Toshiba 43A62, 50A62, 50A61, 61A61 User Manual

OWNER'S MANUAL

Projection Television

Introduction

your TV

Connecting

Using the

Remote Control

43A61, 43A62, 50A61, 50A62, 61A61, 61A62

Owner's Record

The model number and serial number are on the back of your TV. Record these numbers in the spaces below. Refer to these numbers whenever you communicate with your Toshiba dealer about this TV.

Model number:

Serial number:

your TV

Setting up

Features

Using the TV’s

Appendix

Index

23565704

Dear Customer,

Thank you for purchasing this Toshiba TV. This manual will help you use the many exciting features of your new TV.

Before operating the TV, please read this manual completely, and keep it nearby for future reference.

Child Safety

It Makes A Difference Where Your TV Stands

Safety Precautions

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning symbol in the triangle tells you that the voltage inside this product may be strong enough to cause an electric shock. DO NOT TRY TO SERVICE THIS PRODUCT YOURSELF.

The exclamation mark in the triangle tells you that important operating and maintenance instructions follow this symbol.

NOTE TO CATV INSTALLERS IN THE USA

This is a reminder to call the CATV system installer’s attention to Article 820-40 of the NEC, which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. For additional antenna grounding information, see items 24 and 25 on page 4.

NOTICE OF POSSIBLE TV STAND INSTABILITY

DANG ER: RISK OF SERIOUS PERSONAL INJURY OR DEATH!

the TOSHIBA TV stand recommended in the “Specifications” section only. result in instability, causing possible injury or death.

NOTICE OF POSSIBLE ADVERSE EFFECTS

ON TV PICTURE TUBE

If a fixed (non-moving) pattern remains on the TV screen for long periods of time, the image can become permanently engrained in the picture tube. This type of

damage is NOT COVERED BY YOUR WARRANTY.

See item 32 on page 4.

Use this TV with

Use with other stands may

Congratulations on your purchase! As you enjoy your new TV, keep these safety tips in mind:

The Issue

 If you are like most Americans, you have a TV in your home.

Many homes, in fact, have more than one TV.

 The home theater entertainment experience is a growing

trend, and larger TVs are popular purchases; however, they are not always supported on the proper TV stands.

 Sometimes TVs are improperly secured or inappropriately

situated on dressers, bookcases, shelves, desks, audio speakers, chests, or carts. As a result, TVs may fall over, causing unnecessary injury.

Toshiba Cares!

 The consumer electronics industry

is committed to making home

entertainment enjoyable and safe.

 The Consumer Electronics

Association formed the Home

Entertainment Support Safety

Committee, comprised of TV and consumer electronics furniture

manufacturers, to advocate

children’s safety and educate

consumers and their families about

television safety.

Tune Into Safety

 One size does NOT fit all! Use appropriate

furniture large enough to support the weight of your

TV (and other electronic components).

 Use appropriate angle braces, straps, and anchors to secure

your furniture to the wall (but never screw anything directly into the TV).

 Carefully read and understand the other enclosed

instructions for proper use of this product.

 Do not allow children to climb on or play with furniture

and TVs.

 Avoid placing any item on top of your TV (such as a VCR,

remote control, or toy) that a curious child may reach for.

 Remember that children can become excited while watching

a program and can potentially push or pull a TV over.

 Share our safety message about this hidden hazard of

home with your family and friends. Thank you!

2500 Wilson Blvd. Arlington, VA 22201 U.S.A. Tel. 703-907-7600 Fax 703-907-7690 www.CE.org

CEA is the Sponsor, Producer and

05/02.2

Manager of the International CES

the

Important Safety Instructions

QUALIFIED

SERVICE

TECHNICIAN

Installation, Care, and Service

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near

water.

6) Clean only with a dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

CAUTION: To reduce the risk of electric shock, do not use the polarized plug with an extension cord, receptacle, or other outlet unless the blades can be inserted completely to prevent blade exposure.

Wide plug

Installation

Follow these recommendations and precautions and heed all warnings when installing your TV:

15) Never modify this equipment. Changes or modifications may void: a) the warranty, and b) the user’s authority to operate this equipment under the rules of the Federal Communications Commission.

16) DANGER: RISK OF SERIOUS PERSONAL

INJURY, DEATH, OR EQUIPMENT DAMAGE! Never place the TV on

an unstable cart, stand, or table. The TV may fall, causing serious personal injury, death, or serious damage to the TV.

17) Never place or store the TV in direct sunlight; hot, humid areas; areas subject to excessive dust or vibration; or locations with temperatures at or below 41°F (5°C).

