Toshiba 46G300U1, 46G30U1, 40G300U1, 40G30U1 User Manual

Download

4046G300U1EN-A5-Cover-03.pdf12010/3/2下午02:01:06

Owner’s Manual

Integrated High Deﬁnition LCD Television

HIGH-DEFINITION TELEVISION

CMY

40G300U1 40G30U1 46G300U1 46G30U1

For an overview of steps for setting up your new TV, see page 10.

Note: To display a High Deﬁnition picture, the TV must be receiving a High Deﬁnition signal (such as an over-the-air High Deﬁnition TV broadcast, a High Deﬁnition digital cable program, or a High Deﬁnition digital satellite program). For details, please contact your TV antenna installer, cable provider, or satellite provider.

Owner’s Record

The model number and serial number are on the back of yo

ur TV. Record these numbers in the spaces below. Refer to these numbers whenever you communicate with your Toshiba dealer about this TV.

Model number:

Serial number:

HDA51D4600I

Dear Customer,

Thank you for purchasing this Toshiba LCD TV. This manual will help you use the many exciting features of your new LCD TV. Before operating your LCD TV, please read this manual completely, and keep it nearby for future reference.

Safety Precautions

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

WARNING

RISK OF ELECTRIC

SHOCK DO NOT OPEN.

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING

To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. See item 25 on page 4.

WARNING:

If you decide to wall mount this television, always use a UL Listed wall bracket appropriate for the size and weight of this television. The use of any wall bracket other than a UL Listed wall bracket appropriate for the size and weight of this television for wall mounting this television could result in serious bodily injury and/or property damage. See “Removing the Pedestal Stand” ( page 6).

NOTE TO CATV INSTALLERS

This is a reminder to call the CATV system installer’s attention to Article 820-40 of the U.S. NEC, which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. For additional antenna grounding information, see items 32 and 33 on page 4.

CHILD SAFETY:

It Makes A Difference How and Where You Use Your Flat Panel Display

Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind:

The Issue

• The home theater entertainment experience is a growing trend and larger flat panel displays are popular purchases. However, flat panel displays are not always supported on the proper stands or installed according to the manufacturer’s recommendations.

Tune Into Safety

•

One size does NOT fit all. Follow the manufacturer’s recommendations for the safe installation and use of your flat panel display.

• Carefully read and understand all enclosed instructions for proper use of this product.

• Don’t allow children to climb on or play with furniture and television sets.

• Don’t place flat panel displays on furniture that can easily be used as steps, such as a chest of drawers.

• Remember that children can become excited while watching a program, especially on a “larger than life” flat panel display. Care should be taken to place or install the display where it cannot be pushed, pulled over, or knocked down.

• Care should be taken to route all cords and cables connected to the flat panel display so that they cannot be pulled or grabbed by curious children.

Wall Mounting: If you decide to wall mount your flat panel display, always:

• Use a mount that has been recommended by the display manufacturer and/or listed by an independent laboratory (such as UL, CSA, ETL).

• Follow all instructions supplied by the display and wall mount manufacturers.

• If you have any doubts about your ability to safely install your flat panel display, contact your retailer about professional installation.

• Make sure that the wall where you are mounting the display is appropriate. Some wall mounts are not designed to be mounted to walls with steel studs or old cinder block construction. If you are unsure, contact a professional installer.

• A minimum of two people are required for installation. Flat panel displays can be heavy.

• Flat panel displays that are inappropriately situated on dressers,

bookcases, shelves, desks,

speakers, chests or carts may fall over and cause injury.

TOSHIBA Cares!

• The consumer electronics industry is committed to making home

entertainment enjoyable and safe.

40_46G300U1_EN-A5.indb 2 2010/3/2 上午 11:32:24

Important Safety Instructions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

Do not defeat the safety purpose of the polarized or grounding type plug. A polarized

plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on

or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11) Only use attachments/accessories specified by the

manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is

used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Wide blade

Additional Safety Precautions

14a) CAUTION:

enclosure surface has been damaged or the TV does not operate normally, take the following precautions:

•

If the TV is dropped and the cabinet or

ALWAYS turn off the TV and unplug the power cord to avoid possible electric shock or fire. NEVER allow your body to come in contact with any

broken glass or liquid from the damaged television. The LCD panel inside the TV contains glass and a toxic liquid. If the liquid comes in contact with your mouth or eyes, or your skin is cut by broken glass, rinse the affected area thoroughly with water and consult your doctor. ALWAYS contact a service technician to inspect the TV

• any time it has been damaged or dropped.

15) CAUTION:

To reduce the risk of electric shock, do not

• use the polarized plug with an extension cord,

receptacle, or other outlet unless the blades can be inserted completely to prevent blade exposure.

To prevent electric shock, match wide blade of plug

• to wide slot; fully insert.

16) CAUTION: Do not let children swallow the product or play with the plastic bag. Keep the product and the plastic bag out of the reach of children.

17) CAUTION

) WARNING

Do not let water or other liquids come into contact with the product, as it may result in damage.

To prevent the spread of fire, keep candles or other

•

open flames away from this product at all times. Keep the product away from direct sunlight, fire or

•

a heat source such as a heater. This may reduce the product lifetime or result in fire.

Installation, Care, and Service

Installation

Follow these recommendations and precautions and heed all warnings when installing your TV:

19) WARNING: NEVER expose batteries

to excessive heat such as sunshine, fire or the like.

) ALWAYS plug the product into an outlet that is

located in such a manner that it can be easily unplugged in case the product requires service.

) NEVER route the product’s power cord inside a wall

or similar enclosed area.

22) Never modify this equipment. Changes or modifications may void: a) the warranty, and b) the user’s authority to operate this equipment under the rules of the Federal Communications Commission.

) DANGER: RISK OF SERIOUS PERSONAL

Never place the TV on an unstable cart, stand, or table. The TV may fall, causing serious personal injury, death, or serious damage to the TV.

INJURY, DEATH, OR EQUIPMENT DAMAGE!

(continued)

40_46G300U1_EN-A5.indb 3 2010/3/2 上午 11:32:25

pot VTedis VT

) To avoid damage to this product, never place or store

the TV in direct sunlight; hot, humid areas; or areas subject to excessive dust or vibration.

25) Always place the TV on the floor or a sturdy, level, stable surface that can support the weight of the unit. To secure the TV, use a sturdy strap from the hook(s) on the rear of the TV to a wall stud, pillar, or other immovable structure. Make sure the strap is tight, secure, and parallel to the floor.

Sturdy strap (as short as possible)

min.

Hook

33)

Use extreme care to make sure you are never in

•

DANGER: RISK OF SERIOUS

PERSONAL INJURY OR DEATH!

a position where your body (or any item you are in contact with, such as a ladder or screwdriver) can accidentally touch overhead power lines. Never locate the antenna near overhead power lines or other electrical circuits. Never attempt to install any of the following

• during lightning activity: a) an antenna system;

or b) cables, wires, or any home theater component connected to an antenna or phone system.

26) The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

27) Never block or cover the slots or openings in the TV cabinet back, bottom, and sides. Never place the TV:

on a bed, sofa, rug, or

•

similar surface; too close to drapes,

•

curtains, or walls; or

in a confined space such

•

as a bookcase, built-in cabinet, or any other place with poor ventilation.

The slots and openings are provided to protect the TV from overheating and to help maintain reliable operation of the TV. Leave a space of at least 4 (four) inches around the TV.

28) Always place the back of the television at least four (4) inches away from any vertical surface (such as a wall) to allow proper ventilation.

29) Never allow anything to rest on or roll over the power cord, and never place the TV where the power cord is subject to wear or abuse.

30) Never overload wall outlets and extension cords.

31) Always operate this equipment from a 120 VAC, 60 Hz power source only.

32) Always make sure the antenna system is properly grounded to provide adequate protection against voltage surges and built-up static charges (see Section 810 of the National Electric Code).

Antenna lead-in wire

Antenna discharge unit

Ground clamp

Electric service

equipment

Ground clamps

(NEC Section 810-20)

Grounding conductors (NEC Section 810-21)

Power service grounding electrode system (NEC Art 250 Part-H)

Care

For better performance and safer operation of your TOSHIBA TV, follow these recommendations and precautions:

34) If you use the TV in a room whose temperature is 32 °F (0 °C) or below, the picture brightness may vary until the LCD warms up. This is not a sign of malfunction.

35) Always unplug the TV before cleaning. Gently wipe the display panel surface (the TV screen) using a dry, soft cloth only (cotton, flannel, etc.). A hard cloth may damage the surface of the panel. Avoid contact with alcohol, thinner, benzene, acidic or alkaline solvent cleaners, abrasive cleaners, or chemical cloths, which may damage the surface. Never spray volatile compounds such as insecticide on the cabinet. Such products may damage or discolor the cabinet.

36)

Never spill liquids or push objects of any kind into the TV cabinet slots.

37) While it is thundering, do not touch the connecting cables or apparatus.

38) For added protection of your TV from lightning and power surges, always unplug the power cord and disconnect the antenna from the TV if you leave the TV unattended or unused for long periods of time.

39) ALWAYS unplug the TV to completely disconnect from mains power. When the TV is turned off using the on/off switch, it is not completely disconnected from power and a minute amount of current is still consumed.

WARNING:

RISK OF ELECTRIC SHOCK!

(continued)

40_46G300U1_EN-A5.indb 4 2010/3/2 上午 11:32:27

40)

During normal use, the TV may make occasional snapping or popping sounds. This is normal, especially when the unit is being turned on or off. If these sounds become frequent or continuous, unplug the power cord and contact a Toshiba Authorized Service Center.

41)

Never strike the screen with a sharp or heavy object.

42) • The LCD screen of this product can be damaged by

•

DANGER: RISK OF SERIOUS PERSONAL INJURY OR DEATH!

ultraviolet radiation from the sun. When selecting a location for the television, avoid locations where the screen may be exposed to direct sunlight, such as in front of a window.

Never touch, press, or place anything on the LCD screen. These actions will damage the LCD screen. If you need to clean the LCD screen, follow the instructions in item 35 on page 4.

Service

43)

Never attempt to service the TV yourself. Opening and removing the covers may expose you to dangerous voltage or other hazards. Failure to follow this WARNING may result in death or serious injury. Refer all servicing not specified in this manual to a Toshiba Authorized Service Center.

44) If you have the TV serviced: Ask the service technician to use only replacement

• parts specified by the manufacturer.

Upon completion of service, ask the service technician

• to perform routine safety checks to determine that the

TV is in safe operating condition.

45)

The cold cathode fluorescent lamp in the LCD panel contains a small amount of mercury.

When the TV reaches the end of its useful life, dispose of the used TV by the approved method for your area, or ask a qualified service technician to properly dispose of the TV.

environmental considerations. For disposal or recycling information, contact your local authorities or the Electronics Industries Alliance (www.eiae.org).

WARNING:

RISK OF ELECTRIC SHOCK!

Note: The lamp(s) inside this product contain mercury. Disposal may be regulated due to

Choosing a location for your LCD TV

To Display your LCD TV on the included Pedestal Stand:

Observe the following safety precautions:

1) Read and Follow the pedestal assembly instructions included with the pedestal.

CAUTION: Before beginning pedestal assembly, carefully lay the front of the LCD Panel face down on a flat, cushioned surface such as a quilt or blanket. Leave the bottom of the unit protruding over the edge of the surface and assemble the pedestal as indicated below.

Note: Extreme care should always be used when attaching the pedestal stand to avoid damage to the LCD panel.

2) Place the TV on a sturdy, level surface that can support the weight of the TV.

3) Be sure to secure the TV to a wall, pillar, surface, or other immovable structure. ( item 25, page 4).

To Display your LCD TV using a Wall Bracket:

If you decide to wall mount your LCD TV, always use a UL listed wall bracket appropriate for the size and weight of the LCD TV ( page 2):

1) CAUTION:

2) Unplug and remove any cables and/or other component connectors from the rear of the TV.

3) Remove the screws of the VESA Mounting Pattern show in the next page.

4) Always use the screws supplied or recommended by the wall mount manufacturer.

5) Follow the instructions provided with your wall bracket. Before proceeding, make sure the appropriate bracket(s) are attached to the wall and the back of the TV as described in the instructions provided with the wall bracket.

6) After attaching the appropriate bracket(s) to the wall and the back of the TV, remove the pedestal stand from the TV as described below.

Two people are required for installation.

(continued)

40_46G300U1_EN-A5.indb 5 2010/3/2 上午 11:32:27

7) VESA Mounting Pattern

TV Size Hole Pattern(HxV) Screw Size

40” 200x200 mm M6

46” 400x200 mm M8

(unit in mm)

Removing the Pedestal Stand

1) Carefully lay the front of the unit face down on a flat, cushioned surface such as a quilt or blanket. Leave the stand protruding over the edge of the surface.

Note: Extreme care should always be used when removing the pedestal stand to avoid damage to the LCD panel.

2) Remove the four screws shown in the right diagram. This will allow removal of the pedestal stand.

3) Once you have removed all four screws, holding the pedestal stand in place, remove the pedestal stand from the TV.

40” TV

VESA Mounting Pattern

46” TV

Four screws

VESA Mounting Pattern

Hook

Sturdy strap (as short as possible)

CAUTION: Always place the TV on the floor or a sturdy, level, stable surface that can support the weight of the unit. To secure the TV, use a sturdy strap from the hook(s) on the rear of the TV to a wall stud, pillar, or other immovable structure. Make sure the strap is tight, secure, and parallel to the floor.

Four screws

Hook

Sturdy strap (as short as possible)

40_46G300U1_EN-A5.indb 6 2010/3/2 上午 11:32:29

FCC Declaration of Conformity Compliance Statement (Part 15):

The

Toshiba 40G300U1, 40G30U1, 46G300U1, and

46G30U1 Televisions rules.

Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The party responsible for compliance to these rules is: Toshiba America Consumer Products, L.L.C. 82 Totowa Rd. Wayne, NJ 07470. Ph: 1-800-631-3811

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by removing and applying power to the equipment, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and

•

the receiver. Connect the equipment into an outlet on a circuit

•

different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV

•

technician for help.

Caution: Changes or modifications to this equipment not expressly approved by Toshiba could void the user’s authority to operate this equipment.

comply with Part 15 of the FCC

Important notes about your LCD TV

The following symptoms are technical limitations of LCD Display technology and are not an indication of malfunction; therefore, Toshiba is not responsible for perceived issues resulting from these symptoms.

1) An afterimage (ghost) may appear on the screen if a fixed, nonmoving image is displayed for a long period of time. The afterimage is not permanent and will disappear in a short period of time.

2) The LCD panel contained in this TV is manufactured using an extremely high level of precision technology; however, there may be an occasional pixel (dot of light) that does not operate properly (does not light, remains constantly lit, etc.). This is a structural property of LCD technology, is not a sign of malfunction, and is not covered under your warranty. Such pixels are not visible when the picture is viewed from a normal viewing distance.

Note: Interactive video games that involve shooting a “gun” type of joystick at an onscreen target may not work with this TV.

Trademark Information

QSound and [ ] symbol are trademarks of

•

QSound Labs, Inc. Manufactured under license from Dolby

•

Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

HDMI, the HDMI logo and High-Definition

•

Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

DLNA®, the DLNA Logo and DLNA CERTIFIED™

•

are trademarks, service marks, or certification marks of the Digital Living Network Alliance.

INSTAPORT™ and INSTAPORT logo are

•

trademarks of Silicon Image, Inc. in the United States and other countries.

MPEG Layer-3 audio coding technology

•

licensed from Fraunhofer IIS and Thomson.

