Toshiba 40VL758, 46VL758 User Manual
VL75* Digital
Series
Contents
English
INSTALLING YOUR TV
Safety Precautions ...........................................4
Installation and important information ..............5
The remote control ..........................................7
Inserting batteries and effective range ........ 7
CONNECTING YOUR TV
Connecting external equipment ........................ 8
Bundling the cables ......................................... 9
Connecting an HDMI
input .......................................................... 10
To connect an HDMI device ...................... 10
To connect a DVI device ........................... 10
HDMI’s ARC (Audio Return Channel)
feature ................................................. 10
REGZA-LINK connection .................................11
Connecting a computer .................................. 12
To connect a PC to the RGB/PC terminal ...12
To connect a PC to the HDMI terminal ...... 12
Connecting a home network ........................... 13
To connect the TV to a home network -
Wired ................................................... 13
To connect the TV to a home network with an
internet connection - Wireless ................13
Controls and input connections ......................14
Switching on ...........................................14
Using the remote control ..........................14
Using the controls and connections ........... 14
SETTING UP YOUR TV
Startup Application ........................................15
Quick Setup ............................................15
Ant/Cable In (if available) ........................16
Auto Tuning ............................................ 17
ATV Manual Tuning ....................................... 17
Tuning ....................................................17
Skip ........................................................19
Sorting positions ......................................19
DTV Manual Tuning ....................................... 20
Manual Tuning ........................................20
Manual Tuning for DVB-C ........................ 20
DTV Settings .................................................. 20
Channels ................................................ 20
Standby Channel Update ......................... 21
DVB Character Set ...................................21
Dynamic Scan .........................................21
Location setting ....................................... 21
Analogue switch-off ...............................21
®
or DVI device to the HDMI
CONTROLS AND FEATURES
General controls ............................................ 22
Quick Menu ............................................ 22
Selecting positions ................................... 22
The Time Display – analogue only ........... 22
Stereo and Bilingual transmissions ............ 22
Sound controls ..............................................23
Volume controls and mute sound .............. 23
Dual ....................................................... 23
Balance .................................................. 23
Sound Navi ............................................. 23
Surround Settings .................................... 24
Dolby Volume
Dynamic Range Control ........................... 24
Audio Level Offset ................................... 24
Audio Description .................................... 24
Widescreen viewing .......................................25
Picture controls .............................................. 27
Picture Mode ........................................... 27
Picture preferences .................................. 27
Reset ...................................................... 27
Colour Master ......................................... 27
Base Colour Adjustment ........................... 28
Colour Temperature ................................ 28
Auto Brightness Sensor Settings ................ 28
Active Backlight Control ...........................29
Black/White Level .................................... 29
Static Gamma .........................................29
MPEG NR – Noise Reduction ..................... 29
DNR – Digital Noise Reduction ................. 29
Resolution+ ............................................ 29
Active Vision M100 .................................. 29
Film Stabilization ..................................... 30
Resetting the advanced picture settings ..... 30
Expert Picture Settings .............................. 30
Control Visualization ............................... 31
Automatic Format (Widescreen) ................ 31
4:3 Stretch .............................................. 31
Blue Screen ............................................. 31
Picture Position ........................................32
Picture still ..............................................32
HDMI Information Display ........................ 32
Using your home network .............................. 33
Setting up the Network .................................. 34
Wireless Setup ........................................ 34
Advanced Network Setup ......................... 36
DNS Setup ..............................................37
Network Connection Test ......................... 38
Using the software keyboard .......................... 38
®
....................................... 24
2
English
Setting up the Media Renderer feature ............39
Installation .............................................. 39
Media Renderer ....................................... 39
Device Name Setup .................................39
Web Password Setup ................................ 40
Media Controller Setup ............................40
Maximum Volume Setup ..........................40
Using BBC iPlayer ..........................................41
Using YouTube™ ........................................... 41
Using the Function Menu ......................... 42
Using the Media Player .................................. 44
Basic operation ....................................... 44
Viewing photo files .................................. 46
Viewing movie files (on a DLNA CERTIFIED™
Server or USB device) ............................47
Playing music files (on a DLNA CERTIFIED™
Server or USB device) ............................49
Using the Photo Frame feature ....................... 51
To open Photo Frame ............................... 51
Setting the features ................................. 51
Other features ...............................................53
Panel Lock ..............................................53
The timers .....................................................53
Programme Timers – digital only ............. 53
On Timer ................................................ 54
Sleep Timer .............................................54
Energy Saving Settings ...................................55
Automatic Power Down ............................ 55
No Signal Power Down ............................55
Digital on-screen information and Programme
Guide .........................................................55
Information .............................................55
Guide ..................................................... 56
Genre selection/searching .......................57
Digital settings – parental control ................... 57
Setting the PIN ........................................57
Parental Setup .........................................58
Network Lock ..........................................58
Digital settings – Channel Options ..................58
Selecting favourite channels ..................... 58
Favourite Channel Lists ............................58
Skip channels .......................................... 59
Locking channels .....................................59
Digital settings – other settings .......................59
Subtitles .................................................. 59
Audio languages ..................................... 59
Common Interface ................................... 60
Software Upgrade and Licences ......................60
Auto Upgrade ......................................... 60
Searching for New Software .....................60
Network Upgrade .................................... 61
Software Licences .................................... 61
System Information and Reset TV .................... 61
System Information .................................. 61
Reset TV .................................................. 61
PC Settings ................................................... 62
Horizontal and Vertical Position ................ 62
Clock Phase ............................................62
Sampling Clock ....................................... 62
Reset ...................................................... 62
Input selection and AV connections ................. 63
Input selection ........................................ 63
External input skip ...................................63
Labeling video input sources .................... 64
Colour Decoding ..................................... 64
PC Audio ................................................ 64
HDMI 2 Audio .........................................64
Side Shared Audio ................................... 64
HDMI Settings .........................................65
Digital Audio Output ...............................65
Using REGZA-LINK ........................................66
Enable REGZA-LINK ................................. 66
TV Auto Power ......................................... 66
Auto Standby .......................................... 66
Amplifier Control ..................................... 66
Speaker Preference .................................. 66
REGZA-LINK input source selection ........... 66
REGZA-LINK playback device control ........ 67
REGZA-LINK one touch play ..................... 67
REGZA-LINK system standby ..................... 67
REGZA-LINK system audio control ............. 67
Toshiba PC compatible with REGZA-LINK ....... 67
TEXT SERVICES
Text services ..................................................68
Selecting modes ...................................... 68
Text information ...................................... 68
Navigating pages using Auto ................... 68
Navigating pages using LIST .................... 68
Control buttons ....................................... 69
PROBLEM SOLVING
Questions and Answers .............................. 70
INFORMATION
License Information ....................................... 73
Information ................................................... 75
Specifications and accessories ........................ 78
3
INSTALLING YOUR TV
Safety Precautions
English
This equipment has been designed and manufactured
to meet international safety standards but, like any
electrical equipment, care must be taken to obtain the
best results and for safety to be assured. Please read
the points below for your own safety. They are of a
general nature, intended to help with all electronic
consumer products, and some points may not apply to
the goods you have just purchased.
