Toshiba 47WLT66 User Manual
TOSHIBA
47WLT66
Owner's manual
Remember…
For television
Contents
operation queries,
please ring the
helpline…
?
SETTING UP
Safety precautions – Some do’s and don’ts for you to be aware of 3
Installation and important information 4
The remote control – an at-a-glance guide 5
Connecting external equipment – a guide to connecting external equipment to the back of the television 6
Connecting a computer – connecting a computer to the back of the television 7
Controls and input connections – switching on the television, standby, using the controls on the television,
headphone socket, connecting equipment to the side input sockets 8
TUNING THE TELEVISION
DIGITAL – tuning the television for the first time 9
DIGITAL – auto tuning 10
DIGITAL – programme sorting, manual tuning 11
ANALOGUE – tuning analogue mode for the first time, language, country 12
ANALOGUE – manual tune, broadcast system 13
ANALOGUE – auto tune 14
ANALOGUE – programme skip, sorting programme positions 15
CONTROLS AND FEATURES
General controls – changing programme position 16
Stereo and bilingual transmissions – stereo/mono or dual language broadcasts (analogue only) 16
Time display (analogue only) 16
Sound controls – volume, sound mute, bass/treble/balance 16
Sound controls – bass boost, dual (analogue only), stable sound
SRS WOW™ sound effects – SRS 3D, FOCUS and TruBass 17
Widescreen viewing 18
Picture controls – picture position (analogue only), back light 20
Picture controls – picture preferences (contrast, brightness, colour, tint, sharpness), black stretch,
MPEG noise reduction (MPEG NR), digital noise reduction (DNR), colour temperature 21
Picture controls – 3D colour management, base colour adjustment, cinema mode, antenna amplifier 22
Picture controls – automatic format (widescreen), blue screen, side panel adjustment,
picture still 23
Panel lock – disabling the buttons on the television 23
DIGITAL – programme timer 24
Sleep timer 24
DIGITAL – on-screen information and programme guide 25
DIGITAL settings – parental controls (setting the PIN, mode) 26
DIGITAL settings – favourite programmes, locked programmes, encrypted programmes 27
DIGITAL settings – audio languages, subtitles, reset TV, common interface 28
DIGITAL settings – software upgrade (version, auto upgrade, searching for new software) 29
PC settings – picture position, clock phase, sampling clock, reset 30
Input selection and AV connections – input and output sockets for connected equipment,
analogue switch off 31
TEXT SERVICES
ANALOGUE text – setting up, general information, Auto. and LIST modes 33
ANALOGUE text – control buttons 34
DIGITAL interactive services – general information 34
PROBLEM SOLVING
Questions and Answers – answers to some of the more common queries including
manual fine tuning and colour system 35
INFORMATION
Notes – for your own records 38
Specifications and Accessories – technical information about the television, supplied accessories 40
®
17
2
Safety Precautions
This equipment has been designed and manufactured to meet international safety standards but, like any
electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read
the points below for your own safety. They are of a general nature, intended to help with all electronic
consumer products and some points may not apply to the goods you have just purchased.
Air Circulation
Leave at least 10cm clearance around the television
to allow adequate ventilation. This will prevent
overheating and possible damage to the television.
Dusty places should also be avoided.
Heat Damage
Damage may occur if the television is left in direct
sunlight or near a heater. Avoid places subject to
extremely high temperatures or humidity. Place in a
location where the temperature remains between
5°C (41°F) min. and 35°C (94°F) max.
Mains Supply
The mains supply required for this equipment is
220-240v AC 50/60Hz. Never connect to a DC
supply or any other power source. DO ensure that
the television is not standing on the mains lead.
DO NOT cut off the mains plug from this
equipment, this incorporates a special Radio
Interference Filter, the removal of which will impair
its performance. In the UK, the fuse fitted in this
plug is approved by ASTA or BSI to BS1362. It
should only be replaced by a correctly rated and
approved type and the fuse cover must be refitted.
IF IN DOUBT PLEASE CONSULT A COMPETENT
ELECTRICIAN.
Do
DO read the operating instructions before you
attempt to use the equipment.
DO ensure that all electrical connections
(including the mains plug, extension leads and
inter-connections between pieces of equipment)
are properly made and in accordance with the
manufacturers’ instructions. Switch off and
withdraw the mains plug before making or
changing connections.
DO consult your dealer if you are ever in doubt
about the installation, operation or safety of your
equipment.