18) Always place the TV on the floor or a sturdy, level, stable surface that can support the weight of the unit.

19) Never place items such as vases, aquariums, or candles on top of the TV.

10) Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where it exits the apparatus.

11) Only use attachments/accessories specified by the

manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use

caution when moving the cart/apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during

lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

20) Never block or cover the slots or openings in the TV cabinet back, bottom, and sides. Never place the TV:

• on a bed, sofa, rug, or similar

surface;

• too close to drapes, curtains,

or walls; or

• in a confined space such as a

bookcase, built-in cabinet, or any other place with poor ventilation.

The slots and openings are provided to protect the TV from overheating and to help maintain reliable operation of the TV.

21) Never allow anything to rest on or roll over the power cord, and never place the TV where the power cord is subject to wear or abuse.

22) Never overload wall outlets and extension cords.

05/02.2

Ground clamp

Antenna discharge unit (NEC Section 810-20)

Grounding conductors (NEC Section 810-21)

Power service grounding electrode system (NEC Art 250 Part H)

Ground clamps

Antenna lead-in wire

Electric service equipment

QUALIFIED

SERVICE

TECHNICIAN

23) Always operate this equipment from a 120 VAC, 60 Hz power source only.

29) [This item applies to projection TVs only.] If the air temperature rises suddenly (for example, when the TV is first delivered), condensation may form on the lenses. This can make the picture appear distorted or the color appear faded. If this happens, turn off the TV for 6 to 7 hours to allow the condensation to evaporate.

24) Always make sure the antenna system is properly grounded to provide adequate protection against voltage surges and built-up static charges (see Section 810 of the National Electric Code).

25) DANGER: RISK OF SERIOUS PERSONAL

INJURY OR DEATH!

• Use extreme care to make sure you are never in a position where your body (or any item you are in contact with, such as a ladder or screwdriver) can accidentally touch overhead power lines. Never locate the antenna near overhead power lines or other electrical circuits.

• Never attempt to install any of the following during lightning activity: a) an antenna system; or b) cables, wires, or any home theater component connected to an antenna or phone system.

30)For added protection of your TV from lightning and power surges, always unplug the power cord and disconnect the antenna from the TV if you leave the TV unattended or unused for long periods of time.

31) During normal use, the TV may make occasional snapping or popping sounds. This is normal, especially when the unit is being turned on or off. If these sounds become frequent or continuous, unplug the power cord and contact a Toshiba Authorized Service Center.

32) Possible Adverse Effects on TV Picture Tube: If a fixed (non-moving) pattern remains on the TV screen for long periods of time, the image can become permanently engrained in the picture tube and cause subtle but permanent ghost images. This type of damage is NOT COVERED BY YOUR WARRANTY. Never leave your TV on for long periods of time while it is displaying the following formats or images:

• Fixed Images, such as PIP/POP windows, stock tickers,

video game patterns, TV station logos, and websites.

• Special Formats that do not use the entire screen. For

example, viewing letterbox style (16:9) media on a normal (4:3) display (gray bars at top and bottom of screen); or viewing normal style (4:3) media on a widescreen (16:9) display (gray bars on left and right sides of screen).

Care

For better performance and safer operation of your TOSHIBA TV, follow these recommendations and precautions:

26) Always sit approximately 10–25 feet away from the TV and as directly in front of it as possible. The picture can appear dull if you sit too far to the left or right of the TV, or if sunlight or room lights reflect on the screen. Turn the TV off to check for reflections on the screen, and then remove the source of reflections while viewing the TV.

27) Always unplug the TV before cleaning. Never use liquid or aerosol cleaners.

28) WARNI NG: RISK OF ELECTRIC SHOCK!

Never spill liquids or push objects of any kind into the TV cabinet slots.

Service

33) WARNI NG: RISK OF ELECTRIC SHOCK! Never attempt to service the

TV yourself. Opening and

removing the covers may expose you to dangerous voltage or other hazards. Refer all servicing to a Toshiba Authorized Service Center.

34) If you have the TV serviced:

• Ask the service technician to use only replacement parts specified by the manufacturer.

• Upon completion of service, ask the service technician to perform routine safety checks to determine that the TV is in safe operating condition.

35) When the TV reaches the end of its useful life, ask a qualified service technician to properly dispose of the TV. Improper disposal may result in a picture tube implosion

05/02.2

and possible personal injury.

