TOSHIBA 47Z3030D, 42Z3030DG User Manual [fr]

TOSHIBA

Z3030

Series

Contents

SETTING UP

Safety precautions – Some do’s and don’ts for you to be aware of 4 Installation and important information 5 The remote control – an at-a-glance guide 6 Connecting external equipment – a guide to connecting external equipment to the back of the television 7 Connecting a computer – connecting a computer to the back of the television 8 Connecting REGZA-LINK – connecting Toshiba REGZA-LINK equipment 9 Controls and input connections – switching on the television, standby, using the controls on the television,

headphone socket, connecting equipment to the side input sockets 10

TUNING THE TELEVISION

DIGITAL – tuning the television for the first time 11

DIGITAL – auto tuning, analogue switch off 12 DIGITAL – programme sorting, manual tuning 13

ANALOGUE – tuning analogue mode for the first time, language, country 14

ANALOGUE – manual tune, broadcast system 15 ANALOGUE – auto tune 16 ANALOGUE – programme skip, sorting programme positions 17

CONTROLS AND FEATURES

General controls – changing programme position 18 Stereo and bilingual transmissions – stereo/mono or dual language broadcasts 18 Time display (analogue only) 18 Sound controls – volume, sound mute, bass/treble/balance 18 Sound controls – bass boost, super woofer, dual (analogue only), stable sound SRS WOW Widescreen viewing 20 Picture controls – picture position (analogue only), back light 22 Picture controls – picture preferences (contrast, brightness, colour, tint, sharpness), black stretch,

Picture controls – active backlight control, cinema mode, film stabilization, Active Vision M100,

Picture controls – 3D colour management, base colour adjustment, antenna amplifier 25 Picture controls – automatic format (widescreen), 4:3 stretch, blue screen, side panel adjustment, picture still 26 Panel lock – disabling the buttons on the television 26

DIGITAL – programme timer 27

Sleep timer 27

DIGITAL – on-screen information and programme guide 28 DIGITAL settings – parental controls (setting the PIN, mode) 29 DIGITAL settings – favourite programmes, locked programmes, encrypted programmes 30 DIGITAL settings – audio languages, audio output, subtitles, reset TV, common interface 31 DIGITAL settings – software upgrade (version, automatic upgrade, searching for new software) 32

PC settings – picture position, clock phase, sampling clock, reset, PC media window 33 REGZA-LINK controls – general information, input source selection 34 REGZA-LINK menus – enable REGZA-LINK 35 REGZA-LINK menus – TV auto input switch, TV auto power, auto standby, speaker preference 36 Input selection and AV connections – input and output sockets for connected equipment, HDMI setting 37

TEXT SERVICES

ANALOGUE text – setting up, general information, Auto. and LIST modes 39 ANALOGUE text – control buttons 40

PROBLEM SOLVING

Questions and Answers – answers to some of the more common queries including

INFORMATION

Notes – for your own records 44 Information – signal information 45 Specifications and Accessories – technical information about the television, supplied accessories 46

sound effects – SRS 3D, FOCUS and TruBass 19

MPEG noise reduction (MPEG NR), digital noise reduction (DNR), colour temperature 23

xvYCC selection (HDMI only) 24

manual fine tuning and colour system 41

English

Safety Precautions

English

This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety. They are of a general nature, intended to help with all electronic consumer products and some points may not apply to the goods you have just purchased.

Air Circulation

Leave more than 10cm clearance around the television to allow adequate ventilation. This will prevent overheating and possible damage to the television. Dusty places should also be avoided.

Heat Damage

Damage may occur if the television is left in direct sunlight or near a heater. Avoid places subject to extremely high temperatures or humidity. Place in a location where the temperature remains between 5°C (41°F) min. and 35°C (94°F) max.

Mains Supply

The mains supply required for this equipment is 220-240v AC 50/60Hz. Never connect to a DC supply or any other power source. DO ensure that the television is not standing on the mains lead. DO NOT cut off the mains plug from this equipment, this incorporates a special Radio Interference Filter, the removal of which will impair its performance.

IF IN DOUBT PLEASE CONSULT A COMPETENT ELECTRICIAN.

DO read the operating instructions before you attempt to use the equipment.

DO ensure that all electrical connections (including the mains plug, extension leads and inter-connections between pieces of equipment) are properly made and in accordance with the manufacturers’ instructions. Switch off and withdraw the mains plug before making or changing connections.

DO consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.

DO be careful with glass panels or doors on equipment.

DO NOT REMOVE ANY FIXED COVERS AS THIS WILL EXPOSE DANGEROUS AND 'LIVE' PARTS.

THE MAINS PLUG IS USED AS A DISCONNECTING DEVICE AND THEREFORE SHOULD BE READILY OPERABLE.

Do not

DO NOT obstruct the ventilation openings of the equipment with items such as newspapers, tablecloths, curtains, etc. Overheating will cause damage and shorten the life of the equipment.

DO NOT allow electrical equipment to be exposed to dripping or splashing or objects filled with liquids, such as vases, to be placed on the equipment.

DO NOT place hot objects or naked flame sources, such as lighted candles or nightlights on, or close to equipment. High temperatures can melt plastic and lead to fires.

DO NOT use makeshift stands and NEVER fix legs with wood screws. To ensure complete safety, always fit the manufacturers’ approved stand, bracket or legs with the fixings provided according to the instructions.

DO NOT leave equipment switched on when it is unattended, unless it is specifically stated that it is designed for unattended operation or has a standby mode. Switch off by withdrawing the plug, make sure your family know how to do this. Special arrangements may need to be made for people with disabilities.

DO NOT continue to operate the equipment if you are in any doubt about it working normally, or it is damaged in any way – switch off, withdraw the mains plug and consult your dealer.

WARNING – excessive sound pressure from earphones or headphones can cause hearing loss.

ABOVE ALL – NEVER let anyone, especially children, push or hit the screen, push anything into holes, slots or any other openings in the case.

NEVER guess or take chances with electrical equipment of any kind – it is better to be safe than sorry.

Installation and important information

Where to install

Locate the television away from direct sunlight and strong lights, soft, indirect lighting is recommended for comfortable viewing. Use curtains or blinds to prevent direct sunlight falling on the screen.

Place on a sturdy platform, the mounting surface should be flat and steady. It should then be secured to the wall with a sturdy tie using the clip on the back of the stand, or secured to the platform using the fixing strap located underneath the table top stand, this will prevent it from falling over.

The LCD display panels are manufactured using an extremely high level of precision technology, however sometimes some parts of the screen may be missing picture elements or have luminous spots. This is not a sign of a malfunction.