40_46G300U1_EN-A5.indb 7 2010/3/2 上午 11:32:30

Contents

Important Safety Instructions ............................... 3

Installation, Care, and Service ............................. 3

Chapter 1: Introduction ...................................... 9

Features of your new TV ................................................................9

Overview of steps for installing, setting up,

and using your new TV .........................................................10

TV front and side panel controls and connections .......................11

TV back panel connections .......................................................... 12

Chapter 2: Connecting your TV ............................13

Overview of cable types ...............................................................13

About the connection illustrations ................................................ 13

Connecting a VCR and antenna, Cable TV or Camcorder ..........14

Connecting a DVD player with ColorStream®

(component video), a VCR, and a satellite receiver ............. 15

Connecting an HDMI® or DVI device to the HDMI input .......... 16

REGZA-LINK® connection .........................................................17

Connecting a digital audio system................................................18

Connecting a personal computer (PC) .........................................18

Connecting a home network .........................................................19

To connect the TV to a home network ..................................... 20

Chapter 3: Using the remote control ......................21

Preparing the remote control for use ............................................21

Installing the remote control batteries .......................................... 21

Remote control effective range .....................................................21

Learning about the remote control ............................................... 22

Using the remote control to control your other devices ...............23

Remote Control functional key chart ........................................... 24

Programming the remote control to control your other devices .. 25

Remote control codes ...................................................................26

Chapter 4: Menu layout and navigation ..................28

Main menu layout ......................................................................... 28

Setup/Installation menu layout .....................................................29

Navigating the menu system ........................................................ 29

Chapter 5: Setting up your TV ..............................30

Initial Setup ...................................................................................30

Selecting the menu language ........................................................30

TOSHIBA Logo LED ...................................................................30

Configuring the antenna input source for the ANT/CABLE

terminal ..................................................................................30

Programming channels into the TV’s channel memory ..............31

Programming channels automatically ......................................31

Setting channel skip ..................................................................31

Labeling channels ......................................................................... 32

Setting the HDMI® audio mode ................................................... 33

Viewing the digital signal meter ...................................................33

Setting the time zone ....................................................................33

Viewing the system status ............................................................. 34

Chapter 6: Using the TV’s features ........................35

Selecting the video input source to view ......................................35

Labeling the video input sources ..................................................35

Tuning channels ............................................................................36

Tuning channels using the

Channel Browser™ ....................................................... 36

Setting the Channel Tuning Mode ............................................38

Tuning to the next programmed channel .................................. 39

Tuning to a specific channel

(programmed or unprogrammed) .................................39

Switching between two channels using SurfLock™ ...............39

Selecting the picture size .............................................................. 39

Scrolling the TheaterWide® picture (TheaterWide 2 and 3 only) 41

Using the auto aspect ratio feature ............................................... 41

Using the FREEZE feature ...........................................................42

Adjusting the picture..................................................................... 42

Selecting the picture mode........................................................42

Adjusting the picture quality ....................................................43

Using the closed caption mode ..................................................... 43

Base closed captions ................................................................. 43

Digital CC Settings .................................................................. 44

CC Selector ............................................................................... 44

Adjusting the audio .......................................................................44

Muting the sound ......................................................................44

Using the digital audio selector ................................................ 44

Selecting stereo/SAP broadcasts ..............................................45

Adjusting the audio quality ....................................................... 45

Selecting the optical audio output format.................................45

Using the Dolby® Digital Dynamic Range Control feature ..... 46

Using the Locks menu ..................................................................46

Entering the PIN code ............................................................... 46

If you cannot remember your PIN code ...................................46

Changing your PIN code ..........................................................46

Blocking TV programs and movies

by rating (V-Chip) .........................................................46

Downloading an additional rating system for blocking TV

programs and movies .................................................... 47

Locking channels ......................................................................48

Unlocking programs temporarily ............................................. 49

Using the input lock feature ...................................................... 49

Using the GameTimer® ............................................................. 49

Using the control panel lock feature .........................................49

Using the PC settings feature ....................................................... 50

Setting the PC Audio .................................................................... 50

Using the Media Player ................................................................51

Using the Media Player with USB ........................................... 51

To select the Auto Start function ..............................................51

To open the Media Player ........................................................51

Viewing photo files .................................................................. 52

Single View ............................................................................... 52

Slideshow ..................................................................................52

Playing music files ....................................................................52

Viewing photo files with playing music files at same time ..... 53

Using a networked server PC .......................................................53

Using the Media Player with DLNA ........................................53

Viewing movie files ..................................................................54

Setting up the network address for the LAN port .......................55

Auto Setup.................................................................................56

Manual Setup ............................................................................56

Setting the sleep timer ..................................................................56

Using REGZA-LINK® ................................................................. 56

REGZA-LINK® playback device (DVD player, etc.) control 56

REGZA-LINK® input source selection ....................................57

VOLUME and MUTE controls of Audio Receiver ................. 57

Other REGZA-LINK® functions ..............................................57

Displaying TV status information ................................................58

Understanding the auto power off feature ....................................58

Understanding the last mode memory feature ............................. 58

Chapter 7: Using the TV’s advanced features ...........59

Using the advanced picture settings features ...............................59

Using Dynamic Contrast ..........................................................59

Using the static gamma feature ................................................59

Selecting the color temperature ............................................... 59

Selecting the cinema mode ...................................................... 60

Using the ClearFrame™ feature ............................................... 60

Using the Film Stabilization feature ......................................... 60

Using CableClear® digital noise reduction ............................... 60

Using MPEG noise reduction ................................................... 61

Using the Game Mode feature ..................................................61

Using the advanced audio settings features.................................. 61

Using the QSound® sound feature ............................................61

Chapter 8: Troubleshooting ................................62

General troubleshooting ............................................................... 62

Chapter 9: Appendix .........................................65

Specifications ................................................................................65

Acceptable signal formats for PC IN and HDMI terminals ........ 66

Limited United States Warranty for LCD Televisions .................67

Limited Canadian Warranty for Toshiba Brand Flat Panel

Televisions ............................................................................. 68

40_46G300U1_EN-A5.indb 8 2010/3/2 上午 11:32:31

Chapter 1: Introduction

Features of your new TV

The following are just a few of the many exciting features of your new Toshiba widescreen, integrated

HD, LCD TV:

Integrated digital tuning (8VSB ATSC and

•

QAM) eliminates the need for a separate digital converter set-top box (in most cases). 1080p output resolution.

•

Four HDMI® digital, high-definition multimedia

•

interfaces 1080p input support ( page 16).

HDMI new capability

•

INSTAPORT™ technology reduces lag time when

switching HDMI sources. One set of ColorStream® HD high-resolution

•

component video inputs ( page 15).

QSound® audio technologies ( page 61).

•

Digital Audio Out optical audio connection with

•

Dolby® Digital optical output format ( page 45).

CableClear® digital picture noise reduction (

•

page 60). PC IN (Analog RGB) computer terminal ( page

•

18-19). Channel Labeling allows you to put the Call

•

Letters (e.g. ABC, HBO, etc.) on the screen along with the station numbers, so you always know what you’re watching ( page 32). REGZA-LINK allows control of external devices

•

from the TV remote via HDMI connection( page 56).

ClearFrame™ 120 Hz anti-blur feature ( page

•

60). DLNA allows you to enjoy multimedia files from

•

your home network on your TV. Media Player allows you to view photo files and

•

to play music or movie files.( page 51).

40_46G300U1_EN-A5.indb 9 2010/3/2 上午 11:32:32

Chapter 1: Introduction

Overview of steps for installing, setting up, and using your new TV

Follow these steps to set up your TV and begin using its many exciting features.

Carefully read the important safety, installation,

care, and service information. Keep this manual for future reference.

Observe the following when choosing a location

for the TV:

Read “Important notes about your LCD TV”

•

( page 7). Place the TV on the floor or a sturdy, level,

•

stable surface that can support the weight of the unit. Secure the TV to a wall, pillar, or other immovable structure ( page 4). Place the TV in a location where light does not

•

reflect on the screen. Place the TV far enough from walls and other

•

objects to allow proper ventilation. Inadequate ventilation may cause overheating, which will damage the TV. THIS TYPE OF DAMAGE IS NOT COVERED UNDER THE TOSHIBA WARRANTY.

Do not plug in any power cords until AFTER you

have connected all cables and devices to your TV.

BEFORE connecting cables or devices to the TV, learn the functions of the TV’s connections and

controls ( pages 11–12).

Connect your other electronic device(s) to the TV ( pages 13–20).

Install the batteries in the remote control ( page

21).

See “Learning about the remote control” ( page

22) for an overview of the buttons on the remote control.

Program the remote control to operate your other device(s) ( pages 23–27).

AFTER connecting all cables and devices, plug in the power cords for your TV and other devices.

Then press POWER on the TV control panel or remote control to turn on the TV. If the TV stops responding to the controls on the remote control or TV control panel and you cannot turn the TV off or on, please unplug the power cords few seconds then re-plug to try again.

10 See “Menu layout and navigation” for a quick

overview of navigating the TV’s menu system ( page 28).

11 Program channels into the TV’s channel memory

( page 31).

12 For details on using the TV’s features, see

Chapters 6 and 7.

13 For help, refer to the Troubleshooting Guide,

Chapter 8.

14 For technical specifications and warranty

information, see Chapter 9.

15 Enjoy your new TV!

40_46G300U1_EN-A5.indb 10 2010/3/2 上午 11:32:32

Chapter 1: Introduction

TV front and side panel controls and connections

Model 40G300U1 is used in this manual for illustration purposes.

Left side panel

TV front

Control panel

1無 Green LED and TOSHIBA Logo LED

Power LED(Green) = Power indicator TOSHIBA Logo LED= On or Off ( page 30).

2無 Remote sensor

— Point the remote control toward this remote sensor ( “Remote control effective range” on page 21).

3無 POWER

— Press to turn the TV on and off. If the TV stops responding to the controls on the remote control or TV control panel and you cannot turn off the TV, please unplug the power cord few seconds then re-plug to try again.

4無 ARROWS

— When a menu is on-

pqtu

screen, these buttons function as up/down/left/ right menu navigation buttons.

5無 MENU (ENTER)

— Press to access the menu system ( pages 28–29). When a menu is onscreen, the panel functions as the

— Press to instantly close an on-screen

6無 EXIT

button on the TV’s control

ENTER

button.

menu.

7無 CHANNEL

pq — When no menu is on-screen, these buttons change the channel (programmed channels only;  page 31).

TV top

8無 VOLUME

tu — These buttons adjust the

volume level.

9無 INPUT

— Repeatedly press to change the source

you are viewing (

ANT/CABLE, VIDEO 1, VIDEO 2, ColorStream HD, HDMI 1, HDMI 2, HDMI 3, HDMI 4, PC

10無 HDMI® IN

— High-Definition Multimedia Interface input receives digital audio and uncompressed digital video from an HDMI device or uncompressed digital video from a DVI device. HDMI connection is necessary to receive 1080p signals.

11無 VIDEO-2 IN

are referred to as “

— The side panel A/V connections

” and include standard

VIDEO 2

A/V connections.

12無 USB port

— To access photo or music files.

40_46G300U1_EN-A5.indb 11 2010/3/2 上午 11:32:33

Chapter 1: Introduction

TV back panel connections

For an explanation of cable types and connections, see pages 13–20.

TV back

Power Cord

1無 LAN IN

2無 PC IN

3無 HDMI® IN

4無 PC/HDMI-1 (AUDIO) IN

5無 ANT/CABLE

6無 Digital Audio OUT

— LAN port is used to connect the TV to

your home network.

— For use when connecting a personal

computer.

Interface input receives digital audio and uncompressed digital video from an HDMI device or uncompressed digital video from a DVI device. HDMI connection is necessary to receive 1080p signals.

terminals are shared with HDMI-1 analog audio input terminals, and their use can be configured in the

analog (NTSC) and digital (ATSC) off-air antenna signals and analog and digital Cable TV (QAM) signals.

Dolby Digital or PCM (pulse-code modulation) format for connecting an external Dolby Digital decoder, amplifier, A/V receiver, or home theater system with optical audio input.

— High-Definition Multimedia

— PC audio input

Audio Setup

menu ( page 50).

— Antenna input that supports

— Optical audio output in

1 2

8 6

7無 VIDEO-1 IN

standard audio inputs plus for connecting devices with composite video.

Note: Standard (composite) video cable carry only video information; separate audio cables are required for a complete connection.

8無 ColorStream® HD

definition component video input (with standard stereo audio inputs) for connecting devices with component video output, such as a Toshiba DVD player with ColorStream®.

Note: Component video cables carry only video information; separate audio cables are required for a complete connection.

— Standard (composite) video and

— ColorStream® high-

40_46G300U1_EN-A5.indb 12 2010/3/2 上午 11:32:34

Chapter 2: Connecting your TV

Overview of cable types

Cables can be purchased from most stores that sell audio/ video devices. Before purchasing any cables, be sure of connector types required by your devices and the length of each cable.

Coaxial (F-type) cable

Coaxial (F-type) cable is used for connecting your antenna, cable TV service, and/or cable converter box to the ANT/CABLE input on your TV.

Standard A/V cables (red/white/yellow)

Standard A/V cables (composite video) usually come in sets of three, and are for use with video devices with analog audio and composite video output. These cables (and the related inputs on your TV) are typically colorcoded according to use: yellow for video, red for stereo right audio, and white for stereo left (or mono) audio.

Component video cables (red/green/blue)

Component video cables come in sets of three and are for use with video devices with component video output. (ColorStream® is Toshiba’s brand of component video.) These cables are typically color-coded red, green, and blue. Separate audio cables are required for a complete connection.

Note: Component video cables provide better picture performance than a standard (composite) video.

Optical audio cable

Optical audio cable is for connecting receivers with Dolby Digital or PCM (pulse-code modulation) optical audio input to the TV’s DIGITAL AUDIO OUT terminal ( page 18).

Analog RGB (15-pin) computer cable

Analog RGB (15-pin) computer cable is for connecting a PC to the TV’s PC IN terminal ( page 18).

LAN cable

Standard LAN cable is used to connect the TV to your home network. ( page 20).

About the connection illustrations

You can connect different types and brands of devices to your TV in several different configurations. The connection illustrations in this manual are representative of typical device connections only. The input/output terminals on your devices may differ from those illustrated herein. For details on connecting and using your specific devices, refer to each device’s owner’s manual.

HDMI® cable (with HDMI Logo “ ”)

HDMI (High-Definition Multimedia Interface) cable is for use with devices with an HDMI output. An HDMI cable delivers digital audio and video in its native format. This cable carries both video and audio information; therefore, separate audio cables are not required for a complete HDMI device connection ( page 16 and page 19).

Note: HDMI cable provides better picture performance than a standard (composite) video.

40_46G300U1_EN-A5.indb 13 2010/3/2 上午 11:32:36

Chapter 2: Connecting your TV

Connecting a VCR and antenna, Cable TV or Camcorder

Camcorder

VIDEO

AUDIO

OUT

TV back panel

VIDEO 2 inputs on TV right side panel

You will need:

coaxial cables

•

standard A/V cables

•

If you have a mono VCR, connect L/MONO

− on the TV to your VCR’s audio out terminal

using the white audio cable only.

standard audio cables (If you have a mono VCR)

•

Note: When you use a Cable box, you may not be able to use the remote control to program or access certain features on the TV.

From Cable TV or antenna

From Cable TV

Cable box

CH 3 CH 4

Stereo VCR

VIDEO AUDIO

L R

from

CH 3

ANT

CH 4

OUT

To view the VCR:

Turn ON the VCR. Select the VIDEO 1 video input source on the TV.*

To view the camcorder video:

Select the VIDEO 2 video input source on the TV.*

To select the video input source, press INPUT on

the remote control ( page 22). To program the TV remote control to operate other devices, see Chapter 3.

OUT

To view the antenna or Cable signal:

Select the ANT/CABLE video input source on the TV.*

To view basic and premium Cable channels:

Turn OFF the VCR. Select the ANT/CABLE video

The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

input source on the TV.* Tune the TV to channel 3 or 4 (whichever channel the Cable box output is set to). Use the Cable box controls to change channels.

40_46G300U1_EN-A5.indb 14 2010/3/2 上午 11:32:37

Chapter 2: Connecting your TV

Connecting a DVD player with ColorStream® (component video), a VCR, and a satellite receiver

From satellite dish

AUDIO

OUT

Satellite

COMPONENT VIDEO

S-VIDEO

OUT

VIDEO

OUT

Satellite receiver with component video or DVD player with component video

You will need:

coaxial cables

•

standard A/V cables

•

If you have a mono VCR, connect L/MONO

− on the TV to your VCR’s audio out terminal

using the white audio cable only.

standard audio cables

•

component video cables

•

You can connect the component video cables

− (plus audio cables) from the DVD player or

satellite receiver to the ColorStream terminal on the TV. The ColorStream HD terminal can be used with Progressive (480p, 720p) and Interlaced (480i, 1080i) scan systems. A 1080i signal will provide the best picture performance (1080p is not supported).

If your DVD player or satellite receiver does

− not have component video, connect a

standard A/V cable to VIDEO 2 on the side panel. If your DVD player has HDMI video, see page 16.

TV back panel

From antenna

Stereo VCR

VIDEO AUDIO

L R

IN from ANT

CH 3 CH 4

OUT

OUT to TV

To view antenna or Cable channels:

Select the ANT/CABLE video input source on the TV.*

To view the DVD player:

Turn ON the DVD player. Select the ColorStream HD video input source on the TV.*

To view satellite programs using the component video connections:

Turn on the satellite receiver. Select the ColorStream HD video input source on the TV.*

To view the VCR or view and record antenna channels:

Turn ON the VCR. Tune the VCR to the channel you want to watch. Select the VIDEO 1 video input source on the TV.*

To record a TV program while watching a DVD:

Turn ON the VCR. Tune the VCR to the channel to record. Select the ColorStream HD video input source on the TV* to view the DVD.

To select the video input source, press INPUT on

the remote control ( page 22). To program the TV remote control to operate other devices, see Chapter 3.

40_46G300U1_EN-A5.indb 15 2010/3/2 上午 11:32:38

Chapter 2: Connecting your TV

Connecting an HDMI® or DVI device to the HDMI input

The HDMI input on your TV receives digital audio and uncompressed digital video from an HDMI source device, or uncompressed digital video from a DVI (Digital Visual Interface) source device. This input is designed to accept HDCP (HighBandwidth Digital-Content Protection) program material in digital form from EIA/CEA-861-D– compliant a set-top box or DVD player with HDMI or DVI output). The HDMI input can accept and display VGA, SVGA, XGA, WXGA, SXGA, 480i (60Hz), 480p (60Hz), 720p (60Hz), 1080i (60Hz) and 1080p (24Hz/60Hz) signal formats. For detailed signal specifications, see page 66. Supported Audio format: Linear PCM, sampling rate 32/44.1/ 48 kHz

Note: To connect a PC to the HDMI input, see page 19.

To connect an HDMI device, you will need:

•

To view the HDMI device video:

Select the HDMI 1, HDMI 2, HDMI 3 or HDMI 4 video input source on the TV.

[1]

consumer electronic devices (such as

one HDMI cable (type A connector) per HDMI device

For proper operation, it is recommended that

− you use an HDMI cable with the HDMI Logo (

To display an 1080i/60Hz signal format, you

− will need a Category 2 cable. Conventional

HDMI/DVI cable may not work properly. HDMI cable transfers both video and audio.

− Separate analog audio cables are not

required (see illustration). See “Setting the HDMI® audio mode”

− ( page 33).

TV back panel

Control panel

HDMI device

To select the video input source, press INPUT on

the remote control ( page 22). To program the TV remote control to operate other devices, see Chapter 3.

To connect a DVI device, you will need:

one HDMI-to-DVI adapter cable (HDMI type A

•

connector) per DVI device

For proper operation, the length of an HDMI-

− to-DVI adapter cable should not exceed 9.8 ft

(3m). The recommended length is 6.6 ft (2m).

one pair of standard analog audio cables per DVI

•

device

An HDMI-to-DVI adapter cable transfers

− video only. Separate analog audio cables

are required (see illustration).

See “Setting the HDMI® audio mode”

− ( page 33).