Important Safety Information ............................. 2-4

Introduction................................................................ 5

Welcome to Toshiba ......................................................... 5

Exploring your new TV ................................................... 5

Connecting your TV .................................................. 7

Note regarding picture quality ....................................... 7

Connecting a VCR .......................................................... 7

Connecting a cable converter box .................................... 8

Connecting a cable converter box and a VCR .................. 8

Connecting a DVD player /satellite receiver and

a VCR.............................................................................. 9

Connecting a DVD player with ColorStream

and a VCR ....................................................................... 9

Connecting two VCRs ................................................... 10

Connecting a camcorder ................................................ 11

Connecting an audio system .......................................... 11

Connecting an A/V receiver ........................................... 12

Using the remote control ...................................... 13

Preparing the remote control for use .............................. 13

Installing the remote control batteries ............................ 13

Using the remote control with a VCR or

cable TV converter ......................................................... 13

Programming the remote control for use with a

non-Toshiba VCR or cable TV converter ....................... 14

VCR code table ...................................................... 15

Cable TV converter code table ................................ 16

Learning about the remote control ................................. 17

Setting up your TV .................................................. 18

Changing the on-screen display language ....................... 19

Selecting the antenna input ............................................ 19

Adding channels to the TV’s memory ............................ 20

Programming channels automatically ...................... 20

Adding and erasing channels manually.................... 21

Changing channels ........................................................ 21

Changing channels using SpeedSurf........................ 21

Adjusting the color convergence .................................... 22

Using the TV’s features.......................................... 23

Adjusting the channel settings ........................................ 23

Switching between two channels ............................. 23

Programming your favorite channels ....................... 23

Labeling channels ................................................... 24

Watching picture-in-picture (PIP) .................................. 26

Switching the main and small pictures .................... 27

Changing the position of the small picture.............. 27

Freezing the small picture ....................................... 27

Using the LOCKS menu ............................................... 28

Entering the PIN code ............................................ 28

If you cannot remember your PIN code .................. 28

Using the V-CHIP menu ............................................... 29

ENABLE BLOCKING .......................................... 29

TV RATING

(Independent rating system for broadcasters) .......... 29

MPAA RATING

(Independent rating system for movies) .................. 30

BLOCKING OPTION .......................................... 30

Unlocking programs temporarily ............................ 31

Locking channels ........................................................... 31

Locking video inputs ..................................................... 32

Locking the front panel buttons ..................................... 32

Adjusting the picture ..................................................... 33

Selecting the picture modes..................................... 33

Adjusting the picture quality ................................... 33

Saving new preferences ........................................... 34

Using the flesh tone feature..................................... 34

Using the noise reduction feature ............................ 34

Selecting the color temperature ............................... 35

Resetting your picture adjustments ......................... 35

Watching video input .................................................... 36

Selecting the video input labels ...................................... 36

Using the closed caption feature..................................... 37

Setting the sleep timer.................................................... 38

Setting the clock ............................................................ 38

Adjusting the sound ....................................................... 39

Muting the sound ................................................... 39

Selecting stereo/SAP broadcasts .............................. 39

Using the surround sound feature ........................... 40

Adjusting the sound quality .................................... 41

Resetting your audio adjustments ........................... 41

Using the sub-bass system (SBS) ............................. 42

Turning off the built-in speakers ............................. 42

Selecting the Audio OUT sound ............................. 43

Using the StableSound

Selecting the background of the menu display ............... 44

Displaying on-screen information .................................. 44

Viewing the demonstration mode .................................. 44

Understanding the auto power off feature ...................... 45

Understanding the last mode memory feature ................ 45

feature .............................. 43

Appendix ................................................................... 46

Specifications ................................................................. 46

Tr oubleshooting ............................................................. 47

Limited United States Warranty ..................................... 48

Limited Canada Warranty .............................................. 49

Index .......................................................................... 50

Introduction

Welcome to Toshiba

Congratulations! You have purchased one of the finest projection TV’s on the market. The goal of this manual is to guide you through setting up and operating your Toshiba TV as quickly as possible.

This manual applies to models 43A61, 43A62, 50A61, 50A62, 61A61, and 61A62. Before you start reading, check the model number by looking at the rear of the TV.

your TV

Connecting

Models 50A61 and 50A62 are used in this manual for illustration purposes. Instructions are based on using the remote control. You can also use the controls on the TV if they have the same name as those on the remote control.

Please read all the safety and operating instructions carefully, and keep the manual for future reference.

Exploring your new TV

Using the

Remote Control

your TV

Setting up

You can operate your TV using the buttons on the front panel or remote control. The back panel and front panel (behind the door) provide all the terminal inputs to connect other equipment to the TV.