DO be careful with glass panels or doors on
equipment.
DO NOT REMOVE ANY FIXED COVERS AS THIS
WILL EXPOSE DANGEROUS AND 'LIVE' PARTS.
THE MAINS PLUG IS USED AS A
DISCONNECTING DEVICE AND THEREFORE
SHOULD BE READILY OPERABLE.
Do not
DO NOT obstruct the ventilation openings of the
equipment with items such as newspapers,
tablecloths, curtains, etc. Overheating will cause
damage and shorten the life of the equipment.
DO NOT allow electrical equipment to be exposed
to dripping or splashing or objects filled with liquids,
such as vases, to be placed on the equipment.
DO NOT place hot objects or naked flame sources,
such as lighted candles or nightlights on, or close to
equipment. High temperatures can melt plastic and
lead to fires.
DO NOT use makeshift stands and NEVER fix legs
with wood screws. To ensure complete safety,
always fit the manufacturers’ approved stand,
bracket or legs with the fixings provided according
to the instructions.
DO NOT listen to headphones at high volume, as
such use can permanently damage your hearing.
DO NOT leave equipment switched on when it is
unattended, unless it is specifically stated that it is
designed for unattended operation or has a
standby mode. Switch off by withdrawing the plug,
make sure your family know how to do this. Special
arrangements may need to be made for people
with disabilities.
DO NOT continue to operate the equipment if you
are in any doubt about it working normally, or it is
damaged in any way – switch off, withdraw the
mains plug and consult your dealer.
ABOVE ALL – NEVER let anyone, especially
children, push or hit the screen, push
anything into holes, slots or any other
openings in the case.
NEVER guess or take chances with electrical
equipment of any kind – it is better to be safe
than sorry.
3
Installation and important information
Where to install
Locate the television away from direct sunlight and strong
lights, soft, indirect lighting is recommended for comfortable
viewing. Use curtains or blinds to prevent direct sunlight
falling on the screen.
Place on a sturdy platform, the mounting surface should be
flat and steady. It should then be secured to the wall with a
sturdy tie using the clip on the back of the stand, or secured
to the platform using the fixing strap located underneath the
table top stand, this will prevent it from falling over.
The LCD display panels are manufactured using an
extremely high level of precision technology, however
sometimes some parts of the screen may be missing picture
elements or have luminous spots. This is not a sign of a
malfunction.
Make sure the television is located in a position where it cannot be pushed or hit by objects, as pressure will break or
damage the screen, and that small items cannot be inserted into slots or openings in the case.
Side View Top View
Clip
Please take note
EXCLUSION CLAUSE
Sturdy tie
(as short as possible)
Clip
Clip
Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by:
i) fire;
ii) earthquake;
iii) accidental damage;
iv) intentional misuse of the product;
v) use of the product in improper conditions;
vi) loss and/or damage caused to the product whilst in the possession of a third party;
vii) any damage or loss caused as a result of the owner’s failure and/or neglect to follow the instructions set out in the owner’s
manual;
viii) any loss or damage caused directly as a result of misuse or malfunction of the product when used simultaneously with
associated equipment;
Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or damage including but not limited
to the following, loss of profit, interruption of business, the loss of recorded data whether caused during normal operation or
misuse of the product.
If stationary images generated by text services, channel identification logos, computer displays, video games, on screen menus, etc.
are left on the television screen for any length of time they could become conspicuous, it is always advisable to reduce both the
brightness and contrast settings.
4
The remote control
Simple at-a-glance reference of your remote control.
UP
To mute the sound
Number buttons
To return to the previous programme
To display the digital on-screen
To change programme positions and
When using a TOSHIBA VCR or DVD:
press
/
ll
r
m
press
to PLAY
r
press
q
press
s
press
to EJECT
w
press
to STOP
p
press
l
q
press
l
s
Programme Guide
On-screen Menus
text pages
To select mode
Selectable picture preferences
Widescreen viewing
to PAUSE/STEP
to REWIND
to FAST FORWARD
to SKIP-REWIND
to SKIP-FORWARD
For On/Standby mode
To select input from external sources
To switch between TV, Radio and Favourite
programmes when in digital mode
To exit Menus
When using menus the arrows move the
cursor on the screen up, down, left or
right. OK to confirm your selection
To alter the volume
To display digital on-screen information
To call up text services in analogue mode
and interactive services in digital mode
When in TV mode:
u Still picture
OI/II
Stereo/bilingual transmissions
SUBTITLE Digital Subtitles
Time display
8/9
When using the Programme Guide:
– 24 hours
l
q
+ 24 hours
l
s
Text and interactive service control
buttons
Inserting batteries and effective range of the remote
Remove the back cover to reveal the battery compartment and make sure the batteries are inserted
the right way round. Suitable battery types for this remote are AAA, IEC R03 1.5V.