Air Circulation
Leave more than 10cm clearance around the television
to allow adequate ventilation. This will prevent
overheating and possible damage to the television.
Dusty places should also be avoided.
Heat Damage
Damage may occur if the television is left in direct
sunlight or near a heater. Avoid places subject to
extremely high temperatures or humidity. Place in a
location where the temperature remains between 5°C
(41°F) min. and 35°C (94°F) max.
Mains Supply
The mains supply required for this equipment is 220240v AC 50/60Hz. Never connect to a DC supply or
any other power source. DO ensure that the television
is not standing on the mains lead. Use only the
supplied lead.
DO NOT cut off the mains plug from this equipment,
this incorporates a special Radio Interference Filter, the
removal of which will impair its performance.
In the UK, the fuse fitted in the plug is approved by
ASTA or B SI to BS1 362. It s hould on ly be rep laced by a
correctly rated and approved type and the fuse cover
must be refitted.
IF IN DOUBT, PLEASE CONSULT A COMPETENT
ELECTRICIAN.
Do
DO
read the operating instructions before you attempt
to use the equipment.
DO
ensure that all electrical connections (including the
mains plug, extension leads and inter-connections
between pieces of equipment) are properly made and
in accordance with the manufacturers’ instructions.
Switch off and withdraw the mains plug before making
or changing connections.
DO
consult your dealer if you are ever in doubt about
the installation, operation or safety of your equipment.
DO
be careful with glass panels or doors on
equipment.
DO NOT REMOVE ANY FIXED COVERS AS THIS WILL
EXPOSE DANGEROUS AND 'LIVE' PARTS.
THE MAINS PLUG IS USED AS A DISCONNECTING
DEVICE AND THEREFORE SHOULD BE READILY
OPERABLE.
Do not
DO NOT
equipment with items such as newspapers, tablecloths,
curtains, etc. Overheating will cause damage and
shorten the life of the equipment.
DO NOT
dripping or splashing or objects filled with liquids, such
as vases, to be placed on the equipment.
DO NOT
such as lighted candles or nightlights on, or close to
equipment. High temperatures can melt plastic and
lead to fires.
DO NOT
wood screws. To ensure complete safety, always fit the
manufacturer’s approved stand, bracket or legs with
the fixings provided according to the instructions.
DO NOT
unattended, unless it is specifically stated that it is
designed for unattended operation or has a standby
mode. Switch off by withdrawing the plug, and make
sure your family knows how to do this. Special
arrangements may need to be made for people with
disabilities.
DO NOT
in any doubt about it working normally, or if it is
damaged in any way – switch off, withdraw the mains
plug and consult your dealer.
ABOVE ALL – NEVER let anyone, especially
children, push or hit the screen and cabinet back,
or push anything into holes, slots or any other
openings in the case. These actions will damage
screen or internal parts.
NEVER connect the supplied COMPONENT
Adaptor cable or AV Adaptor cable to a wall
outlet. These cables are ONLY for insertion into
the socket provided for the purpose on the rear/
side of the TV.
NEVER guess or take chances with electrical
equipment of any kind – it is better to be safe
than sorry.
obstruct the ventilation openings of the
allow electrical equipment to be exposed to
place hot objects or naked flame sources,
WARNING:
fire, keep candles or other open
flames away from this product at all
times.
use makeshift stands and NEVER fix legs with
leave equipment switched on when it is
continue to operate the equipment if you are
To prevent the spread of
4
INSTALLING YOUR TV
Installation and important information
Where to install
Locate the television away from direct sunlight and strong
lights. Soft, indirect lighting is recommended for
comfortable viewing. Use curtains or blinds to prevent
Fixing strap
direct sunlight falling on the screen.
Place the TV on a stable, level surface that can
support the weight of the TV. In order to prevent
Injury and maintain stability of this apparatus,
secure the TV to the level surface using the strap if
fitted, or to a wall using a sturdy tie to the P clips
provided.
The LCD display panels are manufactured using an
extremely high level of precision technology; however,
sometimes some parts of the screen may be missing picture
elements or have luminous spots. This is not a sign of a
malfunction.
Fixing strap
Stand style is dependent on model
Make sure the television is located in a position where it cannot be pushed or hit by objects, as pressure will break
or damage the screen. Also, please be certain that small items cannot be inserted into slots or openings in the case.
Cleaning the screen and cabinet…
Turn off the power, and clean the screen and cabinet with a soft, dry cloth. The enclosed cleaning cloth is for cabinet cleaning.
do not
We recommend that you
use any proprietary polishes or solvents on the screen or cabinet as this may cause damage.
When using a Wall Bracket
Please use a wall bracket appropriate for the size and weight
of the LCD TV.
• Two people are required for installation.
• Never use the four screws attached to the TV.
• To install a wall-mount from another manufacturer, use the
SPACERS
(supplied).
1
Unplug and remove any cables and/or other component
connectors from the rear of the TV.
2
Carefully lay the front of the unit face down on a flat,
cushioned surface such as a quilt or blanket.
3
Follow the instructions provided with your wall bracket.
Before proceeding, make sure the appropriate bracket(s)
are attached to the wall and the back of the TV as
described in the instructions provided with the wall
bracket.
4
Make sure to place the spacers supplied between the
bracket and the back of the TV.
5
Always use the screws supplied or recommended by the
wall mount manufacturer.
Screw
Wall bracket
Spacer
(supplied)
TV back panel
Removing the Pedestal Stand:
1
Carefully lay the front of the unit face down on a flat,
cushioned surface such as a quilt or blanket. Leave the
stand protruding over the edge of the surface.
NOTE:
Extreme care should always be used when
removing the pedestal stand to avoid damage to the LCD
panel.
2
Remove the five screws.
3
Once you have removed all five screws holding the
pedestal stand in place, remove the pedestal stand from
the TV by sliding the pedestal stand away from the TV.
Sturdy tie (as short as possible)
Stand clip
‘P’ Clip
Five screws
English
Remove four screws.
(Do not reuse these screws for
attaching a wall bracket.)
Place four spacers (supplied).
5
INSTALLING YOUR TV
English
The digital reception function of this television is only effective in the countries listed in the “Country” section of
Please take note
the “SETUP” menu. Depending on country/area, some of this television's functions may not be available. Reception
of future additional or modified services can not be guaranteed with this television.
If stationary images generated by 4:3 broadcasts, text services, channel identification logos, computer displays,
video games, on-screen menus, etc. are left on the television screen for any length of time, they could become
conspicuous. It is always advisable to reduce both the brightness and contrast settings.