Make sure the television is located in a position where it cannot be pushed or hit by objects, as pressure will break or damage the screen, and that small items cannot be inserted into slots or openings in the case.

Side View Top View

Clip

Please take note

The digital reception function of this television is only effective in the countries listed in the "COUNTRY SET UP" section of the "DIGITAL MENU". Depending on country/area some of this television’s functions may not be available. Reception of future additional or modified services can not be guaranteed with this television.

If stationary images generated by 4:3 broadcasts, text services, channel identification logos, computer displays, video games, on screen menus, etc. are left on the television screen for any length of time they could become conspicuous, it is always advisable to reduce both the brightness and contrast settings.

Sturdy tie

(as short as possible)

Clip

English

EXCLUSION CLAUSE

Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by: i) fire; ii) earthquake; iii) accidental damage; iv) intentional misuse of the product; v) use of the product in improper conditions; vi) loss and/or damage caused to the product whilst in the possession of a third party; vii) any damage or loss caused as a result of the owner’s failure and/or neglect to follow the instructions set out in the owner’s

manual;

viii) any loss or damage caused directly as a result of misuse or malfunction of the product when used simultaneously with

associated equipment;

Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or damage including but not limited to the following, loss of profit, interruption of business, the loss of recorded data whether caused during normal operation or misuse of the product.

NOTE: A Toshiba wall bracket or stand, where available, must be used. If a non Toshiba wall bracket or stand is used the product’s BEAB approval will become void and the equipment is then used at the consumers own risk.

The remote control

English

Simple at-a-glance reference of your remote control.

To select mode

Number buttons

To return to the previous programme

To switch between ATV (analogue

television) and DTV (digital television)

To alter the volume

On-screen Menus

To display the digital on-screen

REGZA-LINK or DVD mode:

press

to PLAY

press

to EJECT

press

to STOP

press

Programme Guide

Text control buttons

Selectable picture preferences

Widescreen viewing

to PAUSE/STEP

to REWIND to FAST FORWARD

to SKIP-REWIND to SKIP-FORWARD

For On/Standby mode

To select input from external sources, analogue or

To change programme positions and text pages

To mute the sound

To exit Menus

When using menus the arrows move the cursor on the screen up, down, left or right. OK to confirm your selection

To switch between TV, Radio and Favourite programmes when in digital mode

To display digital on-screen information

To call up text services in analogue mode

When in TV mode:

u Still picture

OI/II

SUBTITLE Digital Subtitles

8/9

When using the Programme Guide:

q s q s

digital

TV.

Stereo/bilingual transmissions

Analogue time display

– 24 hours + 24 hours

– 1 page + 1 page

Inserting batteries and effective range of the remote

Remove the back cover to reveal the battery compartment and make sure the batteries are inserted the right way round. Suitable battery types for this remote are AAA, IEC R03 1.5V.

Do not combine a used, old battery with a new one or mix battery types. Remove dead batteries immediately to prevent acid from leaking into the battery compartment. Dispose of them in a designated disposal area. Warning: batteries must not be exposed to excessive heat such as sunshine, fire or the like.

The performance of the remote control will deteriorate beyond a distance of five metres or outside an angle of 30 degrees from the centre of the television. If the operating range becomes reduced the batteries may need replacing.

Connecting external equipment

Before connecting any external equipment, turn off all main power switches. If there is no switch remove the mains plug from the wall socket.

COMPONENT VIDEO (EXT3)

SCART 2 (EXT2)

English

SCART 1 (EXT1)



a decoder could

be Digital Satellite or any other

compatible decoder.

decoder*

media recorder

Aerial cables:

Connect the aerial to the socket on the rear of the television. If you use a decoder* and/or a media recorder it is essential that the aerial cable is connected through the decoder and/or through the media recorder to the television.

SCART leads:

Connect the video recorder IN/OUT socket to the television. Connect the decoder TV socket to the television. Connect the media recorder SAT socket to the decoder MEDIA REC. socket.

Before running Auto tuning put your decoder and media recorder to Standby.

The phono sockets alongside the COMPONENT VIDEO INPUT sockets will accept L and R audio signals.

The Digital Audio Output socket enables the connection of a suitable surround sound system. NOTE: this output is

always active.

In addition there is a fixed external audio ouput which enables the connection of a suitable Hi-Fi unit. Make sure the Speaker option in the Sound menu is set to Off.

HDMI™ (High-Definition Multimedia Interface) is for use with a DVD, decoder or electrical equipment with digital audio and video output.

REGZA-LINK will only work through HDMI when using other Toshiba equipment with REGZA-LINK capability.

IN/OUT

MEDIA REC.

SAT

CABLE HOLDER



The cable holder

can be used for aerial,

media recorder and audio cables. Do not use as a handle and

remove all cables

FIXING STRAP

DIGITAL AUDIO

OUTPUT

(DTV MODE ONLY)

This television supports HDMI (Deep Color™) when applied through an HDMI input.

NOTE: It is recommended that an HDMI cable with the HDMI logo ( ) is used. When connecting other equipment to this television if the connection is capable of 1080p and/or supports Deep Color™ a Category 2 cable will be required. Conventional HDMI/DVI cable may not work properly with this mode. It is recommended that DVI cable or DVI/HDMI adapter with cable is less than 2m long.

PLEASE NOTE: Although this television is able to connect to HDMI equipment it is possible that some equipment may not operate correctly.

A wide variety of external equipment can be connected to the back of the television, therefore the relevant owners manuals for all additional equipment must be referred to.

We recommend SCART 1 for a decoder and SCART 2 for a media recorder. If connecting S-VIDEO equipment, set the INPUT for EXT2. See page 37.

If the television automatically switches over to monitor external equipment, return to normal television by pressing the desired programme position button. To recall external equipment, press EXT3C, HDMI1, HDMI2, HDMI3, PC or ATV.

HDMI, the HDMI logo, High-Definition Multimedia Interface and Deep Color are trademarks or registered trademarks of HDMI Licensing, LLC.

COMMON INTERFACE

The Common Interface is for a

Conditional Access Module (CAM).

Contact a service provider.

to select between DTV, EXT1, EXT2,

before moving the

television.

HDMI™ INPUT

SOCKETS

Connecting a computer

English

Before connecting any external equipment, turn off all main power switches. If there is no switch remove the mains plug from the wall socket.

the back of your television

Audio cable for PC to

television connection

(not supplied)

Computer

Mini D-sub

15 pin connector

RGB PC cable

(not supplied)

Conversion adaptor if required (not supplied)

Connect the PC cable from the computer to the PC terminal on the back of the television.