TV back panel

DVI device

VIDEO AUDIO

L R

OUT

Note: To ensure that the HDMI or DVI device is reset properly, it is recommended that you follow these procedures:

When turning on your electronic components,

• turn on the TV first, and then the HDMI or

DVI device. When turning off your electronic components,

• turn off the HDMI or DVI device first, and

then the TV.

[1] EIA/CEA-861-D compliance covers the

transmission of uncompressed digital video with high-bandwidth digital content protection, which is being standardized for reception of high-definition video signals. Because this is an evolving technology, it is possible that some devices may not operate properly with the TV.

DVI/HDCP

OUT

40_46G300U1_EN-A5.indb 16 2010/3/2 上午 11:32:39

Chapter 2: Connecting your TV

REGZA-LINK® connection

You can control the basic functions of connected audio/video devices using the TV’s remote control if you connect a REGZA-LINK compatible audio receiver or playback device. For an explanation of setup and operations, see page 56.

TV back panel

Playback device

Audio receiver

Playback device

(REGZA-LINK DVD player,etc.)

To connect an Audio Receiver and Playback Devices, you will need:

HDMI cables ( page 13)

•

Note:

If several devices are connected, REGZA-LINK

•

feature may not operate properly. For proper operation, it is recommended that you

•

use HDMI cables with the HDMI Logo ( ).

Before controlling the device(s):

After completing the above connections, set the

•

REGZA-LINK Setup menu as you desire ( page

58). The connected devices must also be set. For

•

details, see the operation manual for each device. The REGZA-LINK feature uses the CEC

•

technology as regulated by the HDMI standard. This feature is limited to models incorporating

•

Toshiba’s REGZA-LINK. However, Toshiba is not liable for those operations. Refer to the individual instruction manuals for compatibility information.

Note: This feature may not work properly depending on the devices that are connected.

40_46G300U1_EN-A5.indb 17 2010/3/2 上午 11:32:39

Chapter 2: Connecting your TV

Connecting a digital audio system

The TV’s DIGITAL AUDIO OUT terminal outputs a *Dolby® Digital or 2-channel down-mixed PCM (pulse-code modulation) signal for use with an external Dolby audio system with optical audio input.

You will need:

optical audio cable (Use an optical audio cable

•

that has the larger “TosLink” connector and not the smaller “mini-optical” connector.)

To control the audio:

Turn on the TV and the digital audio device.

1無

Press on the TV’s remote control and open the

2無

Sound menu.

Highlight Audio Setup and press .

3無

Digital decoder or other external

Dolby Digital decoder or

other digital audio system

TV back panel

Note:

Some audio systems may not be compatible

•

with Dolby Digital bitstream signals. Older audio systems that are not compatible with standard optical out signals may not work properly, creating a high noise level that may damage speakers or headphones. THIS DAMAGE IS NOT COVERED BY YOUR WARRANTY. The DIGITAL AUDIO OUT terminal may not

•

output some digital audio sources because of copy restrictions.

Manufactured under license from Dolby

Laboratories. Dolby, and the double-D symbol are trademarks of Dolby Laboratories.

Connecting a personal computer (PC)

With either the PC IN or HDMI connection, you can watch your computer’s display on the TV and hear the sound from the TV’s speakers.

To connect a PC to the PC IN terminal on the TV:

When connecting a PC to the PC IN terminal on the TV, use an analog RGB (15-pin) computer cable and a PC audio cable.

TV back panel

PC audio

cable

In the Optical Output Format field, select either

4無

Dolby Digital or PCM, depending on your device

(“Selecting the optical audio output format” on page 45).

Computer

To use a PC, set the monitor output resolution on the

•

PC before connecting it to the TV. The PC IN terminal can accept and display VGA, SVGA, XGA, WXGA and SXGA signal formats. For detailed signal specifications ( page 66). Other formats or non-standard signals will not be displayed correctly. To display the optimum picture, use the PC setting

•

feature ( “Using the PC settings feature” on page 50).

PC audio

output

Conversion adapter (if necessary)

(continued)

40_46G300U1_EN-A5.indb 18 2010/3/2 上午 11:32:41

Chapter 2: Connecting your TV

Note:

The PC audio input terminals on the TV are shared

• with the HDMI-1 analog audio input terminals (

page 50). Some PC models cannot be connected to this TV.

• An adapter is not needed for computers with a

• compatible mini D-sub15-pin terminal.

Depending on the DVD’s title and the

• specifications of the PC on which you are playing

the DVD-Video, some scenes may be skipped or you may not be able to pause during multi-angle scenes.

Signal names for mini D-sub 15-pin connector

•

Pin No.

Signal name

Pin No.

Signal name

Pin No.

Signal name

1 R 6 Ground 11 Reserved

2 G 7 Ground 12 SDA

3 B 8 Ground 13 H-sync

4 Reserved 9 5V 14 V-sync

5 Reserved 10 Ground 15 SCL

To connect a PC to the HDMI terminal on the TV:

When connecting a PC to the HDMI terminal on the TV, use an HDMI-to DVI adapter cable and analog audio cables. If connecting a PC with an HDMI terminal, use an HDMI cable (type A connector). Separate analog cables are not necessary ( page 16).

TV back panel

Note:

The edges of the images may be hidden.

• If receiving a 480i (HDMI), 480p (HDMI), 720p,

• 1080i, or 1080p signal program, Native mode

scales the video to display the entire picture within the borders of the screen (i.e. no overscanning).

Connecting a home network

The LAN port allows your Toshiba TV to connect to your home network. You can use this revolutionary home entertainment networking system to access photo, video and audio files that are stored on a DLNA server and play/display them on your TV. For supported formats, see page 53.

Note:

The TV’s home network connection allows

• access to file sharing only. You will NOT be

able to use the TV to access the Internet. If you use a hub or switch to connect the

• TV to your home network, you may not be

able to use the automatic setup and have to manually set up the network address. See page 55. If you use a router with built-in DHCP

• functionality, use the automatic setup.

Manual setup may not work. If you connect the TV and PC directly, use

• Ethernet crossover cable.

PC audio

cable

Computer

PC audio

output

The HDMI input can accept and display VGA, SVGA, XGA, WXGA, SXGA, 480i (60Hz), 480p (60Hz), 720p (60Hz), 1080i (60Hz), and 1080p (24Hz/60Hz) signal formats. For detailed signal specifications, see page 66.

40_46G300U1_EN-A5.indb 19 2010/3/2 上午 11:32:42

Chapter 2: Connecting your TV

To connect the TV to a home network

the back of your TV

Modem (DSL or Cable)

[1] Coaxial or telephone cable (depending on your modem type) [2] Standard LAN cable [3] Do NOT connect a phone jack directly to the TV’s LAN port.

Router with Hub

DLNA server or Sever PC(with DLNA server function)

40_46G300U1_EN-A5.indb 20 2010/3/2 上午 11:32:43

Chapter 3: Using the remote control

Preparing the remote control for use

Your TV remote control can operate your TV and many other devices such as cable converter boxes, satellite receivers, VCRs, DVD players, and HTIBs (home theater in a box), even if they are different brands.

If you have a Toshiba device:

Your TV remote control is preprogrammed to operate most Toshiba devices ( page 23).

If the remote control does not operate

•

correctly, or if the operating range becomes reduced, replace batteries with new ones.

When necessary to replace batteries in the

•

remote control, always replace both batteries with new ones. Never mix battery types or use new and used batteries in combination.

Always remove batteries from the remote

•

control if they are dead or if the remote control is not to be used for an extended period of time. This will prevent battery acid from leaking into the battery compartment.

If you have a non-Toshiba device or a Toshiba device that the remote control is not preprogrammed to operate:

You can program the TV remote control so it will operate the other device ( pages 23–27).

Installing the remote control batteries

Remove the battery cover from the back of the

1無

remote control.

Squeeze tab and lift cover.

Install two “AAA” size batteries, making sure to

2無

match the + and – signs on the batteries to the signs on the battery compartment.

Reinsert the battery cover in the remote control

3無

until the tab snaps.

Caution: Batteries must not be exposed to excessive heat such as sunshine, fire or the like.

Note:

Be sure to use AAA size batteries.

• Dispose of batteries in a designated disposal

• area.

Batteries should always be disposed of with

• the environment in mind. Always dispose of

batteries in accordance with applicable laws and regulations.

Remote control effective range

For optimum performance, aim the remote control directly at the TV and make sure there is no obstruction between the remote control and the TV.

Point remote control toward remote sensor on front of TV.

16.4 ft (5m)

40_46G300U1_EN-A5.indb 21 2010/3/2 上午 11:32:44

Chapter 3: Using the remote control

Learning about the remote control

The buttons used for operating the TV only are described here. For a complete list of the remote control’s functions, see the remote control functional key chart ( page 24).

Note: The error message “NOT AVAILABLE” may appear if you press a key for a function that is not available.

1無

2無

3無

4無

5無

6無

7無

8無

9無

10無

11無

12無

13無

14無

15無

16無

17無

18無

19無

turns the TV on and off. When the TV is

POWER

on, the green LED indicator on the TV front will be illuminated.

freezes the picture. Press again to restore the

FREEZE

moving picture ( page 42).

accesses the sleep timer ( page 56).

SLEEP

cycles through the picture sizes:

PIC SIZE TheaterWide 1/2/3, Full, 4:3 HD, Native

( page 39-41).

Channel Numbers (0–9, –/100)

The button is used to tune digital channels ( page

39) or to edit the Favorites List ( page 36).

selects the video input source ( page 35).

INPUT

pq cycles through programmed channels when no

menu is on-screen ( page 31).

adjusts the volume level.

VOL + –

FAV BROWSER

Channel Brower™ ( page 36).

RECALL

CH RTN

( page 39).

MUTE

INFO

details, when available ( page 58).

the Channel Browser™ and tune to the previous/next channel in the channel history ( page 36). (Also see “Arrow buttons.”)

Arrow buttons (

these buttons select or adjust programming menus. (Also see / .)

ENTER

system.

and 29).

EXIT

MODE SELECT switch

SAT, AUX 1, and AUX 2 modes ( page 23). Set to “TV” to control the TV.

accesses the Favorites List in the

displays TV status information ( page 58).

returns to the last viewed channel or source

reduces or turns off the sound ( page 44).

displays TV status information as well as program

/ While watching TV, these buttons open

pqtu

activates highlighted items in the main menu

accesses the main TV menu system ( pages 28

closes on-screen menus.

directly tune channels.

When a menu is on-screen,

)

switches between TV, CABLE/

Natural

and

Dot by Dot

40_46G300U1_EN-A5.indb 22 2010/3/2 上午 11:32:46

Chapter 3: Using the remote control

Using the remote control to control your other devices

If you have a non-Toshiba device or a Toshiba device that the remote control is not preprogrammed to operate, you must first program the remote control to recognize the device (if you have not already done so) ( pages 25–27).

To use your TV remote control to operate a:

Cable converter box or satellite receiver, set the

•

MODE SELECT switch to CABLE/SAT. VCR, set the MODE SELECT switch to AUX 1.

•

DVD player or HTIB, set the MODE SELECT

•

switch to AUX 2.

Note: Even after the TV remote control is programmed, it may not operate certain features on any other devices. If this happens and you wish to use those features, you will need to use the device’s original remote control.

Point the remote control

directly at the device.

16 17 18 19

1無

2無

3無

4無

5無

6無

7無

8無

9無

10無

11無

12無

13無

14無

15無

16無

17無

18無

19無

20無

Turns the selected device on and off.

POWER

Channel Numbers (0-9)

channels (as opposed to ).

Press to directly access DVD chapters higher than

+10

10.

TOP MENU

memory ( page 31):

p q

GUIDE

mode.

SET UP

mode.

INFO

pqtu

on some DVD players).

ENTER

players to activate certain functions.

DVD CLEAR

PLAY

PAUSE

picture; press again to restart.

STOP

SKIP

mode to view the picture moving rapidly forward.)

SKIP

chapter, or locates previous chapters.

REW

during play mode to view the picture moving rapidly backward.)

TV/VCR

press to select TV mode.

REC

MODE SELECT switch

“CABLE/SAT” to control a cable converter box or satellite receiver; “AUX 1” to control a VCR; “AUX 2” to control a DVD player or HTIB.

Accesses a DVD’s top menu.

pq For channels programmed into the channel

selects the next higher channel. selects the next lower channel.

Displays the channel guide in the CABLE/SAT

Accesses a DVD’s setup menu in the AUX

Displays TV status information on-screen.

Press to navigate DVD menus (may not work

Required by some satellite receivers and DVD

Press to reset the title and chapter number.

Begins playback of a tape or DVD.

Press during play or record mode to pause the

Stops the tape or DVD.

Skips forward to locate later DVD chapters.

Fast-forwards the tape or DVD. (Press during play

Skips back to beginning of current DVD

Rewinds/reverses the tape or DVD. (Press

To view one program while recording another,

selects a specific DVD chapter, title or time.

Starts tape recording.

Press to directly access

Set to “TV” to control the TV;

40_46G300U1_EN-A5.indb 23 2010/3/2 上午 11:32:47

Chapter 3: Using the remote control

Remote Control functional key chart

Note:

“---” = key does not send a signal in that remote control mode.

• “ TV” = key will affect the TV, even though the remote control is in another mode.

•

* Not available for your TV.

•

REMOTE CONTROL KEY

POWER Power Power Power Power Power

SLEEP Sleep timer

PIC SIZE Picture size

FREEZE FREEZE

1-9 Digit 1-9 Digit 1-9 Digit 1-9 Digit 1-9 Digit 1-9

0 Digit 0 Digit 0 Digit 0 Digit 0 Digit 0

100/–/+10 – (sub CH) --- – (sub CH) 100 +10

INPUT TV/Video select

FAV BROWSER/ TOP MENU

MUTE Sound mute

SET UP/GUIDE Guide* --- SAT Guide --- Setup

VOL + – Volume up/down

CHpq

RECALL RECALL

CH RTN/DVD RTN

INFO Info --- Info --- Display

ENTER Enter --- Select, Enter --- Enter

MENU Menu --- Action Menu --- DVD Menu

EXIT/DVD CLEAR

PAUSE/STEP Pause* --- --- Pause Pause

PLAY Play* --- --- Play Play

STOP Stop* --- --- Stop Stop

SKIP Skip REV* --- --- --- Skip REV

SKIP Skip FWD* --- --- --- Skip FWD

REW Rewind* --- --- Rewind Rewind

FF Fast FWD* --- --- Fast FWD Fast FWD

TV/VCR/ SEARCH

Toshiba TV CABLE SAT (satellite)

TV TV TV TV

FAV BROWSER DVD TOP Menu*

Channel up/down

Previous channel DVD previous menu*

Menu up/down ---

Menu left/ Channel Browser™

Menu right/ Channel Browser™

Exit DVD clear*

DVD search* --- --- TV/VCR DVD search

--- --- --- Top Menu

TV TV TV TV

Channel up/down

TV TV TV TV

--- --- --- DVD Return

--- Menu left --- Menu left

--- Menu right --- Menu right

--- Exit --- DVD Clear

Channel up/down

Menu up/down

AUX 1 (VCR)

Channel up/down

--- Menu up/down

AUX 2 (DVD or HTIB)

---

40_46G300U1_EN-A5.indb 24 2010/3/2 上午 11:32:49

Chapter 3: Using the remote control

REMOTE CONTROL KEY

REC REC MENU* --- ---

SLOW – SLOW REW* --- --- --- ---

SLOW + SLOW FWD* --- --- --- ---

ANGLE Angle* --- --- --- DVD Angle

SUB TITLE Sub title* --- --- --- DVD Sub title

AUDIO Audio* --- --- --- DVD Audio

EJECT Eject* --- --- --- DVD Eject

Programming the remote control to control your other devices

Your Toshiba TV remote control is preprogrammed to operate most Toshiba devices. To program your TV remote control to operate a non-Toshiba device (or a Toshiba device that it is not preprogrammed to operate), follow the steps below. For details on using the remote control to operate the device, see page 23.

In the remote control code table ( page 26), find the

1無

code for your device. If more than one code is listed, try each one separately until you find one that works.

Set the

2無

3無

4無

5無

6無

MODE SELECT switch

programming the remote control to operate — CABLE/ SAT (for a cable converter box or satellite receiver), AUX 1 (for a VCR or TV/VCR combo), or AUX 2 (for a DVD player or HTIB [home theater in a box])

While holding down , press the Channel Number buttons to enter the 3-digit code for your device.

To test the code, turn on the device, point the remote control at it, and press . See notes below.

If the correct code was entered, the device will

•

turn off. If the device does not respond, repeat steps 1–4

•

using another code. If the device does not respond to another code,

•

you will need to use the remote control that came

with the device. Remember to set the “TV” to control the TV.

For future reference, write down the code(s) you used:

DEVICE CODE DEVICE CODE

Toshiba TV CABLE SAT (satellite)

Note:

In addition to POWER, confirm that all necessary

• keys on the TV remote control operate your device.

If some keys are not operational, repeat the device code setup using another code (if other codes are listed for your device). If, after trying all listed codes, the necessary keys do not operate your device, use the device’s original remote control.

Every time you change the batteries, you will need

• to reprogram the remote control.

Some newer VCRs respond to either of two codes.

• These VCRs have a switch labeled “VCR1/VCR2.”

If your VCR has this kind of switch and does not

to the type of device you are

MODE SELECT switch

back to

respond to the codes for your VCR brand, set the switch to the other position (“VCR1” or “VCR2”) and reprogram the remote control.

AUX 1 (VCR)

Record (2 click)

AUX 2 (DVD or HTIB)

---

40_46G300U1_EN-A5.indb 25 2010/3/2 上午 11:32:50

Chapter 3: Using the remote control

Remote control codes

In some cases you may not be able to operate your device with the TV remote control. Your other device may use a code that is not recognized by the TV remote control. If this happens, use the device’s remote control.