Very long, continuous use of the 4:3 picture on a 16:9 screen may result in some retention of the image at the 4:3
outlines. This is not a defect of the LCD TV and is not covered under the manufacturer’s warranty. Regular use of
other size modes (eg: Super Live) will prevent permanent retention.
EXCLUSION CLAUSE
Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by:
i) fire;
ii) earthquake;
iii) accidental damage;
iv) intentional misuse of the product;
v) use of the product in improper conditions;
vi) loss and/or damage caused to the product whilst in the possession of a third party;
vii) any damage or loss caused as a result of the owner’s failure and/or neglect to follow the instructions set out in the owner’s
manual;
viii) any loss or damage caused directly as a result of misuse or malfunction of the product when used simultaneously with
associated equipment;
Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or damage including but not limited
to the following: loss of profit, interruption of business, the loss of recorded data whether caused during normal operation or
misuse of the product.
NOTE:
A Toshiba wall bracket or stand, where available, must be used to maintain the product's BEAB approval.
6
The remote control
7
Simple at-a-glance reference for your remote
control.
2
3
6
7
10
12
15
17
19
21
25
24
1
For On/Standby mode
2
To select external input sources
3
Selectable Picture preferences
4
Widescreen viewing
5
s
Stereo/bilingual transmissions
6
To select TV Mode
7
To access the analogue or digital Channel List
8
To access More Information Menu
9
Number buttons
10
Switch the Audio Description On/Off
11
To return to previous programme position
12
To alter the TV volume
13
To display on-screen information
To access the index page in Text mode
14
To mute the TV sound
15
To access Quick Menu
16
To change programme positions
To change TEXT pages
17
To display the digital on-screen Programme Guide
1
4
5
8
9
11
13
16
14
18
20
22
23
26
2
28
INSTALLING YOUR TV
18
To exit menus
19
20
When using menus, the arrows move the cursor on the screen
up, down, left or right. Press
21
On-screen Menus
22
To return to previous Menu
23
Colour buttons:
24
To call up text services
25
To access Media Player Menu
26
Digital Subtitles or Analogue TEXT Subtitle pages if available
27
When in TV mode:
r
D
When using Programme
Guide:
Z
z
CC
cc
28
When using REGZA-LINK:
1
AUDIO
SET UP
V
ROOT
CONTENTS
TOP
DVD
To page up, down, left or right
Text and interactive service control buttons
Picture still
Analogue time
display
- 24 hours
+ 24 hours
- 1 page
+ 1 page
To turn On/Standby
To access
To access
To EJECT
To access
To access
To access
To access
OK
to confirm your selection
When in Text mode:
A
To reveal concealed
text
B
To hold a wanted
page
C
To enlarge text
display size
D
To select a page
whilst viewing a
normal picture
During Playback:
c
To PLAY
v
To STOP
W/w
To PAUSE/STEP
Z
To SKIP-BACK
CC
To REWIND
cc
To FAST FORWARD
z
To SKIP-FORWARD
AUDIO
Menu
SET UP
Menu
ROOT
Menu
CONTENTS
TOP
DVD
Menu
Menu
Menu
Inserting batteries and effective range
Remove the back cover to
reveal the battery compartment
and make sure the batteries are
inserted the proper way.
Suitable battery types for this
remote are AAA, IEC R03 1.5V.
Do not combine a used, old
battery types. Remove dead batteries immediately to prevent
acid from leaking into the battery compartment. Dispose of
them in accordance with instructions on page 74 of this
manual.
Warning:
heat such as sunshine, fire or the like.
The performance of the remote control will deteriorate beyond
a distance of five metres or outside an angle of 30 degrees
from the centre of the television. If the operating range
becomes reduced, the batteries may need replacing.
batteries must not be exposed to excessive
battery with a new one or mix
English
7
CONNECTING YOUR TV
Connecting external equipment
English
Before connecting any external equipment, turn off all main power switches. If there is no switch,
remove the mains plug from the wall socket.
LAN port
COMPONENT VIDEO INPUT*
VIDEO INPUT**
OPTICAL DIGITAL AUDIO OUTPUT
PC/HDMI2 AUDIO (shared)
®
HDMI
INPUT SOCKETS
Aerial/Cable
SCART Adaptor cable
(supplied)
media recorder
POWER switch
POWER cord
FIXING STRAP
Aerial cables:
- - - - - - - - - - - - - - - - - - - - - -
Connect the aerial to the socket on the rear of the television.
If you use a decoder and/or a media recorder, it is essential
that the aerial cable is connected through the decoder and/or
through the media recorder to the television.
SCART leads:
Connect the media recorder
Connect the decoder
. . . . . . . . . . . . . . . . . . . . . . . . . .
IN/OUT
TV
socket to the television.
socket to the television.
Use the SCART Adaptor cable (supplied).
Before running
recorder to
*COMPONENT VIDEO INPUT
Use the COMPONENT Adaptor cable (supplied).
The AUDIO terminals are shared with the
**VIDEO INPUT
Use the A/V Adaptor cable (supplied).
The AUDIO terminals are shared with the
INPUT
.
Auto Tuning
Standby
connection:
, put your decoder and media
.
connection:
VIDEO INPUT
COMPONENT
.
The Digital Audio Output socket enables the connection of a
suitable surround sound system.
NOTE: this output is always
active.
HDMI® (High-Definition Multimedia Interface) is for use with a
DVD decoder or electrical equipment with digital audio and
video output.
For acceptable video or PC signal formats through the HDMI
terminals, see page 76.
NOTE:
Although this television is able to connect to HDMI
equipment, it is possible that some equipment may not
operate correctly.
LAN
port is used to connect the TV to your home network.
This TV can play digital content stored on a DLNA CERTIFIED™
product with server function.
A wide variety of external equipment can be connected
to the back of the television; therefore, the relevant
owner
’s
manuals for
all
additional equipment must be
referred to for exact instructions.
If the television automatically switches over to monitor external
equipment, return to normal television by pressing the desired
programme position button. To recall external equipment,
press
o
to select between
HDMI 1, HDMI 2, HDMI 3, HDMI 4, PC
When the external input mode is selected while viewing DTV
mode, the SCART socket does not output video/audio signals.
DTV, EXT 1, EXT 2, EXT 3
or
ATV
.
8
,
Bundling the cables
Install the cable clamps, and put the cables in these.
Stand type
Wall Mount type
CONNECTING YOUR TV
English
Cable Clamps
Cable Clamps
9
CONNECTING YOUR TV
Connecting an HDMI® or DVI
English
device to the HDMI input
The HDMI input on your television receives digital
audio and uncompressed digital video from an
HDMI source device or uncompressed digital video
from a DVI (Digital Visual Interface) source device.
This input is designed to accept HDCP (High-Bandwidth
Digital-Content Protection) programme material in digital
form from EIA/CEA-861-D–compliant
devices (such as a set-top box or DVD pl aye r with H DMI or DVI
output). For acceptable video signal formats, see page 76.