Connect the audio cable to the PC/HDMI1 Audio socket on the back of the television. Select PC from the PC/HDMI1 audio options in the AV connection menu located in the SET UP menu.

Press the Bto select PC mode.

PLEASE NOTE:

Some PC models cannot be connected to this television.

An adaptor is not needed for computers with a DOS/V compatible mini D-sub 15 pin terminal.

A band may appear at the edges of the screen or parts of the picture may be obscured. This is due to scaling of the picture by the set, it is not a malfunction.

When PC input mode is selected some of the television’s features will be unavailable e.g. Manual

setting in the SET UP menu, Colour, Tint, DNR and Black Stretch in the Picture settings menu.

The following signals can be displayed:

VGA: 640 x 480/60 Hz (VESA) VGA: 640 x 480/75 Hz (VESA) SVGA: 800 x 600/60 Hz (VESA) SVGA: 800 x 600/75 Hz (VESA) XGA: 1024 x 768/60 Hz (VESA) XGA: 1024 x 768/70 Hz (VESA) XGA: 1024 x 768/75 Hz (VESA) WXGA: 1280 x 768/60 Hz (VESA) WXGA: 1280 x 768/60 Hz (VESA) – Reduced Blanking WXGA: 1280 x 768/75 Hz (VESA) WXGA: 1360 x 768/60Hz (VESA) SXGA: 1280 x 1024/60 Hz (VESA) SXGA: 1280 x 1024/75 Hz (VESA)

IMPORTANT NOTE: Some PCs when connected they may not display correctly.

When connecting a PC using HDMI the following signals can be accepted (see page 21):

1080i 50/60Hz 1080p 50/60Hz 720p 50/60Hz

HDMI IN HDMI OUT

HDMI OUT

Connecting REGZA-LINK

The basic functions of connected audio/video equipment can be controlled using the televisions remote control if a REGZA-LINK compatible device is connected.

the back of your television

Playback equipmentAV amplifier

English

Playback equipment

NOTE: It is recommended that for correct operation all audio/video devices are connected using HDMI cables branded with the HDMI logo ( ). If several devices are connected, the REGZA-LINK feature may not operate properly.

After connecting the equipment use the REGZA-LINK menus to setup the desired options. The connected equipment must also be set. For details see the operation manual for each connected device.

NOTE: The REGZA-LINK feature uses CEC Technology as regulated by the HDMI standard. This feature is limited to models incorporating Toshiba’s REGZA-LINK. However, Toshiba is not liable for those operations. Refer to individual instruction manuals for compatability information.

Controls and input connections

English

A wide variety of external equipment can be connected to the input sockets on the side of the television.

Whilst all the necessary adjustments and controls for the television are made using the remote control, the buttons on the television may be used for some functions.

RED LED – Standby GREEN LED – Power on

GREEN LED – Active standby (digital only) GREEN LED – Timer (analogue only) (LED 2)



Input 3

(side) will take priority over EXT3 (back) if

both connections

are used at the

same time.

(LED 1)

Switching on

If the RED LED is unlit check that the mains plug is connected to the power supply. If the picture does not appear press ion the remote control, it may take a few moments.

To put the television into Standby press ion the remote control, the GREEN active standby LED will appear (see ‘Software Upgrade’ section) next to the RED for a few moments then disappear. To view the television press again. The picture may take a few seconds to appear.

Using the remote control

Press the MENU button on the remote control to see the menus.

In digital mode the menu bar at the top of the screens will show three different topics shown in symbols. As each symbol is selected by pressing the zorxbutton on the remote control, its respective options will appear below.

In analogue mode the menu appears as a list of five topics. As each symbol is selected by pressing the zor button on the remote control, its respective options will appear below.

Standby

HDMI3

INPUT

INPUT 3

(EXT3)

To use the options press the remote control to move up and down through them and OK, zorxto select the required choice. Follow the on screen instructions. The functions of each menu are described in detail throughout the manual.

andebutton on the

Using the controls and connections

To alter the volume press — j +.

To alter the programme position press

Press MENU and S,R, Q or P to control the sound and picture options.

Press MENU twice to finish.

When connecting sound equipment to EXT3, connect the audio output of the equipment to the phono sockets on the television.

To select the Input, press Buntil the display shows EXT3 as described on page 37. The television will automatically sense the type of signal.

Please always refer to the owner’s manual of the equipment to be connected for full details.

Please note: Inserting the headphone plug will mute the

sound from all speakers.

eeFff

Tuning Digital television for the first time

Before switching on the television put your decoder and media recorder to Standby if they are connected and ensure the aerial is connected. To set up the television use the buttons on the remote control as detailed on page 6.

English

Press the ibutton, the LOCAL OPTIONS screen

will appear. This screen will appear the first time that the television is switched on and each time the television is reset.

Country UK

Language ENGLISH

Audio Language ENGLISH

Audio output PCM

Subtitles OFF

Local Time Settings 0

Press

select. The television will now tune the stations for

LOCAL OPTIONS

Continue

to highlight Country and zorxto

your country.

Using ehighlight Language, then zorxto

select.

Press OK to start tuning.

The DTV AUTO TUNING screen will appear and the television will start to search for available stations. The progress bar will move along the line.

You must allow the television to complete

the search.

When the search is complete the television will automatically select programme one.

The DTV AUTO TUNING screen will display the total number of services found.

DTV AUTO TUNING

85 programmes found

58 TV 27 Radio

Press OK to watch programme

Prog. Name

1 BBC ONE 34 GOOD

2 BBC TWO 34 GOOD

3 ITV1 31 GOOD

4 Channel 4 31 POOR

5 Five 48 GOOD

6 ITV2 31 POOR

Change Watch

Page Up Page Down Sort

Use eorfto move through the list to select a

programme then press OK to view.

Type V/UHF Quality

NOTE: The time will be set automatically by transmission but can be advanced or decreased by up to 3 hours using Local Time Settings.

DTV AUTO TUNING

Progress

Prog. Name Type V/UHF Quality

70 CBBC Channel 34 GOOD

87 Community 21 POOR

EXIT

Cancel

Digital auto tuning

English

NOTE: As new services are broadcast it will be necessary to re-tune the television in order to view them.

Auto tuning

Auto tuning will completely re-tune the television and

can be used to up date the channel list.

It is recommended that Auto tuning is run

periodically to ensure that all new services are

added. All current programmes and settings, i.e.

favourites and locked programmes, will be lost.