TV front

(50A61/50A62)

Remote control sensor (behind the screen)

VOL VOL

yzx •

Power

indicator (red)

TV/VIDEO

EXIT TV/VIDEO DEMO POWER

RECALL

LIGHT

TV CABLE VCR

MUTE

TV/VIDEO

123

456

789

CH RTN

100

C.CAPT

FAV

RESET

STOP SOURCE

REC TV/VCR REW FF

ADV/

PIP CH

ENTER

ADV/

PIP CH

ENT

POWER

TIMER

VOL

FAV

EXIT

PLAY PIP

Features

Using the TV’s

Appendix

Index

TV rear (50A61/50A62)

Video/Audio inputs

(Video 3)

S-VIDEO

VIDEO

MONO

AUDIO

VIDEO 1 VIDEO 2

Volume x •

Channel yz

AUDIO CENTER

CHANNEL IN

ON OFF

AUDIORAUDIO

COLOR STREAM INPUT

DVD IN

OUT

EXIT

POWER

STILL LOCATE SWAP

DEMO

)

ANT( 75

ANT-1

OUT

VAR

AUDIO

ANT-2

VIDEO

L/ MONO

Connecting your TV

Note: Cables are not supplied with your TV.



Coaxial cable is the cable that comes in from your antenna, cable TV service, or cable converter box. Coaxial cable uses “F” connectors.



Standard stereo A/V cables usually come in sets of three, and are typically color-coded according to use: yellow for video, red for stereo right audio, and white for stereo left (or mono) audio. Your TV’s standard A/V inputs are color-coded in the same manner as the cables.



S-Video cable is for use with video equipment that has S-Video connectors.



Component video cables come in sets of three (typically color-coded red, green, and blue), and are for use with video equipment that has component video connectors. Your TV’s ColorStream coded in the same manner as the cables.

NOTE REGARDING PICTURE QUALITY

When connecting video equipment to your Toshiba TV:



For GOOD picture quality: Use a standard yellow video cable.



For BETTER picture quality: If your equipment has S-video connectors, use an S-video cable instead of a standard yellow video cable. (You still must connect the standard red and white audio cables for full system connection, but do not connect a standard yellow video cable at the same time or the picture performance will be unacceptable.)



For BEST picture quality: If your equipment has component video connectors, use component video cables instead of a standard yellow video cable or S-video cable. (You still must connect the standard red and white audio cables for full system connection.)

(component video) inputs are color-

Coaxial (antenna) cable

Introduction

Standard stereo A/V cables (typically color-coded yellow for video, red and white for audio)

S-video cable

your TV

Connecting

Component video cables (typically color-coded red, green, blue)

CAUTION: Do not plug in any power cords until you have finished connecting all equipment.

Using the

Remote Control

Connecting a VCR

This connection allows you to watch local channels and video programs, play or record on the VCR while watching TV, and record from one channel while watching another channel.

You will need:

• two coaxial cables (one or more may be provided by your cable company)

• one pair of audio cables (one single cable for a mono VCR)

• one video cable

Cable lead-in from

Stereo VCR

VIDEO AUDIO

Cable Box or Antenna

OUT

S-VIDEO

VIDEO

MONO

AUDIO

VIDEO 1 VIDEO 2

COLOR

STREAM INPUT

DVD IN

AUDIO CENTER

CHANNEL IN

ON OFF

AUDIO

OUT to TV

OUT

VAR AUDIO

VIDEO

L/ MONO

AUDIO

OUT

IN from ANT

CH 3 CH 4

ANT( 75

ANT-1

OUT

ANT-2

)

Note:

If you have a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable.

If you have an S-VHS VCR, use an S-video cable instead of a standard video cable for better picture performance.

Do not connect a standard video cable and an S-video cable to Video-1 (or Video-2) at the same time or the picture performance will be unacceptable.

The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

your TV

Setting up

Features

Using the TV’s

Appendix

Index

Connecting a cable converter box

This connection allows you to view a different picture on your PIP if you use a converter box to view premium channels. Select ANT 2 and

Introduction

tune the TV to channel 3 or 4 (whichever channel is vacant in your area). Use the converter box to change channels.

You will need:

your TV

Connecting

Using the

Remote Control

Connecting a cable converter box and a VCR

• three coaxial cables

S-VIDEO

VIDEO

MONO

AUDIO

VIDEO 1 VIDEO 2

COLOR STREAM INPUT

DVD IN

AUDIO CENTER

CHANNEL IN

ON OFF

AUDIORAUDIO

OUT

VAR AUDIO

VIDEO

MONO

ANT( 75

ANT-1

OUT

ANT-2

)

Cable converter box

From Cable

Note:

You cannot view premium channels in the PIP window.