NOTE:
• Some early HDMI equipment may not work properly with
your latest HDMI TV, due to the adoption of a new standard.
Please unplug your HDMI cable first and then try setting the
INSTAPORT™
Your early HDMI source should operate properly with your
television. See page 65.
• Supported Audio format: Linear PCM, Dolby Digital (AC-3),
sampling rate 32/44.1/48kHz.
and
Enable Content Type
To connect an HDMI device
Connect an HDMI cable (type A connector) to the HDMI terminal.
For proper operation, it is recommended that you use an HDMI
cable with the HDMI Logo ( ).
• If your HDMI connection is capable of 1080p and/or your
television is capable of refresh rates greater than 50Hz, you
will need a Category 2 cable. Conventional HDMI/DVI cable
may not work properly with this model.
• HDMI cable transfers both video and audio. Separate
analogue audio cables are not required (see illustration).
• See “HDMI 2 Audio” on page 64.
the back of your television
[1]
consumer electronic
options to “
Off
To connect a DVI device
Connect an HDMI-to-DVI adaptor cable (HDMI type A
connector) to the HDMI 2 terminal and audio cables to the PC/
HDMI 2 (AUDIO) socket (see illustration).
• The recommended HDMI-to-DVI adaptor cable length is
6.6 ft (2m).
• An HDMI-to-DVI adaptor cable transfers video only.
Separate analogue audio cables are required.
• See “HDMI 2 Audio” on page 64.
”.
Audio cable for HDMI to
television connection
(not supplied)
HDMI-to-DVI
DVI device
NOTE:
To ensure that the HDMI or DVI device is reset properly, it is
recommended that you follow these procedures:
• When turning on your electronic components, turn on the
television first, and then the HDMI or DVI device.
• When turning off your electronic components, turn off the
HDMI or DVI device first, and then the television.
adaptor Cable
HDMI cable
HDMI device
To view the HDMI device video, press the
HDMI 1, HDMI 2, HDMI 3 or HDMI 4 mode.
o
button to select
HDMI’s ARC (Audio Return Channel) feature
This feature enables the audio signal of the TV to be sent to the
AV amplifier via the HDMI cable. It will not be necessary to
connect a cable from the audio output of the TV to the audio
input of the AV amplifier to reproduce the audio received from
the tuner of the TV through the AV amplifier.
AV amplifier that supports ARC
HDMI cable
10
CONNECTING YOUR TV
REGZA-LINK connection
You can control the basic functions of connected audio/video devices using the television’s remote control
if you connect a REGZA-LINK compatible AV amplifier or playback device. For an explanation of setup and
operations, see pages 66–67.
the back of your television
Playback device
AV amplifier
Playback device
English
For the setup shown above, you will need three HDMI cables.
NOTE:
• If several devices are connected, the REGZA-LINK feature
may not operate properly.
• For proper operation, it is recommended that you use HDMI
cables with the HDMI Logo ( ).
• This function is available when one PC and one AV amplifier
are connected separately. However, it may not operate
properly if the PC is connected via the AV amplifier.
Before controlling the device(s):
• After completing the above connections, set the REGZA-LINK
Setup menu as you desire (see page 66).
• The connected devices must also be set. For details, see the
operation manual for each device.
• The REGZA-LINK feature uses CEC technology as regulated
by the HDMI standard.
• This feature is limited to models incorporating Toshiba’s
REGZA-LINK. However, Toshiba is not liable for those
operations. Refer to individual instruction manuals for
compatibility information.
11
CONNECTING YOUR TV
Connecting a computer
English
With either an RGB/PC or an HDMI connection, you
can watch your computer’s display on the television
and hear the sound from the television’s speakers.
To connect a PC to the RGB/PC terminal
When connecting a PC to the RGB/PC terminal on the
television, use an analogue RGB (15-pin) computer cable and
a PC audio cable for the PC/HDMI 2 (AUDIO) socket. Select
PC/HDMI 2 Audio
from the
menu located in the
the back of your television
Computer
SETUP
options in the
menu.
Mini D-sub 15 pin
connector
Audio cable for PC t o
television connection
(not supplied)
RGB PC cable
(not supplied)
AV Connection
• A band may appear at the edges of the screen or parts of the
picture may be obscured. This is due to scaling of the picture
by the set, it is not a malfunction.
• When PC input mode is selected, some of the television’s
features will be unavailable e.g.
SETUP
menu.
• Some PC models may output unique signals that the
television may be unable to detect (see page 75).
Colour System
To connect a PC to the HDMI terminal
PC
When connecting a PC to the HDMI terminal on the television,
use an HDMI-to-DVI adaptor cable and an analogue audio
cable.
If connecting a PC with an HDMI terminal, use an HDMI cable
(type A connector). A separate analogue cable is not
necessary.
the back of your television
Computer
Audio cable for PC to
television connection
(not supplied)
in the
HDMI-to-DVI
adaptor cable
Conversion adaptor if
(not supplied)
required
To use a PC, set the monitor output resolution on the PC before
connecting it to the television. For acceptable PC signal
formats, see page 75.
To display the optimum picture, use the PC setting feature (see
page 62).
NOTE:
• The PC audio input terminal on the television is shared with
the HDMI 2 analogue audio input terminal (see page 64).
• Some PC models cannot be connected to this television.
• An adaptor is not needed for computers with a compatible
mini D-sub15-pin terminal.
• Depending on the DVD’s title and the specifications of the PC
on which you are playing the DVD-Video, some scenes may
be skipped or you may not be able to pause during multiangle scenes.
For acceptable PC and video signal formats, see page 76.
NOTE:
• The edges of the images may be hidden.
• If connecting a certain PC model with a unique PC signal, the
PC signal may not be detected correctly.
12
CONNECTING YOUR TV
English
Connecting a home network
The LAN port allows your Toshiba TV to connect to
your home network. You can use this revolutionary
home entertainment networking system to access
photo, video and audio files that are stored on a
DLNA CERTIFIED™ server and play/display them on
your TV.
NOTE:
• If you connect to a shared network outside your home, it is
advisable to use a router. Always use DLNA CERTIFIED™
products in private network environments.
• If you use a hub or switch to connect the TV to your home
network, you may not be able to use the automatic setup
and will have to manually set up the network address. See
page 37.
• If you use a router with built-in DHCP functionality, use the
automatic setup. Manual setup may not work.
• If you connect the TV and PC directly, use a crossover LAN
cable.
To connect the TV to a home network -
Wired
the back of your television
Modem (if available)
Router with hub
To connect the TV to a home network with
an internet connection - Wireless
Please refer to “Wireless Setup” section on page 34.
the back of your television
TOSHIBA Dual
Band WLAN adaptor
Access point (AP)
Wireless LAN router
Modem
PC
[2][1]
Cable or
Phone jack
Server PC
[1] Coaxial or telephone cable (depending on your modem type)
[2] Standard LAN cable
[3] Do NOT connect a phone jack directly to the TV’s LAN port.