Press MENU, the SETUP MENU will appear.

Use eto highlight Auto tuning. Press OK.

A screen will appear warning that previous

digital programmes and settings will be deleted. Press OK to continue with the Auto tuning.

WARNING

! All previous digital programmes and

settings will be deleted. Continue?

YES

Select

The television will start to search for all available stations.

Progress

Prog. Name Type V/UHF Quality

70 CBBC Channel 34 GOOD

87 Community 21 POOR

Cancel

AUTO TUNING

You must allow the television to complete the search.

When the search is complete the Auto tuning screen will display the total number of services found.

AUTO TUNING

85 programmes found

58 TV 27 Radio

Press OK to watch programme

Prog. Name

1 BBC ONE 34 GOOD

2 BBC TWO 34 GOOD

3 ITV1 31 GOOD

4 Channel 4 31 POOR

5 Five 48 GOOD

6 ITV2 31 POOR

Change Watch

Page Up Page Down Sort

Use eorfto move through the list to select a

programme then press OK to view.

Type V/UHF Quality

Back

Analogue switch-off

This is a digital television which is integrated to allow the use of both digital and analogue services. However, during the lifetime of this set it is very likely that analogue services will be switched off to allow for more new digital services.

This ‘switch-off’ will happen in a number of phases, which will be advertised in your area well in advance. It is recommended that at each phase the television is re-tuned to ensure that existing and new digital services can be viewed without disruption (see the 'Auto tuning' section).

EXIT

Cancel

Digital programme sorting,

manual tuning

NOTE: When the television is switched off the mode being viewed at the time will automatically be selected when the television is switched back on.

Use eorfto move through the list to your

Programme sorting

The station order may be changed to suit

personal preference. Press MENU, the SETUP MENU will appear on screen.

Use eto move down through the list and

highlight Programmes. Press OK.

SETUP MENU

TV Setup OK

Local Options OK

Auto tuning OK

Manual tuning OK

Programmes OK

Back

EXIT

Watch TV

With the list of stations now showing use eor

to highlight the station you want to move and

press x.

The selected station will be moved to the right of the screen.

preferred position. As you do so the other stations will move to make room.

Press zto store your move. Repeat as

necessary, then press EXIT.

Manual tuning

This feature is available for service engineers or can be

used for direct channel entry if the multiplex channel

Select Manual tuning from the SETUP MENU

and press OK.

Enter the multiplex number using the number

buttons and then press OK. The television will automatically search for that multiplex.

When the multiplex is found any channels not currently on the programme list will be added and the programme information at the top of the screen will be updated.

Repeat as necessary. Press EXIT to finish.

is known.

English

Prog. Name

1 BBC ONE

2 BBC TWO

3 ITV1

4 Channel 4

5 Five

6 ITV2

PROGRAMMES

Sort Store

Page Up Page Down

Back

EXIT

Watch TV

Tuning Analogue mode for the first time

English

The Quick Setup feature will tune all analogue channels currently available in the area. To put the television into ATV mode press the A/D button.

Select ATV mode. The Quick Setup screen will

appear.

Quick Setup

Select your language.

Language English

EXIT

Watch TV

Using zorxselect your language, then press

OK.

Then press zorxto select your country.

To start Auto tuning press OK.

Searching

Channel : C22 Station : BBC1

EXIT

Stop

The search will begin for all available stations.

The slide bar will move along the line as the

Auto tuning

search progresses.

You must allow the television to complete

the search.

Prog. Channel Station

Select Sort

Use

eorf

programme then press EXIT to view.

Manual tuning

1 C22 BBC1

2 C28 BBC2

3 C25 ITV

4 C32 CH4

5 C68

6 C69

Back

EXIT

Watch TV

to move through the list to select a

The station order may be changed using the

Manual tuning screen (see the analogue ‘Sorting programme positions’ section).

When the search is complete the television will automatically select programme position 1 and the Manual tuning screen will appear.

Analogue manual tune

The television can be tuned-in manually using Manual tuning. For example: if the television cannot be connected to a media recorder/decoder with a SCART lead or to tune-in a station on another System.

Use zandxto move across the screen and select any of these Manual Tune options.

English

Programme System

Colour system

Programme

skip

Channel Search

Manual fine

tuning

Station

Programme: The number to be pressed on the remote control.

System: Specific to certain areas.

Colour system: Factory set to Auto, should only be changed if problems are experienced, i.e. NTSC input from

external source.

Programme skip: means nothing has been stored or the facility to skip the channel is ON. See page 17.

Channel: The channel number on which a station is being broadcast.

Search: Search up and down for a signal.

Manual fine tuning: Only used if interference/weak signal is experienced. See page 41.

Station: Station identification. Use the

or eand zorxbuttons to enter up to seven characters.

To allocate a programme position on the television for a decoder and media recorder: turn the decoder on,

insert a pre-recorded film in the media recorder and press PLAY, then manually tune.

Press MENU and using

menu, with ehighlight Manual tuning, press OK to select.

Language English

Country UK

Auto tuning

Manual tuning

Antenna Amplifier On

AV connection

Back

Use foreto highlight the programme position

required e.g. we suggest Prog. 0 for a media recorder.

Prog. Channel Station

0 C60

1 C22 BBC1

2 C28 BBC2

3 C25 ITV

4 C32 CH4

5 C69

Select Sort

Back

or xselect the SET UP

SET UP

EXIT

Watch TV

Manual tuning

EXIT

Watch TV

Press OK to select. If the programme is skipped,

Programme skip must be removed before

storing.

Manual tuning

1/2

Different

Channel

numbers may be displayed

0 I A C 60 0

Store

Back

Press xto select System and use foreto

change if required.

Then press xto select Search.

Press foreto begin the search. The search

symbol will flash.

0 I A C 60 0

Store

Back

Each signal will show on the television, if it is not

your media recorder, press foreagain to restart the search.

System

EXIT

Watc h TV

Manual tuning

Search: Up

EXIT

Watc h TV

Analogue manual tune continued,

English

When your media recorder signal is found, press

to move along to Station. With f, e, zand

put in the required characters, e.g. VCR.

Manual tuning

EXIT

Manual setting

Back

Station

Watch TV

Label

EXIT

Watch TV

0 I A C 60 0 V C R

Store

Back

Press OK to store.

Repeat for each programme position you want

to tune or, press MENU to return to the list of channels and select the next number to tune.

Press EXIT when you have finished.

To name external equipment, e.g. DVD on EXT2,

press Bto select B2, then select Manual setting from the SET UP menu.