PIP swap is not available with this connection.

INOUT

your TV

Setting up

Features

Using the TV’s

Appendix

This connection allows you to watch and record basic and premium cable channels, watch videotapes, and record one channel while watching another. To use the TV’s features, select ANT-1. To view premium channels or record with the VCR, select ANT-2, tune the TV to channel to 3 or 4 (whichever channel is vacant in your area), and use the converter box to change channels.

You will need:

• one cable splitter

• four coaxial cables (one or more may be provided by your cable company)

• one pair of audio cables (one single audio cable for a mono VCR)

• one video cable

From Cable

Note:

If you have a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable.

If you have an S-VHS VCR, use an S-video cable instead of a standard video cable for better picture performance.

Do not connect a standard video cable and an S-video cable to Video-1 (or Video-2) at the same time or the picture performance will be unacceptable.

Index

Stereo VCR

Connecting a DVD player or satellite receiver and a VCR

This connection allows you to watch DVD/satellite, VCR, and TV programs. You can record one TV channel while watching another channel.

You will need:

• two (or three, if satellite receiver is used) coaxial cables (one or more may be provided by your cable or satellite company)

• two pairs of audio cables (one single and one pair of audio cables for a mono VCR)

• one video cable

• one S-video cable

Stereo VCR

VIDEO AUDIO

From Cable

IN from ANT

CH 3 CH 4

OUT to TV

S-VIDEO

VIDEO

MONO

AUDIO

VIDEO 1 VIDEO 2

COLOR STREAM INPUT

DVD IN

AUDIO CENTER

CHANNEL IN

ON OFF

AUDIORAUDIO

OUT

)

ANT( 75

ANT-1

OUT

VAR AUDIO

ANT-2

VIDEO

MONO

OUT

Note:

For better picture quality, use an S-video cable instead of a standard video cable between the TV and DVD player/satellite receiver.

Do not connect a standard video cable and an S-video cable to Video-1 (or Video-2) at the same time or the picture performance will be unacceptable.

Introduction

your TV

Connecting

Using the

Remote Control

your TV

Setting up

AUDIO

From Satellite dish

(for satellite

receiver only)

IN from ANT

S-VIDEO

VIDEO

OUTOUT

OUT

DVD Player/Satellite Receiver

Connecting a DVD player with ColorStream

(component video) and a VCR

This connection allows you to watch DVD, VCR, and TV programs, and record TV programs. You can record one channel while watching another channel. Your TV is capable of using ColorStream (component video). Connecting your TV to a DVD player with component video (such as a Toshiba DVD player with ColorStream), can greatly enhance picture quality and performance.

You will need:

• two coaxial cables (one or more may be provided by your cable company)

• three pairs of audio cables (two single and one pair of audio cables for a mono VCR)

• two video cables

• one set of component video cables

(See illustration on next page)

Features

Using the TV’s

Appendix

Index

Introduction

your TV

Connecting

Using the

Remote Control

Connecting two VCRs

This connection allows you to record (dub/edit) from one VCR to another VCR while watching a video program. You will also be able to record from one TV channel while watching another channel.

your TV

Setting up

Features

Using the TV’s

Appendix

Index

You will need:

Stereo VCR

IN from ANT

OUT to TV

From Antenna

CH 3 CH 4

VIDEO AUDIO

OUT

)

AUDIO

OUT

ANT( 75

ANT-1

OUT

VAR AUDIO

ANT-2

VIDEO

L/ MONO

S-VIDEO

VIDEO

MONO

AUDIO

VIDEO 1 VIDEO 2

PbY

COLOR STREAM

AUDIO CENTER

CHANNEL IN

ON OFF

AUDIORAUDIO

COLOR STREAM INPUT

DVD IN

VIDEO

OUT

DVD Player with component video

• two coaxial cables (one or more may be provided by your cable company)

• two pairs of audio cables (two single audio cables for mono VCRs)

• two video cables

VCR1

VIDEO AUDIO

From Antenna

IN from ANT OUT to TV

CH 3 CH 4

S-VIDEO

VIDEO

MONO

AUDIO

COLOR STREAM

VIDEO 1 VIDEO 2

INPUT

VIDEO AUDIO

OUT

AUDIO CENTER

CHANNEL IN

ON OFF

AUDIORAUDIO

DVD IN

OUT

CH 3 CH 4

)

ANT( 75

ANT-1

OUT

VAR AUDIO

ANT-2

VIDEO

MONO

OUT

Note:

To play from the DVD player, the DVD player and TV must use ColorStream connections.