[2]
[2][3]
13
CONNECTING YOUR TV
Controls and input connections
English
A wide variety of external equipment can be connected to the input sockets on the side of the television.
Whilst all the necessary adjustments and controls for the television are made using the remote control, the
buttons on the television may be used for some functions.
USB 1 Media Player
POWER switch
(Full Power Down Option)
GREEN LED – On Timer set
Ambient Light Sensor
ORANGE LED – Programme timer set
digital
only)
(
RED LED – Programme timer Active
digital
only)
(
Switching on
If the RED LED is not lit, check that the mains plug is connected
to the power supply and push the
left side of the television to switch the television on. If the
picture does not appear, press
take a few moments. The BLUE LED will be lit.
To put the television into Standby, press
control. To view the television, press
take a few seconds to appear.
For energy saving:
We recommend that you use the television with the factory
settings. The factory settings are for energy saving.
Turning the television off at its mains supply, or un-plugging
it, will cut energy use to nearly zero for all televisions. This is
recommended when the television is not being used for a
long time, e.g. when on holiday.
Reducing the brightness of the screen will reduce energy use.
Energy efficiency cuts energy consumption and thus saves
money by reducing electricity bills.
NOTE:
Putting the television into standby mode will reduce
energy consumption, but will still draw some power.
!
(POWER) button on the
1
on the remote control; it may
1
on the remote
1
again. The picture may
Using the remote control
MENU
Press
The menu appears as a list of five topics. As each symbol is
selected by pressing
respective options will appear below.
on the remote control to display the menu.
C
or c on the remote control, its
NOTE:
The same menu is displayed in DTV (Digital TV) and
ATV (Analogue TV) modes; however, where some items are not
available in a mode, they will appear greyed out.
To use the option, press
move up and down and press
setting. Follow the on-screen instructions. The functions of
each menu are described in detail throughout the manual.
Using the controls and connections
To alter the volume gently touch –
To alter the programme position touch
MENU
Touch
picture options.
Touch
The Media Player feature provides access to photo, movie and
music files stored on a USB storage device that is connected via
USB 1 (USB 2 provides access to photos only).
NOTE:
take no responsibility for damage to other connected equipment.
The USB 2 socket has to be used with the “TOSHIBA Dual Band
WLAN Adaptor WLM-10U2” in order to access a wireless
network.
You must use the TOSHIBA Wireless LAN device to ensure
correct operation of this feature. This feature is available only
when the “TOSHIBA Dual Band WLAN Adaptor“ is used.
To select an external input, press
source is selected.
Please always refer to the owner’s manual of the equipment to
be connected for full details.
and – 2 + or b p B to control the sound and
MENU
to finish.
The USB socket has limited functionality and Toshiba can
USB 2 Wireless LAN adaptor
ready for a home network
COMMON INTERFACE
The Common Interface is for a Conditional
Access Module (CAM).
Contact a service provider.
The software updating of CI Plus CAM
may be automatically executed. At this
time, your Recording/Reminder
programming will be canceled.
Control panel (touch sensor)
RED LED – Standby
BLUE LED – Power on
B
and b on the remote control to
C
or c to select your desired
2
+.
b p B
.
o
until the appropriate input
14
SETTING UP YOUR TV
English
Startup Application
Before switching on the television, put your decoder
and media recorder, if applicable, to
To set up the television, use the buttons on the
remote control as detailed on page 7.
Quick Setup
a
Press the 1 button. The
appear. This screen will appear the first time that the
television is switched on and each time
selected.
b
Press B, b, C, or c to select the menu language, and
then press
c
Highlight
is now set to tune the stations for your country.
NOTE:
•The following display menus will differ slightly
•If there is not a country that you want to select in the
d
Press OK, and the
e
Press C or c to select
home use, select
f
Press OK. If
confirmation window will appear. If you select
from that window, the TV will proceed to the
Demo
OK
Country
Quick Setup
Country
Primary Subtitle Language
Secondary Subtitle Language
Primary Audio Language
Secondary Audio Language
according to the country you selected.
Others
list, select
Location
To use the TV for displaying in a store showroom, please
select [Store]. [Home] mode is recommended for normal
use.
Store
setup screen.
Menu Language
.
and
C
or c to select. The television
.
Location
Home
Home
Home
.
is s elected in step 5 , a
Standby
screen will
Reset TV
UK
English
English
English
English
screen will appear.
or
Store
. For normal
Store mode
Auto
Yes
.
is
g
Press OK, and the
press
C
or c to select
TV Mounting
If you are mounting the TV on a wall please select [Wall].
[Stand] is recommended for other uses.
This setting may be modified later under Sound Navi in the
SOUND menu.
h
Press OK, and the
C
or c to select
AutoView
AutoView mode automatically adjusts picture settings
to suit ambient light conditions.
Do you wish to enable AutoView mode?
i
Press OK. If the
or
b
to select
to check ( ).
j
Select
Next
screen will appear with the option to select between
DTV and ATV, DTV
to select the appropriate mode.
k
Press B or b to highlight
The television will start to search for available
and/or
ATV
the scan status.
You must allow the television to complete the search.
Auto Tuning
DTV Tune 3% 2
ATV Tune Waiting...
When the search is complete, the television will
automatically select position one.
The
Auto Tuning
of services found.
TV Mounting
AutoView
Yes
or No.
Ant/Cable
Antenna
Ant / Cable
Antenna
Cable
and press OK. The
or
channels. The progress bar will indicate
Progress Found
Channel: C7
screen will display the total number
screen will appear,
Stand
or
Wall
Stand
screen will appear, press
No
screen appears, press B
or
Cable
, and then press OK
Next
Auto Tuning
ATV
if available. Use C or c
Start Scan
, and then press OK.
.
start up
DTV
15
l
Press C or c to view the
(analogue channel) lists.
DTV
(digital channel) or
ATV
SETTING UP YOUR TV
m
English
Use B or b to move through the list to select a
channel, and then press
In
ATV
mode, some areas may receive duplicate
stations. There may not be a clear picture or the signal
may be weak, so the station order can be changed
using
ATV Manual Tuning
REMEMBER:
ATV
available) modes.
NOTE:
transmission but can be advanced or decreased by
using
PLEASE NOTE
The
time from the
Press TV at any time to select between
and
DTV
(DTV TV/DTV RADIO/DTV TEXT if
The time will be set automatically by
Local Time Setting
Quick Setup
OK
to view.
.
in the
DTV Settings
menu can also be accessed at any
SETUP
menu.
Ant/Cable In (if available)
From this menu, you can set the RF input configuration to cable.
a
Press
MENU
, and select
b
Use b to highlight
select
Antenna
NOTE:
When you attempt to change the
setting, a warning message will appear followed by
In
PIN entry (if PIN has been set) and a prompt for
Tuning
.
