided with the connected device. The external device connections shown may differ slightly from illustrations in this manual.



Connect external devices to the TV regardless of the order of the TV port.



If you connect a gaming device to the TV, use the cable supplied with the gaming device.



Refer to the external equipment’s manual for operating instructions.



Connecting to an antenna or cable

Connect an antenna, cable, or cable box to watch TV while referring to the following. The illustrations may differ from the actual items and a RF cable is optional.

VHF Antenna

UHF Antenna

Antenna

Coaxial (75Ω)

ANTENNA/

CABLE IN

(*Not Provided)

CAUTION

Make sure not to bend the copper wire of



the RF cable.

Copper wire

Complete all connections between devices,



and then connect the power cord to the power outlet to prevent damage to your TV.

Terminal

NOTE

Use a signal splitter to use more than 2 TVs.



Visit http://lgknowledgebase.com for more



information about the antenna and cable connection. Search for antenna. DTV Audio Supported Codec: MPEG, Dolby



Digital

ENGLISH

ENG

Page 22

MAKING CONNECTIONS

Connecting to a HD receiver, DVD Player or VCR

Connect a HD receiver, DVD Player or VCR to the TV and select an appropriate input mode.

HDMI Connection

HDMI is the best way to connect a device.

Transmits digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown in the following illustration.

NOTE

Use the latest High Speed HDMI™ Cable that supports CEC (Customer Electronics Control) function.



High Speed HDMI™ Cables are tested to carry an HD signal up to 1080p and higher.



HDMI Audio Supported Format: DTS (44.1 / 48 kHz), AC3 (32 / 44.1 / 48 kHz), L-PCM (32 / 44.1 / 48 /



96 / 192 kHz)

Choose any HDMI IN input port to connect. It does not matter which port you use.

ENGLISH

ENG

IN (ARC)

IN 3 (MHL)

IN 2 (PC)

HDMI

(*Not Provided)

DVD / Blu-Ray / HD Cable Box / HD STB

ARC (Audio Return Channel)

When connected with a high-speed



HDMI cable, digital audio can be sent to a compactible device without an additional optical audio cable. ARC is only supported on the HDMI



IN(ARC) 1 port. An external audio device that supports ARC should be connected to HDMI 1 if you wish to use ARC.

Page 23

MAKING CONNECTIONS

AV IN

AUDIO

DVI to HDMI Connection

Transmits digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown in the following illustration. To transmit an audio signal, connect an audio cable.

NOTE

When using the HDMI/DVI cable, Single link is only supported.



IN 2 (PC)

(*Not Provided)

AUDIO IN (PC)

IDE

COMPONENT

IDE

L/MONO

AUDIO

ENGLISH

ENG

RED

WHITE

(*Not Provided)

$8',2287

'9,287

DVD / Blu-Ray / HD Cable Box

Page 24

MAKING CONNECTIONS

Connecting to a mobile phone

Mobile High-definition Link (MHL) is an interface for transmitting digital audiovisual signals from mobile phones to television sets.

NOTE

Connect the mobile phone to the HDMI IN 3 (MHL) port to view the phone screen on the TV.



This only works for the MHL-enabled phone.



With some MHL supporting mobile phones, you can use the TV remote to control the phone.



An MHL passive cable is needed to connect the TV and a mobile phone.



MHL Cable

IN 3 (MHL)

(*Not Provided)

ENGLISH

ENG

Mobile phone

Page 25

MAKING CONNECTIONS

Component Connection

Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with a component cable as shown in the following illustration.

NOTE

If cables are installed incorrectly, it could case the image to display in black and white or with



distorted color.

Check to ensure each cable is matched with the corresponding color connection.



AUDIO IN (PC)

VIDEO

COMPONENT

AV IN

VIDEO

L/MONO

GREEN

(*Not Provided)

GREEN

BLUEBLUE

REDRED

VIDEO

AUDIO

LPBP

AUDIO

WHITE

L R

AUDIO

RED

(*Not Provided)

RED

ENGLISH

ENG

DVD / Blu-Ray / HD Cable Box / VCR

Page 26

ENGLISH

AUDIO

ENG

MAKING CONNECTIONS

Composite Connection

Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cable as shown in the following illustration.

NOTE

If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the TV.



AUDIO IN (PC)

AV IN

VIDEO

COMPONENT

IDEO

L/MONO

AUDIO

YELLOW

WHITE

RED

(*Not Provided)

YELLOW

WHITE

RED

VIDEO

( )

MONO

AUDIOL R

VCR / DVD / Blu-Ray / HD Cable Box

Page 27

MAKING CONNECTIONS

Connecting to a PC

NOTE

It is recommended to use the HDMI connection for the best image quality.



Depending on the graphics card, DOS mode video may not work if a HDMI to DVI Cable is in use.



In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or



brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear. The synchronization input form for Horizontal and Vertical frequencies is separate.



Depending on the graphics card, some resolution settings may not allow the image to be positioned



on the screen properly. When using the HDMI/DVI cable, Single link is only supported.



HDMI Connection or DVI to HDMI Connection

Choose method A or B to make connection.

Method A: HDMI Connection

IN (ARC)

IN 3 (MHL)

IN 2 (PC)

Choose any HDMI input port to connect. It does not matter which port you use.

HDMI

(*Not Provided)

ENGLISH

ENG

Page 28

MAKING CONNECTIONS

HDMI

IN (ARC)

IN 3 (MHL)

IN 2 (PC)

AV IN

AUDIO

Method B: DVI to HDMI Connection

AUDIO IN (PC)

IDE

COMPONENT

L/MONO

WHITE

AUDIO

RED

IN 2 (PC)

(*Not Provided)

ENGLISH

ENG

(*Not Provided)

$8',2287

'9,287

Page 29

MAKING CONNECTIONS

Connecting to an Audio System

You can use an optional external audio system instead of the built-in speaker.

Digital Optical Audio Connection

Transmits a digital audio signal from the TV to an external device. Connect the external device and the TV with the optical audio cable as shown in the following illustration.

Digital Audio System

OPTICAL

DIGITAL

AUDIO OUT

OPTICAL

ENGLISH

ENG

(*Not Provided)

AUDIO IN

Page 30

MAKING CONNECTIONS

Connecting a USB Device

Connect a USB storage device such as a USB flash memory, external hard drive, or a USB memory card reader to the TV and access the Smart Share menu to use various multimedia files.

Choose any USB input port to connect. It does not matter which port you use.