Do not combine a used, old battery with a new one or mix battery types. Remove dead batteries
immediately to prevent acid from leaking into the battery compartment. Do not expose to excessive
heat such as sunshine, fire or similar. Dispose of them in a designated disposal area.
The performance of the remote control will deteriorate beyond a distance of five metres or outside an
angle of 30 degrees from the centre of the television. If the operating range becomes reduced the
batteries may need replacing.
5
Connecting external equipment
Before connecting any external equipment, turn off all main power switches. If there is no switch
remove the mains plug from the wall socket.
SCART 1 (EXT1)
CABLE HOLDER
SCART 2 (EXT2)
COMMON INTERFACE
The Common Interface is
.
for a Conditional Access
Module (CAM). There is
access for two CAMs.
Contact a service provider.
COMPONENT
VIDEO (EXT3)
☛
a decoder
*
could be Digital
Satellite or any
other compatible
decoder.
HDMI™ INPUT SOCKETS
media recorder
IN/OUT
FIXING STRAP
SAT
decoder*
MEDIA
TV
REC
Before connecting the aerial, video and audio
cables, remove the back terminal covers by
squeezing the tab and pulling the covers out.
Aerial cables:
Connect the aerial to the socket on the rear of the
television. If you use a decoder* and/or a media recorder
it is essential that the aerial cable is connected through
the decoder and/or through the media recorder to the
television.
SCART leads:
Connect the video recorder IN/OUT socket to the
television. Connect the decoder TV socket to the
television. Connect the media recorder SAT socket to the
decoder MEDIA REC. socket.
Before running Auto tuning put your decoder and media
recorder to Standby.
The phono sockets alongside the COMPONENT VIDEO
INPUT sockets will accept L and R audio signals.
In addition there is a fixed/variable external audio ouput
which enables the connection of a suitable Hi-Fi unit.
Make sure the Speaker option in the Sound menu is set
to Off. The variable option is altered by using the sound
controls.
6
HDMI™ (High-Definition Multimedia Interface) is for use
with a DVD, decoder or electrical equipment with digital
audio and video output. It is designed for best
performance with 1080i high-definition video signals but
will also accept and display 480i, 480p, 576i, 576p and
720p signals.
A wide variety of external equipment can be
connected to the back of the television, therefore
the relevant owners manuals for all additional
equipment must be referred to.
We recommend SCART 1 for a decoder and SCART 2 for
a media recorder.
If connecting S-VIDEO equipment, set the INPUT for
EXT2. See page 31.
If the television automatically switches over to monitor
external equipment, return to normal television by
pressing the desired programme position button. To
recall external equipment, press
DTV, EXT1, EXT2, EXT3(C), HDMI1, HDMI2, PC,
or ATV.
The cable holder can be used for aerial, media recorder
and audio cables. Do not use the cable holder as a
handle and make sure all cables are removed before
moving the television.
HDMI, the HDMI logo, and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing, LLC.
to select between
B
Connecting a computer
Before connecting any external equipment, turn off all main power switches. If there is no switch
remove the mains plug from the wall socket.
the back of your television
Audio cable for PC to
television connection
(not supplied)
Computer
Mini D-sub
15 pin connector
RGB PC cable
(not supplied)
Conversion adaptor if required (not supplied)
Connect the PC cable from the computer to the PC
terminal on the back of the television.
Connect the audio cable to the PC/HDMI1 Audio
socket on the back of the television. Select PC from the
PC/HDMI1 audio options in the AV connection
menu located in the SET UP menu.
Press the Bto select PC mode.
The following signals can be displayed:
VGA: 640 x 480/60 Hz (VESA)
SVGA: 800 x 600/60 Hz (VESA)
XGA: 1024 x 768/60 Hz (VESA)
SXGA: 1280 x 1024/60 Hz (VESA)
IMPORTANT NOTE: SXGA will display but it will
not be to VESA standard.
PLEASE NOTE:
Some PC models cannot be connected to this
television.