SETUP
Ant/Cable In
or
Cable
menu.
and use C or c to
.
Ant/Cable
screen.
Auto
With the exception of
items, all of the following items will have 2 operating modes.
The first is
the system. The second is an
able to enter a single value in place of the pre-set value. If no
channel is currently tuned and the
system default value will be shown. However, if a channel is
currently tuned when the item is accessed, the value of the
current channel will be displayed.
Auto
DTV Scan Type
where the values for each item are preset by
and
DTV Modulation
Input
mode where you will be
Input
state is chosen, a
DTV Scan Type:
This item determines whether a
be executed.
Quick Scan
The
designed to complete in less time.
is a simplified version of the
Quick Scan
or a
Full Scan
Full Scan
will
that is
DTV Start Frequency:
This sets the frequency from which the scan will begin.
DTV End Frequency:
This sets the frequency at which the scan will end.
DTV Modulation:
You can choose from five QAM modulation settings.
DTV Symbol Rate:
This is the baud rate (KS/s) of the scan.
DTV Network ID:
This is the Network ID to be utilized for the scan. This item is
greyed out when DTV Scan Type is set to “Full Scan”.
c
When
Ant/Cable In
setting options will be provided in the
screen.
Press
B
or b to select an item, and then press C or c
to select your desired option.
Auto Tuning
DTV
Start Scan
is set to
DTV and ATVTuning Mode
Cable
Quick ScanScan Type
AutoStart Frequency
AutoEnd Frequency
AutoModulation
AutoSymbol Rate
AutoNetwork ID
, the following
Auto Tuning
16
SETTING UP YOUR TV
English
Auto Tuning
NOTE:
As new services are broadcast, it will be necessary to
re-tune the television in order to view them.
Auto Tuning
used to update the channel list.
Tuning is run periodically to ensure that all new services
are added
a
b
will completely re-tune the television and can be
. All current channels and settings, i.e. locked
Press
MENU
Use
b
to highlight
SETUP
Menu Language English
Country
Ant/Cable In
Auto Tuning
ATV Manual Tuning
DTV Manual Tuning
DTV Settings
Quick Setup
A screen will appear warning that previous
programmes and settings will be deleted.
Auto Tuning
Previous settings will be lost!
Press EXIT for no change.
C
or c to select
Use
available, then highlight
continue with the
NOTE:
If you have selected "
field in the
other than "
broadcasting system (B/G, I, D/K or L).
The television will start to search for all available DTV
and/or ATV services.
You must allow the television to complete the
search.
When the search is complete, the
will display the services found.
SETUP
DTV
It is re com mended that Aut o
channels, will be lost.
and use C or c to select
Auto Tuning
DTV and ATVTuning Mode
Start Scan
DTV and ATV, DTV
Start Scan
Auto Tuning
menu, and selected a tuning mode
" , choose the optimum ATV
. Press OK.
Antenna
.
Others
Auto Tuning
SETUP
UK
and press OK to
" for the
or
menu.
ATV
, if
Country
screen
ATV Manual Tuning
Tuning
The television can be tuned-in manually using
Tuning
. For example, you might use the feature if the television
cannot be connected to a media record er/decoder with a SCART
lead or when you want to tune-in a station on another
Use
C
and
c t
ATV Manual Tuning options
settings
o move across the screen and select any of the
.
ATV Manual Tuning
System
1 A C 2 0 V C R
I
.
Then use B or b to adjust the
123 4 65 7 8 9
1
Position
The number to be pressed on the remote control to tune
the channel.
2
System
Specific to certain areas.
3
Colour System
Factory set to Auto, should only be changed if problems
are experienced, i.e. NTSC input from external source.
4
Skip
Set Skip to On (8) or Off (() for the selected channel.
See page 19
5
Signal Class
The channel classification.
6
Channel
The channel number on which a station is being broadcast.
7
Search
Search up and down for a signal.
8
Manual Fine Tuning
Only used if interference/weak signal is experienced. See
page 70.
9
Station
Station identification. Use the B or b and C or c buttons
to enter up to seven characters.
To allocate a position on the television for a decoder and
media recorder: turn the decoder on, insert a pre-recorded
film in the media recorder, press PLAY, and then manually
tune.
ATV Manual
System
.
c
Use b or B to move through the list to select a
channel, and then press
OK
to view.
17
SETTING UP YOUR TV
a
Press
English
b
MENU
menu. Press
press
OK
SETUP
Menu Language English
Country
Ant/Cable In
Auto Tuning
ATV Manual Tuning
DTV Manual Tuning
DTV Settings
Quick Setup
Use B or b to highlight the desired position. We
suggest
ATV Manual Tuning
Pos. Channel Station
1
2
3
4
5
6
7
8
Different
and use C or c to select the
b
to highlight
to select.
Pos. 0
for a media recorder.
C2
S10
C7
S40
C22
C25
C28
C30
Channel
ATV Manual Tuning
numbers may be displayed.
UK
Antenna
SETUP
and
g
Each signal will show on the television. If it is not your
media recorder, press
search.
h
When your media recorder signal is found, press c to
move along to
the required characters,
ATV Manual Tuning
Station
1 A C 2 0 V C R I
i
Press OK to save.
j
Repeat for each
RETURN
to return to the list of channels and select the
next number to tune.
k
Press
EXIT
when you have finished.
PLEASE NOTE
This television has direct channel entry if the channel
numbers are known.
ATV Manual Tuning
Select the
Position number
Enter the
standard (terrestrial) channels or
channels and the
save.
B
or b again to restart the
Station
. Use B, b, C and c to put in
e.g. VCR
.
position
you want to tune, or press
screen in
, the
System
S
Channel
for cable
number. Press OK to
Step 3
, then C for
.
c
Press OK to select. If the channel chosen for the media
recorder is set to skip, Skip should be removed before
storing.
d
Press c to select
required.
ATV Manual Tuning
System
1 A C 2 0
e
Then press c to select
f
Press B or b to begin the search. The search symbol
will flash.
ATV Manual Tuning
Search
1 C 2 0 IA
System
and use B or b to change if
I
Search
.
18
SETTING UP YOUR TV
English
Skip
To prevent certain channels from being viewed, positions can be
a
Select
ATV Manual Tuning
b
Use B or b to highlight the position to be skipped and
press
OK
ATV Manual Tuning
Pos. Channel Station
1
2
3
4
5
6
7
8
c
Press c to select
d
Use B or b to turn
Press
OK
8
on the screen indicates a skipped position.
ATV Manual Tuning
Skip: On
1 A C 2 0 I
e
Press
RETURN
Each position has to be
Skip
off, repeat the procedure for each position.
Skipped positions
or by the controls on the television but
accessed by the number buttons on the remote
control.
skipped.
from the
to select.
C2
S10
C7
S40 ABC1
C25
C28
C30
Skip
.