(*Not Provided)

USB IN 3

ENGLISH

ENG

USB IN

USB IN 2

USB

Page 31

REMOTE CONTROL

HOMEBACK

REMOTE CONTROL

For 50PH4700

The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To install batteries, open the battery cover, insert batteries (1.5 V AAA) matching the

and ends to the label inside the compartment, and close the battery cover. To

remove the batteries, perform the installation actions in reverse.

CAUTION

Do not mix old and new batteries, as this may damage the remote control.



This remote uses infrared light. When in use, it should be pointed in the direction of the TV’s remote sensor.

RATIO

INPUT

1 2 3

4 5 6

7 809

LIST

FAV

MUTE

INFO

SMART

FLASHBK

CHVOL

Q.MENU

MY APPS

(POWER

(User-Guide)

P A G E

Number button

- (Dash)

LIST

FLASHBK

)

Turns the TV on or off.

Sees User-Guide.

RATIO

Resizes an image.

INPUT

Changes the input source. Turns the TV on if it is off.

Returns to the last TV channel.

Enters numbers.

Inserts a dash between numbers such as 2-1 and 2-2.

Accesses the saved channel list.

Alternates between the two last channels selected (pressing repeatedly).

ENGLISH

ENG

EXIT

AV MODE

BACK

SLEEP

SETTINGS

Page 32

REMOTE CONTROL

REC

ENGLISH

ENG

RATIO

INPUT

1 2 3

4 5 6

7 809

LIST

FAV

MUTE

INFO

SMART

FLASHBK

CHVOL

Q.MENU

MY APPS

VOL

Adjusts the volume level.

FAV

Accesses your favorite channel list.

Used for viewing 3D video.

MUTE

Mutes all sounds.

Scrolls through the saved channels.

PAGE

Moves to the previous or next screen.

INFO

P A G E

Shows information on the current program.

SMART

Accesses the Smart Home menu.

MY APPS

Shows the list of Apps.

Q. MENU

Accesses the quick menu.

Navigation buttons

(up/down/left/right)

Scrolls through menus or options.

AV MODE

BACK

SETTINGS

EXIT

SLEEP

Selects menus or options and confirms your input.

BACK

Returns to the previous level.

AV MODE

Selects an AV mode.

EXIT

Clears all on-screen displays and returns to TV viewing.

Color buttons ( : Red, : Green, : Yellow, : Blue)

These access special functions in some menus.

Control buttons (

, , , , )

Controls the Premium contents, Smart Share menus, or the SIMPLINK compatible devices (USB,SIMPLINK).

(Freeze)

Freezes the current frame. (Not supported when using USB Mode and Simplink).

SLEEP

Sets the length of time until the TV to turns off.

SETTINGS

Accesses the main menu.

Accesses the AV devices connected to the TV; Opens the SIMPLINK menu.

Page 33

MAGIC REMOTE CONTROL FUNCTIONS

VOL

/Q.MENU

BACK SMART

MAGIC REMOTE CONTROL FUNCTIONS

For 60PH6700

When the message “Magic remote control battery is low. Change the battery.” is displayed, replace the battery. To install batteries, open the battery cover, insert batteries (1.5 V AA) matching and close the battery cover. Be sure to point the remote control at the remote control sensor on the TV. To remove the batteries, perform the installation actions in reverse.

CAUTION

Do not mix old and new batteries, as this may damage the remote control.



This remote uses infrared light. When in use, it should be pointed in the direction of the TV’s remote sensor.

and ends to the label inside the compartment,

Selects menus or options and confirms

Scrolls through the saved channels.

If you press the navigation button while

moving the pointer on the screen,

the pointer disappears, and the Magic

remote control works as a regular

To display the pointer again, shake the

Magic remote control from side to side.

Returns to the previous screen.

-This is a beta version and only available in selected functions for supported

-Network connection is required to use the voice recognition function.

1. Press the Voice recognition button.

2. Speak slowly and precisely.

When a voice is recognized, the

processing message appears on the

• Use the magic remote control no further than 10 cm from your face.

Used for viewing 3D video.

Wheel (OK)

your input.

remote control.

Voice recognition

models.

BACK

screen.

Pointer (RF transmitter)

(POWER)

Turns the TV on or off.

Navigation buttons

(up/down/left/right) Scrolls through menus or options.

SMART

Accesses the Smart Home menu.

/Q.MENU

Accesses the Universal Control. Accesses the quick menu.

VOL

Adjusts the volume level.

Scrolls through the saved channels.

(MUTE)

Mutes all sounds.

ENGLISH

ENG

Page 34

MAGIC REMOTE CONTROL FUNCTIONS

ENGLISH

ENG

Registering Magic Remote Control

The Magic Remote Control operates by pairing with your TV. Once you purchased the TV, please register the Magic remote control as follows;

How to register the Magic Remote Control

(Wheel)

To register automatically, turn the TV on and press the registration is completed, the completion message appears on the screen. If registration fails, turn the TV off and back on, then press the complete registration.

Wheel (OK)

. When

How to Re-register the Magic Remote Control

BACK

and

button

BACK

SMART

1 Press and hold the

2 To re-register the Magic remote control,

buttons together for 5

SMART

seconds to reset, then register it by following “How to register the Magic remote control” above.

press and hold the for 5 seconds toward the TV. When registration is completed, the completion message appears on the screen.

How to use Magic Remote Control

1 You can move the pointer by aiming the

Pointer Receiver of the remote control at your TV then move it left, right, up or down.

If the pointer does not work properly



leave the remote control for 10 seconds then use it again.

2 If the pointer disappears, move the

remote control slightly to left or right. Then, it will automatically appear on the screen.

If the pointer has not been used for a



certain period of time, it will disappear.

132

If you press remote control, the screen appears.

Shows information about the current program and screen.

Pressing this button will display number

keypad which you can select channel number.

You can select My Apps Menu.

Wheel (OK)

on the Magic

Precautions to Take when Using the Magic Remote Control

Use the Magic remote control within the



maximum communication distance (10 m,

32.8ft). Using the remote control beyond this distance, or with an object obstructing it, may cause a communication failure. A communication failure may occur due to



nearby devices. Electrical devices such as a microwave oven or wireless LAN product may cause interference, as these use the same bandwidth (2.4 GHz) as the Magic remote control. The Magic remote control may be damaged



or may malfunction if it is dropped or receives a heavy impact. Take care not to bump into nearby furniture



or other people when using the Magic remote control. Manufacturer and installer cannot provide



service related to human safety as the applicable wireless device has possibility of electric wave interference. It is recommended that an Access Point (AP)



be located more than 1 m (3.28 ft) away from the TV. If the AP is installed closer than 1 m (3.28 ft), the Magic remote control may not perform as expected due to frequency interference.