Cable converter box

ABC 061, 062, 063, 082, 084,

Archer 065, 092, 097, 099 Cableview 064, 094 Century 092 Citizen 090, 092, 097 Contec 083, 085, 086, 088, 093, 098 Diamond 093 GE 061, 062 Gemini 069, 070, 094 Hamlin 093 Hitachi 062, 095, 096 Jasco 097 Motorola/GI/ Jerrold Magnavox 072, 096 Memorex 092, 104 Multi Canal 090 Novavision 101 Panasonic 081, 083, 085 Philco 087 Philips 066, 067, 068, 070, 072,

Pioneer 076, 077 Proscan 061, 062 Radio Shack 092, 097, 099 RCA 064, 081 Realistic 065 Recoton 102 Samsung 077, 090 Scientific Atlanta 063, 078, 079, 080, 088,

Sears 095 Signature 062 Signature 2000 096 Sprucer 081, 085 Starcom 069, 082, 087, 096, 103, 104 Stargate 069, 090 Sylvania 095, 100 TeleView 090 Texscan 100 Tocom 071, 084, 085 U. S. Electronics 087, 096, 098 United Cable 082 Universal 065, 092, 097, 099, 102, 103 Wards 096

Satellite receiver

Alphastar 038, 059 Chaparral 034 DISH Network 057 Drake 020, 040, 044, 046, 050, 053 Echostar 018, 041, 051

087, 092, 096, 098

062, 069, 071, 082, 086, 089, 096, 107

073, 074, 075, 092

098, 101, 105

Express Vu 057 Fujitsu 027 GE 008, 009, 013 General Instruments Hitachi 033 Hughes 033 Hughes Network Systems 019 Intersat 048 Janeil 027 JVC 017, 057 Kenwood 029 Magnavox 060 Optimus 058 Pansat 036, 052 Primestar 015, 042 Proscan 008, 009, 013 Radio Shack 022, 023, 030 RCA 008, 009, 013, 016 Realistic 030 Samsung 059 Sony 014, 055 Star Choice 057, 106 Star Trak 025, 026, 037, 054 STS 024 Toshiba 000, 001, 002, 003,

Uniden 021, 028, 030, 032,

Zenith 027

010, 011, 012, 022, 023, 031, 049

004, 005, 006, 007, 020, 031, 056

035, 039, 043, 045, 047, 058

TV/VCR Combo

Action 078 GE 059, 062 Goldstar 065 Panasonic 065 Precision 078 Quasar 065 Realistic 079 Sony 074 Toshiba 057 Zenith 065 Totevision 009, 010, 065

DVD/VCR Combo

Go Video DVD=087,

JVC DVD=088,

RCA DVD=089,

Samsung DVD=090,

Sanyo DVD=091,

Zenith DVD=092,

VCR=081

VCR=082

VCR=083

VCR=084

VCR=085

VCR=086

DVD player

Aiwa 006, 015 Apex 016, 017 BOSE 097 Broksonic 018

Clarion 019 Classic 020 Daewoo 021 Denon 022, 023, 024, 025 Emerson 026, 027 Fisher 028 Funai 027 GE 001, 029, 030 Go Video 087 GPX 031 Hitachi 005, 032, 033, 034, 035 JVC 003, 007, 036, 042, 088 Kenwood 037 Konka 008, 009 Magnavox 004, 038 Memorex 039 Mintek 040 NAD 026 Nakamichi 041 Norcent 043 Onkyo 044 Oritron 058 Panasonic 010, 045, 046, 047, 048, 049,

Philips 004, 051 Pioneer 052, 053, 054, 055 Proscan 001, 056 Qwestar 057, 058 RCA 001, 002, 059, 089 Sampo 060 Samsung 061, 062, 086, 090 Sansui 073 Sanyo 063, 091 Sharp 064, 067 Sherwood 074 Sony 011, 012, 065, 066, 068, 069,

Sylvania 027 Teac 071 Technics 072 Techwood 075 Toshiba 000, 013, 076, 077, 078 Yamaha 079, 080, 081 Zenith 014, 082, 092

050

070

Portable DVD player

Aiwa 093 Audiovox 094, 095 Panasonic 024, 096, 099 RCA 098

VCR

Admiral 049 Aiko 019 Aiwa 018 Akai 003, 004, 037, 038, 039,

Audiovox 010 Bell & Howell 007, 068 Broksonic 008, 017 Calix 010 Carver 026 CCE 019 Citizen 009, 010, 011, 012,

Colortyme 005 Craig 009, 010, 016, 061, 065, 079

058, 069

013, 014, 015, 019,057, 073

(continued)

40_46G300U1_EN-A5.indb 26 2010/3/2 上午 11:32:51

Chapter 3: Using the remote control

Curtis Mathes 001, 005, 009, 012, 014,

Daewoo 011, 013, 015, 017, 018,

Daytron 078 Denon 063 Dimensia 001, 048 Electrohome 010, 020, 065 Emerson 003, 008, 010, 011, 017,

Fisher 007, 016, 021, 022, 023,

Fuji 004, 041 Funai 018, 073 Garrard 018 GE 001, 002, 009, 040,

Go Video 056, 059, 061, 081 Goldstar 005, 010, 014, 054, 056,

Gradiente 018, 065 Harman Kardon 005 Hitachi 024, 025, 035, 037, 042,

JBL 076 JC Penney 005, 006, 007, 008, 009,

Jensen 024, 025, 037, 050 JVC 005, 006, 007, 014, 037,

Kenwood 005, 006, 007, 012,

Kodak 010 LG 010 Lloyds 053, 073, 079 Logik 061 LXI 010 Magnasonic 061, 065, 078 Magnavox 026, 027, 034, 044, 057,

Marantz 005, 006, 007, 012, 014,

Memorex 007, 009, 010, 016, 018,

MGA 020, 028, 039 MGN 056 Minolta 024, 025, 035, 063 Mitsubishi 020, 024, 025, 028, 039,

Montgomery Ward 049 Motorola 049 MTC 009, 046, 061 Multitech 009, 012, 018 NEC 005, 006, 007, 012, 014,

Nikko 010 Noblex 009 Optimus 010, 049, 065 Optonica 031

040, 048, 053, 056, 057

019, 057, 078

018, 020, 028, 039, 054, 057, 062, 065, 068, 072

057, 064, 068, 070, 071, 079

042, 048, 056

065, 067

063, 070, 080

010, 023, 024, 025, 026, 035, 056, 061, 063, 065

043, 055, 062, 063, 068, 082

014, 037, 043, 050, 053, 068, 071

061, 072

026, 053, 067

034, 049, 063, 065, 066, 068, 075, 079

043, 065

037, 043, 053, 054, 067, 070

Orion 054, 057, 062, 065, 068,

Panasonic 036, 045, 046, 057, 061,

Pentax 012, 024, 025, 035, 042,

Pentex Research 014 Philco 026, 027, 063 Philips 026, 031, 044, 057 Pioneer 006, 024, 043, 055 Portland 012, 013, 015 Proscan 001, 002, 048 Proton 061 Quasar 045 Radio Shack 010, 031, 065 Radio Shack/ Realistic Radix 010 RCA 001, 002, 003, 009, 024,

Realistic 007, 009, 010, 011, 016,

Ricoh 047 Runco 034 Samsung 009, 011, 038, 056, 073,

Sansui 006, 037, 043, 061 Sanyo 007, 009, 016, 054, 064,

Scott 008, 011, 017, 028, 030,

Sears 007, 010, 016, 021, 022,

Sharp 013, 020, 031, 049, 051,

Shintom 004, 025, 032, 061 Signature 049 Signature 2000 075 Singer 047, 061 Sony 004, 032, 033, 041, 052,

STS 035 Sylvania 018, 026, 027, 028, 044,

Symphonic 018, 050, 051, 053, 073,

Tandy 007 Tashiko 010 Tatung 037 Teac 018, 029, 037 Technics 036 Teknika 010, 018, 065 Toshiba 000, 011, 021, 023, 024,

Totevision 009, 010, 065 Unitec 073 Unitech 009 Vector Research 005, 006, 011, 012, 053

072

072, 079

053, 063

007, 009, 010, 016, 018, 020, 021, 022, 031, 049

025, 029, 035, 040, 042, 045, 048, 055, 056, 063, 071, 083

018, 020, 021, 022, 031, 049, 051, 056, 060, 065, 075, 079

084

068, 071, 075, 079, 085

057, 065, 072

023, 024, 025, 035, 053, 057, 063, 064, 065, 068, 071, 075, 079

060, 066

058, 070, 074, 076, 077, 080

072

079

028, 030, 039, 057, 074, 078, 079

Video Concepts 005, 006, 011, 012, 039,

Wards 009, 010, 011, 016, 018,

White

Westinghouse XR-1000 018 Yamaha 005, 006, 007, 014, 037,

Zenith 004, 032, 034, 041, 047,

053

020, 024, 025, 031, 035,

049, 051, 056, 057, 060,

065, 066, 079 073

053

069, 086

HTIB

Lasonic 083 Panasonic 084 Venturer 085

Denon 135, 136, 137 Hitachi 132, 133, 134 Integra 114

JVC

LG 111, 112 Marantz(US) 127, 128 Mitsubishi 125, 126 Onkyo 114 Panasonic 102, 103, 104 Philips 105 Pioneer 106 Samsung 107 Sharp 129, 130, 131 Sony 108, 109, 110,117 Yamaha 122, 123, 124

115, 116, 118, 119, 120, 121

40_46G300U1_EN-A5.indb 27 2010/3/2 上午 11:32:52

Chapter 4: Menu layout and navigation

Main menu layout

The tables below and on the next page provide a quick overview of your TV’s menu system.

To open the main menus (illustrated below), press on the remote control or TV control panel.

Icon Item Option

Picture

Sound

Preferences

Locks

Setup

Mode

Picture Settings

Noise Reduction

Game Mode

Theater Settings

Digital Audio Selector

Audio Settings

Advanced Audio Settings

Audio Setup

CC Selector

Base CC Mode

Digital CC Settings

Input Labeling

Channel Labeling

Menu Language

Channel Browser Setup

REGZA-LINK Player Control

Enable Rating Blocking

Edit Rating Limits

Input Lock

Control Panel Lock

GameTimer

New PIN Code

Installation

REGZA-LINK Setup

Network Setup

Sleep Timer

PC Settings

Logo LED

Media Player

 Sports / Standard / Movie / PC / Preference  [Opens the Picture Settings menu]  [Opens the Noise Reduction menu]  Off / On  [Opens the Theater Settings menu]  [Launches the temporary Audio Selector]  [Opens the Audio Settings menu]

 [Opens the Advanced Audio Settings menu]

 [Opens the Audio Setup menu]

 [Launches the temporary CC Selector]  Off / CC1 / CC2 / CC3 / CC4 / T1 / T2 / T3 / T4  [Opens the Digital CC Setup menu]  [Opens the Input Labeling menu]  [Opens the Channel Labeling menu]  English / Français / Español

 [Opens the Channel Browser Setup menu]

 [Opens the REGZA-LINK Player Control]

 Off / On  [Opens the Edit Rating Limits menu]  Off / Video / Video+  Off / On  Off / 30 min / 60 min / 90 min / 120 min  [Opens the New PIN Code entry screen]  [Opens the Installation menu ( page 29)]  Enable REGZA-LINK / TV Auto Input Switch

/ TV Auto Power / Device Auto Standby / Speaker Preference

 Auto Setup / IP Address / Subnet Mask / MAC Address  [Opens the Sleep Timer menu]  [Opens the PC Settings menu]  Off / On  [Opens the Media Player menu]

40_46G300U1_EN-A5.indb 28 2010/3/2 上午 11:32:54

Chapter 4: Menu layout and navigation

Setup/Installation menu layout

The Installation menu contains the Terrestrial and System Status menus.

To open the Installation menu (illustrated below), press on the remote control or TV control panel, open the

Setup menu, select Installation, and press .

Icon Item Option

Terrestrial

System Status

Input Configuration

Channel Program

Channel Options

Channel Tuning Mode

Time Zone

Signal Meter

System Information

 [Opens the Input Configuration menu]  [Start]  [Scans for new channels on ANT/CABLE]  [Opens the Skip / Lock Channel menu]  Standard / Auto / Digital 

Eastern / Newfoundland / Atlantic / Hawaii / Alaska /

Pacific / Mountain / Central

 [Opens the Signal Meter menu]

 [Opens the System Information screen]

Navigating the menu system

You can use the buttons on the remote control or TV control panel to access and navigate your TV’s onscreen menu system.

Press to open the menu system.

•

When a menu is open, use the up/down/left/right

•

arrow buttons (pqtu) on the remote control or TV control panel to move in the corresponding direction in the menu.

Press to save your menu settings or select

•

a highlighted item. (A highlighted menu item appears in a different color in the menu.) All menus close automatically if you do not make

•

a selection within 60 seconds, except the signal meter menu, which closes automatically after about 5 minutes.

To close a menu instantly, press .

•

Note:

The menu background may sometimes appear black, depending on the signal the TV is

receiving. This is not a sign of malfunction.

40_46G300U1_EN-A5.indb 29 2010/3/2 上午 11:32:55

Chapter 5: Setting up your TV

Initial Setup

When you first turn on or reset the TV, the Initial Setup window will appear.

In the Menu Language field, press t or u to

1無

select your preferred language. Press t or u to select Time Zone and set your

2無

desired time zone with t or u and press .

Next, the Location setting window will appear.For

3無

normal home use, press t or u to select Home and press .

Next, ANT/CABLE In setup window will appear.

4無

Press t or u to select the input source (Cable or Antenna) for the ANT/CABLE input on the TV.

If you select Antenna, the Channel Tuning Mode

5無

setup window will appear. To tune only digital channels, select Digital. To tune digital channels preferentially over analog when entering channel number directly, select Auto. For normal tuning,

select Standard. Press to continue to Auto Tuning.

Press to select Start Scan and continue with

6無

the Auto Tuning.

You can stop the Initial Setup with . However if you do not finish the entire Initial Setup process, the Initial Setup window will appear every time you turn on the TV.

Selecting the menu language

You can choose from three different languages (English, French and Spanish) for the on-screen display of menus and messages.

To select the menu language:

Press and open the Preferences menu,

1無

highlight Menu Language. Press t or u to select your preferred menu

2無

language.

TOSHIBA Logo LED

You can select TOSHIBA Logo LED either On or Off.

Press and open the Setup menu, highlight

1無

Logo LED. Press t or u to select either On or Off and press .

2無

Configuring the antenna input source for the ANT/CABLE terminal

To configure the ANT/CABLE input source:

Press and open the Setup menu.

1無

Highlight Installation and press .

2無

(A new set of Installation menu icons will appear,

3無

as shown below.) Open the Terrestrial menu, highlight Input Configuration, and press .

Highlight ANT/CABLE In and press t or u to

4無

select the input source (Cable or Antenna) for the ANT/CABLE input on the TV.

To save your new settings, highlight Done and press

5無

. To revert to your original settings, highlight

Press to close the Preferences menu.

3無

Cancel and press .

(continued)

40_46G300U1_EN-A5.indb 30 2010/3/2 上午 11:32:58

Chapter 5: Setting up your TV

Programming channels into the TV’s channel memory

When you press or on the remote control or TV control panel, your TV will stop only on the channels you programmed into the TV’s channel memory. Follow the steps below to program channels into the TV’s channel memory.

Programming channels automatically

Your TV can automatically detect all active channels in your area and store them in its memory. After the channels are programmed automatically, you can manually add or erase individual channels in the channel memory.

Note:

You must configure the ANT/CABLE input

• source before programming channels (

page 30). The automatic channel programming process

• will erase channels that were previously

programmed into the TV’s memory. To tune the TV to a channel not programmed

• in the channel memory, you must use the

Channel Number buttons on the remote control. Programming channels when the ANT/

• CABLE input is configured for Cable will take

substantially longer than when the antenna input is configured for Antenna. This is normal; however, once channel programming is finished, you should not have to repeat the programming process again unless your Cable TV service lineup changes significantly.

To program channels automatically:

Configure the antenna input source, if you have

1無

not already done so ( page 30).

Press and open the Setup menu.

2無

Highlight Installation and press .

3無

(A new set of Installation menu icons will appear,

4無

as shown below.) Open the Terrestrial menu, highlight Channel Program to bring up the Start

Scan, and press again to begin channel programming.

ANT/CABLE Antenna Scanning channe ls, please wait . ..

Number of Chann els Found - 73 Scanning Digita l Channels Found Channel - 118

Abort

The TV will automatically cycle through all the antenna channels, and store all active channels in the channel memory. While the TV is cycling through the channels, the message “Scanning channels, please wait” appears (as shown above).

To cancel channel programming, press on

5無

the remote control (or highlight Cancel in the on-

screen display and press ).

When channel programming is finished, press

or to view the programmed channels.

52%

Setting channel skip

To prevent certain channels from being viewed, channel positions can be skipped.

From the Setup menu, highlight Installation and

1無

press . Press p or q to select

2無

. The list of channels will appear.

Channel Options

and press

(continued)

40_46G300U1_EN-A5.indb 31 2010/3/2 上午 11:32:59

Chapter 5: Setting up your TV

Press p or q to select a channel position to be

3無

skipped and press . A tick will appear in the

box.To remove the tick, press again.

To add a channel to the channel memory:

Highlight the checked box next to the channel number

you want to add, and then press to remove the tick.

To manually add digital subchannels on a physical channel:

Use the Channel Numbers and the Dash ( ) on the remote control to enter the channel number (for example, 56–1). If the channel is found, the number will be added to the list and the box will be unchecked. If the channel is not found, a message will appear.

Note: Skipped channels cannot be selected with

or ; however, they can still be accessed

using the number keys on the remote control.

Labeling channels

A list of common channel labels (logos) for various channels (ABC, CBS, etc.) will be programmed into the TV. You will be able to view and assign these logos from the Channel Labeling window. If the desired channel label is not provided in the list, you will be able to manually enter/edit labels using the software keyboard.

