Page 1
TOSHIBA
17
MEDIUM VOLTAGE DRIVES
MTX
NEMA 3R MV
NEMA 3R / UL Rain Tight Enclosure Ratings
4160 V at 500, 1000, and 1500 HP
50°C Ambient Rating
IEEE-519 Compliant / 36 Pulse Harmonic Cancellation
Additive PWM Output Allows Use with Standard / Existing Motors
Neutral Point Clamp Eliminates Common Mode Voltage
Innovative Design for Use in the Desert, Jungle, or Anywhere in Between
Reliability/n motion^
Page 2
MTX NEMA 3R MV
Horsepower
500 HP
1000 HP 107 x 168 x 63
1500 HP
Liquid Crystal Display/
Electronic Operator
Interface (LCD EOI )
LED Indications
Keys
Push Button
Analog Outputs
Analog Inputs
Digital Inputs
Digital Outputs
Enclosure
Panel Construction
Color
Ambient Temperature
Humidity
Altitude
Installation
Typical Applications
Standards
Components and Others
4 x 20 Graphical Backlit LCD Display. Ability to Display Multiple Parameters on one Screen.
Flash Upgradeable Software. Includes Multi-Function Rotary Encoder and Ethernet PC Interface
Run (Red) / Stop (Green), Remote / Local, Indication of Inverter Status
Local / Remote, Monitor/Program, Run, Enter, ESC, Stop / Reset, Up, Down
Illuminated Interlock and Fault Reset Push Buttons
Eight Selectable Voltage or Current Output Signals with Programmable Functions
Two Selectable Voltage or Current Input Signals
Eight Digital Inputs with Programmable Functions
Six Available Digital Outputs with Programmable Functions (One used internal to drive.)
Type 3R
Free Standing, Front-Maintenance Type, Top or Bottom Access for Motor and Power Cables
Bright White
0 to 50‘C
Maximum 95% (No Condensation)
1000 m Above Sea Level or Less
Outdoor
Fan, Blower, Pump, Compressor, Extruder, Options for Submersible Puming Applications
Electrical Performance: NEC, ANSI
NEC, NEMA, UL, CUL
**Typical HP rating of a 4 pole motor. Contact factory for applications on constant torque loads.
H x W x D (in) Weight (lb)
Construction
Ambient Conditions
15000
MTX - a New Benchmark
in Deliverable Medium
Voltage Technology
Toshiba proudly introduces the MTX N3R
Outdoor Medium Voltage ASD. The MTX is
the world's first ASD specifically designed for
outdoor mounting in remote applications or
applications where a building does not exist. It
features an innovative enclosure design and
power section topology that is unprecedented in
the medium voltage ASD arena.
The MTX is two enclosure types married
together. The transformer section is convection
cooled. There are no moving parts, and heat is
eliminated through passive vents at the top of
the drive. The inverter section is forced cooled.
Power modules are designed with the heat sinks
out-the-back to send waste heat to the
atmosphere. The interior of the inverter section
is cooled using plate-type heat exchanger(s)
so it remains cool and clean without introducing
outside air.
The new topology is a logical progression of the
proven T300Mvì design in a UL rain tight enclosure.
Additionally, you will achieve a lower cost of
ownership with the MTX because heat removal
from a building-based drive is eliminated.
ADJUSTABLE SPEED DRIVES MOTORS CONTROLS UPS INSTRUMENTATION PLC
TOSHIBA
Available Through:
TOSHIBA INTERNATIONAL CORPORATION
INDUSTRIAL DIVISION
13131 West Little York Road, Houston, Texas 77041
Tel 713/466-0277 Fax 713/466-8773
US 800/231-1412 Canada 800/872-2192 Mexico 01/800/527-1204
www.toshiba.com/ind
Copyright 10/2006
Loading...