Page 35

WATCHING TV

Turning the TV on for the first time

When you turn the TV on for the first time, the Initial setting screen appears. Select a language and customize the basic settings.

Connect the power cord to a power outlet.

In Standby mode, press the power button on

the remote control to turn the TV on.

The Initial setting screen appears when you turn the TV on for the first time.

NOTE

You can also access



accessing

Follow the on-screen instructions to customize

your TV settings according to your preferences.

Language Selection Select a language to

Enviroment Selection Select

Picture Mode Setting

OPTION



Initial Setting

in the main menu.

display.

home environment.

Select use as default. (Depending on country)

for the

Home

Picture Mode

NOTE

To display images in the best quality for your



home environment, select Home Use. Store Demo is suitable for the retail



environment. If you select Store Demo, any customized



settings will switch back to the default settings of Store Demo in 5 minutes.

When the basic settings are complete,

press the

Wheel (OK)

button.

NOTE

If you do not complete the Initial setting, it



will appear whenever the TV turns on. Disconnect the power cord from the power



outlet when you do not use the TV for a long period of time.

To turn the TV off, press the power button on

the remote control.

ENGLISH

ENG

Time Zone Setting



Network Connection Set your network to



ZIP Code



Wireless Touch Pen

Setting



Select TV Watching

Type



Auto Tuning



Setting is complete



Experience Magic

Remote Control

Select the time zone and daylight saving options. (Depending on country)

enable network-related features on the TV.

Input your Zip Code.

Connect wireless touch pen dongle to the USB port of the TV then turn it on. (Optional extras)

Select a type to watch TV.

Scans and saves available channels automatically.

Confirms the setting options.

Simple guide of Magic Remote Control (Depending on model)

Page 36

USING THE USER GUIDE

ENGLISH

ENG

USING THE USER GUIDE

User Guide allows you to more easily access the detailed TV information

Press the

SMART

Smart Home menu

Select

User Guide

button to access the

and press the OK button



User Guide

OPTION > To set language

SMART  Settings  OPTION  Language

Selects Menu Language and Audio Language displayed on the screen.

Selects a screen menu language.

Language

[In Digital Mode Only]

Audio

When watching a digital broadcast containing several audio

Language

languages, you can select the language you want.

[In Digital mode Only] Use the Subtitle function when two or more subtitle

Subtitle

languages are broadcast.

Language

✎ If subtitle data in a selected language is not broadcast,

the default language subtitle will be displayed.

Shows the description of the selected

menu. You can use

/ to move

between pages.

Moves to the selected menu directly

from the User Guide.

Try Now

To use input device

To set time options

CHANNEL Setting

PICTURE, SOUND Setting

OPTION

LG SMART Function

Advanced Function

Information

Shows the video you were watching.

Guide categories.

To set TV lock options

To set language

To set caption

To set Magic remote control

To set other options

2 3

Index

(Depending on country)

List of topics in the current category.

You can use

/ button to move

between pages.

An index of key words present in the

User Guide.

Provides the detailed information on the functions of LG Smart TV when the

Internet is connected. (It may not be available depending on the country/language.)

Online User Guide

Page 37

SPECIFICATIONS

Product specifications may be changed without prior notice due to upgrade of product functions.

Power requirement AC 100 - 240 V ~ 50 / 60 Hz

Television System NTSC-M, ATSC, 64 & 256 QAM

Program Coverage VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135

External Antenna Impedance

Environment condition

Operating Temperature

Operating Humidity Less than 80 %

Storage Temperature -20 - 60 °C

Storage Humidity Less than 85 %

0 - 40 °C

MODELS

Dimensions (Width x Height x Depth)

Weight With stand 25.4 Kg (55.9 lbs)

Current Value / Power consumption 2.75 A / 275 W

Dimensions (Width x Height x Depth)

Weight With stand 37.7 Kg (83.1 lbs)

Current Value / Power consumption 3.9 A / 390 W

With stand

Without stand

Without stand 24.0 Kg (52.9 lbs)

MODELS

With stand

Without stand

Without stand 34.5 Kg (76.0 lbs)

50PH4700

(50PH4700-UD)

1,168 x 755.4 x 292.7 (

45.9 x 29.7 x 11.5 (inch)

1,168 x 698.6 x 57.0 (

45.9 x 27.5 x 2.2 (inch)

60PH6700

(60PH6700-UB)

1,386.8 x 874 x 340 (

54.5 x 34.4 x 13.3 (inch)

1,386.8 x 821.7 x 57 (

54.5 x 32.3 x 2.2 (inch)

ENGLISH

ENG

mm)

Page 38

SPECIFICATIONS

3D supported mode

 Video, which is input as HDMI,USB,DLNA, is switched into the 3D screen automatically. (This function

does not support all of the 3D video format. The specific 3D video format is not switched into the 3D screen automatically.)

3D supported mode automatically

ENGLISH

ENG

Input Signal

1080p

HDMI

USB

DLNA

DTV

S/S : Side by Side , T/B : Top & Bottom, F/P : Frame Packing, F/A : Field Alternative L/A : Line Alternative, S/S Full :Side by Side Full, C/B : Checker Board R/I : Row Interleaving, C/I: Column Interleaving, F/S : Single Frame Sequential

1080i

720p

480p

1080p 33.75 30 S/S, T&B, C/B, MPO(Photo)

Horizontal

Frequency (kHz)

54.00 24

67.50 30

27.00 24

33.75 30

67.50 60

67.50

33.75 S/S, T&B, S/S Full

90.00 F/P, L/A

45.00 S/S, T&B, S/S Full

63.00 F/P, L/A

31.50 T/B, S/S, S/S Full

Vertical

Frequency (Hz)

Playable 3D video format

Dual Stream

Playable 3D video format

F/P, L/A

F/P, F/A

Page 39

 For models supporting Miracast™ / WiDi, you can set the 3D mode.