Skip
.
on.
and repeat from
individually
cannot
be selected by
SETUP
ABC1C22
Step 2
or press
selected. To turn
PU and
can
still be
menu.
EXIT
Pu
Sorting positions
Channels may be moved and saved to the position of your
a
Select
ATV Manual Tuning
b
With the list of channels showing, use B or b to
highlight the channel you want to move and press
ATV Manual Tuning
Pos. Channel Station
2
3
4
5
1
6
7
8
c
Use B or b to move through the list to your preferred
position. As you do so, the other channels will move to
make room.
d
Press C to save your move.
Repeat as necessary, and then press
.
choice.
from the
S10
C7
C40
C22
C2
C25
C28
C30
ABC1
ABC1
EXIT
SETUP
.
menu.
c
.
19
SETTING UP YOUR TV
DTV Manual Tuning
English
NOTE:
This feature varies depending on the
setting.
Manual Tuning
This feature is available for service engineers or can be
used for direct channel entry if the multiplex channel
a
Select
DTV Manual Tuning
and press
DTV Manual Tuning
Signal Strength
Quality
Channel
b
Enter the multiplex number using the number buttons
or use
C
c
Highlight
television will automatically search for that multiplex.
DTV Manual Tuning
Pos.New TypeName
40
51
When the multiplex is found, any channels that are not
currently in the channel list will be added and the
channel information at the top of the screen will be
updated.
d
Repeat as necessary. Press
Manual Tuning for DVB-C
When
Ant/Cable In
items are as follows:
Frequency
Modulation
options
Symbol Rate
the manual scan
– input a specific frequency to be scanned
– choose from one of five QAM modulation
– input a specific baud rate (KS/s) to be used for
is known.
from the
OK
.
WEAK
GOOD
Start Scan
or c to adjust the number up or down.
Start Scan
1
2
7
, and then press OK. The
0 New Channels - Total 6
ABC ONE
ABC TWO
ABC THREE
ABC NEWS 24
ABCi
EXIT
to finish.
is set to
Cable, DTV Manual Tuning
Ant/Cable In
SETUP
menu
STRONGAVERAGE
13
DTV Settings
The channel order may be changed to suit your personal
a
b
c
Channels
preference.
Select
DTV Settings
OK
.
Select
Channels
DTV Settings
Channels
Subtitle and Audio
PIN Setting
Parental Control
Local Time Setting
Standby Channel Update
DVB Character Set
Dynamic Scan
For your convenience, you can jump to specific places
in the list by one of two methods.
Channels
Line No. 1/10
Pos. Name
1 ABC ONE
2 ABC TWO
7 ABC THREE
30 CABC Channel
40 ABC NEWS 24
51 ABCi
822 AA
823 AC
Line Number Jump
(0-9) to input the line number you want to select, and
then press
Station Letter Jump
to the next station name with a different initial letter.
It is also possible to change the Position number of a
particular channel.
Renumber
highlighted channel. Edit the channel number using
the
number buttons
Pos.
----
and press OK.
OK
.
— Press the
from the
SETUP
menu and press
Off
Standard
On
—Use the
number buttons
—Press CC or cc to jump
RED
button to renumber the
and press OK.
Name
ABC ONE
TV
20
Move
—Press the
Move
feature. Use the B or b buttons to select the
channel you wish to move and press
If you wish to move multiple channels at once, select
another channel and check in the same way. Repeat as
necessary.
Once all desired channels have been checked, use the
B
or b buttons to place the focus at the position to
which you wish to move the channels. The channels
will be inserted above the highlighted channel. Press
the
GREEN
GREEN
button to activate the
OK
button to execute the move.
to check.
SETTING UP YOUR TV
DVB Character Set
This feature allows you to manually select the character set
Standard
(
a
b
= Table 0,
to be used for DVB-C or DVB-T channels.
Select
OK
.
Press b to select
to select
West
DTV Settings
DVB Character Set
Standard, West
= Table 5 or
from the
SETUP
or
Latin alphabet 9
Latin alphabet 9
menu and press
and use C or c
English
)
.
Channels
Line No. 1/10
Pos. Name
1 ABC ONE
2 ABC TWO
7 ABC THREE
30 CABC Channel
40 ABC NEWS 24
51 ABCi
822 AA
823 AC
Sort
—Press the
window will appear. Press
press
OK
Sort
Your existing channel order will be lost. Do you wish to
continue?
Sorting Type
The
Sort
Sorting Type A - Z
Press
C
A - Z
Channel Number
b
Press
YELLOW
button. A confirmation
C
.
selection window will appear.
or c to set the sorting type.
to highlight
or c to select
Yes
Sort
Station name order (A to Z)
Position No. order (numerical
sequence)
Sort
and press OK.
Yes
TV
and
Standby Channel Update
If the
Standby Channel Update
standby mode, Digital Tuning is automatically executed and any
a
Select
OK
new channels are saved.
DTV Settings
.
is set to On, when the TV is in
from the
SETUP
menu and press
Dynamic Scan
If the broadcast information has changed in your DVB-T
receiving area, the TV screen will display the message
Broadcast information has changed. Would you like to
“
rescan now?
for the TV to detect changes and prompt you to rescan, you
a
b
”. Please follow the message. If you do not wish
Off
should set this feature to "
Select
DTV Settings
OK
.
Press b to select
select
On
.
from the
Dynamic Scan
".
SETUP
menu and press
and use C or c to
Location setting
You can select either
recommended for normal home use. Select
the television for displaying in a shop, etc.
a
Select
Location
b
Press C or c to select
digital
This is a
digital
of both
lifetime of this set it is very likely that
be switched off to allow for more new
This ‘switch-off’ will happen in a number of phases, which will
be advertised in your area well in advance. It is recommended
that at each phase the television is re-tuned to ensure that
existing and new
disruption.
and
Home
or
Store
mode.
Home
when using
.
services will
services.
is
Store
from the
SETUP
menu.
Home
or
Store
Analogue
television which is integrated to allow the use
analogue
digital
switch-off
services. However, during the
analogue
digital
services can be viewed without
b
Press b to select
C
or c to select On.
Standby Channel Update
and use
21
CONTROLS AND FEATURES
General controls
English
Quick Menu
Quick Menu
Picture Mode, Picture Size, More Information, Sleep
Timer
Press
select the option.
Quick Menu
Picture Mode AutoView
Picture Size
More Information
Channel Options
BBC iPlayer
YouTube
Media Player
Photo Frame
Sleep Timer
Speakers
Wireless Information
NOTE: Quick Menu
current mode.
Quick menu item example
When viewing a TV
programme or
pictures from the
external input
When using EPG Genre Colour See page 57.
Media Player (Multi
View, List View)
Photo Frame PICTURE See page 27.
helps you access some options quickly, such as
etc.