Note:

Do not connect the same VCR to the output and input jacks on the TV at the same time.

If you are using an S-VHS VCR, use an S-video cable instead of a standard video cable for better picture performance.

Do not connect a standard video cable and an S-video cable to Video-1 (or Video-2) at the same time or the picture performance will be unacceptable.

To dub or edit, VCR 2 must select Line IN, and the TV must select Video-1.

*The Audio OUT jacks can output the

sound of either the main or PIP picture

(see “Selecting the Audio OUT sound” on page 43).

** The Video OUT jack does not output a PIP

picture.

VCR2

Connecting a camcorder

This connection allows you to watch video materials recorded on a camcorder.

You will need:

• one pair of audio cables

• one video cable

Camcorder

VIDEO

AUDIO

OUT

Note:

If you have an S-VHS camcorder, use an S-video cable (in the S-video jacks) instead of a standard video cable between the TV and camcorder.

Do not connect a standard video cable and an S-video cable to Video-3 at the same time or the picture performance will be unacceptable.

Introduction

your TV

Connecting

Connecting an audio system

This connection allows you to use an audio amplifier to adjust the audio level. This also allows you to use external speakers.

To control the audio, turn on the TV and the stereo amplifier, and turn off the built-in speakers (see“ Turning off the built-in speakers” on page 42).

You will need:

• one coaxial cable (may be provided by your cable company)

• one pair of audio cables

Amplifier

LINE IN LR

From Cable, Cable Box

or Antenna

Note:

To hear sound, the volume of both the TV and the external audio amplifier must be set above 0 (zero).

Using the

Remote Control

your TV

Setting up

Features

Using the TV’s

S-VIDEO

VIDEO

MONO

AUDIO

VIDEO 1 VIDEO 2

COLOR STREAM INPUT

DVD IN

AUDIO CENTER

CHANNEL IN

ON OFF

AUDIORAUDIO

OUT

)

ANT( 75

ANT-1

OUT

VAR

AUDIO

ANT-2

VIDEO

L/ MONO

Appendix

Index

Connecting an A/V receiver

This connection allows you to use an audio/video (A/V) receiver to enhance your TV’s sound.

Introduction

your TV

Connecting

Using the

Remote Control

your TV

Setting up

If you have a system with Dolby Pro Logic* surround sound, you can add to the realism of the sound by using the TV speakers as center channel speakers.

You will need:

Connection example of Dolby Pro Logic surround system

• one coaxial cable (may be provided by your cable company)

• one pair of audio cables

• one video cable

• one audio cable for the audio center channel

To A/V receiver

Video

OUT

S-VIDEO

VIDEO

MONO

AUDIO

VCR

AUDIO CENTER

CHANNEL IN

ON OFF

AUDIORAUDIO

COLOR STREAM

VIDEO 1 VIDEO 2

INPUT

DVD IN

Audio Video

Video

OUT

VAR AUDIO

VIDEO

L/ MONO

OUT

Center

OUT

ANT( 75

ANT-1

OUT

ANT-2

From

Antenna

)

ON OFF

LDP/DVD

Audio

Caution:

To avoid damaging the speakers:

• Turn off the TV before connecting or disconnecting the Audio Center Channel cable.

• Do not connect from the A/V receiver’s Center Speaker OUT (amplified signal) to the TV’s Audio Center Channel IN.

Note:

Refer to the instructions provided with your A/V receiver for details about your surround sound system.

When the Audio Center Channel ON/OFF switch is ON, the TV speakers will function as center channel speakers only.

To adjust the center channel speaker volume, use the center level control on the A/V receiver.

To use the TV speakers as normal speakers, set the Audio Center Channel ON/OFF switch to the OFF position.

Features

Using the TV’s

Appendix

Index

A/V receiver

Audio

Video

Audio

center

channel

Left speaker

T V

Surround speaker L

Right speaker

Surround speaker R

___________

* “Dolby Pro Logic” is a trademark of Dolby Laboratories Licensing Corporation.

Using the remote control

Preparing the remote control for use

With the remote control, you can operate your TV, most VCR models, and cable TV converters together, even if they are different brands. If you will be using your TV with a Toshiba VCR, your remote control is already programmed and ready to use. If you own different brands of VCRs and/or converters, you first have to program your remote control. (See “Programming the remote control for use with a non-Toshiba VCR or a cable TV converter” on page 14.)