3D supported mode manually

Input Signal Playable 3D video format

ATV(CVBS)

Component

HDMI-PC

HDMI-DTV

USB / DLNA

(Movie)

USB / DLNA

(Photo)

Miracast™ /

WiDi

1080p

Others 2D to 3D, S/S, T&B

Interlace 2D to 3D, S/S, T&B

Progressive

704 x 480p (Over)

704 x 480i (Over) 2D to 3D, S/S, T&B

704 x 480 (Under) 2D to 3D

320 x 240 (Over) 2D to 3D, S/S, T&B

320 x 240 (Under) 2D to 3D

1024 x 768p

1920 x 1080p

Others 2D to 3D

2D to 3D, S/S, T&B

2D to 3D, S/S, T&B, C/B, R/I, C/I

(60Hz : F/S)

2D to 3D, S/S, T&B, C/B, R/I, C/I

(60Hz : F/S )

2D to 3D, S/S, T&B, C/B, R/I, C/I

(60Hz : F/S )

2D to 3D, S/S, T&B1280 x 720p

SPECIFICATIONS

ENGLISH

ENG

Page 40

SPECIFICATIONS

ENGLISH

ENG

HDMI/DVI-DTV supported mode

Resolution

720x480

1280x720

1920x1080

Horizontal

Frequency (kHz)

31.469

31.5

44.96 45

33.72

33.75

26.97 27

33.716

33.75

67.43

67.5

Frequency (Hz)

Component port connecting information

Component ports

on the TV

Video output ports

on DVD player

Y P

Y B-Y R-Y

Y Cb Cr

Y Pb Pr

Vertical

59.94 60

23.97 24

29.976

30.00

59.94 60

Wireless LAN module (WN8122E1) specification

(For 60PH6700)

Standard

Frequency Range

Output Power (Max.)

Because band channel used by the country



IEEE802.11a/b/g/n

2400 to 2483.5 MHz 5150 to 5250 MHz 5725 to 5850 MHz

802.11a: 16.5 dBm

802.11b: 16 dBm

802.11g: 15.5 dBm

802.11n - 2.4GHz: 15.5 dBm

802.11n - 5GHz: 16.5 dBm

could be different, the user can not change or adjust the operating frequency and this product is set for the regional frequency table. Contains FCC ID: BEJWN8122E1



Contains IC: 2703H-WN8122E1



Bluetooth module (BM-LDS401) specification

Standard

Frequency Range

Output Power (Max.)

Contains FCC ID: BEJLDS401



Contains IC: 2703H-LDS401



Bluetooth Version 3.0

2400 ~ 2483.5 MHz

10 dBm or lower

Signal Component

480i O

480p O

720p/1080i O

1080p

(60 Hz only)

Page 41

MAINTENANCE

Cleaning Your TV

Clean your TV regularly to keep the best performance and to extend the product lifespan.

CAUTION

Before Cleaning, turn the power off and disconnect the power cord and all other cables.



When the TV is left unattended or unused for a long time, disconnect the power cord from the wall



outlet to prevent possible damage from lightning or power surges.

Screen, frame, cabinet and stand

To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth. To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild detergent. Then wipe immediately with a dry cloth.

CAUTION

Do not push, rub, or hit the surface with your fingernail or a sharp object, as this may result in



scratches on the screen and image distortions. Do not use any chemicals, such as waxes, benzene, alcohol, thinners, insecticides, air fresheners,



lubricants, as these may damage the screen’s finish and cause discoloration. Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or



malfunction.

Power cord

Remove the accumulated dust or dirt on the power cord regularly.

ENGLISH

ENG

Page 42

TROUBLESHOOTING / EXTERNAL CONTROL DEVICE SETUP

TROUBLESHOOTING

Problem Solution

Cannot control the TV with the remote control.

No image display and no sound is produced.

The TV turns off suddenly.

When connecting to the PC, ‘No Signal’ or ‘Invalid Format’ is displayed.

Check the remote control sensor on the product and try again.



Check if there is any obstacle between the product and the remote



control. Check if the batteries are still working and properly installed



(

to , to ).

Check if the product is turned on.



Check if the power cord is connected to a wall outlet.



Check if there is a problem in the wall outlet by connecting other



products.

Check the power control settings. The power supply may be



interrupted. Check if the Auto sleep feature is activated in the Time settings.



If there is no signal while the TV is on, the TV will turn off



automatically after 15 minutes of inactivity.

Turn the TV off/on.



Reconnect the HDMI cable.



Restart the PC with the TV on.



ENGLISH

ENG

EXTERNAL CONTROL DEVICE SETUP

To obtain the external control device setup information, please visit 'www.lg.com'.

Page 43

CHILD SAFETY:

It Makes A Difference How and Where

You Use Your Flat Panel Display

Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind:

THE ISSUE

The home theater entertainment experience is a growing trend and

larger flat panel displays are popular purchases. However, flat panel displays are not always supported on the proper stands or installed according to the manufacturer’s recommendations.

Flat panel displays that are inappropriately si tuated on dressers,

bookcases, shelves, desks, speakers, chests or carts may fall over and cause injury.

THIS MANUFACURER CARES!

The consumer electronics industry is committed to making home

entertainment enjoyable and safe.

TUNE INTO SAFETY

O n e s i z e doe s N O T f i t a l l . F o l lo w the ma n u f ac t u r er ’s

recommendations for the safe installation and use of your flat panel display.

Carefully read and understand all enclosed instructions for proper use

of this product.

Don’t allow children to climb on or play with furniture and television

sets.

Don’t allow place flat panel displays on furniture that can easily be

used as steps, such as a chest of drawers.

Reme mb er t ha t ch il dren c an b ec ome ex cited wh ile wa tching

a program, especially on a “larger than life” flat panel display. Care should be taken to place or install the display where it cannot be pushed, pulled over, or knocked down.

Care should be taken to route all cords and cables connected to the

flat panel display so that they cannot be pulled or grabbed by curious children.

WALL MOUNTING: IF YOU DECIDE TO WALL MOUNT

YOUR FLAT PANEL DISPLAY, ALWAYS:

Use a mo u n t th a t ha s b e e n r e c omme n d ed b y th e d i s play

manuf a c t u rer a n d / o r lis t e d by an in d e p e n dent l a b orator y (such as UL, CSA, ETL).

Follow all instructions supplied by the display and wall mount

manufacturers.

If you have any doubts about your ability to safely install your flat

panel display, contact your retailer about professional installation.

Make sure that the wall where you are mounting the display is

appropriate. Some wall mounts are not designed to be mounted to walls with steel st uds or o l d c ind er bloc k c onst ruct ion. If you are unsure, contact a professional installer.

A mi n i m u m of tw o peo p l e ar e r e q u i r e d for i n stallation.

Flat panel displays can be heavy

Page 44

The model and serial number of the TV is located on the back and/or one side of the TV. Record it below should you ever need service.