To assign channel labels:

Press and open the Preferences menu.

1無

Highlight Channel Labeling and press .

2無

The Channel Labeling window opens.

Press or to select the channel you want to

3無

label. Press pqtu to highlight the desired channel

4無

label and press .

Repeat steps 3 and 4 for other channels.

5無

To save your settings, highlight Done and press .

6無

The maximum number of labels that can be stored is 128.

To remove channel labels:

Open the Channel Labeling window.

1無

Press or to select the channel for which

2無

you want to remove the label. Press pqtu to highlight No Label and press .

3無

Repeat steps 2 and 3 for other channels.

4無

To save your settings, highlight Done and press .

5無

If the desired channel label is not available from the list of presets, you can create a custom label.

To create and assign a custom label:

Open the Channel Labeling window.

1無

Press or to select a channel you want to

2無

label. Press pqu to highlight Custom and press .

3無

The software keyboard will appear.

Repeatedly press the corresponding key on the

4無

remote control to highlight the desired character on the on-screen software keyboard.

The highlighted character is entered after you

5無

either press a different key, press u key, or after a two-second pause.

Repeat steps 4 and 5 until you have entered all

6無

desired text.

When finished, press .

7無

New labels will be added to the list in alphabetical

8無

order and marked with an icon to indicate that they are custom. Highlight the new custom label

and press to assign. Assigned channel labels will be displayed in the banner,

Channel Options, and Channel BrowserTM.

To delete the custom label:

Open the Channel Labeling window.

1無

Highlight the label to be deleted and press .

2無

Highlight Yes from the deletion confirmation

3無

window and press .

(continued)

40_46G300U1_EN-A5.indb 32 2010/3/2 上午 11:33:01

Chapter 5: Setting up your TV

Highlight Done and press to save changes,

4無

and go back to the Channel Labeling window.

Setting the HDMI® audio mode

To set the HDMI audio mode:

Press and open the Sound menu.

1無

Highlight Audio Setup and press .

2無

Press p or q to select HDMI 1 Audio and

3無

then press t or u to select the HDMI 1 audio mode (Auto, Digital, or Analog). (Auto is the recommended mode.) See “Connecting an HDMI or DVI device to the HDMI input” ( page 16).

Mode Description

When viewing the HDMI 1 input, if

Auto

Digital

Analog

4無

Note: Because the PC and HDMI-1 inputs share the same set of analog audio inputs, the

PC Audio menu setting influences the HDMI 1 Audio menu setting. If PC Audio is set to “No,”

digital audio from the HDMI input is available, it will be output. If not, the TV will automatically detect and output analog audio from the PC Audio input.

When viewing the HDMI 1 input, digital audio from the HDMI input will be output.

When viewing the HDMI 1 input, analog audio from the PC Audio input will be output.

To save your settings, highlight Done and press

the HDMI 1 Audio setting changes to “Auto.” If PC Audio is set to “Yes,” the HDMI 1 Audio setting is set to “Digital” and is grayed out in the menu. (Also see item 4 on page 12 and “Setting the PC Audio” on page 50.)

Viewing the digital signal meter

You can view the digital signal meter in the ANT/ CABLE digital TV input source only.

To view the digital signal meter:

Press and open the Setup menu.

1無

Highlight Installation and press .

2無

A new set of Installation menu icons will appear.

3無

Open the Terrestrial menu, highlight Signal Meter, and press .

Press pqtu to select the antenna input and

4無

digital channel whose signal you want to check.

Note:

The physical digital channel number listed in

•

the Signal Meter screen may not correspond to a virtual TV channel number. Contact your local broadcasters to obtain the RF channel numbers for your local digital stations. The signal strength does not change between

•

virtual channels on the same physical channel.

To close the screen and return to the Terrestrial menu:

Highlight Done and press .

To return to normal viewing:

Press .

Setting the time zone

The Time Zone setup will allow you to specify the correct time zone for your region. This feature will allow the TV status information to show the correct time zone information ( page 58).

To set the time zone:

From the Setup menu, highlight Installation and

1無

press . A new set of Installation menu icons will appear.

Highlight Time Zone, and press .

2無

Press t or u to select the region, highlight Done,

3無

and then press .

(continued)

40_46G300U1_EN-A5.indb 33 2010/3/2 上午 11:33:02

Chapter 5: Setting up your TV

After the time zone has been set, you will be asked to set the current Daylight Saving Time status.

To set the Daylight Saving Time status:

Press t or u to select Yes or No, highlight Done,

1無

and then press .

Viewing the system status

To view the system status:

Press and open the Setup menu.

1無

Highlight Installation and press .

2無

A new set of Installation menu icons will appear.

3無

Open the System Status menu, highlight System Information, and press .

Press tu to scroll through the menu bar to select

4無

the Factory Defaults or Support Information and view the related information.

To close the screen and return to the Installation menu:

Highlight Done and press .

To return to normal viewing:

Press .

Reset Factory Defaults

To reset all settings and channels to their factory default values:

Press and open the Setup menu.

1無

Highlight Installation and press . A new set of

2無

Installation menu icons will appear.

Open the System Status menu, highlight System

3無

Information, and press .

Press tu to scroll through the menu bar to select

4無

Factory Defaults.

Highlight Yes and press .

5無

(If PIN code has been set, enter your PIN code. Press

6無

t or u to select Done and press .) A warning message will appear, select Yes and press , the TV

will turn off automatically after a few seconds. After the TV turns off, unplug the TV power cord and then plug it in again to complete the reset process.

To cancel the reset:

Select No and press in step 5 above.

40_46G300U1_EN-A5.indb 34 2010/3/2 上午 11:33:02

Chapter 6: Using the TV’s features

Selecting the video input source to view

To select the video input source to view:

Press on the remote control or TV control

1無

panel.

And then either:

2無

a) Press 0–8; or b) Repeatedly press pq on the remote control

and then press to change the input; or

c) Repeatedly press on the remote control

or TV control panel to change the input.

The current signal source displays in the top right corner of the Input Selection screen.

Note:

You can label the video input sources

•

according to the specific devices you have connected to the TV ( “Labeling the video input sources” at right). Sources can be “hidden” ( “Labeling the

•

video input sources” at right). “No Video Signal” will appear randomly on the

•

screen if no signal is received in video input mode. If CEC device is connected to a HDMI input,

•

the REGZA-LINK icon will appear.

If a REGZA-LINK device with HDMI switching capability (e.g. Audio Receiver) is connected to the HDMI input:

Press on the remote or TV control panel repeatedly to highlight HDMI 1, HDMI 2, HDMI 3 or HDMI 4.

If the connected CEC device has any connected devices, a separate device selection popup window will appear.

Press repeatedly to highlight the desired input

source, and then press .

Note:

When selecting REGZA-LINK input sources

• from the popup window using , some REGZA-LINK devices may automatically turn on. When selecting input sources using pq,

• you will have to press to actually select a particular device from the popup window.

Labeling the video input sources

You can label each video input source according to the type of device you connected to each source, from the following preset list of labels:

– – (default label)

•

Audio Receiver

•

Cable

•

Compact Disc

•

DTV

•

DVD

•

Game Console

•

HDMI Switch (HDMI inputs only)

•

Laser Disc

•

Satellite/DSS

•

VCR

•

Video Recorder

•

Hide (to hide an unused input in the Input Selection

•

screen and in the Channel Browser™ Inputs list)

Note: If you select PC in the Input Selection screen, you can choose only “– –”, “Game Console”, or “Hide” as the label.

To label the video input sources:

Press and open the Preferences menu.

1無

Highlight Input Labeling and press .

2無

(continued)

40_46G300U1_EN-A5.indb 35 2010/3/2 上午 11:33:04

Chapter 6: Using the TV’s features

Press p or q to highlight the video source you

3無

want to label.

Press t or u to select the desired label for that

4無

input source. If a particular input is not used, you can select Hide as the label, which will cause that input to be “grayed out” in the Input Selection screen and skipped over when you press on the remote control.

To save the new input labels, highlight Done and

5無

press . To revert to the factory default labels, highlight

Reset and press .

Input labeling example:

The screen below left shows the default Input Selection screen (with none of the inputs labeled as a specific device). The screen below right is an example of how you could label the inputs if you connected a VCR to VIDEO 1, Cable TV to VIDEO 2, a video recorder to ColorStream HD, a DTV set-top box to HDMI 1, and a satellite/DSS set-top box to HDMI 2, and a DVD player to HDMI 3.

Input Selection screen with no inputs labeled.

To clear the input labels:

Press and open the Preferences menu.

1無

Highlight Input Labeling and press .

2無

Highlight Reset and press .

3無

Input Selection screen with all inputs labeled except input 4, which has been hidden.

Tuning channels

Tuning channels using the Channel Browser

The Channel Browser™ provides an easy navigation interface for all your channels and inputs. This feature allows you to:

Navigate the contents of all of your inputs.

•

Keep a list of your favorite channels (see

•

“Favorites Browser,” below). Keep a history of the last 32 channels or inputs

•

viewed. Quickly surf and tune your recently viewed

•

channels/inputs from the Channel Browser™ History List (illustrated on the next page). Surf via Browse mode (to immediately tune

•

channels as you highlight them in the Channel Browser™) or Select mode (to surf over channels in the Channel Browser™ before you select one to tune). Quickly change inputs from the Inputs List.

•

Quickly select REGZA-LINK devices from the

•

REGZA-LINK List.

Favorites Browser

The Favorites Browser allows you to quickly set up a favorite channels/inputs list that is integrated into the Channel Browser™.

To add a favorite channel/input:

Tune to the channel or input.

1無

Press and hold for 3 seconds.

2無

Note: Additions are added to the beginning of the Favorites list on the left side of the Channel Browser™.

To delete a favorite channel/input:

Press to open the Favorites browser

1無

list. Highlight the channel or input to delete by

2無

pressing t or u. Press and hold for 3 seconds. The channel/

3無

input will be removed from the Favorites list.

To set up the Channel Browser™:

From the Preferences menu, highlight Channel

1無

Browser Setup and press . Press p to highlight Navigation, and then press

2無

t or u to select either Browse Mode or Select Mode.

™

(continued)

40_46G300U1_EN-A5.indb 36 2010/3/2 上午 11:33:06

Chapter 6: Using the TV’s features

Press q to highlight History List, and then press t

3無

or u to select the setting you prefer: either On, or Off.

Note: History List will be cleared every time the TV is powered off.

Press q to highlight ANT/CABLE List, and then

4無

press t or u to select On or Off.

Press q to highlight Inputs List, and then press

5無

t or u to select On or Off.

Press q to highlight Favorites List, then press t

6無

or u to select On or Off.

Press q to highlight REGZA-LINK List, and then

7無

press t or u to select On or Off.

Note: REGZA-LINK List will be automatically grayed out and set to Off when Enable REGZA-LINK is switched to Off. (See “To set the REGZA-LINK Setup” on page 58 for more information.)

To save your entries, highlight Done and press

8無

. To return to factory defaults, highlight Reset

and press .

To open the Channel Browser™:

Press t or u on the remote control.

•

Press t to surf backward through the previously

•

tuned 32 channels in the History list, the channels in the ANT/ CABLE channel list, the inputs in the Inputs list, the REGZA-LINK devices in the REGZA-LINK list, or the favorite channels/inputs in the Favorites list.

Press u to surf forward through the channel

•

History, the ANT/CABLE channel list, the Inputs list, the REGZA-LINK list, or the favorite channels/inputs in the Favorites list.

Elements of the ChannelBrowser™

Current list (History, ANT/CABLE, Inputs,

1無

Favorites, or REGZA-LINK) Input type

2無

Channel or input currently being viewed

3無

Channel or input that is currently

4無

highlighted in the browser

Channels stored in the History List

5無

Channel labels

6無

To toggle among the available lists:

After opening the Channel Browser™, press p or q to toggle among History, ANT/CABLE, Inputs,

Favorites, and REGZA-LINK.

Note:

The Channel Browser™ opens in History

• List by default. Once another list has been

selected, the Channel Browser™ will open in the last selected list.

If all lists are turned off, pressing t, u, or

•

will not display the Channel Browser™.

If Favorites List is turned off, will have no effect. Pressing will bring up the Channel

• Browser™ Favorites list regardless of the last

selected list in the Channel Browser™.

To tune to a channel or input in Browse mode:

While watching TV, press t or u to

1無

open the Channel Browser™ and surf back to a previous item or surf forward to the next item in the list. In Browse mode, when you stop on an item in the Channel Browser™, it will be highlighted and the TV will automatically tune to the channel or input.

Press to close the Channel Browser™.

2無

(continued)

40_46G300U1_EN-A5.indb 37 2010/3/2 上午 11:33:07

Chapter 6: Using the TV’s features

To tune to a channel or input in Select mode:

While watching TV, press t or u to open the

1無

Channel Browser™ and surf back to a previous item or forward to the next item in the list. In Select mode, when you stop on an item in the Channel Browser™, it will be highlighted but you

must press to tune the TV to the highlighted item.

Press to tune the TV to the highlighted item.

2無

Press to close the Channel Browser™.

3無

Adding and clearing channels and inputs in the History List

Adding channels and inputs to the History List:

As a channel or input is tuned, the Channel Browser™ adds it to the History List and displays it on the “right side” of the Channel Browser™. Previously tuned channels/inputs are “shifted” to the left, eventually

moving off the left side. Press t to surf backward through the previously tuned channels/inputs. Any channel or input that is tuned repeatedly will not be repeated in the History List, but instead is moved to the end of the list on the right side of the Channel Browser™. The Channel Browser™ will store the following channels:

All channels that are tuned using the numeric buttons

•

on the remote control. All channels that are tuned using or on the

•

remote control.

Note: Whenever an item is selected that cannot be tuned (for various reasons), the TV will automatically tune to the previously viewed channel or input.

Clearing channels from the History List:

Reconfiguring the ANT/CABLE input will clear the

•

History List.

Note: See page 30 for details on configuring the antenna input.

Once 32 channels or inputs are stored in the History

•

List, the oldest item will be removed from the list when a new channel or input is tuned. Turning off the TV will clear the History List.

•

Setting the Channel Tuning Mode

This feature allows you to choose how tuning will be handled for analog and digital channels when the TV is in Antenna mode.

Note: To use this feature, the Input Configuration must be set to Antenna ( page 30).

The channel tuning mode has three options.

Mode Description

Standard

Auto (default)

Digital Only digital channels can be tuned

Note: Digital mode will be most useful after analog channels are shut down by the government in 2009.

To set the Channel Tuning Mode:

From the Setup menu, highlight Installation and

1無

press . A new set of Installation menu icons will appear.

Open the Terrestrial menu, highlight Channel

2無

Tuning Mode, and then press u to select your

desired mode.

Note:

The Channel Options windows as well as

• the Channel Browser ANT/CABLE list will be

updated automatically when you change the mode. Also, the History List will be cleared, but the Favorites List will be saved. Even if the Channel Tuning Mode is set to

• Digital, analog channel 3 will still be the

default channel to prevent the initial case where no digital channels have been found in prior channel scans. (Channel Options will not have anything listed until a scan is done.)

Both analog and digital channels can be tuned normally

Digital channels will have priority when manually entering a channel number using the Channel Number (0-9) on the remote control, analog channels can

still be tuned by / , if available

40_46G300U1_EN-A5.indb 38 2010/3/2 上午 11:33:07

Chapter 6: Using the TV’s features

Tuning to the next programmed channel

To tune to the next programmed channel:

Press or on the remote control or TV control panel.

Note: This feature will not work unless you program channels into the TV’s channel memory ( page 31).

Tuning to a specific channel (programmed or unprogrammed)

Tuning analog channels:

Press the Channel Number (0–9) on the remote control. For example, to select channel 125, press 1, 2,

5, then .

Tuning digital channels:

Press the Channel Number (0–9) on the remote control, followed by the dash ( ) button and then the sub-channel number. For example, to select digital channel 125-1, press 1, 2, 5, –, 1, then .

Note: If a digital channel is not programmed— either through the automatic channel scan ( page 31) or the Channel add function ( page

32)—you will have to tune the RF channel using the Channel Number and dash ( ) on the remote control.

Switching between two channels using Channel Return

The Channel Return feature allows you to switch between two channels without entering an actual channel number each time.

Select the first channel you want to view.

1無

Select a second channel using the Channel

2無

Number buttons (and the dash ( ) button if selecting a digital channel).

Press on the remote control. The previous

3無

channel will display. Each time you press , the TV will switch back and forth between the last two channels that were tuned.

Note: If you press from a non-antenna input, the TV will return to the last-viewed input.

Switching between two channels using SurfLock™

The SurfLock™ feature temporarily “memorizes” one channel to the button, so you can return to that

channel quickly from any other channel by pressing

. To memorize a channel to the button:

Tune the TV to the channel you want to program

1無

into the button.

Press and hold for about 2 seconds until

2無

the message “Memorized” appears on-screen.

The channel has been programmed to the button. You can then change channels repeatedly, and

3無

when you press , the memorized channel will be tuned.

The TV will return to the memorized channel one time only. Once you press and then change

channels again, the CH RTN memory will be cleared and the button will function as Channel Return, by switching back and forth between the last two channels that are tuned.This feature also works for external inputs.

Selecting the picture size

You can view many program formats in a variety of picture sizes—Natural, TheaterWide 1, TheaterWide 2, TheaterWide 3, Full, 4:3 HD, Native, and Dot by Dot (available in PC Mode Only).

Note: The “picture size” illustrations are examples only. The format of the image (in any of the picture sizes) will vary depending on the format of the signal you are currently watching. Select the picture size that displays the current program the way that looks best to you.

You can save separate picture size preferences for each input on your TV.

To select the picture size using the remote control:

Press on the remote control.

1無

While the Picture Size screen is open, you can do

2無

one of the following to select the desired picture size:

Repeatedly press .