Installing the remote control batteries

To install the batteries:

1. Slide the battery cover off of the back of the remote control.

2. Install two “AA” size alkaline batteries. Match the + and - signs on the batteries to the signs on the battery compartment.

Note:

Your TV’s remote control may or may not operate your VCR or cable TV converter.

Refer to the owner’s manuals supplied with your other equipment to see which features are available. In addition, the original controllers may have features not available on this remote control. If you would like to continue to use these features, you may want to use the original remote control.

Caution:

• Dispose of batteries in a designated disposal area. Do not throw batteries into a fire.

• Do not mix battery types or combine used batteries with new ones.

• Remove dead batteries immediately to prevent battery acid from leaking into the battery compartment.

• If you do not intend to use the remote control for a long time, remove the batteries.

Introduction

your TV

Connecting

Using the

Remote Control

your TV

Setting up

3. Slide the battery cover back on to the remote control until the lock snaps.

Using the remote control with a VCR or a cable TV converter

To control a VCR:

Set the TV/CABLE/VCR switch to the VCR position. The shaded buttons shown at right will control the VCR. The unshaded buttons will operate the TV as usual.

To control a cable TV converter:

Set the TV/CABLE/VCR switch to the CABLE position. The shaded buttons in the top part of the illustration at right will control the cable TV converter. The other buttons will operate the TV as usual.

If you own a non-Toshiba VCR or cable TV converter, see “Programming the remote control for use with a non-Toshiba VCR or a cable TV converter” on page 14.)

RECALL

LIGHT

TV CABLE VCR

FAV

TV/VIDEO

MUTE

123

456

789

CH RTN

100

ADV/

PIP CH

C.CAPT

ENTER

RESET

ADV/

PIP CH

STOP SOURCE

REC TV/VCR REW FF

STILL LOCATE SWAP

ENT

PLAY PIP

POWER

TIMER

VOL

EXIT

TV/CABLE/VCR

POWER

Channel yz

Chanel Number

Enter

FAV

PLAY STOP Fast Forward Rewind TV/VCR

Record

Features

Using the TV’s

Appendix

Index

Programming the remote control for use with a non-Toshiba VCR or a cable TV converter

The TV remote control is preprogrammed to operate Toshiba VCRs

Introduction

your TV

Connecting

Using the

Remote Control

and cable TV converters. To use the remote control to operate a non-Toshiba VCR or cable

converter:

1. Refer to the VCR and Cable TV converter code tables on pages 15–16 to find the corresponding code for your VCR or converter.

If more than one code is listed, try each one separately until you find the one that works.

2. If you are programming the remote control to operate your:

• VCR, set the TV/CABLE/VCR switch on the remote control

to VCR.

• Cable converter, set the TV/CABLE/VCR switch on the

remote control to CABLE.

3. While holding down RECALL, press the Channel Number buttons (0–9) to enter the code for your brand of VCR or converter.

4. Point the remote control at the VCR or converter and press POWER to test the code.

If the VCR or converter responds, you have entered the correct code.

If the VCR or converter does not respond to the remote control, you may have entered the wrong code. Repeat steps 1–4 using another code.

5. To control the TV, set the TV/CABLE/VCR switch to TV.

LIGHT

TV CABLE

MUTE

VCR

123

456

789

100

PIP CH

C.CAPT

FAV

ENTER

RESET

PIP CH

ADV/

RECALL

TV/VIDEO

CH RTN

ENT

POWER

TIMER

VOL

EXIT

RECALL

POWER

TV/CABLE/ VCR Switch

Channel yz

Channel Numbers

Enter

FAV

Note:

Every time you replace the batteries, you must reprogram the remote control.

Some newer VCRs are capable of working on either of two remote codes. These VCRs have a switch labeled “VCR1/VCR2.” If your VCR has this kind of switch and does not respond to any of the codes for your VCR brand, set the switch to the other position (VCR1 or VCR2) and reprogram the remote control.

your TV

Setting up

Features

Using the TV’s

Appendix

For future reference, write down the codes you used:

VCR code _____________________

Cable TV converter code _____________________

Index

VCR code table

Brand name Code number

Adventura 019

Aiko 297

Aiwa 019

Akai 060,068,080,125,

261

American High 054

Asha 259

Audiovox 056

Beaumark 259

Bell & Howell 123

Brandt 206

Broksonic 140,203,230,314,

380

Calix 056

Canon 054

Capehart 039

Carver 100

CCE 091,297

Citizen 056,297

Colt 091

Craig 056,066,091,259

Curtis Mathes 054,060,079

Cybernex 259

Daewoo 039,064,297

Daytron 039

Dynatech 019

Electrohome 056

Electrophonic 056

Emerex 051

Emerson 019,021,056,062,

080,087,140,203,

227,228,230,231,

297,313,314,380,

498

Fisher 066,073,085,123

Fuji 052,054

Funai 019,344

Garrard 019,344

GE 054,079,084,221

Go Video 251,298

Goldstar 037,056,057

Gradiente 019

Harley Davidson 019

Harman/Kardon 057,094

Harwood 087,091

Headquarter 065

HI-Q 066

Hitachi 060,061,084,124,

254

Jensen 060

JVC 027,060,086

Kenwood 057,060,086

KLH 091

Kodak 054,056

Lloyd 019

Lloyd’s 227

Logik 091

LXI 056

Magnavox 054,058,100,129,

168

Magnin 259

Marantz 054,100

Marta 056

Masushita 054

MEI 054

Memorex 019,054,056,058,

065,066,067,123,

259

MGA 062,080

MGN Technology 259

Minolta 061,124

Mitsubishi 062,080,086,094,

192,233,261

Motorola 054,067

MTC 019,259

Multitech 019,091

Nad 077

NEC 057,059,060,069,

086

Nikko 056

Noblex 259

Olympus 054

Optimus 056,067,077,123

Optonica 081

Orion 498

Panasonic 054,096,181,244

Penney 054,056,057,059,

061,073,259

Pentax 061,084,124

Philco 054

Philips 054,081,100,129

Pilot 056

Pioneer 077,086

Portland 039

Protec 091

Pulsar 058

Quarter 065

Quartz 065

Quasar 054,096

Radio Shack 019,056,344

Radix 056

Randex 056

RCA 061,079,084,096,

124,125,168,221

Realistic 019,054,056,065,

066,067,081,085,

123,259

Ricoh 053

Runco 058

Samsung 064,259

Sanky 058,067

Sansui 060,086

Sanyo 065,066,123,259

Scott 062,064,140,203,

229,230,231

Sears 054,056,061,065,

066,073,085,123,

124

Sharp 067,081

Shintom 091

Shogun 259

Singer 091

Sony 051,052,053,054

STS 061

Sylvania 019,054,062,100,

129

Symphonic 019,344

Tatung 060

Teac 019,060

Technics 054,181

Teknika 019,054,056,071

Telefunken 060,206

TMK 227,259

Toshiba 062,064,085,229,

231,385

Totevision 056,259

Unitech 259

Vector 064

Vector Research 057,059

Video Concepts 059,064,080

Videosonic 259

Wards 019,054,061,066,

067,081,091,168,

231,259

XR-1000 019,054,091

Yamaha 057

Zenith 052,053,058

Introduction

your TV

Connecting

Using the

Remote Control

your TV

Setting up

Features

Using the TV’s

Appendix

Index

Cable TV converter code table

Introduction

your TV

Connecting

Using the

Remote Control

your TV

Setting up

Features

Using the TV’s

Appendix

Index

Brand name Code number

ABC 020,022,026,027,

030,032,033,036,

066

Antronix 041

Archer 041,058,172

Belcor 075

Cable Star 075

Cabletenna 041

Cableview 041

Century 172

Citizen 172

Colour Voice 044,050

Comtronics 059,079

Contec 038

Dae Ryung 027

Eastern 021

Focus 419

Garrard 172

GC Electronics 035,075

Gemini 034,089

General Instrument 030,295

GoldStar 059,163

Hamlin 028,039,053,278,

292

Hitachi 030

Hytex 026

Jasco 172

Jerrold 022,030,031,033,

034,043,066,295

Macom 052

Magnavox 046

Memorex 019

Movie Time 175

NSC 089,175

Oak 026,038,267

Panasonic 019,040,126

Paragon 019

Philips 044,046,047,048,

049,050,172

Pioneer 042,163,552

Popular Mechanics 419

Pulsar 019

RCA 040

Recoton 419

Regal 039,278,292

Regency 021

Rembrandt 030,089

Runco 019

Samsung 059,163

Scientific Atlanta 025,027,036,296

Signal 034,059

Signature 030

SL Marx 059

Sprucer 040

Standard

Components 174

Starcom 022,034,066

Stargate 034,059

Starquest 034

Sylvania 020

Teleview 059

Texscan 020

Tocom 031,032,078

Toshiba 019

Tusa 034

Unika 041,172

United Artists 026

United Cable 022

Universal 041,058,075,096,

172,210

Viewstar 046,079,230

Zenith 019

Zentek 419

+ 35 hidden pages