Press xto select Label then using f, e, zand

put in the required characters. Press OK.

EXT2 A D V D

Store

PLEASE

Select the Manual tuning screen in Step 3. Enter the Programme number, the System, then C for

standard (terrestrial) channels or S for cable channels and the Channel number. Press OK to store.

This television has direct channel entry

NOTE

if the channel numbers are known.

Auto tune

Using Auto tuning

To set up the television using Auto tuning, press

MENU and use zorxto select the SET UP

menu.

Language English

Country UK

Auto tuning

Manual tuning

Antenna Amplifier On

AV connection

Back

Press eto highlight Language and zorxto

select.

Using ehighlight Country, then zorxto select.

The television will now tune the stations for your country.

Press

to highlight Auto tuning, then press OK.

Previous settings will be lost ! Press EXIT for no change. Press OK to start Auto tune.

Back

To start Auto tuning press OK.

SET UP

EXIT

Watch TV

Auto tuning

EXIT

Watch TV

1/2

You must allow the television to complete the search.

When the search is complete the television will automatically select programme position 1. This may not be a clear picture, so the station order can be changed (see 'Sorting programme positions' section).

Analogue programme skip, sorting programme positions

English

Programme skip

To prevent certain programmes from being viewed, the

programme position can be skipped. The remote control

must be removed as the channels will still be available using

the number buttons

normal using the controls on the television, but the television

will not show the skipped programme position.

Select Manual tuning from the SET UP menu.

Use foreto highlight the programme position

to be skipped and press OK to select.

Press xto select Programme skip.

Use foreto turn Programme skip on.

Press OK.

programme position.

. Programmes can then be watched as

Prog. Channel Station

Select Sort

Manual tuning

1 C22 BBC1

2 C28 BBC2

3 C25 ITV

4 C32 CH4

5 C68

6 C69

Back

EXIT

Watch TV

on the screen indicates a skipped

Manual tuning

Back

Programme skip : On

EXIT

Watch TV

1 I A C 22 0 B B C 1

Store

Sorting programme positions

Channels may be moved and stored on the programme

position of your choice.

Select Manual tuning from the SET UP menu.

With the list of stations now showing use

eorf

to highlight the station you want to move and press x.

The selected station will be moved to the right of the screen.

Prog. Channel Station

Store

Manual tuning

1 C22 BBC1

2 C28 BBC2

3 C25 ITV

4 C32 CH4

5 C68

6 C69

Back

EXIT

Watch TV

Use eorfto move through the list to your preferred position. As you do so the other stations will move to make room.

Press zto store your move.

Repeat as necessary, then press EXIT.

Press MENU and repeat from Step 2 or press

EXIT.

Each programme position has to be individually selected. To turn Programme skip off, repeat the procedure for each position.

Skipped programme positions cannot be selected by P P and P Q or by the controls on the television, but can still be accessed by the number buttons on the remote control.

General controls, stereo/bilingual

transmissions, time display, sound controls

English

Selecting programme positions

To select a programme position use the numbered buttons on the remote control.

Programme positions can also be selected using P P and P Q.

To revert to the previous programme position press

To display on-screen information i.e. programme position, channels or stereo/mono signal, press . Press again to cancel.

Stereo and Bilingual transmissions

If stereo or dual language broadcasts are transmitted the word Stereo or Dual will appear on the screen each time

programme positions are changed, disappearing after a

few seconds. If the broadcast is not in stereo the word

Stereo… Press

Bilingual… Bilingual transmissions are rare. If they are

transmitted the word Dual will display. Choose the required programme number and if the word Dual

appears press OI/II to select Dual 1, Dual 2 or Mono.

Mono will appear.

OI/II to select Stereo or Mono.

The Time Display – analogue only

The time display facility allows the current (text service)

time to be seen on the television screen.

Press broadcast to see a time display from the broadcaster. It will remain on screen for about 5 seconds.

whilst watching a normal television

8/9

Sound controls

Bass, Treble and Balance

The sound controls are accessible in digital and

analogue modes, as are most of the televisions features.

In digital mode, press MENU and using

highlight TV setup then press OK.

Use zorxto select SOUND.

In analogue mode, press MENU and zorxto

select SOUND.

Dual Dual 1

Bass 0

Treble 0

Balance 0

WOW

Stable sound Off

Back

Press eto highlight Bass, Treble or Balance

and zorxto change the setting.

SOUND

EXIT

Watch TV

1/2

Bass boost

Bass boost enhances the depth of the sound on the TV

speakers. The difference will only be noticeable on sound

In the SOUND menu press eto highlight Bass

boost. Use zorxto select On.

Then press eto highlight Bass boost level and

using zorxadjust to suit your preference.

with a strong bass.

Volume

Press j— or

+ to adjust the volume.

Sound Mute

Press konce to turn the sound off and again to cancel.

Bass boost On

Bass boost level 70

Back

SOUND

EXIT

Watch TV

2/2

Sound controls continued, SRS WOW

effects, dual, stable sound

Super Woofer

To use an external Super Woofer connect it to the Woofer

Out connection on the back of the television.

Select AV connection in the SET UP menu.

Press eto highlight Woofer and using zor

select External.

AV connection

Woofer External

If a programme or film is being broadcast with a

soundtrack in more than one language, the DUAL feature

sound

Press eto highlight SRS 3D and using

select between On or Off.

zorx

Then press eto highlight FOCUS and press

to select between On or Off.

zorx

Highlight TruBass and use zorxto select Off, Low or High to suit your preference.

NOTE: This feature is not available through

headphones.

Dual – analogue only

allows selection between them.

English

Back

EXIT

Watch TV

SRS WOW®sound effects

SRS WOW®is a suite of audio effects which use the stereo

signals being broadcast to produce enhanced sound from the television’s speakers. If mono sound is broadcast only

SRS 3D gives a rich sound experience, FOCUS

concentrates the sound and gives the effect of it coming from the centre of the television, TruBass enhances the

TruBass will be available.

lower bass frequencies.

Press MENU and select the SOUND menu.

Use foreto highlight WOW then press OK.

WOW

SRS 3D On

FOCUS Off

TruBass Off

Back

EXIT

Watch TV

Select the SOUND menu.

Use eto highlight Dual then press zorxto

choose between Dual 1 or Dual 2.

Stable sound

The Stable Sound feature limits high volume levels on the

TV speakers, preventing the extreme changes in volume

that can occur when channels are changed or a

programme switches to a commercial.

Select the SOUND menu.