•

Press the corresponding Number button (0–6)

•

while the Picture Size screen is open. Press p or q while the Picture Size screen is

•

open.

(continued)

40_46G300U1_EN-A5.indb 39 2010/3/2 上午 11:33:08

Chapter 6: Using the TV’s features

A B C D E F G - - - - - - - - - - - - - - - - - - - - - - - - - -

To select the picture size using the menus:

Select Picture Size in the Theater Settings menu.

1無

Press t or u to select the desired picture size

2無

setting.

Highlight Done and press .

3無

Note: Some of the picture sizes may not be available depending on the receiving signal format (those will be “grayed out” in the Picture Size screen).

Using these functions to change the picture size (i.e., changing the height/ width ratio) for any purpose other than your private viewing may be prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

Note: If you select one of the TheaterWide® picture sizes, the top and bottom edges of the picture (including subtitles or captions) may be hidden. To view the hidden edges, either scroll the picture (TheaterWide 2 and 3 only) or try viewing the program in Full or Natural picture size.

Picture Size

Natural

Picture Size

TheaterWide 2 (for letter box programs)

A B C D E F G - - - - - - - - - - - - - - - -

The top and bottom edges of the picture may be hidden*.

TheaterWide 3 (for letter box programs with subtitles)

A B C D E F G - - - - - - - - - - - - - - - -

The top and bottom edges are hidden*.

Full (for 16:9 [480i, 480p] source programs only)

If receiving a squeezed 4:3 format program, the

•

picture is stretched wider to fill the width of the screen, but not stretched taller. None of the picture is hidden.

Some program formats will display with sidebars and/or bars at the top and bottom.

•

4:3 HD

TheaterWide 1 (for 4:3 format programs)

The center of the picture remains close to its original proportion, but the left and right edges are stretched wider to fill the screen.

(for 720p, 1080i, and 1080p program sources only)

Picture is not distorted from original size.

(continued)

40_46G300U1_EN-A5.indb 40 2010/3/2 上午 11:33:10

Chapter 6: Using the TV’s features

Picture Size

Native (for 480i (HDMI), 480p (HDMI), 720p, 1080i, and 1080p signal programs)

If receiving a 480i (HDMI), 480p (HDMI), 720p,

•

1080i, or 1080p signal program, Native mode scales the video to display the entire picture within the borders of the screen (i.e. no overscanning). This is especially useful for external HD sources

•

such as DVHS movies, or PC graphics.

Note:

This mode is supported only for HDMI

• (1080p,1080i, 720p, 480p, and 480i), ColorStream

(1080i and 720p), and ANT / CABLE (digital) inputs (1080p,1080i, and 720p). Depending on the input signals, the border of

• the picture may be hidden, displayed in black,

or noisy.

Dot by Dot (for VGA, SVGA, XGA, WXGA, and SXGA sources only)

The “Dot by Dot” picture is non-scaling display. Depending on the input signal formats, picture is displayed with sidebars and/or bars at the top and bottom. (Example: VGA input source)

To view the hidden areas (such as subtitles or

captions), see below “Scrolling the TheaterWide® picture”.

Scrolling the TheaterWide® picture (TheaterWide 2 and 3 only)

You can set separate scroll settings for the TheaterWide 2 and TheaterWide 3 modes for each input.

To set the scroll settings:

Press and open the Picture menu.

1無

Highlight Theater Settings and press .

2無

In the Picture Size field, select either TheaterWide

3無

2 or TheaterWide 3 (you cannot scroll in any other

mode). Press q to highlight the Picture Scroll field.

4無

Press t or u to scroll the picture up and down as

5無

needed. To save the new settings, highlight Done and

6無

press . To revert to the factory defaults, highlight Reset and press .

Note: When receiving a signal at 480i resolution, the picture scroll function may have limited adjustment range.

Using the auto aspect ratio feature

When the auto aspect ratio feature is set to On, the TV will automatically select the picture size when one of the following input sources is received:

A 480i, 480p, 720p, 1080i digital signal from the

•

ANT/CABLE input A 480i signal from the VIDEO 1 or VIDEO 2 input

•

A 480i signal from the ColorStream HD

•

A 480i, 480p, 720p, 1080i, 1080p, or VGA (60Hz)

•

signal from the HDMI 1/2/3/4 input

Aspect ratio of signal source

4:3 normal Natural (with sidebars)

4:3 letter box TheaterWide 2

16:9 full Full

Not defined (no ID-1 data or HDMI aspect data)

Note:

The auto aspect ratio feature is not

applicable to PC input.

Automatic aspect size (automatically selected when Auto Aspect is On)

The current picture size you set under “Selecting the picture size” on page 39.

input

(continued)

40_46G300U1_EN-A5.indb 41 2010/3/2 上午 11:33:11

Chapter 6: Using the TV’s features

To turn on the auto aspect ratio feature:

Press and open the Picture menu.

1無

Highlight Theater Settings and press .

2無

In the Auto Aspect Ratio field, select On.

3無

To save the new settings, highlight Done and press

4無

. To revert to the factory defaults, highlight

Reset and press .

To turn off the auto aspect ratio feature:

Select Off in step 3 above.

Using the FREEZE feature

To use the FREEZE feature:

When viewing the TV, press to make the

1無

picture a still picture.

To return to the moving picture, press

2無

again (or any other button).

Note: If the TV is left in FREEZE mode for more than 15 minutes, the FREEZE mode will automatically be released and the TV will return to moving picture.

Using the FREEZE function for any purpose other than your private viewing may be prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

To select the picture mode using the menu system:

Press and open the Picture menu.

1無

Highlight Mode and press .

2無

Press p or q to select the picture mode you

3無

prefer and press .

Note: The picture mode you select affects the current input only. You can select a different picture mode for each input.

Adjusting the picture

Selecting the picture mode

You can select your desired picture settings from four different modes, as described below.

Mode Picture Quality

Sports

Standard

Movie

Preference Your personal preferences

Note: PC mode is available for HDMI and PC inputs only (grayed out for other input sources).

40_46G300U1_EN-A5.indb 42 2010/3/2 上午 11:33:12

Bright and dynamic picture (factory setting)

Standard picture settings (factory setting)

Lower contrast for darkened room (factory setting)

Designed for viewing of PC tables and documents

(continued)

Chapter 6: Using the TV’s features

Adjusting the picture quality

You can adjust the picture quality (Contrast, Backlight, DynaLight™, Brightness, Color, Tint, and Sharpness) to your personal preferences.

Selection Pressing t Pressing u

Contrast lower higher

Backlight* darker lighter

DynaLight** On/Off On/Off

Brightness darker lighter

Color paler deeper

Tint reddish greenish

Sharpness softer sharper

Backlight

This feature adjusts the brightness of the entire screen. When in video mode and no signal is input, this will automatically be set to

0. (Settings are stored in memory.)

** DynaLight

This function automatically strengthens the black coloring of dark areas in the video according to the level of darkness.

To adjust the picture quality:

Press and open the Picture menu.

1無

Highlight Picture Settings and press .

2無

Press p or q to select the picture quality you

3無

want to adjust (Contrast, Backlight, DynaLight, Brightness, Color, Tint, or Sharpness), and then

press t or u to adjust the setting, as described in the table above.

To save the new settings, highlight Done and

4無

press . You can use any of the picture modes ( “Selecting the picture mode,” above left) as a starting point for adjusting the picture settings. To revert back to the base mode that you began adjusting the picture settings from, highlight

Reset and press .

The picture qualities you adjusted are automatically saved in the Preference mode ( “Selecting the picture mode,” above left) until Reset is selected.

Using the closed caption mode

Base closed captions

The closed caption mode has two options:

Captions—An on-screen display of the dialogue,

•

narration, and sound effects of TV programs and videos that are closed captioned (usually marked “CC” in program guides). Text—An on-screen display of information not

•

related to the current program, such as weather or stock data (when provided by individual stations).

To view captions or text:

Press and open the Preferences menu,

1無

highlight Base CC Mode. Press t or u to select the desired closed caption

2無

mode and press .

To view captions:

•

Highlight CC1, CC2, CC3, or CC4. (CC1 displays translation of the primary language in your area.)

Note: If the program or video you selected is not closed captioned, no captions will display on-screen.

To view text:

•

Highlight T1, T2, T3, or T4.

Note: If text is not available in your area, a black rectangle may appear on screen. If this happens, set the Base CC Mode to Off.

To turn off the closed caption mode:

•

Select Off in step 2 above.

Note: A closed caption signal may not display in the following situations:

When a videotape has been dubbed

• When the signal reception is weak

• When the signal reception is non-standard

•

(continued)

40_46G300U1_EN-A5.indb 43 2010/3/2 上午 11:33:13

Chapter 6: Using the TV’s features

Digital CC Settings

You can customize the closed caption display characteristics by changing the background color, opacity, text size, type, edge, and color.

Note:

This feature is available for digital channels

• only.

You cannot set the Caption Text and

• Background as the same color.

To customize the closed captions:

Press and open the Preferences menu.

1無

Highlight Digital CC Settings and press .

2無

Press p or q to highlight the characteristic you

3無

want to change, and then press t or u to select the format for that characteristic (see table below).

To save the new settings, highlight Done and press

4無

. To revert to the factory defaults, highlight

Reset and press .

Caption Size Auto, Small, Standard, Large

Caption Text Type

Caption Text Edge

Caption Text Color

Text Foreground Opacity

Background Color

Text Background Opacity

Caption Text Edge Color

Auto, Default, Mono w. Serif, Prop. w. Serif, Mono w/o Serif, Prop. w/o Serif, Casual, Cursive, Small Capitals

Auto, None, Raised, Depressed, Uniform, Left Drop Shadow, Right Drop shadow

Auto, Black, White, Red, Green, Blue, Yellow, Magenta, Cyan

Auto, Transparent, Translucent, Flashing, Solid

Auto, Black, White, Red, Green, Blue, Yellow, Magenta, Cyan

Auto, Transparent, Translucent, Flashing, Solid

Auto, Black, White, Red, Green, Blue, Yellow, Magenta, Cyan

CC Selector

You can use the CC Selector to temporarily override the default analog caption mode (set in Base CC Mode) for a particular channel. However, once you

change to another analog channel, the closed caption setting will automatically change back to the current Base CC Mode setting.

You can also use the CC Selector to select digital closed caption services (if available). When such services are not available, the CC Selector presents a default list of services. If the selected service is not available, the next best service will be used instead.

To select closed captions:

Press and open the Preferences menu.

1無

Highlight CC Selector and press .

2無

Press p or q to select Closed Caption, and then

3無

press t or u to select the desired service.

Press .

4無

Adjusting the audio

Muting the sound

Press on the remote control to partially reduce (1/2 MUTE) or turn off (MUTE) the sound. Each time you

press , the mute mode will change in the following order:

1/2 Mute Mute Volume

If the closed caption mode is set to Off when you select “MUTE” mode, the closed caption feature is automatically activated if the TV program is Closed Captioned. To mute the audio without automatically

activating the closed caption feature, use to set the volume to 0. See “Using the closed caption

mode” ( page 43) for more information on closed caption modes.

Using the digital audio selector

You can use the Digital Audio Selector to conveniently switch between audio tracks on a digital channel (for those channels that have multiple audio tracks). This temporarily overrides the audio track chosen by the language option under Audio Setup ( “Selecting stereo/SAP broadcasts” on page 45).

To use the digital audio selector:

Press and open the Sound menu.

1無

Highlight Digital Audio Selector and press .

2無

(continued)

40_46G300U1_EN-A5.indb 44 2010/3/2 上午 11:33:14

Chapter 6: Using the TV’s features

Press p or q to select Audio, and then press t

3無

or u to select the desired service.

Press .

4無

Selecting stereo/SAP broadcasts

The multi-channel TV sound (MTS) feature allows you to output high-fidelity stereo sound. MTS also can transmit a second audio program (SAP) containing a second language, music, or other audio information (when provided by individual stations).

When the TV receives a stereo or SAP broadcast, the word “STEREO” or “SAP” appears on-screen when

is pressed.The MTS feature is only available

for analog signals on the ANT/CABLE input.

To listen to stereo sound:

Press and open the Sound menu.

1無

Highlight Audio Setup and press .

2無

In the MTS field, select Stereo.

3無

To save the new settings, highlight Done and

4無

press . To reset the settings to the factory defaults,

highlight Reset and press .

Note:

You can typically leave the TV in Stereo

• mode because it will automatically output

the type of sound being broadcast (stereo or monaural). If the stereo sound is noisy, select Mono to

• reduce the noise.

To listen to an alternate language on an ATSC digital station (if available):

Highlight the Language field in step 3 above, and then press t or u to select the language you prefer.

To listen to a second audio program on an analog station (if available):

Select SAP in step 3 above.

Note:

A second audio program (SAP) can be heard only

• on those TV stations that offer it. For example, a station might broadcast another language as a

second audio program. If you have SAP on, you will see the current program on the screen but hear the other language instead of the program’s normal audio. If you have SAP on and the station you are

• watching is not broadcasting a second audio

program, the station’s normal audio will be output. However, occasionally there is no sound at all in SAP mode. If this happens, set the MTS feature to Stereo mode.

Adjusting the audio quality

You can adjust the audio quality by adjusting the bass, treble, and balance.

To adjust the audio quality:

Press and open the Sound menu.

1無

Highlight Audio Settings and press .

2無

Press q or p to highlight the item you want to

3無

adjust (Bass, Treble, or Balance). Press t or u to adjust the level.

4無

t makes the bass or treble weaker or

•

increases the balance in the left channel (depending on the item selected).

u makes the bass or treble stronger or

•

increases the balance in the right channel (depending on the item selected).

To save the new settings, highlight Done and press

5無

. To reset the settings to the factory defaults,

highlight Reset and press .

Selecting the optical audio output format

You can use this feature to select the optical audio output format when you connect a Dolby Digital decoder or other digital audio system to the Optical Audio Out terminal on the TV (see “Connecting a digital audio system” on page 18).

To select the optical audio output format:

Press and open the Sound menu.

1無

Highlight Audio Setup and press .

2無

In the Optical Output Format field, select either

3無

Dolby Digital or PCM, depending on your device. To save the new settings, highlight Done and press

4無

. To revert to the factory defaults, highlight

Reset and press .

(continued)

40_46G300U1_EN-A5.indb 45 2010/3/2 上午 11:33:15

Chapter 6: Using the TV’s features

Using the Dolby® Digital Dynamic Range Control feature

This dynamic range control feature causes the ATSC dynamic range to be further compressed, allowing you to switch from ATSC to analog broadcasts at the same dynamic range.

To use the Dolby Digital Dynamic Range Control:

Press and open the Sound menu.

1無

Highlight Audio Setup and press .

2無

In the Dolby Digital Dynamic Range Control field,

3無

select Compressed. When Standard is selected, the audio is output with minimal compression.

To save the new settings, highlight Done and

4無

press . To revert to the factory defaults, highlight Reset

and press .

Note:

This item will be grayed out for NTSC signals,

• Video, ColorStream, and PC inputs.

The Dolby Digital Dynamic Range Control will

• function in relation to Optical Output Format

(PCM mode).

Using the Locks menu

The Locks menu includes the Enable Rating Blocking, Edit Rating Limits, Input Lock, Front (Control) Panel Lock, GameTimer, and New PIN Code features. You can use these features after entering the correct PIN code.

Entering the PIN code

Press and highlight the Locks menu icon.

1無

PIN code has not been stored. Press the Channel Number buttons to enter a new four-digit code, enter the code a second time to confirm, and

press .

The Locks/Active screen appears if the PIN code

•

is already stored. Use the Number buttons to enter your four-digit code and press .

If the wrong PIN code is entered, the message “Incorrect PIN code, please try again!” appears.

Highlight Retry and press . Enter the code again

and press .

When the correct PIN code is entered, the Locks menu opens.

Note:

PIN code can not be set to “0000”.

If you cannot remember your PIN code

While the PIN code entering screen is displayed, press

four times within five seconds. The PIN code will

be cleared and you can enter a new PIN code.

Changing your PIN code

Press and highlight the Locks menu icon.

1無

Press q to display the PIN code entering screen.

2無

Enter your four-digit PIN code and press .

3無

Press q to highlight New PIN Code and press .

4無

Press the Number buttons to enter a new four-

5無

digit code. Reenter the PIN code to confirm it.

Press . The new PIN code is now active.

6無

Note:

PIN code can not be set to “0000”.

Blocking TV programs and movies

Press q, which displays the PIN code entry

2無

screen.

The Lock System screen (below) appears if a

•

by rating (V-Chip)

Some TV programs and movies include signals that classify the content of the program (violence, sex,

(continued)

40_46G300U1_EN-A5.indb 46 2010/3/2 上午 11:33:16

Chapter 6: Using the TV’s features

dialog, language). The V-Chip feature in this TV detects the signals and blocks the programs according to the ratings you select. (For rating descriptions, see the tables on the next page.)

To block and unblock TV programs and movies:

Press and highlight the Locks menu icon.

1無

Press q to display the PIN code entering screen.

2無

Enter your four-digit PIN code and press .

3無

Press q to highlight Enable Rating Blocking.

4無

Press u to select On, and then press .

5無

Press q to highlight Edit Rating Limits and press

6無

. The Edit Rating Limits screen appears.

Press pqt u and then press to select the

7無

level of blocking you prefer. A box with an “ ” is a rating that will be blocked. As you highlight a rating, a definition for the rating appears at the bottom of the screen.

When done selecting the ratings you want to

8無

block, highlight Done and press .

Note: Above selection of blocking level is for U.S V-Chip system. For Canada rating, you can

highlight the “Canada RS” then press , another “Canadian Rating Menu” screen will appear.

Downloading an additional rating system for blocking TV programs and movies

In the future, an additional rating system may become available for use in selectively blocking programs.

Note: The currently tuned station must be receiving a digital signal before an additional rating system can be downloaded.