MODEL

SERIAL

LG Customer Information Center

For inquires or comments, visit www.lg.com or call;

1-800-243-0000 1-888-865-3026 1-888-542-2623

USA, Consumer User

USA, Commercial User

CANADA

www.lg.com

Page 45

OWNER’S MANUAL

EXTERNAL CONTROL DEVICE SETUP

Please read this manual carefully before operating the set and retain it for future reference.

www.lg.com

Page 46

KEY CODES

ENGLISH

ENG

KEY CODES

• This feature is not available for all models.

Code

(Hexa)

00 CH +, PR + R/C Button 45 Q.Menu R/C Button

01 CH -, PR - R/C Button 4C List, - (ATSC Only) R/C Button

02 Volume + R/C Button 53 List R/C Button

03 Volume - R/C Button 5B Exit R/C Button

06 > (Arrow Key / Right Key) R/C Button 61 Blue R/C Button

07 < (Arrow Key / Left Key) R/C Button 63 Yellow R/C Button

08 Power R/C Button 71 Green R/C Button

09 Mute R/C Button 72 Red R/C Button

0B Input R/C Button 79 Ratio / Aspect Ratio R/C Button

0E SLEEP R/C Button 91 AD (Audio Description) R/C Button

0F TV, TV/RAD R/C Button 7A User Guide R/C Button

10 - 19 Number Key 0 - 9 R/C Button 7C Smart / Home R/C Button

1A Q.View / Flashback R/C Button 7E SIMPLINK R/C Button

Function Note

Code

(Hexa)

Function Note

1E FAV (Favorite Channel) R/C Button 8E ►► (Forward) R/C Button

20 Text (Teletext) R/C Button 8F ◄◄ (Rewind) R/C Button

21 T. Opt (Teletext Option) R/C Button AA Info R/C Button

28 Return (BACK) R/C Button AB Program Guide R/C Button

30 AV (Audio / Video) Mode R/C Button B0 ► (Play) R/C Button

39 Caption/Subtitle R/C Button B1 ꕗ (Stop / Live TV) R/C Button

40 Λ

42 My Apps R/C Button DC 3D R/C Button

43 Menu / Settings R/C Button 9F App / * R/C Button

44 OK / Enter R/C Button

* Key code 4C (0x4C) is available on ATSC/ISDB models which use major/minor channel.

(For South Korea, Japan, North America, Latin America except Colombia models)

(Arrow Key / Cursor Up)

V (Arrow Key / Cursor

Down)

R/C Button BA

R/C Button BD ꔄ (REC) R/C Button

ꕘ (Freeze / Slow Play /

Pause)

R/C Button

Page 47

EXTERNAL CONTROL DEVICE SETUP

• Image shown may differ from your TV.

Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally.

Note: The type of control port on the TV can be different between model series.

* Please be advised that not all models support this type of connectivity.

* Cable is not provided.

USB to Serial converter with USB Cable

USB Type

(PC)

• LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial converter

which is not made nor provided by LG.

• It can be purchased from computer stores that carry accessories for IT support professionals.

USB IN

(TV)

ENGENGLISH

Page 48

EXTERNAL CONTROL DEVICE SETUP

USB IN

(TV)

(PC)

RS-232C IN

(CONTROL & SERVICE)

(TV)

USB IN

(TV)

(PC)

RS-232C IN

(CONTROL & SERVICE)

(TV)

(PC)

(PC

SERVICE ONLY

ENGLISH

ENG

RS-232C with RS-232C Cable (Legacy)

Phone jack Type

• You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and

the TV, which is specified in the manual.

* For other models, connect to the USB port.

(PC)

- This connection can only be used for the following models: 55/47/39LN5450-UA, 55/50/47/42LN5400-UA, 42/39/32LN5300-UA, and 37/32LN530B-UA.

SERVICE ONLY

)

RS-232C IN

- This connection can only be used for the following models: 42/50PN4500-UA, 50/60PN5300-UF, 50/60PN6500-UA, and 60PN6550-UA.

(CONTROL & SERVICE)

(TV)

Customer Computer RS-232C configurations

3-Wire Configurations(Not standard)

RS-232C

(Serial port)

Set ID

For Set ID number, see "Real Data Mapping" on p.6

1. Press SETTINGS to access the main menus.

2. Press the Navigation buttons to scroll to OPTION and press OK.

3. Press the Navigation buttons to scroll to SET ID and press OK.

4. Scroll left or right to select a set ID number and select CLOSE. The adjustment range is 1-99.

5. When you are finished, press EXIT.

RXD 2 2 TXD

TXD 3 1 RXD

GND 5 3 GND

RXD 3 2 TXD

TXD 2 1 RXD

GND 5 3 GND

PC TV

D-Sub 9 Phone

Page 49

EXTERNAL CONTROL DEVICE SETUP

Communication Parameters

• Baud rate : 9600 bps (UART)

• Data length : 8 bits

• Parity : None

• Stop bit : 1 bit

• Communication code : ASCII code

• Use a crossed (reverse) cable.

Command reference list

(Depending on model)

COMMAND1 COMMAND2

01. Power off k a 00 13. Balance k t 00 to 64

02. Aspect Ratio

03. Screen Mute

04. Volume Mute

05. Volume Control

06. Contrast k g 00 to 64

07. Brightness

08. Color/ Colour

09. Tint k j 00 to 64

10. Sharpness

11. OSD Select

12. Remote Control Lock Mode

k c (p.7)

k d (p.7)

k e 00 to 01

k f 00 to 64

k h 00 to 64 19. Key m c Key Codes

k i 00 to 64

k k 00 to 32

k l 00 to 01

k m 00 to 01

DATA

(Hexadecimal)

14. Color (Colour) Temperature

15. ISM Method (Only Plasma TV)

16. Energy Saving

17. Tune Command

18. Channel (Programme) Add/Del(Skip)

20. Control Back Light, Control Panel Light

21. Input select (Main)

22. 3D (Only 3D models)

23. Extended 3D (Only 3D models)

COMMAND1 COMMAND2

x u 00 to 64

j p (p.8)

j q 00 to 05

m a (p.8)

m b 00 to 01

m g 00 to 64

x b (p.10)

x t (p.11)

x v (p.11)

* Note: During USB operations such as DivX or EMF, all commands except Power(ka) and Key(mc) are

not executed and treated as NG.

DATA

(Hexadecimal)

ENGENGLISH

Page 50

EXTERNAL CONTROL DEVICE SETUP

ENGLISH

ENG

Transmission / Receiving Protocol

Transmission

[Command1][Command2][ ][Set ID][ ][Data][Cr]

[Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu.

Adjustment range in TV is 1 to 99. If [Set ID] value is selected to ‘0’, every connected set can be controlled.