Use eto highlight Stable sound then press

to select On or Off.

zorx

WOW, SRS and •symbol are trademarks of SRS Labs, Inc. WOW technology is incorporated under license from SRS Labs, Inc.



Widescreen viewing

English

Depending on the type of broadcast being transmitted, programmes can be viewed in a number of formats. Press the Super Live 1, Cinema 1, Subtitle and 14:9.

SUPER LIVE 1

SUPER LIVE 2

CINEMA 1

button repeatedly to select between Exact scan, PC, Wide, Super Live 2, Cinema 2, 4:3,

{

This setting will enlarge a 4:3 image to

fit the screen by stretching the image

horizontally and vertically, holding

better proportions at the centre of the

image. Some distortion may occur.

If a ‘side panel format’ signal is being

received this setting will enlarge the image to fit the screen by stretching

the image horizontally and vertically,

holding better proportions at the

centre of the image. Some distortion

eliminate or reduce the black bars at

the top and bottom of the screen by zooming in and selecting the image

may occur.

When watching ‘letterbox format’

films/video tapes, this setting will

without distortion.

CINEMA 2

SUBTITLE

When watching ‘all sides panel format’

films/video tapes, this setting will

eliminate or reduce the black bars at all

sides of the screen by zooming in and selecting the image without distortion.

When subtitles are included on a

letterbox format broadcast, this setting

will raise the picture to ensure that all

the text is displayed.

SUBTITLE

Widescreen viewing continued

English

14:9

WIDE

4:3

FULL HD MODELS

EXACT SCAN

Use this setting when watching a 14:9

Use this setting when watching a

widescreen DVD, widescreen video

(when available). Due to the range of

20:9 etc.) black bars may be visible

on the top and bottom of the screen.

Use this setting to view a true 4:3

Use this setting when watching a

1080 source, it will display the image

as transmitted without scaling or

broadcast.

tape or a 16:9 broadcast

widescreen formats (16:9, 14:9,

broadcast.



available when watching a 1080 source.

cropping the picture.

This option is only

When using a PC connected via

Press the {button and a list of all the widescreen formats will appear on screen. Use fand eto highlight the required format and OK to select.

When a PC is connected via HDMI it will be selectable in the widescreen format list.

Using the special functions to change the size of the displayed image (i.e. changing the height/width ratio) for the purposes of public display or commercial gain may infringe on copyright laws.

HDMI this setting will show the picture

without over scan, i.e. WYSIWYG.

Exact Scan

Wide

Super Live 2

Cinema 2

4:3

Super Live 1

Cinema 1

Subtitle

14:9

English

Picture controls

Most of the picture controls and functions are available in both digital and analogue modes. To access the required menus when in digital mode: press MENU and using

eselect TV setup, press OK then

zorx

to select the desired menu. PLEASE NOTE: features not available in digital mode will be greyed out. To access the required menus when in analogue mode: press MENU and use

Picture position – analogue only

The picture position may be adjusted to suit personal

preference and can be particularly useful for

In the SET UP menu press

Picture position is highlighted.

Picture position

Quick Setup

Press OK to view the options available for the

picture format that has been selected.

Press fand eto select an option, then zor

to adjust the settings.

The options alter depending on the widescreen format chosen and when viewing connected equipment.

In Cinema 2:

Horizontal position 0

Vertical position 0

Reset

Back

external inputs.

SET UP

EXIT

Watch TV

Picture position

until

2/2

Adjusting the Backlight can improve the clarity of the

to select the desired menu.

zorx

Backlight

screen when viewing.

In the PICTURE menu press eto select Picture settings, then press OK.

Picture settings

Active Backlight Control

Cinema mode

Film Stabilization

Active Vision M100 On

xvYCC selection

Back

In the Picture settings menu press eto select Backlight.

Press zorxto adjust.

Backlight 100

Contrast 100

Brightness 50

Colour 50

Tint 0

Sharpness 0

Back

PICTURE

EXIT

Watch TV

Picture settings

EXIT

Watch TV

Off

1/2

Back

EXIT

Watch TV

To return to the original factory settings select Reset in the Picture position menu and press OK.

Picture controls

continued

English

Picture preferences

This television offers the choice of personalising the picture

style. Press mto view the different styles available:

Dynamic, Standard and Movie are preset options and

effect many features/settings within the television, User

settings stores your own settings as detailed below:

Select Picture settings from the PICTURE menu.

Picture settings

Backlight 100

Contrast 100

Brightness 50

Colour 50

Tint 0

Sharpness 0

Back

Use

zorx

Colour, Tint and Sharpness.

EXIT

Watch TV

to adjust the Contrast, Brightness,

1/2

Black stretch

Black Stretch increases the strength of dark areas of the

picture which improves the definition.

In the Picture settings menu press euntil Black

Stretch is highlighted.

Picture settings

Black stretch High

MPEG NR Low

DNR Auto.

Colour Temperature Cool

Back

EXIT

Watch TV

2/2

MPEG NR – Noise Reduction

When watching a DVD the compression may cause some

words or picture elements to become distorted or pixelated.

Using the MPEG NR feature reduces this effect by

smoothing out the edges.

Select MPEG NR from the Picture settings menu.

Use zorxto select a setting to suit your preference.

DNR – Digital Noise Reduction

DNR enables you to ‘soften’ the screen representation of a

weak signal to reduce the noise effect.

Select DNR from the Picture settings menu.

Use zorxto adjust. The differences may not

always be noticeable (for the best result use lower settings as picture quality can be lost if the setting is too high).

Colour temperature

Colour Temperature increases the ‘warmth’ or ‘coolness’

of a picture by increasing the red or blue tint.

In the Picture settings menu press euntil

Colour Temperature is highlighted.

Picture settings

Black stretch High

MPEG NR Low

DNR Auto.

Colour Temperature Cool

2/2

Press zorxto select between High, Off, Low

and Middle. The effect depends on the broadcast and is most noticeable on dark colours.

Back

Press

zorx

and Warm to suit your preference.

EXIT

to select between Cool, Natural

Watch TV

English

Picture controls continued

Active Backlight Control

When Active Backlight Control is activated it will

automatically optimise the backlighting levels for

dark scenes.

In the PICTURE menu press eto select Active

Backlight Control.

Picture settings

Active Backlight Control

Cinema mode

Film Stabilization

Active Vision M100 On

xvYCC selection

Back

Press

zorx

EXIT

to select On or Off.

PICTURE

Watch TV

1/2

Off

Cinema mode

If there are lines or jagged edges in the film or programme

being viewed, selecting Cinema mode can help correct

this by smoothing out the picture.