QUICK
to display the
Mode Quick menu item Description
Quick Menu
items are different depending on the
Picture Mode See page 27.
Picture Size See page 25.
More Information See page 56.
Channel Options See page 58.
BBC iPlayer See page 41.
YouTube See page 41.
Media Player See page 44.
Photo Frame See page 51.
Sleep Timer See page 54.
Speakers See page 66.
Wireless Information See page 36.
EPG Update/
Cancel EPG Update
Sort Page 46 - 50
Interval Time Page 46 - 50
Repeat Page 46 - 50
Device Information Page 46 - 50
Wireless Information See page 36.
and use B or b to
Super Live
00:00
TV Speakers
See page 56.
Selecting positions
To select a position, use the numbered buttons on the remote
control.
PU and
Positions can also be selected using
To display on-screen information such as position, input mode
or stereo/mono signal, press . Press again to cancel.
The Time Display –
The time display facility allows the current (text service) time to
Press
see the time display from the broadcaster. It will remain on
screen for about 5 seconds.
NOTE:
be seen on the television screen.
D
whilst watching a normal television broadcast to
This display may not be available in some cases.
analogue
Pu.
only
Stereo and Bilingual transmissions
For ATV programmes
If stereo or dual language broadcasts are transmitted, the word
Stereo or Dual will appear on the screen each time positions are
changed, disappearing after a few seconds. If the broadcast is
not in stereo, the word Mono will appear.
Stereo…
Press s to select
Bilingual…
transmitted, the word
required programme number, and if the word
press
Bilingual transmissions are rare. If they are
s
to select
For DTV programmes
For stereo or dual mono broadcasts, press s and use C or
c
to select settings.
Mode Display Pressing
Stereo Stereo S Left S Right
Dual mono Dual 1
Mono –
Multichannel –
For multi-audio track broadcasts, press
change the audio language (see ‘Audio language’ on
page 59).
Stereo
or
Mono
Dual
will be displayed. Choose the
Dual 1, Dual 2
S
or
Mono
Dual 2
s
.
Dual
appears,
.
c
repeatedly to
22
CONTROLS AND FEATURES
English
Sound controls
Volume controls and mute sound
Volume
Press y or Y to adjust the volume.
Sound Mute
Press once to turn the sound off and again to cancel.
Dual
If a programme or film is being broadcast with a soundtrack in
more than one language, the
a
Press
MENU
b
Press b to highlight
choose between
SOUND
Dual
Balance
Advanced Sound Settings
Dolby Volume Low
Dynamic Range Control Off
Audio Level Offset
Audio Description
The sound controls are accessible in
a
Select the
SOUND
b
Press b to highlight
to emphasize left or right speaker balance.
DUAL
between them.
and C or c to select the
Dual 1
feature allows selection
Dual
, and then press C or c to
or
Dual 2
.
0
Balance
digital
modes.
menu.
Balance
, and then press C or c
SOUND
Dual 1
and
menu.
analogue
Sound Navi
You can customize current sound mode settings. Select the
appropriate mode in accordance with the installation location of
Stand
or
Wall
the TV (
a
Select the
b
Press b to highlight
then press
c
Press b to highlight
Advanced Sound Settings
Sound Navi
Surround Off
Voice Enhancement On
Dynamic Bass Boost High
d
Press C or c to select either
on how your TV is installed, and then press the RED
button.
e
Press C or c to select the frequency range you want to
adjust from the equalizer window, and then press
b
to adjust the level.
Sound Navi
TV Mounting Stand
+20
f
-20
Repeat step 5 for other frequencies.
) and adjust the equalizer on-screen as
desired.
SOUND
menu.
Advanced Sound Settings
OK
.
Sound Navi
Equalizer
0
100 330 1K 3.3K 10K [Hz]
2 1 0 1 2 [Level]
, and then press OK.
Stand
or
Wall
, and
depending
B
or
23
CONTROLS AND FEATURES
English
Surround, Voice Enhancement
help to create an enhanced surround sound experience with
deep, rich bass from stereo sound sources. Your TV’s audio will
a
b
c
d
This feature provides a consistent sound volume regardless of
a
b
NOTE:
•The
Dolby Volume
Control
Dynamic Range Control
•If
disabled.
Surround Settings
, and
Dynamic Bass Boost
sound fuller, richer, and wider.
In the
SOUND
Sound Settings
Press b to highlight
to select
Advanced Sound Settings
Sound Navi
Surround Off
Voice Enhancement On
Dynamic Bass Boost High
Press b to highlight
press
Press b to highlight
C
or c select the desired bass expansion level (
Low
programmes, channels or input sources.
In the
Volume
Press C or c to select
and
menu, press b to highlight
, and then press OK.
Off, Spatial
C
or c to select On.
or
High
Surround
or
Voice Enhancement
Dynamic Bass Boost
).
Dolby Volume
SOUND
menu, press b to highlight
.
setting influences the
Digital Audio Output
is set to On, this feature will be
, and then press C or c
Cinema
.
®
Low, High
or
settings.
Off
.
Dynamic Range
Advanced
, and then
and using
Dolby
Dynamic Range Control
This feature allows control of audio compression for some
digital TV programmes (MPEG-1 and MPEG-2 audio
programmes are not supported).
a
In the
SOUND
Range Control
b
Press C or c to select On or
NOTE:
This feature is disabled when
Low
or
High
.
menu, press b to highlight
.
Off
.
Dolby Volume
Dynamic
is set to
Off,
Audio Level Offset
Sometimes there can be large changes in volume when
switching from a DTV 5.1ch to a DTV 2ch, an ATV channel, or
an external input. Using the
a
b
c
d
NOTE:
• The available item changes depending on the current input
source. For example, while watching a DTV 2ch programme,
only
greyed out in the menu. This allows you to easily adjust
according to each condition.
• When watching a DTV 5.1ch programme, this feature is not
available.
reduces these volume differences.
Set the volume level usually used when watching a
DTV 5.1ch programme.
Tune to a channel which is DTV 2ch, ATV or an external
input.
In the
SOUND
Level Offset
Press b to highlight an option, and then use C or c
to adjust the volume level.
Audio Level Offset
DTV 2ch
ATV
External Input
DTV 2ch
is available and the other two items are
Audio Level Offset
menu, press b to highlight
and press OK.
-5
0
0
Audio Description
Audio Description is an additional narrative sound track for
visually impaired individuals to understand and enjoy the story
line more fully. The letters AD will be displayed in the channel
banner when programmes contain AD content.
a
In the
SOUND
press
b
Highlight
to select
Audio Description
Audio Description
Mixing Level
AD
The
toggle the
and Off.
c
To adjust the level of the audio description sound to
the main sound, highlight
c
.
menu, select
OK
.
Audio Description
On
.
button on the Remote can also be used to
Audio Description
Audio Description
, and then press C or c
On
50
feature between On
Mixing Level
feature
Audio
and
and use C or
24
Loading...