* [Set ID] is indicated as decimal (1 to 99) on menu and as Hexadecimal (0x00 to 0x63) on

transmission/receiving protocol. [DATA] : To transmit command data (hexadecimal). Transmit ‘FF’ data to read status of command. [Cr] : Carriage Return - ASCII code ‘0x0D’ [ ] : Space – ASCII code ‘0x20’

OK Acknowledgement

[Command2][ ][Set ID][ ][OK][Data][x]

* The set transmits ACK (acknowledgement) based on this format when receiving normal data. At this time,

if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of the PC computer.

Error Acknowledgement

[Command2][ ][Set ID][ ][NG][Data][x]

* The set transmits ACK (acknowledgement) based on this format when receiving abnormal data from non-

viable functions or communication errors.

Data 00: Illegal Code

Real data mapping (Hexadecimal b Decimal)

* When you enter the [data] in hexadecimal, refer to following conversion table.

* Channel Tune (ma) Command uses two-byte hexadecimal value([data]) to select channel number.

00 : Step 0 32 : Step 50 (Set ID 50) FE : Step 254 01 : Step 1 (Set ID 1) 33 : Step 51 (Set ID 51) FF : Step 255

... ... ...

0A : Step 10 (Set ID 10) 63 : Step 99 (Set ID 99) 01 00 : Step 256

... ... ...

0F : Step 15 (Set ID 15) C7 : Step 199 27 0E : Step 9998 10 : Step 16 (Set ID 16) C8 : Step 200 27 0F : Step 9999

... ... ...

Page 51

EXTERNAL CONTROL DEVICE SETUP

* Commands may work differently depending on model and signal.

01. Power (Command: k a)

► To control Power Off of the set.

Transmission[k][a][ ][Set ID][ ][Data][Cr]

Data 00 : Power Off

Ack [a][ ][Set ID][ ][OK/NG][Data][x]

► To Show Power On. (Works TV is On Only)

Transmission [k][a][ ][Set ID][ ][FF][Cr]

Ack [a][ ][Set ID][ ][OK][01][x]

* Similarly, if other functions transmit ‘FF’ data

based on this format, Acknowledgement feedback presents status about each function.

02. Aspect Ratio (Command: k c) (Main Picture Size)

► To adjust the screen format. (Main picture format)

You can also adjust the screen format using the Aspect Ratio in the Q.MENU. or PICTURE menu.

Transmission [k][c][ ][Set ID][ ][Data][Cr]

Data 01 : Normal screen

(4:3)

02 : Wide screen

(16:9) 04 : Zoom 05 : Zoom 2 (Latin America

except Colombia Only)

06 : Set by Program/

Original

Ack [c][ ][Set ID][ ][OK/NG][Data][x]

07 : 14:9 (Europe, Colombia, Mid-East, Asia except South Korea and Japan) 09 : * Just Scan 0B : Full Wide (Europe, Colombia, MidEast, Asia except South Korea and Japan) 10 to 1F : Cinema Zoom 1

to 16

* In case of video mute on only, TV will display On

Screen Display(OSD). But, in case of Screen mute on, TV will not display OSD.

04. Volume Mute (Command: k e)

► To control volume mute on/off.

You can also adjust mute using the MUTE button on remote control.

Transmission [k][e][ ][Set ID][ ][Data][Cr]

Data 00 : Volume mute on (Volume off) 01 : Volume mute off (Volume on)

Ack [e][ ][Set ID][ ][OK/NG][Data][x]

05. Volume Control (Command: k f)

► To adjust volume.

You can also adjust volume with the volume buttons on remote control.

Transmission [k][f][ ][Set ID][ ][Data][Cr]

Data Min : 00 to Max : 64

Ack [f][ ][Set ID][ ][OK/NG][Data][x]

06. Contrast (Command: k g)

► To adjust screen contrast.

You can also adjust contrast in the PICTURE menu.

Transmission [k][g][ ][Set ID][ ][Data][Cr]

Data Min : 00 to Max : 64

Ack [g][ ][Set ID][ ][OK/NG][Data][x]

ENGENGLISH

* Using the PC input, you select either 16:9 or 4:3

screen aspect ratio.

* In DTV/HDMI/Component mode (high-definition),

Just Scan is available.

* Full wide mode may work differently based on

model and is supported for DTV fully, and ATV, AV partially.

03. Screen Mute (Command: k d)

► To select screen mute on/off.

Transmission [k][d][ ][Set ID][ ][Data][Cr]

Data 00 : Screen mute off (Picture on)

Video mute off 01 : Screen mute on (Picture off) 10 : Video mute on

Ack [d][ ][Set ID][ ][OK/NG][Data][x]

07. Brightness (Command: k h)

► To adjust screen brightness.

You can also adjust brightness in the PICTURE menu.

Transmission [k][h][ ][Set ID][ ][Data][Cr]

Data Min : 00 to Max : 64

Ack [h][ ][Set ID][ ][OK/NG][Data][x]

08. Color/Colour (Command: k i)

► To adjust the screen Color(Colour).

You can also adjust colour in the PICTURE menu.

Transmission [k][i][ ][Set ID][ ][Data][Cr]

Data Min : 00 to Max : 64

Ack [i][ ][Set ID][ ][OK/NG][Data][x]

Page 52

EXTERNAL CONTROL DEVICE SETUP

ENGLISH

ENG

09. Tint (Command: k j)

► To adjust the screen tint.

You can also adjust tint in the PICTURE menu.

Transmission [k][j][ ][Set ID][ ][Data][Cr]

Data Red : 00 to Green : 64

Ack [j][ ][Set ID][ ][OK/NG][Data][x]

10. Sharpness (Command: k k)

► To adjust the screen sharpness.

You can also adjust sharpness in the PICTURE menu.

Transmission [k][k][ ][Set ID][ ][Data][Cr]

Data Min : 00 to Max : 32

Ack [k][ ][Set ID][ ][OK/NG][Data][x]

11. OSD Select (Command: k l)

► To select OSD (On Screen Display) on/off when

controlling remotely.

Transmission [k][l][ ][Set ID][ ][Data][Cr]

Data 01 : OSD off 01 : OSD on

Ack [l][ ][Set ID][ ][OK/NG][Data][x]

12. Remote control lock mode (Command: k m)

► To lock the front panel controls on the monitor and

remote control.

Transmission [k][m][ ][Set ID][ ][Data][Cr]

Data 01 : Lock off 01 : Lock on

14. Color(Colour) Temperature (Command: x u)

► To adjust colour temperature. You can also adjust

Color(Colour) Temperature in the PICTURE menu.