To download the additional rating system (if available):

Press and highlight the Locks menu icon.

1無

Press q to display the PIN code entering screen.

2無

Enter your four-digit PIN code and press .

3無

Press q to highlight Enable Rating Blocking.

4無

Press u to select On, and press .

5無

Press q to highlight Edit Rating Limits and press

6無

. The Edit Rating Limits screen appears.

Highlight Alt RS and press . The Edit Alternate

7無

Ratings screen will appear.

Note:

The Alt RS button will only be available

• if an additional rating system is currently

available.

It may take several minutes for the TV to

• download the additional rating system.

The information displayed in the Alternate

• Ratings screen will depend on the

configuration of the additional rating system available at the time of download.

Press pqt u and then press to select the

8無

level of blocking you prefer. A box with an “ ” is a rating that will be blocked.

When you are finished selecting the ratings you

9無

want to block, highlight Done and press .

In the Edit Rating Limits screen, highlight Done

and press .

Note:

The additional rating system can only be

• downloaded one time. You will not be able to

download any updates to the rating system should such updates become available. The additional rating system is not designed,

• transmitted, or controlled by the TV or

Toshiba, nor is the availability of an additional rating system determined or controlled by Toshiba. Similarly, the rating of programs in an additional rating system is not determined, transmitted, or controlled by the TV or Toshiba. The additional rating system is an evolving

• technology; therefore, availability, content, and

format may vary.

(continued)

40_46G300U1_EN-A5.indb 47 2010/3/2 上午 11:33:17

Chapter 6: Using the TV’s features

Independent rating system for broadcasters

Ratings Description and Content themes

Mature Audience Only (This program is specifically designed to be viewed by adults and

TV-MA

TV-14

TV-PG

TV-G

TV-Y7, TVY7FV

TV-Y

therefore may be unsuitable for children under 17.) L) Crude or indecent language S) Explicit sexual activity V) Graphic violence

Parents Strongly Cautioned (This program contains some material that many parents would find unsuitable for children under 14 years of age.)

D) Intensely suggestive dialog L) Strong, coarse language S) Intense sexual situations V)

Intense violence

Parental Guidance Suggested (This program contains material parents may find unsuitable for younger children.) D) Some suggestive dialog L) Infrequent coarse language S) Some sexual situations V) Moderate violence

General Audience (Most parents would find this program suitable for all ages.)

Directed to Older Children (This program is designed for children age 7 and above. Note: Programs in which fantasy violence may be more intense or more combative than other programs in this category are designated TV-Y7FV.)

All Children (This program is designed to be appropriate for all children.)

Parental Guidance Suggested

Note:

If you place an “ ” in the box next to “

• ‘None’ Rated,” programs rated “None” will

be blocked; however, programs that do not provide any rating information will not be blocked.

To display the rating of the program you are

• watching, press on the remote control. If it is rated “None,” the word “NONE” appears in the RECALL screen (as shown below right). If rating information is not provided, no rating will appear in the RECALL screen.

(Some material may not be suitable for children)

General Audience (Appropriate for all ages)

Locking channels

With the Lock feature, you can lock specific channels. The locked channels can only be accessed by entering the PIN.

To lock channels:

From the Setup menu, highlight Installation and

1無

press . Press p or q to select Channel Options and

2無

press . The list of channels will appear.

Independent rating system for movies

Ratings Description and Content themes

NC-17

PG-13

X-rated (For adults only)

Not intended for anyone 17 and under

Restricted (Under 17 requires accompanying parent or adult)

Parents Strongly Cautioned (Some material may be inappropriate for children under 13)

Press u and then p or q to select a channel in

3無

the lock column.

PIN code entry will be required to set a locked

4無

channel.

Note: If the PIN code has not been set yet, a warning message will appear.

A tick will appear in the box.

5無

To remove the tick, press again.

(continued)

40_46G300U1_EN-A5.indb 48 2010/3/2 上午 11:33:18

Chapter 6: Using the TV’s features

Unlocking programs temporarily

If you try to tune the TV to a program that exceeds the rating limits you set, the TV will enter program lock mode and the following message will appear onscreen:

This program exceeds the rating limit you set.

You can either temporarily unlock the program or select an unlocked program to watch.

Push 'MUTE' to enter PIN.

To temporarily unlock the program:

Press .

1無

Enter your four-digit PIN code and press . If

2無

the correct code is entered, the program lock mode is released and the normal picture appears. All locking is disabled until the TV is turned off, and will be enabled when the TV is turned on again.

Using the input lock feature

You can use the Input Lock feature to lock the video inputs (VIDEO 1, VIDEO 2, ColorStream HD, HDMI 1, HDMI 2, HDMI 3, HDMI 4, and PC) and channels 3 and

4. You will not be able to view the input sources or channels until you unlock the inputs.

To lock/unlock the video inputs:

From the Locks menu, Press q to display the PIN

1無

code entering screen.

Enter your four-digit PIN code and press .

2無

Press q to highlight Input Lock and press u to

3無

select the level of video input locking you prefer, as described below.

Using the GameTimer

You can use the GameTimer to set a time limit for playing a video game (30–120 minutes). When the GameTimer expires, the TV enters Input Lock mode and locks out the input source for the video game device.

To set the GameTimer®:

From the Locks menu, press q to display the PIN

1無

code entering screen.

Enter your four-digit PIN code and press .

2無

Press q to highlight GameTimer and press u to

3無

select the length of time until the Input Lock is activated (30, 60, 90, or 120 minutes).

To cancel the GameTimer®:

Select Off in step 3 above.

To deactivate the Input Lock once the GameTimer® has activated it:

Set the Input Lock to Off ( “Using the input lock

feature” as described).

Note:

A message will appear when 10 minutes,

• 3 minutes, and 1 minute remain on the

GameTimer.

If the TV loses power with time remaining on the

• GameTimer, when power is restored the TV will

enter Input Lock mode (as if the GameTimer had been activated) and you will have to deactivate the Input Lock (as described before).

Mode Description

Video

Video+

Off

4無

Locks VIDEO 1, VIDEO 2, ColorStream HD, HDMI 1, HDMI 2, HDMI 3, HDMI 4, and PC.

Locks VIDEO 1, VIDEO 2, ColorStream HD, HDMI 1, HDMI 2, HDMI 3, HDMI 4, PC and channels 3 and 4.

Select Video+ if you play video tapes

•

via an ANT/CABLE input.

Unlocks all video inputs and channels 3 and 4.

Press .

Using the control panel lock feature

You can lock the control panel to prevent your settings from being changed accidentally (by children, for example). When the control panel lock is On, none of the controls on the TV control panel will operate except POWER.

To lock the control panel:

Press and highlight the Locks menu icon.

1無

Press q to display the PIN code entering screen.

2無

Enter your four-digit PIN code and press .

3無

Press q to highlight Control Panel Lock.

4無

(continued)

40_46G300U1_EN-A5.indb 49 2010/3/2 上午 11:33:18

Chapter 6: Using the TV’s features

Press u to select On. When the control panel

5無

is locked and any button on the control panel (except POWER) is pressed, the message “NOT AVAILABLE” appears.

To unlock the control panel:

Select Off in step 5 above, or press and hold the VOLUME – button on the TV control panel for about

10 seconds until the volume icon appears.

Using the PC settings feature

You can view an image from a PC on the TV screen. When a PC is connected to the TV's PC IN terminal, you can use the PC Settings feature to make adjustments to the image. If the edges of the picture are cut off, readjust the Horizontal Position and Vertical Position. If the picture is affected by interference, readjust the Clock Phase and Sampling Clock.

To adjust the PC settings:

Repeatedly press to select PC input mode

1無

( “Selecting the video input source to view” page 35).

Press and open the Setup menu.

2無

Highlight PC Settings and press .

3無

Note: If a PC is not connected or there is no pc input signal, this feature will be grayed out in the Setup menu.

Press p or q to highlight the item you want to

4無

adjust. Press t or u to make the appropriate

5無

adjustments.

Note: The screen is disrupted momentarily when adjusting the PC settings. This is not a sign of malfunction.

Mode Description

Horizontal Position

Vertical Position

Clock Phase

Sampling Clock

Auto Adjust

The default settings may vary depending on

the input signal format.

Moves the picture left/right. The adjustment range is within ±50 from center.*

Moves the picture up/down. The adjustment range is within ±10 from center.*

Helps to reduce noise and sharpen the picture. The adjustment range is within ±16 from center.*

Helps to reduce noise and minimize periodic vertical stripes on the screen. The adjustment range is within ±10 from center.*

Highlight this item then press to get an optimum adjustment

automatically.

Setting the PC Audio

This function allows you to output or mute the sound from your PC when connecting using the PC IN terminal and an analog RGB cable. ( page 18)

To set the PC Audio:

Press and open the Sound menu.

1無

Highlight Audio Setup and press .

2無

Press p or q to select PC Audio and then press

3無

t or u to select No or Yes.

Yes: When viewing the PC input, the audio from

the PC Audio input can be heard. No: When viewing the PC input, there will be no audio.

Note: Because the PC and HDMI-1 inputs share the same set of analog audio inputs, the PC Audio menu setting influences the HDMI 1 Audio menu setting. If PC Audio

(continued)

40_46G300U1_EN-A5.indb 50 2010/3/2 上午 11:33:19

Chapter 6: Using the TV’s features

is set to “No,” the HDMI 1 Audio setting changes to “Auto.” If PC Audio is set to “Yes,” the HDMI 1 Audio setting is set to “Digital” and is grayed out in the menu. (Also see item 4 on page 12 and “Setting the HDMI® Audio mode” on page 33.)

Using the Media Player

Using the Media Player with USB

You can enjoy photos or music contents stored on a USB storage device.

Photo Viewer specifications:

Data type: JPEG Exif ver2.1 File format: JPEG Maximum photo size: 6 MB Maximum number of files: 500 / folder Maximum photo resolution: 4096 x 4096 pixels Best photo resolution: 1920 x 1080 pixels

Music Player specifications:

File format: MP3 Sampling frequency: 16 kHz, 22.05 kHz, 24 kHz, 32 kHz, 44.1 kHz, 48 kHz Bit rate: from 8 to 320 kbps Maximum number of files: 500 / folder

Supported file system:

FAT16 and FAT32

Note:

Gently insert the USB device into the port and

• do not remove while viewing Media Player.

USB device: USB Mass Storage Class device

• (MSC)

Connectivity is not guaranteed for all devices.

• Connect the USB device to the TV directly.

• Do not use a USB Hub.

• You must obtain any required permission from

• copyright owners to use copyright content.

Toshiba cannot and does not grant such permission. Depending on the file size and amount in your

• USB storage device, it may take some time

for loading to view. A message will display on-screen when loading files from the USB storage device.

To select the Auto Start function

Press and t or u to select the Setup menu.

1無

Press q to select Media Player, and then press .

2無

Select USB, and then press .

3無

Press p or q to select Auto Start.

4無

Press t or u to select On or Off.

5無

Note: The Auto Start function does not operate for the LAN port.

To open the Media Player

There are two kinds of methods to open the Media Player.

Automatically open:

Gently insert a supported USB storage device to

1無

the USB port on the side of the TV. A prompt will appear.

Note: If you repeatedly insert and remove the USB connector, the prompt may not appear.

Press t or u to select Yes, and then press .

2無

When the Auto Start function is On, the Media Player menu will appear. When you select No,

nothing happens.

Note: The prompt will disappear after about 6 sec.

Manually open:

Press and t or u to select the Setup menu.

1無

Press q to select Media Player, and then press

2無

Select USB, and then press .

3無

Press p or q to select Photo or Music then press

4無

Note:

The viewer will also open even if there are no

• photo or music files.

While the Media Player is active, the main

• menus cannot be displayed.

(continued)

40_46G300U1_EN-A5.indb 51 2010/3/2 上午 11:33:20

Chapter 6: Using the TV’s features

Viewing photo files

There are three types of view modes.

Multi View:

This view allows you to search for photos in a grid format. These pictures are displayed using thumbnail data in each image file.

Press pqtu to move the highlight in one

1無

window. If all of the photos will not fit in one screen, when pressing t at the top left thumbnail, the screen will move to the previous page. Conversely, when pressing u at the bottom right thumbnail, the screen will move to the next page.

buttons can be used to page up/down the

photo list when there are more photos than will fit onto one screen.

When you select a folder, press to move to

2無

the next layer. Press to move back to the previous layer.

Press to view the selected photo in Single

3無

View mode.

Single View

In this view mode, only files located in the selected directory shall be displayed. This view allows you to change the photo content manually. When moving from Multi View to the Single View, the currently selected photo shall be displayed.

Press u to view the next photo. Press t to view

1無

the previous photo.

Press p to rotate the image 90° clockwise. Press

2無

q to rotate the image 90° counterclockwise.

Slideshow

This view allows you to watch a slideshow of the photos. In this mode, only files located in the selected directory will be played.

To start slideshow, press in the Single View

1無

mode. Press t / u to view the previous/next photo.

2無

To set Interval Time and Repeat settings:

Press to open the Quick Menu.

1無

Press p or q to select either Interval Time or

2無

Repeat.

Presst or u to adjust the setting and press .

3無

To close the Photo Viewer

Press . The television will return to the last

1無

viewed channel or external input.

Playing music files

You can listen to music from a list of available files.

Press p q to select a file or folder.

1無

buttons can be used to page up/down the music list when there are more files than will fit onto one screen.

When you select a folder, press to move to

2無

the next layer. Press to move back to the previous layer.

With the desired file selected, press or to

3無

start playback.

Press to stop playback.

4無

Note:

If playback finishes before is pressed, the

• next file will automatically start to play from the

beginning.

Depending on the file size, it may take some

• time for playback to begin.

(continued)

40_46G300U1_EN-A5.indb 52 2010/3/2 上午 11:33:22

Chapter 6: Using the TV’s features

During playback

Press to pause.

•

To resume normal playback, press .

•

To locate a specific file, press or repeatedly.

•

To adjust volume , press

•

Note: During playback, you can adjust the SOUND menu functions from the QUICK menu.

To set the repeat mode:

Press to open the Quick Menu.

1無

Press t or u to select Off, All or 1.

2無

Press .

3無

To close the Music Player

Press .

1無

Viewing photo files with playing music files at same time

While viewing photo files, this allow you listen to music from a list of available files.

While viewing photo in the Single View or SlideShow

1無

mode, press to open the Quick menu.

Highlight Background Music and press , the

2無

music list will appear.

Select a music file and press to start playback.

3無

Press to move back the photo view mode,

4無

now the music is playing in the background.

Using a networked server PC

This TV is a DLNA CERTIFIED™ Player. This TV can play digital content stored on a DLNA CERTIFIED™ product with server function. To play the files from your DLNA server on the TV, you have to first complete the following:

Home network connection (page 20)

•

DLNA server installation (refer to the owner’s

•

manual of the DLNA recognition server) IP Address/Subnet Mask setup (page 56)

•

Note:

Connectivity is not guaranteed for all DLNA

• servers.

While some DLNA recognition servers are

• connected, it may take time until the device

after the second is displayed.

Photo Viewer specifications:

Data type: JPEG Exif ver.1.x or later, JFIF 1.02 File format: JPEG

Maximum photo size: 6 MB Maximum number of files: 500 / folder Maximum photo resolution: 4096 x 4096 pixels Best photo resolution: 1920 x 1080 pixels

Movie Viewer specifications

File format: Video: MPEG2(PS) NTSC, MPEG2(TS) SD Audio: LPCM / MPEG1-Layer1 / MPEG1-Layer2 / MPEG2 Layer2 Maximum number of files: 500 / folder

Music Player specifications:

File format: MP3 , LPCM Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz Bit rate: from 32 to 320 kbps Maximum number of files: 500 / folder

Using the Media Player with DLNA

Press and t or u to select the Setup menu.

1無

Press q to select Media Player, and then press

2無

Press p or q to selec the active device, and then

3無

press . Press p or q to select Photo, Music or Movie

4無

then press .

Note:

The viewer will also open even if there are no

• photo or music files.

While the Media Player is active, the main

• menus cannot be displayed.

To display device information

While the Photo list, Movie list or Music list is on

1無

the screen, press to open the Quick Menu. Press p or q to highlight Device Information,

2無

and then press .

DLNA®, the DLNA Logo and DLNA CERTIFIED™ are trademarks, service marks, or certification marks of the Digital Living Network Alliance.

Viewing photo files

( page 52)

Playing music files

( page 52)

(continued)

40_46G300U1_EN-A5.indb 53 2010/3/2 上午 11:33:24

Chapter 6: Using the TV’s features

Viewing movie files

You can select movies from a list of available files.

Press p q to select a file or folder.

1無

can be used to page up/down the movie list when there are more files than will fit onto one screen.

When you select a folder, press to move to

2無

the next layer. Press to move back to the previous layer.

With the desired file selected, press or to

3無

start playback.

Press to stop playback.

4無

Note: Depending on the file size, it may take some time for playback to begin.

During playback:

Press to pause.

•

To resume normal playback, press .

•

To locate a specific file, press or repeatedly.

•

To close the Movie Player

buttons

Contents Description Description

Photo

Photo list (Multi view)

Sorting (Only USB storage device)

See page 52.

To sort the folders and files

Press to open the Quick Menu

1無

from Multi View mode.

Press p or q to select Sort.

2無

Press t or u to select Title, New

3無

or Old to set the sorting rule. Title--File sorting rules:

1 Unicode priority 2 (0, 1, ..., 9), capital alphabet (A, B, ..., Z), small alphabet (a, b, ..., z), Chinese 3 Increasing order New--From new to old according to the date and time when the picture was taken. Old--From old to new according to the date and time when the picture was taken.

Device Information display

Single view mode

Slide Show mode

Skip to previous/next photo

Slideshow Repeat play

Slideshow Interval Time selection

See page 53

See page 52

Press .