In the PICTURE menu press eto select Cinema mode.

Film Stabilization

The Film Stabilization feature allows the adjustment

of motion smoothness.

In the PICTURE menu press eto select Film Stabilization.

Press zorxto select Standard, Smooth or Off.

Active Vision M100

When Active Vision M100 is selected this feature will

reduce ‘smearing’ and on video sources will reduce

In the PICTURE menu press eto select Active

Vision M100.

Picture settings

Active Backlight Control

Cinema mode

Film Stabilization

Active Vision M100 On

xvYCC selection

Press

Back

zorx

picture judder.

PICTURE

EXIT

Watch TV

to select On or Off.

Off

1/2

Picture settings

Active Backlight Control

Cinema mode

Film Stabilization

Active Vision M100 On

xvYCC selection

Back

Press zorxto select On or Off.

PICTURE

EXIT

Watch TV

NOTE: When a DVD with subtitles is being played this mode may not work correctly.

1/2

Off

xvYCC selection (HDMI only)

The colour range xvYCC is an international standard and

enables a wider colour range than conventional signals.

In the PICTURE menu press eto select xvYCC

selection.

Press zorxto select On, Off or Auto.

Picture controls continued

English

3D Colour management

When 3D Colour management is selected it allows the

‘Base colour adjustment’ feature to become available.

In the PICTURE menu press eto select 3D Colour

management.

3D Colour management

Base colour adjustment

Press

Back

zorx

PICTURE

EXIT

Watch TV

to select On or Off.

2/2

Base colour adjustment

The Base colour adjustment feature allows the

adjustment of individual colours to suit personal

preference. This can be useful when using an

In the PICTURE menu press eto select

Base colour adjustment, then press OK.

3D Colour management

Base colour adjustment

external source.

PICTURE

2/2

Base colour adjustment

Red +2 +6 +4

Green 0 0 0

Blue 0 0 0

Yellow 0 0 0

Magenta 0 0 0

Cyan 0 0 0

Reset

Back

Hue Saturation Brightness

EXIT

Watch TV

To return to the original factory settings select Reset and press OK.

Antenna amplifier

If the signal being received by the television is too strong,

this may result in picture interference and/or a buzzing sound. Setting Antenna Amplifier to Off reduces the

signal strength, and can help to remove the interference.

In the SET UP menu press

Amplifier is highlighted.

With zor xselect either On or Off.

Language English

Country UK

Auto tuning

Manual tuning

Antenna Amplifier On

AV connection

Back

until Antenna

SET UP

EXIT

Watch TV

1/2

Back

Press fand eto select an option, then xto

adjust the settings.

EXIT

Watch TV

Picture controls continued,

English

panel lock

Automatic format (Widescreen)

When this television receives a true Widescreen picture and

Auto format is On, it will automatically be displayed in

Widescreen format, irrespective of the

television’s previous setting.

Press MENU and zorxto select the

FUNCTION menu.

Teletext Auto.

Panel lock Off

Auto format On

4:3 stretch Off

Blue screen On

Side panel 1

Back

Press eto highlight Auto format, then zor

to select On or Off.

FUNCTION

EXIT

Watch TV

4:3 stretch

When 4:3 stretch is activated the size switching system

changes 4:3 programs into a full screen picture.

Side panel adjustment

The Side panel feature lightens or darkens the band each

side of the screen when in 4:3 or 14:9 format. This helps

prevent image retention of the band and can also make

viewing in bright or dark conditions more comfortable.

In the FUNCTION menu press euntil Side

panel is highlighted.

Press zorxto adjust.

Picture still

This feature is used to hold a still image on the screen.

uto hold an image on the screen, press u

Press

again to cancel.

Panel lock

Panel lock disables the buttons on the television. All

buttons on the remote control can still be used.

From the FUNCTION menu select Panel lock

and choose On or Off usingzorx.

In the FUNCTION menu press eto highlight

4:3 stretch.

Press zorxto select On or Off.

Blue screen

When Blue screen is selected the screen will turn blue and

the sound will be muted when no signal is received.

In the FUNCTION menu press eto highlight

Blue screen.

Press zorxto select On or Off.

Tel etext Auto.

Panel lock On

Auto format On

4:3 stretch Off

Blue screen On

Side panel 1

Back

When Panel lock is On, a reminder will appear when the buttons on the television are pressed. If the standby

button is pressed the television will switch off and can only be brought out of standby by using the remote control.

FUNCTION

EXIT

Watch TV

Programme timer – digital only

The timers

When all the details have been entered press OK

to save the timer.

English

This feature will set the television to go to a specific

channel at a certain time. It can be used to view a

particular programme, or by setting the mode to daily or

weekly, can be used to view a series of programmes.

Press MENU and zorxto select the TIMER

MENU.

TIMER MENU

Programme Timers OK

Back

EXIT

Watch TV

to select Programme Timers, then

Press

press OK to select.

Press eto select the first programme to be

timed, then press OK. The SET TIMER menu will now appear on screen.

Press fand eto go through the list adding the

details of the programme to be timed by using the number buttons and zandxto make selections.

11:36 Mon, 6 Aug

SET TIMER

Programme Channel 4 1

Date Mon, 6 Aug 2007 06/08

Start Time 12:00

End Time 12.30

Repeat ONCE

Auto-start VCR NO

Subtitles NONE

Audio Language ENGLISH

0 - 9 Enter Number Save Timer MENU Cancel

Auto-start VCR: If your Toshiba media recorder is AV link compatible setting this feature to YES will auto start/stop a recording.

PLEASE NOTE: When a timed programme is about to start, an information screen will appear offering the option of watching or cancelling the programme. The menus and other channels will not be available during the timed programme unless the programme timer is cancelled.

Sleep timer

The television can be set to turn itself off after a

Press MENU and zorxto select the TIMER

menu.

Sleep timer 01:30

Press eto select the Sleep timer. Use the

number buttons to set the required time. For example, to switch the television off in one and a half hours enter 01:30, or press zorxto increase/decrease in steps of 10 minutes.

Press EXIT to finish.

Back

certain time.

TIMER

EXIT

Watch TV

Digital on-screen information and

English

Programme Guide

When viewing in digital mode, the on-screen information and programme guide give access to programme details for all available channels.

Information

Select information by pressing , the

information screen will appear giving details of the channel and programme currently being viewed.