Transmission [x][u][ ][Set ID][ ][Data][Cr]

Data Min : 00 to Max : 64

Ack [u][ ][Set ID][ ][OK/NG][Data][x]

15. ISM Method (Command: j p) (Only Plasma TV)

► To control the ISM method. You can also adjust

ISM Method in OPTION menu.

Transmission [j][p][ ][Set ID][ ][Data][Cr]

Data Min : 02: Orbiter

08: Normal 20: Color(Colour) Wash

Ack [p][ ][Set ID][ ][OK/NG][Data][x]

16. Energy Saving (Command: j q)

► To reduce the power consumption of the TV. You

can also adjust Energy Saving in PICTURE menu.

Transmission [j][q][ ][Set ID][ ][Data][Cr]

Data 00 : Off 01 : Minimum 02 : Medium 03 : Maximum 04 : Auto 05 : Screen off

* (Depending on model)

Ack [q][ ][Set ID][ ][OK/NG][Data][x]

Ack [m][ ][Set ID][ ][OK/NG][Data][x]

* If you are not using the remote control, use this

mode. When main power is off & on (plug-off and plug-in, after 20 - 30 seconds), external control lock is released.

* In the standby mode (DC off by off timer or ‘ka’,

‘mc’ command), and if key lock is on, TV will not turn on by power on key of IR & Local Key.

13. Balance (Command: k t)

► To adjust balance.

You can also adjust balance in the AUDIO menu.

Transmission [k][t][ ][Set ID][ ][Data][Cr]

Data Min : 00 to Max : 64

Ack [t][ ][Set ID][ ][OK/NG][Data][x]

17. Tune Command (Command: m a)

* This command may work differently depending on

model and signal.

• For Europe, Mid-East, Colombia, Asia except

South Korea and Japan, Model

► Select channel to following physical number.

Transmission [m][a][ ][Set ID][ ][Data 00][ ]

[Data 01][ ][Data 02][Cr]

* Analogue Terrestrial/Cable

[Data 00][Data 01] Channel Data Data 00 : High byte channel data Data 01 : Low byte channel data

- 00 00 ~ 00 C7 (Decimal : 0 ~ 199)

Data 02 : Input Source (Analogue)

- 00 : Terrestrial TV (ATV)

- 80 : Cable TV (CATV)

Page 53

EXTERNAL CONTROL DEVICE SETUP

* Digital Terrestrial/Cable/Satellite

[Data 00][Data 01]: Channel Data Data 00 : High Channel data Data 01 : Low Channel data

- 00 00 ~ 27 0F (Decimal: 0 ~ 9999)

Data 02 : Input Source (Digital)

- 10 : Terrestrial TV (DTV)

- 20 : Terrestrial Radio (Radio)

- 40 : Satellite TV (SDTV)

- 50 : Satellite Radio (S-Radio)

- 90 : Cable TV (CADTV)

- a0 : Cable Radio (CA-Radio)

* Tune Command Examples:

1. Tune to the analogue terrestrial (PAL) Channel 10. Set ID = All = 00 Data 00 & 01 = Channel Data is 10 = 00 0a Data 02 = Analogue Terrestrial TV = 00 Result = ma 00 00 0a 00

2. Tune to the digital terrestrial (DVB-T) Channel 01. Set ID = All = 00 Data 00 & 01 = Channel Data is 1 = 00 01 Data 02 = Digital Terrestrial TV = 10 Result = ma 00 00 01 10

3. Tune to the satellite (DVB-S) Channel 1000. Set ID = All = 00 Data 00 & 01 = Channel Data is 1000 = 03 E8 Data 02 = Digital Satellite TV = 40 Result = ma 00 03 E8 40

Ack [a][ ][Set ID][ ][OK][Data 00][Data 01]

[Data 02][x][a][ ][Set ID][ ][NG][Data 00][x]

• For South Korea, North/Latin America except

Colombia Model

► To tune channel to following physical/major/minor

number.

Transmission [m][a][ ][0][ ][Data00][ ][Data01]

[ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]

Digital channels have a Physical, Major, and Minor channel number. The Physical number is the actual digital channel number, the Major is the number that the channel should be mapped to, and the Minor is the sub-channel. Since the ATSC tuner automatically maps the channel from the Major / Minor number, the Physical number is not required when sending a command in Digital.

* Analogue Terrestrial/Cable

Data 00 : Physical Channel Number

- Terrestrial (ATV) : 02~45 (Decimal: 2 ~ 69)

- Cable (CATV) : 01, 0E~7D (Decimal : 1, 14~125)

[Data 01 ~ 04]: Major/Minor Channel Number Data 01 & 02: xx (Don't care) Data 03 & 04: xx (Don't care)

Data 05: Input Source (Analogue)

- 00 : Terrestrial TV (ATV)

- 01 : Cable TV (CATV)

* Digital Terrestrial/Cable

Data 00 : xx (Don't care)

[Data 01][Data 02]: Major Channel Number Data 01 : High byte Channel Data Data 02 : Low byte Channel Data

- 00 01 ~ 27 0F (Decimal: 1 ~ 9999) [Data 03][Data 04]: Minor Channel Number Data 03 : High byte Channel Data Data 04 : Low byte Channel Data

Data 05 : Input Source (Digital)

- 02 : Terrestrial TV (DTV) – Use Physical Channel Number

- 06 : Cable TV (CADTV) – Use Physical Channel Number

- 22 : Terrestrial TV (DTV) – Don’t Use Physical Channel Number

- 26 : Cable TV (CADTV) - Don’t Use Physical Channel Number

- 46 : Cable TV (CADTV) – Use Major Channel Number Only (One Part Channel)

Two bytes are available for each major and minor channel data, but usually the low byte is used alone (high byte is 0).

* Tune Command Examples:

1. Tune to the analogue cable (NTSC) channel 35.

Set ID = All = 00 Data 00 = Channel Data is 35 = 23 Data 01 & 02 = No Major = 00 00 Data 03 & 04 = No Minor = 00 00 Data 05 = Analogue Cable TV = 01 Total = ma 00 23 00 00 00 00 01

2. Tune to the digital terrestrial (ATSC) channel 30-3.

Set ID = All = 00 Data 00 = Don’t know Physical = 00 Data 01 & 02 = Major is 30 = 00 1E Data 03 & 04 = Minor is 3 = 00 03 Data 05 = Digital Terrestrial TV = 22 Total = ma 00 00 00 1E 00 03 22

Ack [a][ ][Set ID][ ][OK][Data 00][Data 01]

[Data 02][Data 03][Data 04][Data 05]

[x][a][ ][Set ID][ ][NG][Data 00][x]

• For Japan Model

► To tune channel to following physical/major/minor

number.