An adaptor is not needed for computers with a DOS/V
compatible mini D-sub 15 pin terminal.
A band may appear at the edges of the screen or parts
of the picture may be obscured. This is due to scaling
of the picture by the set, it is not a malfunction.
When PC input mode is selected some of the
television’s features will be unavailable e.g. Manual
setting in the SET UP menu, Colour, Tint, DNR and
Black Stretch in the Picture settings menu.
Signal information for Mini D-sub 15 pin connector
Pin assignment
for RGB/PC
terminal
Pin. No. Signal name Pin No. Signal name
1R9NC
2 G 10 Ground
3B11NC
4 NC (not connected) 12 NC
5 NC 13 H-sync
6 Ground 14 V-sync
7 Ground 15 NC
8 Ground
7
Controls and input connections
A wide variety of external equipment can be connected to the input sockets on the side of the television.
Whilst all the necessary adjustments and controls for the television are made using the remote control, the
buttons on the television may be used for some functions.
RED LED – Power on
GREEN LED – Active standby
Switching on
If the RED LED is unlit check that the mains plug is
connected to the power supply. If the picture does not
appear press
moments.
To put the television into Standby press
control, the GREEN active standby LED will appear
(see ‘Software Upgrade’ section) next to the RED for a few
moments then disappear. To view the television press
again. The picture may take a few seconds to appear.
on the remote control, it may take a few
i
on the remote
i
i
Using the remote control
Press the MENU button on the remote control to see
the menus.
In digital mode the menu bar at the top of the screens
will show three different topics shown in symbols. As each
symbol is selected by pressing the Sor Rbutton on the
remote control, its respective options will appear below.
In analogue mode the menu appears as a list of five
topics. As each symbol is selected by pressing the Sor
button on the remote control, its respective options will
appear below.
R
Standby
To use the options press the Pand Q button on the
remote control to move up and down through them and
OK, Sor Rto select the required choice. Follow the on
screen instructions. The functions of each menu are
described in detail throughout the manual.
☛
Input 3
(side) will take
priority over
EXT3 (back) if
both connections
are used at the
same time.
INPUT 3
(EXT3)
Using the controls and connections
To alter the volume press — j +
To alter the programme position press
Press MENU and S,R, Q or P to control the sound
and picture options.
Press MENU twice to finish.
When connecting sound equipment to EXT3, connect
the audio output of the equipment to the phono sockets
on the television.
To select the Input, press
EXT3 as described on page 31. The television will
automatically sense the type of signal.
Please always refer to the owner’s manual of the
equipment to be connected for full details.
Please note: Inserting the headphone plug will mute the
sound from all speakers.
B
.
eeFff
.
until the display shows
8
Tuning the television for the first time
Before switching on the television put your decoder and media recorder to Standby if they are connected
and ensure the aerial is connected. To set up the television use the buttons on the remote control as detailed
on page 5.
Press the power-on button, the Welcome screen
1
will appear. This screen will appear the first time
that the television is switched on and each time
the television is reset.
Thank you for choosing this Toshiba television.
First you need to tune your television.
Please ensure the aerial is connected
before proceeding.
Press to continue
Press OK to start tuning.
2
The AUTO TUNING screen will appear and the
3
television will start to search for available stations.
The progress bar will move along the line.
AUTO TUNING
Progress
Prog. Name Type UHF Quality
70 CBBC Channel 34 GOOD
87 Community 21 POOR
When the search is complete the television will
automatically select programme one.
The AUTO TUNING screen will display the total
number of services found.
AUTO TUNING
86 programmes found
55 TV 24 Radio 7 Text
Press OK to watch programme
Prog. Name Type UHF Quality
1 BBC ONE 34 GOOD
2 BBC TWO 34 GOOD
3 ITV1 31 GOOD
4 Channel 4 31 POOR
5 five 48 GOOD
6 ITV2 31 POOR
Change Watch
Page Up Page Down Sort
Use Q orPto move through the list to select a
4
programme then press OK to view.
EXIT
Cancel
You must allow the television to complete
the search.
9
Digital auto tuning
NOTE: As new services are broadcast it will be necessary to re-tune the television in order to view them.
Auto tuning
Auto tuning will completely re-tune
the television and can be used to up date the channel list.
It is recommended that Auto tuning is run
periodically to ensure that all new services are
added. All current programmes and settings, i.e.
favourites and locked programmes, will be lost.
Press MENU, the SETUP MENU will appear.