ALL PROGS

Channel 4

Five ITV2 BBC THREE BBC FOUR

Showing also ITV Playalong: Izi starting in 4 minutes on ITV Play…

Tune EXIT Watch TV TV/FAV Change progs Page Up Page Down Showing Also Languages

11:30 King of the Hillx12:00 News at Noon

24 minutes left

That’s What She Said: Hank in uncomfortable with his new colleague’s innuendo, and Dale tries to give up smoking. [S]

To see details of any of the other channels currently available, press fand eto scroll up and down the channel list. As the channel is selected details of the programme currently being broadcast will appear.

Pressing the YELLOW button will activate Showing

also, giving details of programmes which have started on other channels.

To record the following programme, with the

information guide showing, press x. The Tune option in the bottom section of the screen will change to Record, press OK. The SET TIMER screen will appear.

News at Noon

004 Channel 4 12:00-12:30 Mon, 6 Aug

SET TIMER

Start Time 12:00

End Time 12:30

Repeat ONCE

Auto-start VCR NO

Subtitles NONE

Audio Language ENGLISH

0 - 9 Enter Number Save Timer MENU Cancel

11:36 Mon, 6 Aug

…

I/II

ENTERTAINMENT

11:36 Mon, 6 Aug

Select the on-screen guide by pressing GUIDE, the

guide screen will appear highlighting details of the channel and programme currently being viewed. This may take a few moments to appear.

To Buy or Not to Buy

ALL PROGS

BBC ONE

BBC TWO ITV1 Channel 4 Five ITV2 BBC THREE BBC FOUR ITV3 SKY THREE UKTV History More 4

Watch More info EXIT Watch TV TV/FAV Change progs Page Up Page Down Timers

Press zorxfor information of other

programmes scheduled for the channel selected.

For details of other channels currently available,

press fand eto scroll up and down the channel list. As the channel is selected details of the programme currently being broadcast will appear, then press

For information on a highlighted programme

press . To set the timer for that programme press the BLUE button to bring up the

Programme timers menu.

NOTE: Recording can be set from both the

information screen and guide. In order for the recording operation to work the media recorder must be AV link compatible.

Press lyto move the Guide forward by 24

hours, press wl to go back. Pressing yor w

will move the Guide forwards or backwards a page at a time.

Guide

11:36 Mon, 6 Aug

zorx

Monday

11:00 11:30 12:00 12:30

To Buy or Not My Life For Sale Bargain Hunt

Schools: Schools: Tes Sch The Daily Po Working L

This Morning Vanessa’s

ER King of The H News at Noo Headland Trisha Godd Five News Home and A Brainteas

The Montel Will Judge Jud Coronation S Emmerda

This is BBC THREE This is BBC THREE This is BBC FOUR This is BBC FOUR

Faith Where the Heart is Rumpole of th

Tunisia, Egypt Animal Airpo Pop Years 2

The Re-Inventors Seven Wonders of the In

H Deal or No Deal Countdown Warof

yyllww

The details of the programme will have been

added to the screen. Press OK to save.

Digital settings – parental control

In order to prevent viewing of unsuitable films and programmes, channels and menus can be locked. These can then only be accessed with a security code PIN when in digital mode.

English

Setting the PIN

Press MENU and xto select the FEATURE MENU.

FEATURE MENU

Parental Control OK

Favourite and Locked Programmes OK

Favourites ALL PROGS

Common Interface Slots

Software Upgrade OK

Back

EXIT

Watch TV

Use eto select Parental Control then press OK.

Press eto highlight Change Pin then press OK.

PARENTAL CONTROL

Mode ON

Change PIN OK

Back

EXIT

Watch TV

Using the number buttons enter a four digit

number, when these have been entered the screen will ask you to confirm them by entering them again.

NO MODULE

Mode

This feature locks various menus to prevent the television

being retuned or the settings being overridden.

In the PARENTAL CONTROL menu press eto

select Mode.

PARENTAL CONTROL

Mode ON

Change Pin OK

Back

EXIT

Watc h TV

Use zor xto choose between ON, LOCK

MENU, LOCK INSTALL and OFF.

When menus that have been locked are now selected they will only become available when the PIN is entered.

DEFINE PIN NUMBER

New PIN

Confirm PIN – – – –

0 - 9 Enter PIN EXIT

Cancel

* * * *

The PIN number is now set. To activate put the television into standby.

Digital settings – favourite programmes,

locked programmes, encrypted programmes

English

Selecting favourite programmes

Favourite Programmes creates a list of the digital

channels that are watched most. Four lists can be created,

these can be a mixture of television, text and radio channels.

From the FEATURE MENU press eto select

Favourite and Locked Programmes.

FAVOURITE AND LOCKED PROGRAMMES

Prog. Type Name Fav-1 -2 -3 -4

1 BBC ONE

2 BBC TWO

3 ITV1

4 Channel 4

5 Five

6 ITV2

Select MENU Back

Page Up Page Down Select all Deselect all

Use fand eto go through the list of channels

pressing OK to select the ones required, a tick will appear in the box.

Press xto select List 2. Follow the same

procedure to make the selection. When all favourites have been selected press MENU to return to the FEATURE menu.

Use eto highlight Favourites and zor xto

select between ALL PROGS, TV, RADIO, FAV-1 and FAV-2. The number of favourites available depends on how many lists have been created.

Locking programmes

Locked Programmes stops the viewing of digital

channels, they can only be accessed by entering the PIN.

From the FEATURE MENU press eto select

Favourite and Locked Programmes.

Press xrepeatedly to select the Locked

Programme list.

Use fand eto go through the list of channels

pressing OK to select the ones required, a padlock will appear in the box.

FAVOURITE AND LOCKED PROGRAMMES

Prog. Type Name Fav-1 -2 -3 -4

1 BBC ONE

2 BBC TWO

3 ITV1

4 Channel 4

5 Five

6 ITV2

Select MENU Back

Page Up Page Down Lock all Unlock all

Press EXIT and put the television into standby.

When the television is switched back on and any

of the channels in the Locked Programme list are selected the PIN must be entered before they can be accessed.

Encrypted programmes

FEATURE MENU

Parental Control OK

Favourite and Locked Programmes OK

Favourites FAV-1

Common Interface Slots

Software Upgrade OK

Back

EXIT

Watch TV

Press EXIT.

Using the P P Q buttons will now only access those channels in Favourite List 1 when FAV-1 is selected.

NO MODULE

Selecting Encrypted Programmes allows all encrypted

programmes to be shown in the programme list even if

they are not available to select.

In the FEATURE MENU press for eto select Encrypted Programmes.

Use zorxto select ON or OFF.

NOTE: CAMs (Conditional Access Modules) are

available from service providers (see 'Common Interface' section).

+ 266 hidden pages