Transmission [m][a][ ][0][ ][Data00][ ][Data01]

[ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]

* Digital Terrestrial/Satellite

Data 00: xx (Don't care)

ENGENGLISH

Page 54

EXTERNAL CONTROL DEVICE SETUP

ENGLISH

ENG

[Data 01][Data 02]: Major Channel Number Data 01: High byte Channel Data Data 02: Low byte Channel Data

- 00 01 ~ 27 0F (Decimal: 1 ~ 9999)

[Data 03][Data 04]: Minor/Branch Channel Number

(Don’t care in Satellite) Data 03: High byte Channel Data Data 04: Low byte Channel Data

Data 05 : Input Source (Digital/Satellite for Japan)

- 02 : Terrestrial TV (DTV)

- 07 : BS (Broadcasting Satellite)

- 08 : CS1 (Communication Satellite 1)

- 09 : CS2 (Communication Satellite 2)

* Tune Command Examples: 1

Tune to the digital terrestrial (ISDB-T) channel 17-1 Set ID = All = 00 Data 00 = Don’t know Physical = 00 Data 01 & 02 = Major is 17 = 00 11 Data 03 & 04 = Minor/Branch is 1 = 00 01 Data 05 = Digital Terrestrial TV = 02 Total = ma 00 00 00 11 00 01 02

2. Tune to the BS (ISDB-BS) channel 30.

Set ID = All = 00 Data 00 = Don’t know Physical = 00 Data 01 & 02 = Major is 30 = 00 1E Data 03 & 04 = Don’t Care = 00 00 Data 05 = Digital BS TV = 07 Total = ma 00 00 00 1E 00 00 07

* This feature is varied based on the model.

Ack [a][ ][Set ID][ ][OK][Data 00][Data 01]

[Data 02][Data 03][Data 04][Data 05]

[x][a][ ][Set ID][ ][NG][Data 00][x]

20. Control Back Light (Command: m g)

• For LCD TV / LED TV

► To control the back light.

Transmission [m][g][ ][Set ID][ ][Data][Cr]

Data Min : 00 to Max : 64

Ack [g][ ][Set ID][ ][OK/NG][Data][x]

Control Panel Light (Command: m g)

• For Plasma TV

► To control the panel light.

Transmission [m][g][ ][Set ID][ ][Data][Cr]

Data Min : 00 to Max : 64

Ack [g][ ][Set ID][ ][OK/NG][Data][x]

21. Input select (Command: x b) (Main Picture Input)

► To select input source for main picture.

Transmission [x][b][ ][Set ID][ ][Data][Cr]

Data 00 : DTV 02 : Satellite DTV

ISDB-BS (Japan) 03 : ISDB-CS1 (Japan) 04 : ISDB-CS2 (Japan) 11 : CATV

20 : AV or AV1 21 : AV2

01 : CADTV 10 : ATV

18. Channel(Programme) Add/Del(Skip) (Command: m b)

► To skip current channel(programme) for next time.

Transmission [m][b][ ][Set ID][ ][Data][Cr]

Data 00 : Del(ATSC,ISDB)/Skip(DVB) 01 : Add

Ack [b][ ][Set ID][ ][OK/NG][Data][x]

* Set the saved channel status to del(ATSC, ISDB)/

skip(DVB) or add.

19. Key (Command: m c)

► To send IR remote key code.

Transmission [m][c][ ][Set ID][ ][Data][Cr]

Data Key code - p.2.

Ack [c][ ][Set ID][ ][OK/NG][Data][x]

40 : Component1 41 : Component2

90 : HDMI1 92 : HDMI3

Ack [b][ ][Set ID][ ][OK/NG][Data][x]

* This function depends on model and signal.

91 : HDMI2 93 : HDMI4

Page 55

EXTERNAL CONTROL DEVICE SETUP

22. 3D(Command: x t) (only 3D models)

(Depending on model)

► To change 3D mode for TV.

Transmission [x][t][ ][Set ID][ ][Data 00][ ][Data 01]

[ ][Data 02][ ][Data 03][Cr]

Data Structure [Data 00] 00 : 3D On

01 : 3D Off 02 : 3D to 2D 03 : 2D to 3D

[Data 01] 00 : Top and Bottom

01 : Side by Side 02 : Check Board 03 : Frame Sequential 04 : Column interleaving 05 : Row interleaving

[Data 02] 00 : Right to Left

01 : Left to Right

[Data 03] 3D Effect(3D Depth): Min : 00 - Max : 14

(*transmit by Hexadecimal code)

* If [Data 00] is 00 (3D On), [Data 03] has no

meaning.

* If [Data 00] is 01 (3D off) or 02 (3D to 2D), [Data

01], [Data 02] and [Data 03] have no meaning.

* If [Data 00] is 03(2D to 3D), [Data 01] and [Data 02]

have no meaning.

* All 3D pattern options ([Data 01]) may not be

available according to broadcasting/video signal.

[Data 00] [Data 01] [Data 02] [Data 03]

00 O O X

01 X X X

02 X X X

03 X X O

X : don’t care

23. Extended 3D(Command: x v) (only 3D models) (Depending on model)

► To change 3D option for TV.

Transmission [x][v][ ][Set ID][ ][Data 00][ ]

[Data 01][Cr]

[Data 00] 3D option

00 : 3D Picture Correction 01 : 3D Depth (3D Mode is Manual Only) 02 : 3D Viewpoint 06 : 3D Color Correction 07 : 3D Sound Zooming 08 : Normal Image View 09 : 3D Mode (Genre)

[Data 01] It has own range for each 3D option

determined by [Data 00].

1) When [Data 00] is 00

00 : Right to Left 01 : Left to Right

2) When [Data 00] is 01, 02

Data Min: 0 - Max: 14 (*transmit by Hexadecimal

code) Data value range(0 - 20) converts Viewpoint range (-10 - +10) automatically (Depending on model)

3) When [Data 00] is 06, 07, 08

00 : Off

01 : On

4) When [Data 00] is 09

00 : Standard 02 : Cinema 04 : Manual

Ack [v][ ][Set ID][ ][OK][Data00][Data01][x]

[v][ ][Set ID][ ][NG][Data00][x]

01 : Sport 03 : Extreme

ENGENGLISH

Ack [t][ ][Set ID][ ][OK][Data00][Data01][Data02]

[Data03][x]

[t][ ][Set ID][ ][NG][Data00][x]

Page 56