1
Use Q to highlight Auto tuning. Press OK.
A screen will appear warning that previous
2
digital programmes and settings will be deleted.
Press OK to continue with the Auto tuning.
WARNING
! All previous digital programmes and
settings will be deleted.
Continue?
YES
MENU
Select
The television will start to search for all available
stations.
Progress
Prog. Name Type UHF Quality
70 CBBC Channel 34 GOOD
87 Community 21 POOR
Cancel
AUTO TUNING
You must allow the television to complete
the search.
When the search is complete the Auto tuning
screen will display the total number of services
found.
AUTO TUNING
86 programmes found
55 TV 24 Radio 7 Text
Press OK to watch programme
Prog. Name Type UHF Quality
1 BBC ONE 34 GOOD
2 BBC TWO 34 GOOD
3 ITV1 31 GOOD
4 Channel 4 31 POOR
5 five 48 GOOD
6 ITV2 31 POOR
Change Watch
Page Up Page Down Sort
Use Q orPto move through the list to select a
3
programme then press OK to view.
At any time by pressing and holding Ba list
will appear on screen showing modes and all
stored external equipment. Use Pand Q to
highlight and OK to select.
3C
B
2
B
1
B
DTV
ATV
PC
HDMI2
EXIT
Cancel
10
When DTV mode is selected pressing
repeatedly will scroll through all connected
equipment and the last channel being viewed in
DTV mode.
B
Digital programme sorting,
manual tuning
NOTE: When the television is switched off the mode being viewed at the time will automatically be selected
when the television is switched back on.
Use Q orPto move through the list to your
Programme sorting
The station order may be changed to suit personal
Press MENU, the SETUP MENU will appear on
1
screen.
Use Q to move down through the list and
2
highlight Programmes. Press OK.
TV Setup OK
Languages OK
Auto tuning OK
Manual tuning OK
Programmes OK
MENU
With the list of stations now showing use
3
Q orPto highlight the station you want to
move and press R.
Back
preference.
SETUP MENU
EXIT
Watch TV
4
preferred position. As you do so the other
stations will move to make room.
Press Sto store your move. Repeat as necessary,
5
then press EXIT.
Manual tuning
This feature is available for service engineers or can be
used for direct channel entry if the multiplex channel
Select Manual tuning from the SETUP MENU
1
and press OK.
Enter the multiplex number using the number
2
buttons and then press OK. The television will
automatically search for that multiplex.
When the multiplex is found any channels not
currently on the programme list will be added
and the programme information at the top of
the screen will be updated.
Repeat as necessary. Press EXIT to finish.
3
is known.
The selected station will be moved to the right of
the screen.
Prog. Name
1 BBC ONE
2 BBC TWO
3 ITV1
4 Channel 4
5 five
6 ITV2
Page Up Page Down
PROGRAMMES
Sort Store
MENU
Back
EXIT
Watch TV
11
Tuning Analogue mode for the first time
The Quick Setup feature will tune all analogue channels currently available in the area. To put the
television into ATV mode press and hold
Select ATV mode. The Quick Setup screen will
1
appear.
Quick Setup
Select your language.
Language English
EXIT
Watch TV
Using SorRselect your language, then press
2
OK.
Then press SorRto select your country.
3
To start Auto tuning press OK.
4
Searching
Channel : C22 Station : BBC1
EXIT
Stop
The search will begin for all available stations.
5
The slide bar will move along the line as the
search progresses.
Auto tuning
OK
Next
then use Por Q to highlight ATV. Press OK to select.
B
Use Q orPto move through the list to select a
7
programme then press EXIT to view.
The station order may be changed using the
Manual tuning screen (see the analogue
‘Sorting programme positions’ section).
At any time by pressing and holding
will appear on screen showing modes and all
stored external equipment. Use Pand Q to
highlight and OK to select.
2
B
1
B
DTV
ATV
PC
HDMI2
HDMI1
When ATV mode is selected pressing
repeatedly will scroll through all connected
equipment and the last channel being viewed in
ATV mode.
B
B
a list
You must allow the television to complete
When the search is complete the television will
automatically select programme position 1 and
the Manual tuning screen will appear.
Prog. Channel Station
1 C22 BBC1
2 C28 BBC2
3 C25 ITV
4 C32 CH4
5 C69
6 C69
OK
Select Sort
MENU
Back
the search.
Manual tuning
EXIT
Watch TV
12
Loading...