1無

(continued)

40_46G300U1_EN-A5.indb 54 2010/3/2 上午 11:33:25

Chapter 6: Using the TV’s features

Contents Description Description

Movie

Movie list (Multi view)

Sorting (Only USB storage device)

See page 54.

To sort the folders and files

Press to open the Quick Menu

1無

in the movie list mode.

Press p or q to select Sort.

2無

Press t or u to select Title, New

3無

or Old to set the sorting rule.

Device Information display

Playback

NOTE: When a file is highlighted,

press or to start full screen playback.

Pause

Stop

Skip to previous/next video

SOUND Settings

See page 53

See page 54

See page 45

Contents Description Description

Music

Music list (Multi view)

Sorting (Only USB storage device)

See page 52.

To sort the folders and files

Press to open the Quick Menu.

1無

Press p or q to select Sort.

2無

Press t or u to select Title, New

3無

or Old to set the sorting rule.

Device Information display

Playback

Pause

Stop

Skip

Repeat play

SOUND Settings

Note: Sorting, Total Time display may not be available in all cases.

See page 53

See page 52

See page 53

See page 45

Setting up the network address for the LAN port

For information on connecting a home network, see page 20.

First, try automatically setting up the network

1無

address (page 56).

If the Auto Setup is not successful, you can either

2無

retry the Auto Setup or try manually setting up the network address.

Note:

If you used an Ethernet crossover cable to

•

connect your PC directly to the TV, you may not be able to use the automatic setup, and have to manually set up the network address. If you used a hub or switch to connect the

•

TV to your home network, you may not be able to use the automatic setup, and have to manually set up the network address. If you used a router with built-in DHCP

•

functionality, use the automatic setup. Manual setup may not work.

(continued)

40_46G300U1_EN-A5.indb 55 2010/3/2 上午 11:33:26

Chapter 6: Using the TV’s features

Auto Setup

Press and t or u to select the Setup menu.

1無

Press p or q to highlight Network Setup then

2無

press . Press q to highlight Auto Setup, and then press

3無

t or u to select On (default).

Network Setup

Auto S etup

IP Ad dress

Subne t Mask

MAC Ad dress

133 . 123 . 108 . 157

255 . 255 . 255 . 0

Manual Setup

This setup requires the data listed below. You can get this data from either your ISP or the configuration utility for your DSL/cable modem or router.

Press and t or u to select the Setup menu.

1無

Press p or q to highlight Network Setup, and

2無

then press . Press q to highlight Auto Setup, and then press

3無

t or u to select Off.

Press q to highlight IP Address field, and then

4無

use the Number buttons on the remote control to input the IP Address.

To set the sleep timer using the on-screen menus:

Press and open the Setup menu.

1無

Highlight Sleep Timer and press .

2無

Press the Number buttons to enter the length of

3無

time in 10-minute increments.

Highlight Done and press .

4無

Note: When a power failure occurs, the sleep timer setting may be cleared.

To display the remaining sleep time:

Press .

Note: A message will display on-screen when there is one minute remaining on the sleep timer.

To cancel the sleep timer:

Repeatedly press until it is set to 0 minute.

Using REGZA-LINK

This is a new feature that uses CEC technology and allows you to control Toshiba REGZA-LINK compatible devices from the TV remote via HDMI connection ( page 17).

When the Enable REGZA-LINK in the REGZALINK setup menu ( page 57) is set to On, the following REGZA-LINK functions will be enabled.

REGZA-LINK® playback device (DVD player, etc.) control

With your TV’s remote control, or using the REGZALINK Player Control menu, you can control the

Press q to highlight the Subnet Mask field, and

5無

then use the Number buttons to input the Subnet Mask.

Press .

6無

Setting the sleep timer

You can set the sleep timer to turn off the TV after a set length of time (maximum of 180 minutes).

To set the sleep timer using the remote control:

Press on the remote control to set the length of

time until the TV turns off. Repeatedly press to increase the time in 10-minute increments, or press p or q to increase or decrease the time in 10-minute increments, to a maximum of 180 minutes.

connected REGZA-LINK playback device you are watching.

Available remote control key functions:

Before using the following key functions, first set the MODE SELECT switch on the remote control to TV.

Button Description

Begins playback.

Stops playback.

Pauses the picture during play or record mode.

Skips forward.

Skips backward.

(continued)

40_46G300U1_EN-A5.indb 56 2010/3/2 上午 11:33:27

Chapter 6: Using the TV’s features

Fast-forwards.

Rewinds/reverses.

pqtu

Note: These functions depend on the devices connected.

Navigate contents menu, etc.

Enters contents menu, etc.

Returns to the previous menu.

REGZA-LINK® Player Control menu functions:

Press and open the Preferences menu.

1無

Highlight REGZA-LINK Player Control and press .

2無

Press p or q to select the item you want to

3無

control and press .

Item Description

Power Turns the select device on and off.

Root Menu

Contents Menu

Setup Menu

Top Menu Accesses the top menu of a DVD.

Menu Accesses the menu of a DVD.

Note:

These functions depend on the devices that are

•

connected. The REGZA-LINK Player Control item will be

•

grayed out in the following conditions:

A non-HDMI input is currently selected.

− The Enable REGZA-LINK item is set to Off.

− The connected CEC device is not a

− playback or recording device.

Accesses the top menu of the selected device.

Accesses the contents list when you press

. At this time, the REGZA-LINK Player

Control menu will disappear.

Accesses the setup menu of a DVD player.

REGZA-LINK® input source selection

If a REGZA-LINK device with HDMI switching capability (e.g. Audio Receiver) is connected to the HDMI input, you can select another REGZALINK device that is connected to the master HDMI device using the TV’s INPUT button. See page 35 for details.

VOLUME and MUTE controls of Audio Receiver

With your TV’s remote control, you can adjust or mute the sound volume of the Audio Receiver. First, set the MODE SELECT switch on the remote control to TV.

• adjust the volume level.

• turns off the sound.

Note:

To use this function:

•

Set Speaker Preference to Audio Receiver in

− the REGZA-LINK Setup menu.

Confirm that a connected REGZA-LINK device

− (such as DVD player, etc) is selected for the

Audio Receiver input source.

You can also use this function when the audio

• receiver is connected to the TV’s DIGITAL

AUDIO OUT terminal (not HDMI connection). In this case, select a digital audio input mode on the Audio Receiver.

These functions depend on the device

• connected.

Other REGZA-LINK® functions

When the Enable REGZA-LINK and each item in the REGZA-LINK Setup menu are set to On, the following

functions will be enabled.

Item Description

TV Auto Input Switch

TV Auto Power

Device Auto Standby

If a connected HDMI device starts playing video or audio, the TV will automatically switch to the appropriate HDMI input.

If a REGZA-LINK device is turned on, the TV turns on automatically.

If the TV is turned off the TV will send a message to turn off all of the REGZALINK devices connected to the TV.

(continued)

40_46G300U1_EN-A5.indb 57 2010/3/2 上午 11:33:28

Chapter 6: Using the TV’s features

From this item, you can set your audio output preference to the TV speakers or the audio receiver speakers. When

Speaker Preference

Note: When you turn on the Audio Receiver, change its input source, or adjust the sound volume, the sound will be output from the audio receiver’s speakers even if TV Speakers has been selected. Turn the TV off and on again to output the sound from the TV speakers.

this item is set to Audio Receiver, the TV remote can be used to adjust or mute the volume of the audio. This item will be grayed out unless a REGZA-LINK compatible audio receiver is connected.

To set the REGZA-LINK® Setup:

From the Setup menu, highlight REGZA-LINK

1無

Setup and press . Press p or q to highlight Enable REGZA-LINK.

2無

Press t or u to select On.

3無

Note: If you select Enable REGZA-LINK Off, the other items will be grayed out.

Press p or q to highlight the REGZA-LINK Setup

4無

item you want to use, and press t or u to select On or desired mode.

TV Auto Input Switch: On/Off

•

TV Auto Power: On/Off

•

Device Auto Standby: On/Off

•

Speaker Preference: TV Speakers/Audio Receiver

•

To save the new settings, highlight Done and press

5無

. To revert to the factory defaults, highlight

Reset and press .

Displaying TV status information

To display TV status information using RECALL:

Press on the remote control.

The following information will display (if applicable):

Current input (ANT/CABLE, VIDEO 1, etc.)

•

If ANT/CABLE is the current input, either “CABLE”

•

(for cable TV) or “ANT” (for over-the-air broadcasts). Channel number (if in ANT/CABLE mode)

•

Channel label (if set)

•

Digital signal strength indicator (bar graph in lower

•

right corner of box; for ATSC signal only)

Stereo, Mono or SAP audio status (when HDMI input

•

mode, Dolby Digital or PCM) Video resolution

•

Aspect ratio of incoming video signal (4:3 or 16:9)

•

V-Chip rating status

•

Game Timer (if set)

•

To close the RECALL screen:

Press again.

To display TV status information using INFO:

Press on the remote control.

The following additional information will display for off air digital channels (if applicable):

Title

•

Duration

•

Detailed description

•

Note:

The location of the banner can be moved

to the top or bottom of the screen by pressing p or q while the RECALL or INFO display is onscreen.

Understanding the auto power off feature

The TV will automatically turn itself off after approximately 15 minutes if it is tuned to a vacant channel or a station that completes its broadcast for the day. This feature functions in ANT/CABLE mode only.

Understanding the last mode memory feature

If the power is cut off while you are viewing the TV, the Last Mode Memory feature automatically turns on the TV when the power is resupplied.

Note: If it’s possible, and you will be away from the TV for an extended period of time you should unplug the power cord.

40_46G300U1_EN-A5.indb 58 2010/3/2 上午 11:33:29

Chapter 7: Using the TV’s advanced features

Using the advanced picture settings features

Using Dynamic Contrast

Dynamic Contrast detects changes in picture quality that affect the appearance of your contrast settings and then automatically adjusts the video.

To select Dynamic Contrast preference:

From the the Picture menu, highlight Picture

1無

Settings and press .

Highlight Advanced Picture Settings and press .

2無

Press p or q to select

3無

Press t or u to select

4無

Using the static gamma feature

The static gamma feature allows you to adjust the levels of black in the picture.

To adjust the static gamma settings:

Press and open the Picture menu.

1無

Highlight Picture Settings and press .

2無

Highlight Advanced Picture Settings and press .

3無

In the Static Gamma field, press t or u to

•

adjust the static gamma. The adjustment range is within ±5 from center. If the setting is moved in the minus direction,

•

the detail of black colors will be decreased. If the setting is moved in the plus direction, the

•

detail of black colors will be increased.

To save the new settings, highlight Done and

4無

press . To revert the factory defaults, highlight Reset

and press .

Note: If you select one of the factory-set picture modes (Sports, Standard, Movie or PC) and then change the static gamma setting, the picture mode automatically changes to Preference.

Dynamic Contrast

High

, Middle

, Low and Off.

Selecting the color temperature

You can change the quality of the picture by selecting from three preset color temperatures (Cool, Medium, and Warm), as described below.

Mode Picture Quality

Cool blueish

Medium neutral

Warm reddish

To select the color temperature:

Press and open the Picture menu.

1無

Highlight Picture Settings and press .

2無

Highlight Advanced Picture Settings and press

3無

Highlight Color Temperature and press .

4無

In the Color Temperature field, press t or u to select

5無

the mode you prefer (Cool, Medium, or Warm). Press p or q to select either B Drive or G Drive,

6無

and then press t or u to adjust the settings.

B Drive: u makes the picture blueish.

•

G Drive: u makes the picture greenish.

•

Note: The B Drive and G Drive settings are connected to the Color Temperature settings and will change based on which setting is selected in step 5 above.

To save the new settings, highlight Done and

7無

press . To revert to the factory defaults, highlight Reset

and press .

Note: If you select one of the factory-set picture modes (Sports, Standard, Movie, or PC) and then change the color temperature mode, the picture mode automatically changes to Preference.

(continued)

40_46G300U1_EN-A5.indb 59 2010/3/2 上午 11:33:31

Chapter 7: Using the TV’s advanced features

Selecting the cinema mode

When you view a DVD (3:2 pulldown processed) from a DVD player connected to the VIDEO 1, VIDEO 2, ColorStream HD (component video), or HDMI inputs on the TV, smoother motion can be obtained by setting the Cinema Mode to Film.

To set the Cinema Mode to Film:

(available for 480i and 1080i signals)

Press and open the Picture menu, highlight

1無

Picture Settings and press . Highlight Advance Picture Settings and press

2無

In the Cinema Mode field, select Film.

3無

To save the new settings, highlight Done and

4無

press . To revert to the factory defaults, highlight Reset

and press .

To set the Cinema Mode to Video:

Select Video in step 3 above.

Using the ClearFrame™ feature

The new ClearFrame 120 Hz anti-blur technology doubles the frame rate from 60 frames per second to 120 frames per second, virtually eliminating motion blur without adding flicker or reducing image brightness.

To turn on the ClearFrame:

Press and open the Picture menu, highlight

1無

Picture Settings and press .

Highlight

2無

In the ClearFrame field, select On.

3無

To save the new settings, highlight Done and

4無

press . To revert to the factory defaults, highlight Reset

and press .

Note:

If you select one of the factory-set picture

• modes (Sports, Standard, Movie or PC)

and then change the ClearFrame setting, the picture mode automatically changes to Preference. When ClearFrame is set to Off, the Film

• Stabilization feature will not be available

(grayed out and set to Off).

Advanced Picture Settings

and press .

Using the Film Stabilization feature

This feature helps to eliminate video shaking.

To turn on Film Stabilization:

Press and open the Picture menu, highlight

1無

Picture Settings and press .

Highlight Advanced Picture Settings and press .

2無

In the Film Stabilization field, select Smooth.

3無

To save the new settings, highlight Done and press .

4無

To revert to the factory defaults, highlight Reset and press .

Note:

If you select one of the factory-set picture

• modes (Sports, Standard, Movie or PC) and

then change the Film Stabilization setting, the picture mode automatically changes to Preference. When ClearFrame is set to Off, Film

• Stabilization will be grayed out and set to Off

automatically. When slow motion video is present the units will

• treat any scrolling text as Film and may cause

a slight jitter of the scrolling text. Tuning Off the Film Stabilization feature will correct this issue.

Using CableClear® digital noise reduction

The CableClear® digital noise reduction feature allows you to reduce visible interference in your TV picture. This may be useful when receiving a broadcast with a weak signal (especially a Cable channel) or playing a noisy video cassette or disc.

To change the CableClear settings:

Press and open the Picture menu, highlight

1無

Noise Reduction and press . In the CableClear field, select your desired setting.

2無

Note:

If the current input is ANT/CABLE, VIDEO

• 1, or VIDEO 2, the menu will display the text

“CableClear.” The available selections are Off, Low, Middle, and High. If the current input is ColorStream HD,

• HDMI 1, HDMI 2, HDMI 3 or HDMI 4, the

menu will display the text “DNR.” The available selections are Off, Low, Middle, and High. Low, Middle, and High will reduce the noise in varying degrees, from lowest to highest, respectively.

To save the new settings, highlight Done and

3無

press . To revert to the factory defaults, highlight Reset

and press .

(continued)

40_46G300U1_EN-A5.indb 60 2010/3/2 上午 11:33:32

Chapter 7: Using the TV’s advanced features

Using MPEG noise reduction

The MPEG noise reduction feature allows you to reduce visible interference caused by MPEG compression. Choices for MPEG noise reduction are Off, Low, Middle, and High. Off is automatically selected when this feature is disabled (“grayed out”).

To select the MPEG noise reduction level:

Press and open the Picture menu.

1無

Highlight Noise Reduction and press .

2無

Press p or q to highlight the MPEG Noise

3無

Reduction field, and then press t or u to select

either Off, Low, Middle or High.

To save the new settings, highlight Done and

4無

press . To revert to the factory defaults, highlight Reset

and press .

Using the Game Mode feature

You can use the Game Mode feature for shorter frame delays when playing a video game requiring split-second timing between the on-screen display and input from the controller (such as music creation and high-action games). This feature is more effective for 480i and 1080i input signals.

Note: To use the Game Mode feature, the current video input must be Video 1, Video 2,

ColorStream HD, HDMI 1, HDMI 2, HDMI 3 or HDMI 4. The Game Mode cannot be turned on

when any other video input is selected.

To turn on Game Mode:

Using the advanced audio settings features

Using the QSound® sound feature

QSound® is the original name for a positional three-

dimensional (3D) sound processing algorithm from QSound Labs that creates 3D audio effects from multiple monophonic sources and sums the outputs to two channels for presentation over regular stereo speakers.

To adjust the QSound® settings:

Put the TV in STEREO mode ( “Selecting

1無

stereo/SAP broadcasts” on page 45).

Press and open the Sound menu.

2無

Highlight Advanced Audio Settings and press .

3無

Press q or p to highlight the QSound feature,

4無

and then press t or u to turn the QSound effect On or Off.

To save the new settings, highlight Done and

5無

press . To revert to the factory defaults, highlight Reset

and press .

Note: If the broadcast is monaural, the QSound effect will not work.

Press and open the Picture menu, highlight

1無

the Game Mode. Press t or u to select On.

2無

To turn off Game Mode:

Select Off in step 2 above, change the video input, or turn the TV off and then on again.

Note: You can change the video input by pressing on the remote control ( page

35).

40_46G300U1_EN-A5.indb 61 2010/3/2 上午 11:33:32

Chapter 8: Troubleshooting

General troubleshooting

Before calling a service technician, please check this chapter for a possible cause of the problem and some

solutions you can try.

Black box on-screen

The closed caption feature is set to one of the Text

•

modes (T1, T2, T3, or T4). Set the closed caption feature to Off ( page 43).

TV stops responding to controls

If the TV stops responding to the controls on

•

the remote control or TV control panel and you cannot turn off the TV, please unplug the power cord few seconds then re-plug to try again.

Toshiba 46G300U1, 46G30U1, 40G300U1, 40G30U1 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual