Page 1
OWNER'S MANUAL
LCD Color TV
Introduction
Getting started
Basic operation
32WL58A
32WL58E
32WL58T
37WL58A
37WL58E
Features
Equipment
connections
Owner's Record
You will find the model number and serial number on
the back of the TV. Record these numbers in the spaces
provided below. Refer to them whenever you call upon
your TOSHIBA dealer regarding this product.
Model number:
Reference section
37WL58T
#01E01_32/37WL58AET 8/5/05, 3:43 PM1
Black
Serial number:
Toshiba 32/37WL58AET (E)
Page 2
Welcome to Toshiba
• Thank you for purchasing this Toshiba LCD Color Television. This manual will help you use the exciting features of
your new TV.
• Instructions in this manual are based on using the remote control.
•You can also use the controls on the TV if they have the same name as those on the remote control.
• Please read all the safety and operating instructions carefully, and keep the manual for future reference.
Contents
Introduction
Important Safety Instructions ................................. 3
Installation ........................................................... 3
Use ....................................................................... 5
Service ................................................................. 6
Cleaning ............................................................. 7
Important information............................................. 7
Important information ....................................... 7
Getting started
Installation ................................................................ 8
Connecting an antenna................................... 8
Exploring your new TV ............................................. 9
Installing the remote control batteries ............ 9
TV top, TV front .................................................... 9
TV back ............................................................... 10
Learning about the remote control ......................11
Location of controls ...........................................11
Turning the TV on, Selecting a language .............. 12
Switching on the TV ...........................................12
Switching off the TV............................................12
Selecting a language .......................................12
Learning about the menu system .........................13
Menu display chart ............................................ 13
Programming channel memory ............................14
System selection, Auto tuning ........................... 14
Manual tuning ....................................................14
Program sorting ..................................................16
Watching TV programs ........................................... 17
Volume, Sound mute, Changing program
positions, Program return, On-screen
information .........................................................17
Basic operation
Viewing the wide-screen picture format ............. 18
Picture size selection.......................................... 18
Picture position, Reset ............................................. 19
Picture position adjustment ..............................19
Reset (Picture position adjustment) .................19
Picture quality adjustment ..................................... 20
Picture quality adjustment ................................20
To activate the black stretch ........................... 21
To activate the MPEG NR (Noise Reduction) ...
To activate the DNR
(Digital Noise Reduction) ..................................21
To select the color temperature ...................... 22
To use the cinema mode ..................................22
To use the picture still .........................................22
To adjust the color management ....................23
To reset the base color adjustment ................. 23
Sound adjustment ...................................................24
MTS (Multi-channel TV Sound) setting..............24
Selecting the dual 1 or dual 2 mode ............... 24
Stereo/Bilingual selection.................................. 25
Sound quality adjustment .................................25
To select the audio output ................................ 26
To select the HDMI audio mode ...................... 26
21
To use the WOW surround sound......................27
To use the stable sound .....................................27
To activate/deactivate the speaker ...............27
Woofer internal/external mode, Bass boost,
Woofer system ....................................................28
Features
Input selection .........................................................29
Input selection ....................................................29
Timer, Gray screen...................................................30
Timer .................................................................... 30
To activate gray screen .................................... 30
Side panel adjustment ...............................................
Side panel adjustment ......................................31
To use the auto format ......................................31
Teletext – Setting up ................................................32
Teletext mode .................................................... 32
About Teletext.......................................................... 33
Teletext general information ............................ 33
Teletext SW adjustment .....................................33
Teletext – FAST and LIST modes .............................. 34
Using FAST mode ................................................34
Using LIST mode ..................................................34
Teletext – Control buttons.......................................35
Teletext buttons on the remote control...........35
BRIDGE MEDIA using................................................36
To use the BRIDGE MEDIA ..................................36
To use the BRIDGE MEDIA (still picture) ............37
To use the BRIDGE MEDIA (motion picture) ....40
To use the BRIDGE MEDIA (information) ..........43
Double-Window using.............................................44
To display the double-window ......................... 44
To select the headphone mode ......................45
To adjust the headphone volume
(Mode 2) .............................................................45
To use a headphone ......................................... 46
Equipment connections
Side connections ..................................................... 47
Connection example ........................................47
Back connections ................................................... 48
Connection example ........................................48
Connecting a computer ........................................49
To connect a computer ....................................49
PC setting .................................................................50
To adjust a PC setting ........................................50
Connecting an HDMI and a DVI device ..............52
To connect an HDMI and a DVI device ..........52
Reference section
Troubleshooting ....................................................... 53
Symptom and solution ......................................53
Broadcast system, Specifications ..........................54
Broadcast transmission systems of each
country or region ...............................................54
LCD color television ...........................................54
31
2
#01E02_32/37WL58AET 8/5/05, 3:43 PM2
Black
Toshiba 32/37WL58AET (E)
Page 3
Introduction
Important Safety Instructions
• Be sure to observe the following instructions and precautions to ensure safe use of this TV.
• The exact power cord will vary according to the country or region.
Installation
Always connect the power plug to an electrical outlet equipped with
A model: 220-240V, AC 50Hz, E model: 220-240V, AC 50/60Hz and T
model: 110-240V, AC 50/60Hz.
Never use the TV outside the specified voltage range. It may cause a fire
or an electric shock.
WARNING ABOUT THREE-WIRE GROUNDING-TYPE PLUG:
Never remove the earthing pin on the power plug. This system is
equipped with a three pin earthing-type power plug. This plug will
only fit an earthing-type power outlet. This is a safety feature. If you
are unable to insert the plug into the outlet, contact an electrician to
replace the wall outlet.
Never defeat the purpose of the earthing plug.
Never insert or remove the power plug with wet hands.
This may cause electric shock.
Check!
About the fuse
In a three pin earthing-type, the fuse fitted
in this plug is approved by ASTA or BSI to
BS1362. It should only be replaced by a
correctly rated and approved type and the
fuse cover must be refitted.
Introduction
Ex. 220-240V AC, 50/60Hz
Getting started
Basic operation
Never place the TV in an unstabilized location such as on a shaky
table, incline or location subject to vibration.
The TV may drop or fall down which may cause injury or damage.
Never block or cover the slots and openings in the cabinet.
• Never place the TV so that it is facing upward, or on its side.
• Never place the TV in a closet, bookshelf where the ventilation is poor.
• Never drape a newspaper, tablecloth or curtain on the TV.
• When installing the TV against a wall, always keep the TV at least 10
cm away from the wall.
• Never place the TV on a soft unstable surface, such as a carpet, or a
cushion.
The inside of this TV will overheat if the ventilation holes are covered,
blocked or sealed, which may result in a fire.
Never place the TV near a heater or in direct sunlight.
The surface of the cabinet or power cord may melt and result in fire or
electric shock.
Features
Equipment
connections
Reference section
#01E03-07_32/37WL58AET 8/5/05, 3:44 PM3
Black
3
Toshiba 32/37WL58AET (E)
Page 4
Introduction
Important Safety Instructions
Introduction
Installation (continued)
Never place the TV in an area exposed to high humidity levels, such as
in a bathroom or close to a humidifier.
This may cause a fire or an electric shock.
Never place the TV next to a stove where it will be exposed to oil,
smoke, or steam, or in a location where there is a large quantity of
dust.
This may cause a fire or electric shock.
(continued)
Install the TV in a horizontal, stable location. Connect between two
clips on the back of the TV and a wall, pillar, etc., with a sturdy tie
and clip of supplied accessories (see page 55).
• Use as short a tie as possible to ensure the TV is stable.
• If the TV is not installed securely, it may lean or fall over and cause an
injury.
Precautions for moving the TV
• When moving the TV, be sure to remove the power plug from the wall
outlet and disconnect the antenna cable and audio/video cables, any
steady ties. Fire or electric shock may result if the power cord is
damaged.
• When carrying the TV, at least two people are needed. Be sure to carry
it upright.
• Never carry the TV with the screen facing up or down.
Precautions for installing on outdoor antenna
An outside antenna system should not be located in the vicinity of
overhead power lines, or other electric light or power circuits.
If the antenna falls down or drops, it may cause injury or electric shock.
Sturdy tie
(as short as possible)
Clip
Clip
Side view Top view
Clip
4
#01E03-07_32/37WL58AET 8/5/05, 3:44 PM4
Black
Toshiba 32/37WL58AET (E)
Page 5
Use
Never place hot objects or open flame sources, such as lighted
candles or nightlights, on or close to the TV.
High temperatures can melt plastic and lead to fires.
The apparatus shall not be exposed to dripping or splashing and
that no objects filled with liquids, such as vases, shall be placed on
the apparatus.
When liquids are spilled or small items are dropped inside the TV, this
may cause a fire or an electric shock. If small objects drop inside the TV,
turn off the TV and remove the power plug from the outlet immediately
and contact a service technician.
Never insert objects (metal or paper) or pour water inside the TV
through ventilation holes and other openings.
These items may cause a fire or an electric shock.
If these objects are inserted inside the TV, turn off the TV and remove the
power plug from the outlet immediately and contact a service technician.
Be especially careful that children do not insert objects in the TV.
Introduction
Getting started
Basic operation
Features
Clip
Never stand or climb on the TV.
Be especially careful in households with children to prevent them
through climbing on top of the TV.
It may move, fall over, break, become damaged or cause an injury.
When the TV will not be used for a long period of time, such as
during vacation or travel, remove the power plug from the wall
outlet for safety.
Never pull on the power cord when removing the plug from the
wall outlet.
Always hold the plug firmly when removing it. If the power cord is
yanked, the cord may become damaged and fire or electric shock may
occur.
Equipment
connections
Reference section
#01E03-07_32/37WL58AET 8/5/05, 3:44 PM5
Black
5
Toshiba 32/37WL58AET (E)
Page 6
Introduction
Important Safety Instructions
Introduction
Use (continued)
Never cut, break, modify, twist, bunch up or bent the cord or apply
excessive force or tension to it.
Never place heavy objects on the cord or allow it to overheat as this may
cause damage, fire or electric shock. Contact a service technician if the
power cord is damaged.
If there is thunder or lightning, never touch the antenna cable or
other connected cables.
You may suffer an electric shock.
(continued)
Service
Never repair, modify or disassemble the TV by yourself.
If it may cause a fire or an electric shock. Consult a service technician for
inspection and repairs.
When a malfunction occurs, or if smoke or an unusual odor comes
from the TV, turn off the TV and remove the power plug from the
outlet immediately.
Make sure that the smoke or smell has stopped, then contact a service
technician. If the TV is still used in this condition, it may cause a fire or
an electric shock.
If the TV is dropped or the cabinet is broken, turn off the TV and
remove the power plug from the outlet immediately.
If the TV is still power used in this condition, it may cause a fire or an
electric shock. If the cabinet is broken, be careful when handling the TV
to prevent an injury. Contact a service technician for inspection and
repair.
6
#01E03-07_32/37WL58AET 8/5/05, 3:44 PM6
Black
Toshiba 32/37WL58AET (E)
Page 7
Introduction
Important Safety Instructions
(continued)
Important in formation
Service (continued)
When the TV reaches the end of its useful life, ask a qualified
service technician to properly dispose of the TV.
Note:
The lamp unit contains a small amount of mercury. Disposal of mercury
may be regulated due to environmental considerations.
Dispose of the used lamp unit by the approved method for your area. For
disposal or recycling information, please contact your local authorities.
Cleaning
Remove the power plug before cleaning.
Never use solvents such as benzine or thinner to clean the TV.
– These solvents may distort the cabinet or damage its finish.
– If rubber or vinyl products remain in contact with the TV for a long
time, a stain may result.
If the cabinet becomes dirty, clean it with a soft, dry cloth.
When cleaning the surface of the LCD display, wipe the panel surface
gently with a soft, dry cloth.
,
Introduction
Getting started
Basic operation
Features
Periodically disconnect the power plug from the outlet and check it.
If dust has collected on the power plug connectors, clean off the
dust.
This dust may cause a fire due to reduced insulation on the plug.
Clean here
Important information
About LCD screen
• If you have the LCD screen facing to the sun, the LCD screen will be damaged. Be aware of locating the TV in
the place such as window side or outside of the room.
• Never press the LCD screen strongly or scratch it, and never put anything on it. These actions will damage the
LCD screen.
About cabinet
• Never spray volatile compounds such as insecticide on the cabinet.
This may cause a discoloration or damage the cabinet.
Some pixels of the screen do not light up
• The LCD display panel is manufactured using an extremely high level of precision technology, however
sometimes some pixels of the screen may be missing picture elements or have luminous spots. This is not a
sign of a malfunction.
Equipment
connections
Reference section
About Interference
• The LCD display may cause interference in image, sound, etc. of other electronic equipment that receives
electromagnetic waves (e.g. AM radios and video equipment).
#01E03-07_32/37WL58AET 8/5/05, 3:45 PM7
Black
Toshiba 32/37WL58AET (E)
7
Page 8
Getting started
Important information
(continued)
,
Installation
Important information (continued)
About using under the low temperature places
•
If you use the TV in the room of 0°C or less, the picture brightness may vary until the
This is not a sign of a malfunction.
Getting started
About afterimage
• If a still picture is displayed, an afterimage may remain on the screen, however it will disappear.
This is not a sign of malfunction.
Exemptions
■ Toshiba is not liable for any damage caused by fires, natural disaster (such as thunder, earthquake, etc.), acts by third
parties, accidents, owner's misuse, or uses in other improper conditions.
■ Toshiba is not liable for incidental damages (such as profit loss or interruption in business, modification or erasure of
record data, etc.) caused by use or inability to use of product.
■ Toshiba is not liable for any damage caused by neglect of the instructions described in the owner's manual.
■ Toshiba is not liable for any damage caused by misuse or malfunction through simultaneous use of this product and
the connected equipment.
LCD
monitor warms up.
Connecting an antenna
Optimum reception of color requires a good signal and will generally mean that an outdoor antenna must be used.
The exact type and positioning of the antenna will depend upon your particular area.
Your Toshiba dealer or service personnel can best advise you on which antenna to use in your area.
Before connecting the antenna cable, turn off all main POWER switches.
Before connecting the antenna cable, remove the back terminal cover (see page 10).
VHF and/or
UHF antenna
300 Ω twin-lead feeder
75 Ω
Antenna adaptor
(not supplied)
75 Ω coaxial cable
Plug
(not supplied)
antenna
terminal
TV back view
75 Ω
antenna
terminal
8
#01E08-12_32/37WL58AET 8/5/05, 3:45 PM8
Black
Toshiba 32/37WL58AET (E)
Page 9
Getting started
Exploring your new TV
•You can operate your TV using the buttons on the top of the panel or the remote control. The back and side of the
panel provide the terminal connections to connect other equipment to your TV. See “Equipment connections” on
pages 47-52.
Installing the remote control batteries
Remove the battery cover.
Insert two R03 (AAA) batteries matching the –/+
polarities of the battery to the –/+ marks inside the
battery compartment.
Caution:
• Dispose of batteries in a designated disposal
area. Never throw batteries into a fire.
• Attention should be drawn to the environmental
aspects of battery disposal.
• Never mix battery types or combine used
batteries with new ones.
Effective range
within 5 m
Notes:
• If the remote control does not operate correctly,
or if the operating range becomes reduced,
replace both batteries with new ones.
• If the batteries are dead or if you will not use the
remote control for a long time, remove the
batteries to prevent battery acid from leaking
into the battery compartment.
Introduction
Getting started
Basic operation
Features
TV top, TV front
For the use of each control, see the pages in brackets.
TV top view
You can swivel the TV screen.
Swivel angle: 15 degrees to
left and right.
Input source
selection [29]
MENU [13]
Volume – + [17]
Menu [13]
Program position [17]
Menu [13]
Top view
Power [12]
/ Power switch
[12]
TV front view
On-timer indicator
(green) [30]
Remote sensor
Power indicator
(red) [12]
Equipment
connections
Reference section
#01E08-12_32/37WL58AET 8/5/05, 3:45 PM9
Black
9
Toshiba 32/37WL58AET (E)
Page 10
Getting started
Exploring your new TV
TV back
• Before connecting external equipment etc., remove the back terminal covers (squeeze tabs ( mark in the figure
below) and pull covers).
Getting started
(1) Video 1
input terminals
[48]
(continued)
Left side view
Right side view TV back view
Card into the slot [36]
Squeeze tab and pull here
to open the door.
(C1)
COMPONENT
VIDEO INPUT
terminals [48]
(C2)
COMPONENT
VIDEO INPUT
terminals [48]
WOOFER
OUT terminal
[28, 48]
AUDIO
OUT terminals
[48]
(Fixed/Variable)
MONITOR
OUT terminals
[48]
Antenna input
[8]
Right side
view
Video 2 input
terminals [47]
Headphone jack
(3.5 mm, stereo)
(2)
Power cord
Cable holder*
Back view
RGB/PC
(AUDIO)
input [49]
Headphones [45]
(Not supplied)
RGB/PC
input [49]
HDMI 2
input terminal [52]
HDMI 1
input terminal [52]
HDMI 2 AUDIO
input terminals [52]
HDMI 1 AUDIO
input terminals [52]
*You can use the cable holder to hold antenna cable, video and audio cables etc.
When moving the TV, never hold this holder.
10
#01E08-12_32/37WL58AET 8/5/05, 3:46 PM10
Black
Toshiba 32/37WL58AET (E)
Page 11
Getting started
Learning about the remote control
Location of controls
For the use of each control, see the pages in brackets.
Introduction
Teletext on/off [33 – 35]
CALL [15, 17]
Initial/index function for Teletext [35]
To return to the previous program [17]
Picture mode selection [20]
MENU [13]
DVD MENU
• Menu [13]
• Volume – + [17, 44]
OK [13, 29]
Stereo/bilingual selection [25]
Mode switch
TV : To control TV
VCR : To control VCR
DVD : To control DVD
CALL
21 3
54 6
87 9
0
MENU EXIT
DVD
MENU
TV
VCR
DVD
DVD
P
OK
P
Power on/Standby [12]
(For Toshiba TV/VCR/DVD)
Number buttons (0-9) [17, 30]
• Input source selection [29]
( 1, 2, C1, C2,
HDMI 1, HDMI 2, PC, BM)
• To access sub-pages when in
teletext [33]
Picture size selection [18]
EXIT [13]
• Menu [13]
• Program position [17]
• Teletext [34]
• P [44]
• Teletext control buttons [34]
(Four colored buttons: Red,
Green, Yellow, Blue)
• BRIDGE MEDIA [37-43]
• Bass boost on/off [28]
• External woofer on/off [28]
Sound mute [17]
Getting started
Basic operation
Features
Equipment
connections
When in VCR or DVD mode:
(Only for Toshiba VCR/DVD
players)
to EJECT
to REWIND
to PLAY
to FAST FORWARD
to PAUSE
to SKIP-REWIND
to STOP
to SKIP-FORWARD
#01E08-12_32/37WL58AET 8/5/05, 3:46 PM11
Black
CT-90241
When in Teletext mode:
? To reveal concealed text [35]
v To hold a wanted page [35]
^
To enlarge teletext display size [35]
y/X
When in TV mode:
y/X
To select a page while viewing
a normal picture [35]
To select the time display [35]
Double-Window on/off [44]
Picture STILL [22, 44]
n Double-Window
sound selection [44]
picture/
11
Toshiba 32/37WL58AET (E)
Reference section
Page 12
Getting started
Turning the TV on, Selecting a language
• Connect the power cord to a wall outlet.
Switching on the TV
Getting started
TV top view
CALL
21 3
54 6
87 9
0
Press the / POWER switch
on the TV left side until it
1
Mono
clicks.
The Power ON indicator lights in red. Press the button on
the remote control or on the TV top panel if no picture
appears.
Switching off the TV
Press the button on the remote control or on the TV top
panel to switch to the standby mode.
To switch the TV off, press the / POWER switch on the TV
left side .
Power indicator will be turned off.
Notes:
• This TV is not full disconnected from the main supply, as minute
current is consumed even when the / POWER switch is turned
off.
When the TV will not be used for a long period of time, such as
during vacation or travel, remove the power plug from the wall
outlet.
• The TV will automatically turn itself off after approximately 15
minutes if it is tuned to a vacant channel or a station that
completes its broadcast for the day. This function does not work
in external input or Gray screen Off mode.
• If power is cut off while you are viewing the TV, the Last Mode
Memory function turns on the TV automatically when power is
applied again. If power is going to be off for a long time and you
are going to be away from your TV, unplug the power cord to
prevent the TV from tuning on in your absence.
MENU EXIT
DVD
MENU
P
OK
P
Note:
If you watch black and white programs
when the color system mode is set to Auto,
color noise may appear on the screen. In
this case select the appropriate Color
system (For the system of each country or
region, refer to pages 15 and 54).
12
#01E08-12_32/37WL58AET 8/5/05, 3:46 PM12
Black
Selecting a language
Choose from 9 different languages (English, Chinese (CS), Malay,
Thai, Vietnamese, Russian, Arabic, Persian or French) for the onscreen display.
Press the MENU button, then press the or button to
display the SET UP menu.
Press the or button to
select Language.
Press the or button to
select the desired language.
Language
Auto tuning
Manual tuning
Program sorting
AV connection
Picture position
MENU
Toshiba 32/37WL58AET (E)
SET UP
EXIT
Back Watch TV
English
OK
OK
OK
OK
OK
Page 13
Getting started
Learning about the menu system
•We suggest you familiarize yourself with the display charts before using the menu system:
•Press the MENU button to display menu, then press the or button to select main menu headings.
•Press the or button to select an item.
•Press the or button to select or adjust setting.
•Press the OK button to display the next menu.
Menu display chart
PICTURE
menu
Picture settings
Color management
Base color adjustment
Cinema mode
MENU
PICTURE
EXIT
Back Watch TV
Black stretch
OK
Off
On
Picture settings
Color management
Base color adjustment
Cinema mode
MENU
PICTURE
EXIT
Back Watch TV
OK
Off
On
MPEG NR
DNR
Color Temperature
Back light
Contrast
Brightness
MENU
Color
Tint
Sharpness
MENU
Picture settings
Picture settings
EXIT
Back Watch TV
EXIT
Back Watch TV
On
Low
Auto
Normal
100
100
50
50
0
0
2/2
1/2
Contrast 100
Introduction
Getting started
SOUND
menu
MTS
Dual
Headphone
Headphone level
Bass
Treble
MENU
SET UP
menu
Language
Auto tuning
Manual tuning
Program sorting
AV connection
Picture position
MENU
TIMER
menu
Sleep timer
On timer
On timer Position
MENU
FUNCTION
menu
Teletext
Teletext SW
Auto format
Gray screen
Side panel
MENU
SOUND 1/ 2
EXIT
Back Watch TV
SET UP
EXIT
Back Watch TV
TIMER
EXIT
Back Watch TV
FUNCTION
EXIT
Back Watch TV
Auto
Dual 1
Mode1
0
0
English
OK
OK
OK
OK
OK
00:00
00:00
01
FAST
1
On
On
1
Balance
Speaker
MTS
Dual
Headphone
Headphone level
Bass
Treble
MENU
Language
Auto tuning
Manual tuning
Program sorting
AV connection
Picture position
MENU
Sleep timer
On timer
On timer Position
MENU
Teletext
Teletext SW
Auto format
Gray screen
Side panel
MENU
EXIT
Back Watch TV
EXIT
Back Watch TV
EXIT
Back Watch TV
FUNCTION
EXIT
Back Watch TV
SOUND 2/ 2
SOUND 1/ 2
SET UP
TIMER
Auto
Dual 1
Mode1
0
0
English
OK
OK
OK
OK
OK
00:00
00:00
01
FAST
1
On
On
1
0
On
Notes:
•
In the video input mode ( 1, 2, C1, C2,
HDMI 1, HDMI 2), Auto tuning, Manual tuning and
Program sorting are not available. Instead, Manual
setting appears in the SET UP menu (see page 29).
• If you connect external equipment via component
video source to external input, Color system selection
in the Manual setting menu is not available.
• If you do not make a selection for a while, the menu
display disappears automatically.
• If you want to close the menu display instantly, press
the EXIT button except for the BRIDGE MEDIA
function (see page 36).
•To return to the previous menu, press the MENU
button except for the BRIDGE MEDIA function (see
page 36).
• The buttons function as the Program position
P / P buttons when there is no menu display on
the screen.
• The buttons function as the Volume +/ –
buttons when there is no menu display on the screen.
• In the PC input mode, PC Setting appears in the SET
UP menu (see page 29).
• In the 480i or 576i input signals mode, you can select
the Cinema mode in the PICTURE menu (see page
22).
• When you use the color management function (see
page 23), you can select the Base color adjustment in
the PICTURE menu.
• When you use the double-window function (see page
45), you can select the Headphone level in the
SOUND menu.
Basic operation
Features
Equipment
connections
Reference section
#01E13-17_32/37WL58AET 8/5/05, 3:47 PM13
Black
13
Toshiba 32/37WL58AET (E)
Page 14
Getting started
Programming channel memory
• First, use the Auto tuning function to preset all the active channels in your area automatically. Then, arrange the preset
channels with the Manual tuning function so that you can tune into only desired channels.
•
Use the Manual tuning operation if desired channels cannot be preset with the Auto tuning or if you would like to
preset channels to specific position numbers one by one.
System selection, Auto tuning
Getting started
CALL
MENU
DVD
MENU
21 3
54 6
87 9
0
P
OK
EXIT
Press the MENU button, then
press the or button to
display the SET UP menu.
Press the or button to
select Auto tuning.
Press the OK button to display
the Auto tuning menu.
Press the OK button to start the
automatic search.
The search will begin for all
Language
Auto tuning
Manual tuning
Program sorting
AV connection
Picture position
MENU
Press OK key to start.
!
EXIT for no change.
MENU
Searching
Pos :2
EXIT
SET UP
EXIT
Back Watch TV
Auto tuning
EXIT
Back Watch TV
Auto tuning
Stop
English
OK
OK
OK
OK
OK
available stations.
The slide bar will move along the line as the search
progresses.
If you make a mistake, simply repeat steps 1-4 to start again
from the beginning.
When the automatic search is complete, the TV will
automatically return to the first program position.
Press the P or P button to view the programmed
position.
TV
VCR
DVD
P
Manual tuning
Press the MENU button, then
press the or button to
display the SET UP menu.
Press the or button to
select Manual tuning.
Press the OK button to display
the Manual tuning menu.
Press the or button to
select the program position you
want to arrange.
Press the OK button to display
the breakdown menu.
Press the or button to
select an item, then press the
or button to select the item as
shown below and on the next
page.
Language
Auto tuning
Manual tuning
Program sorting
AV connection
Picture position
MENU
Prog. Sys. Label
1
2
3
4
5
6
OK
Select
MENU
1
OK
Store
MENU
A
SET UP
EXIT
Back Watch TV
Manual tuning
B/G
B/G
B/G
B/G
B/G
B/G
Manual tuning
A
C
D
EXIT
Program
EXIT
E
F
G
Back Watch TV
B/G
Back Watch TV
B
English
OK
OK
OK
OK
OK
H
14
#01E13-17_32/37WL58AET 8/5/05, 3:47 PM14
Black
A. Program position selection
B. Sound system (see page 54)
Toshiba 32/37WL58AET (E)
Page 15
Manual tuning (continued)
CALL
21 3
54 6
87 9
0
MENU
DVD
MENU
TV
VCR
DVD
P
OK
P
EXIT
C. Color system (see page 54)
A : Automatic (factory setting), P : PAL, S : SECAM
N4 : NTSC 4.43 (MHz), N3 : NTSC 3.58 (MHz)
If the color of a certain channel is abnormal, the automatic
color system selection (A) may have malfunctioned, or
sound system selection is wrong. In such a case, select
another color and/or sound system (see page 54).
D. Program position skip selection
Press the or button to turn the program position skip
option on “ ” or off “ ”.
The program position will then be skipped when you
select channels with the P or P button.
The “ ” mark will appear beside a program position
number when you use the Number button on the remote
control.
E. Channel search operation
Press the button to search up the band or the button
to search down the band.
Press the or button repeatedly until your desired
channel is displayed.
When a station/satellite is found, it will be displayed.
NEVER PRESS ANY OTHER BUTTONS WHILE THE
SET IS TUNING.
F. Auto Fine Tuning
Press the or button to turn the Auto Fine Tuning
option on “ ” or off “0”.
The Auto Fine Tuning function automatically corrects
slight fluctuations when receiving signals.
Manual Fine Tuning
While the Auto Fine Tuning turn off “0”, press the or
button so that the better picture and sound are obtained.
G. ANT ATT (Antenna attenuator)
Press the or button to turn the ANT ATT option on
“ ” or off “ ”, when visual interference occurs, set the
ANT ATT to on.
H. Label
Station labels appear under the program position display
each time you turn on the TV, select a channel, or press
the CALL button.
Introduction
Getting started
Basic operation
Features
Equipment
connections
#01E13-17_32/37WL58AET 8/5/05, 3:47 PM15
Black
To change or create station labels:
1) Press the or button repeatedly to select a
character for the first space, then press the button.
Reference section
*(blank space)
2) Repeat step 1) to enter the rest of the characters. If you
would like a blank space in the label name, you must
choose a blank space from the list of characters.
Press the OK button to store your settings.
15
Toshiba 32/37WL58AET (E)
Page 16
Getting started
Programming channel memory
• This TV is capable of receiving a number of different channels depending upon where you live.
•Program sorting is an easy way of storing each channel on the program position of your choice.
Program sorting
Getting started
CALL
21 3
54 6
87 9
0
(continued)
Ex.: To swap channel ABCD (Prog.1) for channel MNOP (Prog.4):
Press the MENU button, then
press the or button to
display the SET UP menu.
Press the or button to
select Program sorting.
Press the OK button to display
the Program sorting menu.
Press the or button to
select the channel ABCD, then
press the button.
Language
Auto tuning
Manual tuning
Program sorting
AV connection
Picture position
MENU
Prog. Label
1
2
3
4
5
6
Select
MENU
SET UP
EXIT
Back Watch TV
Program sorting
Back Watch TV
ABCD
EFGH
IJKL
MNOP
EXIT
English
OK
OK
OK
OK
OK
MENU
DVD
MENU
TV
VCR
DVD
P
OK
P
EXIT
Press the button to select the
new position “4”, then press
the button.
Press the button to select the
channel MNOP, then press the
button.
Press the button to select the
new position “1”, then press
the button.
Confirm new sorting list.
Prog. Label
Prog. Label
Program sorting
1
2
3
4
5
6
Sort Store
MENU
Back Watch TV
Prog. Label
1
2
3
4
5
6
Sort Store
MENU
Back Watch TV
1
2
3
4
5
6
Select
MENU
Back Watch TV
EFGH
IJKL
MNOP
EXIT
Program sorting
EFGH
IJKL
ABCD
EXIT
Program sorting
MNOP
EFGH
IJKL
ABCD
EXIT
ABCD
MNOP
16
#01E13-17_32/37WL58AET 8/5/05, 3:48 PM16
Black
Toshiba 32/37WL58AET (E)
Page 17
Getting started
Watching TV programs
Volume, Sound mute, Changing program positions, Program return, On-screen information
Introduction
TV top view
CALL
MENU
DVD
MENU
21 3
54 6
87 9
0
P
EXIT
To alter the volume:
Press the + or – button
to raise or lower the volume.
Volume 30
To mute the sound:
Press the button. The word
Sound mute
screen.
appears on the
Sound mute
Press the button again to
restore the sound.
To change program position:
Enter the desired program
position number using the
Number buttons on the remote
control.
For program positions below 10, use 0 and the required
number e.g., for program position 1.
You can also change the program position by using the P or
P button.
The program position will be displayed on the screen with
the Mono/Stereo/Dual audio status.
1
MNOP
Getting started
Basic operation
Mono
Features
OK
P
TV
VCR
DVD
Note:
The program position selection change
between different format channels takes
several seconds.
To switch between two program positions:
You can switch two program positions without entering actual
position number each time.
Select the first program
position you want to view.
EFGH2
Select the second program
position with the Number
buttons (0-9).
IJKL3
Press the button. The
previous channel will be
displayed.
Each time you press the button, the TV will switch back and
forth between the two program positions.
To display the on-screen information:
Press the CALL button to
display the following on-screen
information.
The information will disappear
in 6 seconds.
•Program position or external input mode selected
•Program skip on/off information
• Label (if set)
• Mono/Stereo/Dual audio status
To erase the display instantly, press the CALL button again.
ABCD4
Stereo
Dual
Stereo
Equipment
connections
Reference section
#01E13-17_32/37WL58AET 8/5/05, 3:48 PM17
Black
17
Toshiba 32/37WL58AET (E)
Page 18
Basic operation
Viewing the wide-screen picture format
• This TV is capable of showing broadcasts in a number of formats. Depending on the type of broadcast being
transmitted, you may select between Super live, Cinema, Subtitle, 14:9, Wide and 4:3.
Picture size selection
Press the button repeatedly to view the options available.
Super live
This setting will enlarge the 4:3
image to fit the screen by
CALL
21 3
stretching the image vertically and
horizontally, holding the correct
proportions at the center of the
image.
Basic operation
54 6
87 9
0
MENU
DVD
MENU
Notes:
• Using the special functions to change
the size of the displayed image (e.g.
changing the height/width ratio) for the
purpose of public display or
commercial gain may infringe on
copyright laws.
• In the 720p/1080i input signals mode,
the picture size selection is wide only.
• If the aspect ratio of the selected format
is different from the one of the TV
transmission or video program, it can
cause a difference in vision. Change to
the correct aspect ratio picture size.
• In the BRIDGE MEDIA (see page 29)
and PC mode (see page 29), the picture
size selection is wide or 4:3 only.
P
OK
P
EXIT
Cinema
When watching “letterbox format”
films/video tapes, this setting will
eliminate or reduce the black bars
at the top and bottom of the screen
by zooming in and selecting the
image without distortion.
Subtitle
When subtitles are included on a
letterbox format broadcast, this
setting will raise the picture so that
the most of text is displayed.
14:9
Use this setting when watching a
14:9 broadcast.
Wide
Use this setting when watching a
wide-screen DVD, wide-screen
video tape or a 16:9 broadcast
(when available). Due to the range
of wide-screen formats (16:9, 14:9,
20:9 etc.), you may see bars on the
top and bottom of the screen.
4:3
Use this setting to view a true 4:3
broadcast.
Subtitle
Subtitle
18
#01E18-28_32/37WL58AET 8/5/05, 3:48 PM18
Black
Toshiba 32/37WL58AET (E)
Page 19
Basic operation
Picture position, Reset
Picture position adjustment
Adjustment to the position of the picture may be made to suit your
viewing preferences.
Introduction
CALL
MENU
DVD
MENU
21 3
54 6
87 9
0
P
OK
P
EXIT
To adjust the picture position:
Press the MENU button, then
press the or button to
display the SET UP menu.
Press the or button to
select Picture position.
Press the OK button to display
the Picture position menu.
Language
Auto tuning
Manual tuning
Program sorting
AV connection
Picture position
MENU
Horizontal position
Vertical position
Reset
The menu will vary depending
upon the widescreen format
you have previously chosen.
MENU
Press the or button to
select an item you want to
adjust.
Press the or button to
Horizontal position 0
adjust the settings as required.
Reset (Picture position adjustment)
SET UP
EXIT
Back Watch TV
Picture position
EXIT
Back Watch TV
English
OK
OK
OK
OK
OK
0
0
OK
Getting started
Basic operation
Features
TV
VCR
DVD
Notes:
• When the picture format is in Wide or
4:3 mode, only the Horizontal position
can be adjusted.
• The picture position adjustment is not
available for 720p/1080i input signals.
This function resets your picture position settings to the factory
settings.
To reset the picture position:
Press the MENU button, then
press the or button to
display the SET UP menu.
Press the or button to
select Picture position, then
press the OK button.
Press the or button to
select Reset, then press the OK
button.
Language
Auto tuning
Manual tuning
Program sorting
AV connection
Picture position
MENU
Horizontal position
Vertical position
Reset
MENU
SET UP
EXIT
Back Watch TV
Picture position
EXIT
Back Watch TV
English
OK
OK
OK
OK
OK
0
0
OK
19
Equipment
connections
Reference section
#01E18-28_32/37WL58AET 8/5/05, 3:49 PM19
Black
Toshiba 32/37WL58AET (E)
Page 20
Basic operation
Picture quality adjustment
Picture quality adjustment
To select the picture mode:
You can select the picture quality instantly among three preset
modes and one user-set mode.
Basic operation
CALL
MENU
DVD
MENU
TV
VCR
DVD
21 3
54 6
87 9
0
P
OK
P
EXIT
•Press the button to select
the desired picture quality.
Dynamic, Standard, Mild and
Memory (user-set) can be selected
cyclically.
Dynamic
Mode Picture quality
Dynamic bright and dynamic picture
Standard standard picture
Mild soft picture
Memory the picture quality you set
Note:
In the PC input mode (see page 29), this mode is not available.
To adjust the basic picture quality:
Press the MENU button, then
press the or button to
display the PICTURE menu.
Press the or button to
select the Picture settings
menu, then press the OK
button.
Press the or button to
select Contrast, Brightness,
Color, Tint or Sharpness, then
press the or button to
adjust the level.
Back light
Contrast
Brightness
Color
Tint
Sharpness
MENU
Contrast 100
Picture settings
EXIT
Back Watch TV
100
100
1/2
50
50
0
0
Notes:
• The Tint may only be adjusted on a tape
which has been recorded and played
back on an NTSC VCR.
• In the PC input mode (see page 29),
Color, Tint and Sharpness modes are
not available.
20
#01E18-28_32/37WL58AET 8/5/05, 3:49 PM20
Black
Selection Pressing
Back light darker lighter
Contrast lower higher
Brightness darker lighter
Color paler deeper
Tint reddish greenish
Sharpness softer sharper
Toshiba 32/37WL58AET (E)
Page 21
To activate the black stretch
CALL
21 3
54 6
This function increases the strength of dark areas of the picture
which improves definition.
From the Picture settings
menu, press the or button
to select Black stretch on the
2nd page.
Press the or button to
select On or Off.
Black stretch
MPEG NR
DNR
Color Temperature
MENU
Black stretch
Picture settings
EXIT
Back Watch TV
Normal
On
Low
Auto
On
Introduction
2/2
Getting started
MENU
DVD
MENU
TV
VCR
DVD
87 9
0
P
OK
P
EXIT
Note:
In the PC input mode (see page 29), this mode is not available.
To activate the MPEG NR (Noise Reduction)
If the receiving signal of MPEG is a mosquito (grained) noise
depending on the compression and conversion, the noise may be
reduced when using this function.
From the Picture settings
menu, press the or button
to select MPEG NR on the 2nd
page.
Press the or button to
Black stretch
MPEG NR
DNR
Color Temperature
MENU
MPEG NR
Picture settings
EXIT
Back Watch TV
On
High
Auto
Normal
High
select Off, Low, Middle or
High.
Note:
In the PC input mode (see page 29), this mode is not available.
To activate the DNR (Digital Noise Reduction)
2/2
Basic operation
Features
Equipment
connections
#01E18-28_32/37WL58AET 8/5/05, 3:49 PM21
Black
If the receiving signal is weak and the picture is blurry, the picture
may be improved when using this function.
From the Picture settings
menu, press the or button
to select DNR on the 2nd page.
Press the or button to
Black stretch
MPEG NR
DNR
Color Temperature
MENU
DNR
Picture settings 2/2
EXIT
Back Watch TV
On
High
Auto
Normal
Auto
select Auto, Low, Middle, High
or Off.
Note:
This function is available for 480i and 576i signals.
21
Toshiba 32/37WL58AET (E)
Reference section
Page 22
Basic operation
Picture quality adjustment
To select the color temperature
Cool : Lends a blue hue to the picture.
Normal : Neutral
Warm : Lends a red hue to the picture.
54 6
87 9
0
Basic operation
MENU
DVD
MENU
P
EXIT
(continued)
You can change the tone of the picture by selecting from three preset
color temperatures: Cool, Normal or Warm.
Press the MENU button, then
press the or button to
display the PICTURE menu.
Press the or button to
select the Picture settings menu,
then press the OK button.
Press the or button to select
Color Temperature on the 2nd
page, then press the or
button to select mode you prefer.
To use the cinema mode
Black stretch
MPEG NR
DNR
Color Temperature
MENU
Color Temperature
Picture settings 2/2
EXIT
Back Watch TV
On
Low
Auto
Normal
Normal
OK
P
TV
VCR
DVD
Notes:
• When a DVD movie with subtitle is
playing back, the Cinema mode may
not work correctly.
• If you use the picture still function
except for the purpose of your private
viewing and listening, it may infringe
the copyright protected by the
copyright laws.
• In the PC and BRIDGE MEDIA input
modes (see page 29), the picture still
function is not available.
A movie film’s picture runs at 24 frames a second, whereas movie
software such as DVD, etc., that you enjoy watching on television at
home runs at 30 (NTSC) or 25 (PAL) frames a second. To convert
this signal to reproduce a smooth motion and picture quality, select
the On mode.
Effective signal and setup conditions
• When the Video input mode is selected.
• When the input signal format is 480i and 576i signals.
Press the MENU button, then
press the or button to
display the PICTURE menu.
Press the or button to
Picture settings
Color management
Base color adjustment
Cinema mode
PICTURE
OK
Off
On
select Cinema mode, then press
the or button to select On
or Off.
MENU
Cinema mode
EXIT
Back Watch TV
On
To use the picture still
Press the button to freeze the picture.
Even if an image is frozen on the TV screen, the pictures are running
on the input source. Audio continues to be output as well.
To return to a moving picture, press the button again.
(Moving) (Still)
22
#01E18-28_32/37WL58AET 8/5/05, 3:50 PM22
Black
Toshiba 32/37WL58AET (E)
Page 23
To adjust the color management
CALL
21 3
54 6
87 9
0
MENU
DVD
MENU
P
OK
P
EXIT
You can adjust the picture color quality by selecting from 6 base
color adjustments : Red, Green, Blue, Yellow, Magenta, Cyan.
From the PICTURE menu,
press the or button to
select Color management.
Press the or button, then
Picture settings
Color management
Base color adjustment
Cinema mode
MENU
Color management
PICTURE
EXIT
Back Watch TV
OK
Off
On
press the or button to
select On.
Press the OK button, then press
the or button to select
Base color adjustment.
Press the OK button, then press
Picture settings
Color management
Base color adjustment
Cinema mode
PICTURE
OK
OK
the or button to select an
item you want to adjust.
Press the button, then press
the or button to select
Hue or Saturation.
MENU
Back Watch TV
Base color adjustment
Red
Green
Blue
Yellow
Magenta
Cyan
Reset
MENU
Back Watch TV
EXIT
EXIT
Hue
Saturation
0
0
0
0
0
0
OK
Introduction
Getting started
On
Basic operation
On
On
On
Features
0
0
0
0
0
0
TV
VCR
DVD
Notes:
• If you select color management Off
mode, this mode is not available.
• In the PC input mode (see page 29), this
mode is not available.
Press the or button to
adjust the settings as required.
Red
Hue
Saturation
0
0
To reset the base color adjustment
The Reset function adjusts the base color adjustment to the factory
settings.
From the Base color adjustment
menu, press the or button
to select Reset.
Press the OK button.
Base color adjustment
Red
Green
Blue
Yellow
Magenta
Cyan
Reset
MENU
Back Watch TV
EXIT
Hue
Saturation
0
0
0
0
0
0
0
0
0
0
0
0
OK
23
Equipment
connections
Reference section
#01E18-28_32/37WL58AET 8/5/05, 3:50 PM23
Black
Toshiba 32/37WL58AET (E)
Page 24
Basic operation
Basic operation
Sound adjustment
MTS (Multi-channel TV Sound) setting
Setting the MTS mode:
Auto mode
The MTS auto mode automatically recognize stereo/bilingual
programs depending on the broadcast signal.
CALL
MENU
DVD
MENU
21 3
54 6
87 9
0
P
OK
EXIT
Press the MENU button, then
press the or button to
display the SOUND menu.
Press the or button to
select MTS, then press the or
button to select Auto or
Mono.
Mono mode
If you experience noise or poor reception of any stereo/bilingual
program, set the MTS mode to Mono.
Noise will be reduced and reception may improve.
Note:
If you experience noise with a particular program on whose channel
reception is usually good, try setting MTS mode to Auto, then
switch the button to Mono (monaural) (see page 25).
MTS
Dual
Headphone
Headphone level
Bass
Treble
MENU
Back Watch TV
SOUND 1/ 2
EXIT
Auto
Dual 1
Mode1
0
0
TV
VCR
DVD
Selecting the dual 1 or dual 2 mode
P
You can hear only dual 1 or dual 2 sound selected, whenever
bilingual programs are received.
Press the MENU button, then press the or button to
display the SOUND menu.
Press the
select Dual, then press the
to select Dual 1 or Dual 2.
Notes:
• When the MTS setting is in Mono mode, the Dual menu is not
selectable.
• The Dual menu setting status remains even if the TV is turned off.
or
button to
or
MTS
Dual
Headphone
Headphone level
Bass
Treble
MENU
Back Watch TV
SOUND 1/ 2
EXIT
Auto
Dual 1
Mode1
0
0
24
#01E18-28_32/37WL58AET 8/5/05, 3:50 PM24
Black
Toshiba 32/37WL58AET (E)
Page 25
Stereo/Bilingual selection
CALL
21 3
54 6
87 9
0
MENU
DVD
MENU
TV
VCR
DVD
P
OK
P
EXIT
To select the stereo programs:
When a stereo program is
received, Stereo appears.
Press the button to select
the stereo/monaural mode.
Stereo and Mono appear
cyclically on the screen.
ABCD10
Stereo
To select the bilingual programs:
When a bilingual program is
received, Dual appears.
Press the button to select
the sound to be heard. The
sound differs according to the
transmission system: NICAM
or German stereo/bilingual broadcast. Dual 1, Dual 2
and Mono appear cyclically on the screen.
Sound to be heard
Display
NICAM
Dual 1 Sub I sound Main sound
Dual 2 Sub II sound Sub sound
Mono Main sound —
Note:
These settings are not stored in the TV memory.
ABCD10
Dual 1
German stereo/
bilingual broadcast
Sound quality adjustment
Stereo
Dual
Introduction
Getting started
Basic operation
Features
Equipment
connections
#01E18-28_32/37WL58AET 8/5/05, 3:51 PM25
Black
To adjust the sound quality:
Press the MENU button, then
press the or button to
display the SOUND menu.
Press the or button to
select Bass, Treble or Balance.
Press the or button to
adjust the level.
Selection Pressing
Bass weaker stronger
Tr eble weaker stronger
Balance decreases the decreases the
MTS
Dual
Headphone
Headphone level
Bass
Treble
MENU
Bass 0
SOUND 1/ 2
EXIT
Back Watch TV
Auto
Dual 1
Mode1
0
0
right channel left channel
25
Toshiba 32/37WL58AET (E)
Reference section
Page 26
Basic operation
Basic operation
Sound adjustment
To select the audio output
With the audio output function “Variable”, you can use the TV’s
remote controller to adjust the sound volume of the external audio
system connected (see page 48).
CALL
MENU
DVD
MENU
21 3
54 6
87 9
0
P
EXIT
To select the sound volume from AUDIO OUT terminals:
(continued)
Press the MENU button, then press the or button to
display the SET UP menu.
Press the or button to
select AV connection, then
press the OK button to display
the AV connection menu.
Press the or button to
select Audio output, then press
the or button to select
Variable or Fixed.
Language
Auto tuning
Manual tuning
Program sorting
AV connection
Picture position
MENU
HDMI1 Audio
HDMI2 Audio
Woofer
Audio output
SET UP
EXIT
Back Watch TV
AV connection
English
Auto
Auto
Internal
Variable
OK
OK
OK
OK
OK
TV
VCR
DVD
OK
P
MENU
EXIT
Back Watch TV
Note:
Make sure the volume control of your audio amplifier is set to a
moderate listening level.
To select the HDMI audio mode
You can select sound of the HDMI and DVI device audio connected
terminals (see page 52) from three modes : Auto, Digital and
Analogue.
Press the MENU button,then press the or button to
display the SET UP menu.
Press the or button to
select AV connection, then
press the OK button to display
the AV connection menu.
Press the or button to
select HDMI 1 Audio or HDMI
2 Audio, then press the or
button to select Auto, Digital or
Analogue.
Language
Auto tuning
Manual tuning
Program sorting
AV connection
Picture position
MENU
HDMI1 Audio
HDMI2 Audio
Woofer
Audio output
SET UP
EXIT
Back Watch TV
AV connection
English
OK
OK
OK
OK
OK
Auto
Auto
Internal
Fixed
26
#01E18-28_32/37WL58AET 8/5/05, 3:51 PM26
Black
MENU
EXIT
Back Watch TV
Toshiba 32/37WL58AET (E)
Page 27
To use the WOW surround sound
CALL
21 3
54 6
87 9
0
WOW is a special combination of SRS Labs audio technologies that
creates a thrilling surround experience with deep, rich bass from
stereo sound sources. Your TV’s audio will sound fuller, richer and
wider.
Press the MENU button, then
press the or button to
display the SOUND menu.
Press the or button to
Balance
WOW
Stable sound
Speaker
SOUND 2/ 2
0
OK
Off
On
select WOW on the 2nd page,
then press the OK button.
Press the or button to select
an item you want to adjust, then
press the or button to
MENU
Back Watch TV
SRS 3D
FOCUS
TruBass
EXIT
WOW
Off
On
High
adjust the settings as required.
Introduction
Getting started
Basic operation
MENU
DVD
MENU
P
EXIT
OK
P
TV
VCR
DVD
Notes:
• If the broadcast is monaural, the SRS 3D
effect does not work.
• WOW, SRS and
®
symbol are
trademarks of SRS Labs, Inc.
• WOW technology is incorporated under
license from SRS Labs, Inc.
MENU
•
SRS 3D: To turn On or Off the surround effect.
•
FOCUS: To turn On or Off the surround effect.
•
TruBass: To select your desired bass expansion level (Off, Low or
EXIT
Back Watch TV
High).
To use the stable sound
When the signal source is changed, the Stable sound function limits
the high volume level to prevent extreme changes in volume. For
example, this will prevent the sudden increase in volume that often
happens when a TV program switches to a commercial.
From the SOUND menu, press
the or button to select
Stable sound on the 2nd page.
Balance
WOW
Stable sound
Speaker
SOUND 2/ 2
0
OK
Off
On
Press the or button to
select On or Off.
MENU
EXIT
Back Watch TV
To activate/deactivate the speaker
Use this function to turn the TV speakers off when you connect an
audio system (see page 48).
From the SOUND menu, press
the or button to select
Speaker on the 2nd page.
Press the or button to
select On or Off.
Balance
WOW
Stable sound
Speaker
MENU
SOUND 2/ 2
EXIT
Back Watch TV
0
OK
Off
On
Features
Equipment
connections
Reference section
#01E18-28_32/37WL58AET 8/5/05, 3:51 PM27
Black
27
Toshiba 32/37WL58AET (E)
Page 28
Basic operation
Basic operation
Sound adjustment
(continued)
Woofer internal/external mode, Bass boost, Woofer system
To select the woofer internal/external mode:
Press the MENU button, then press the or button to
display the SET UP menu.
CALL
21 3
54 6
87 9
0
Press the or button to
select AV connection, then
press the OK button to display
the AV connection menu.
Press the or button to
select Woofer, then press the
or button to select Internal
or External.
• Internal is to use the bass boost.
• External is to use an external woofer system.
HDMI1 Audio
HDMI2 Audio
Woofer
Audio output
MENU
Back Watch TV
AV connection
EXIT
Auto
Auto
External
Fixed
MENU
DVD
MENU
TV
VCR
DVD
P
OK
P
EXIT
To use the bass boost:
Select the woofer internal mode as shown above.
Press the button to display
Bass boost level.
While the Bass boost display is
on the screen, press the or
button to adjust the Bass boost
level.
To turn off the Bass boost, press
the button to display Bass
boost Off.
To use an external woofer system:
Connect an external woofer to
the “WOOFER OUT” output
terminal located on the rear of
the TV (see page 48).
Select woofer external mode
from the AV connection menu.
Bass boost 70
Bass boost Off
Woofer system
with amplifier
Note:
The Bass Boost effect is active only when
the sound outputs from the speaker or an
external woofer system.
28
#01E18-28_32/37WL58AET 8/5/05, 3:51 PM28
Black
Press the button to display
External Woofer level, then
press the or button to
adjust the External Woofer
level.
To turn off the External Woofer,
press the button to display
External Woofer Off.
External Woofer 70
External Woofer Off
Toshiba 32/37WL58AET (E)
Page 29
Features
Input selection
Input selection
To select input source:
TV top view
CALL
21 3
54 6
87 9
0
MENU
DVD
MENU
P
OK
P
Note:
When the component video input, HDMI
1, HDMI 2, PC or BM input mode is
selected, the MONITOR OUT output
terminals (see page 48) output audio
signal only.
EXIT
Press and hold the button or
press the OK button on the
remote control until the video
input mode list appears on the
screen, then press the
button to select appropriate
input source (or press the
button on the TV top panel or
the
control repeatedly to select
required input source directly).
Press the OK button.
HDMI 1 ( HDMI 1 input),
HDMI 2 ( HDMI 2 input),
PC ( RGB/PC, PC input),
BM (BRIDGE MEDIA Input)
Manual setting:
Press the MENU button, then
press the or button to
display the SET UP menu.
Press the or button to
select Manual setting, then
press the OK button.
Press the or button to
select an item, then press the
or button to select the item
as shown below.
A. Color System
B. Video label
:
or
OK:
5
4
3
2
1
0
BM
PC
HDMI2
(Press and hold)
C2
C1
2
1
1
BM
PC
HDMI2
HDMI1
button on the remote
Ex. PC VGA mode
1 ( (1), video 1 input),
PC VGA
2 ( (2), video 2 input),
C1 ( (C1), COMPONENT VIDEO INPUT),
C2 ( (C2), COMPONENT VIDEO INPUT),
Language
Manual setting
AV connection
Picture position
MENU
OK
MENU
EXIT
Back Watch TV
Manual setting
Color system:Auto
EXT1
Store
Back Watch TV
SET UP
A
EXIT
English
OK
OK
OK
AB
Confirm that color system is set to “A” (Auto). If not,
select “A” with the or button.
The video label allows you to label each input source for
your TV.
To change or create video labels:
1) Press the or button repeatedly to select a
character for the first space, then press the button.
*(blank space)
2) Repeat step 1) to enter the rest of the characters.
If you would like a blank space in the label name, you
must choose a blank space from the list of characters.
Press the OK button to store your settings.
29
Introduction
Getting started
Basic operation
Features
Equipment
connections
Reference section
#01E29-31_32/37WL58AET 8/5/05, 3:52 PM29
Black
Toshiba 32/37WL58AET (E)
Page 30
Features
Timer, Gray screen
Timer
The Timer is especially useful if you
want the TV to turn itself on or off after a
selected period of time.
Activation of the Timer is indicated by
the green “On-timer indicator”, on the
front of the TV (see page 9).
TV top view
CALL
21 3
Features
54 6
87 9
0
MENU
DVD
MENU
P
OK
EXIT
To select the timer menu:
Press the MENU button, then
press the or button to
display the TIMER menu.
Press the or button to
Sleep timer
On timer
On timer Position
TIMER
00:00
00:30
03
select the required timer mode
(Sleep timer (Turn off the TV)
MENU
Back Watch TV
EXIT
or On timer).
Press the Number buttons (0-9), or button to set the On
or Off delay time, e.g. on in 30 minutes and On timer
Position 3 selected.
Press the EXIT button to exit the menu. When setting the On
timer, press the or button to select the On timer Position
and enter the program position number you want to watch.
Set the Standby mode by pressing the button on the
remote control or Power button on the TV.
Note:
The time display will set by 10 minutes, up to 12 hours 50 minutes.
To activate gray screen
With the gray screen function On, the screen will automatically turn
gray and the sound will be muted when no signal is being received.
Press the MENU button, then
press the or button to
display the FUNCTION menu.
Press the or button to
select Gray screen.
Teletext
Teletext SW
Auto format
Gray screen
Side panel
MENU
Press the or button to select On or Off.
FUNCTION
EXIT
Back Watch TV
FAST
On
On
1
1
P
TV
VCR
DVD
30
#01E29-31_32/37WL58AET 8/5/05, 3:52 PM30
Black
Note:
In the PC input mode (see page 29), the Gray screen is not available.
Toshiba 32/37WL58AET (E)
Page 31
Features
Side panel adjustment
Side panel adjustment
You can adjust the brightness of side panel in 14:9 or 4:3 mode.
To adjust the side panel setting:
Press the MENU button, then
CALL
21 3
54 6
press the or button to
display the FUNCTION menu.
Press the or button to
select Side panel.
Teletext
Teletext SW
Auto format
Gray screen
Side panel
MENU
Back Watch TV
FUNCTION
EXIT
FAST
1
On
On
1
Introduction
Getting started
MENU
DVD
MENU
TV
VCR
DVD
87 9
0
P
OK
P
EXIT
Press the or button to
Side panel
1
adjust the settings as required.
To use the auto format
When the TV receives a true HDMI signal picture and the auto
format is On, it will automatically be displayed in HDMI signal
format, irrespective of the TV's previous setting.
This function is only avaiable for PAL and PAL-DVD (HDMI signal
format) input signals.
From the FUNCTION menu,
press the or button to
select Auto format.
Press the or button to
select On or Off.
Teletext
Teletext SW
Auto format
Gray screen
Side panel
MENU
FUNCTION
EXIT
Back Watch TV
LIST
On
On
1
1
Basic operation
Features
Equipment
connections
#01E29-31_32/37WL58AET 8/5/05, 3:52 PM31
Black
Reference section
31
Toshiba 32/37WL58AET (E)
Page 32
Features
Teletext – Setting up
• This TV has a multi-page teletext memory, which takes a few moments to load and it offers two ways of viewing
Teletext FAST and LIST which are explained on page 34.
Teletext mode
To select teletext mode:
Select a channel position with the desired teletext service.
Press the MENU button, then
CALL
21 3
54 6
press the or button to
select Teletext.
Teletext
Teletext SW
Auto format
Gray screen
Side panel
MENU
FUNCTION
EXIT
Back Watch TV
LIST
On
On
1
1
Features
MENU
DVD
MENU
TV
VCR
DVD
87 9
0
P
OK
P
Press the or button to select Teletext.
Press the or button to select FAST or LIST mode.
EXIT
Note:
When you are watching the teletext
program, SET UP menu and FUNCTION
menu are not selectable.
32
#01E32-35_32/37WL58AET 8/5/05, 3:53 PM32
Black
Toshiba 32/37WL58AET (E)
Page 33
Features
About Teletext
Teletext general information
CALL
21 3
54 6
87 9
0
MENU
DVD
MENU
P
OK
EXIT
button:
Pressing the button once will bring up the teletext screen.
Press again to superimpose the teletext over a normal broadcast
picture. Press again to return to normal TV mode. You need to
return to normal viewing if you wish to change channels.
When you first press the button to access the text service, the
first page you see will be the initial page.
In FAST mode, this displays the main subjects available and their
relevant page numbers.
In LIST mode, you will see the page numbers currently stored on
the each color button.
Sub-pages:
Once in this chosen page, if there are sub-pages they will
automatically load into memory without changing the one you are
reading. If there are many sub-pages, it will take a long time for
them all to load and this will depend on the speed with which the
broadcaster transmits them.
To access the sub-pages in memory, press the ( ) button,
then use the and buttons to view them.
Introduction
Getting started
Basic operation
Features
P
TV
VCR
DVD
Note:
If you press the button while the
picture mode is activated, this mode will
be cancelled.
Teletext SW adjustment
If reception is weak, the picture may appear blurred, and text may
not appear clearly on the screen. In this case, use this function to
make text appear clearer.
Press the MENU button, then
press the or button to
display the FUNCTION menu.
Teletext
Teletext SW
Auto format
Gray screen
Side panel
MENU
Press the or button to select Teletext SW, then press the
or button to adjust 1, 2 or 3 modes.
Notes:
• This function may not be available in some cases.
• Only in the antenna input signal mode, this function is available.
FUNCTION
EXIT
Back Watch TV
LIST
On
On
3
1
Equipment
connections
Reference section
#01E32-35_32/37WL58AET 8/5/05, 3:53 PM33
Black
33
Toshiba 32/37WL58AET (E)
Page 34
Features
Teletext – FAST and LIST modes
Using FAST mode
There are two Modes: FAST will display
FASTEXT, if available. LIST will display your
four favorite pages. In either mode, as an
alternative to the colored buttons, you can
access a page by entering a 3-digit number,
using the Number buttons on the remote
control, or to advance to the next page, press
the P ( ) button, to go back to the previous
page press the P ( ) button.
To change between FAST and LIST, see page 32.
CALL
21 3
54 6
Features
87 9
0
MENU
DVD
MENU
P
EXIT
Press the button to access
100 Sport 14:57:55
teletext.
If FASTEXT is available, you will
see 4 colored titles at the base of
the TV screen. To access any given
subject, simply press the relevant
SwimmingRacingBaseballF ootball
colored button on the remote
control.
If FASTEXT is not available, you
can access any page simply by entering
Red
Green
Yellow
Blue
a 3-digit page number or pressing the
corresponding colored button.
For further information on your particular text system(s), see the
broadcast teletext index page or consult your local Toshiba dealer.
Using LIST mode
Press the button to access
teletext.
The four choices at the bottom
of the screen are now number –
100, 200, 300 and 400, which
have been programmed into
the TV’s memory.
To view these pages, use the
colored prompt buttons.
e.g. press the Green button to
view page 200.
100 TEXT M00 14:58:55
100 200 300 400
Blue
Red
Green
Yellow
OK
R
P
GY
TV
VCR
DVD
34
#01E32-35_32/37WL58AET 8/5/05, 3:53 PM34
Black
If you want to change these
100 TEXT M00 14:58:59
stored pages, press the colored
button for the color you want
to change.
B
e.g. Press the Green button and
enter the 3-digit number.
100 250 300 400
This number will change in the
top left of the screen and in the
colored highlight.
Press the OK button to store your choice. The bars at the
bottom of the screen will flash white.
You may view other pages by simply entering the 3-digit
page number – but NEVER press the OK button or you will
lose the favorite already stored.
Toshiba 32/37WL58AET (E)
Page 35
Features
Teletext – Control buttons
• Below is an introduction to the teletext buttons on your remote control and their functions.
Teletext buttons on the remote control
Introduction
Note:
It will not be possible to change
program position while in Teletext
mode, you will have to cancel the
teletext first by pressing the
button to return to a normal TV picture.
CALL
21 3
54 6
87 9
0
MENU
DVD
MENU
P
OK
P
EXIT
To display a page of teletext:
Press the button to display teletext. Press again to
superimpose the teletext over a normal broadcast picture. Press
again to return to normal TV mode.
To display an index/initial page:
In FAST-mode
Press the button to access the index page. The one
displayed is dependant on the broadcaster.
In LIST-mode
Press the button to return to the 100 page or initial page.
To reveal concealed text:
Some pages cover topics such as quizzes and jokes. To discover the
solutions, press the button.
To hold a wanted page:
This function is included as it is part of the broadcast teletext system
but you will not need it as this TV allows you to control the display
of sub-pages.
To enlarge the teletext display size:
Press the button once to enlarge the top half of the page, press
again to enlarge the bottom half of the page. Press again to revert to
the normal size.
To select a page while viewing a normal picture:
When in teletext mode, if a page selection is made and then the
button is pressed, a normal picture will be displayed. The TV
will indicate when the page is present by displaying the title bar of
the text page at the top of the screen. Press the button to view
the page.
Getting started
Basic operation
Features
Equipment
connections
TV
VCR
DVD
#01E32-35_32/37WL58AET 8/5/05, 3:54 PM35
Black
To select the time display:
If you press the button while
watching a normal TV broadcast, you
will see a time display from the
broadcaster. It will remain on the
screen for about 5 seconds.
Note:
If you press the button while this mode is activated, this mode
will be cancelled.
9:56 and 25 seconds p.m.
21:56:25
35
Toshiba 32/37WL58AET (E)
Reference section
Page 36
Features
BRIDGE MEDIA using
• The “BRIDGE MEDIA” function can be used to play back still or motion picture/sound memorized on “SD”
Memory Cards, “Memory Stick” cards or “SmartMedia” cards by a digital still camera.
• The picture may not be reproduced properly depending on memory conditions.
If the picture cannot be displayed on the screen, you will see an “X” mark on the screen.
The edge of the picture may be hidden depending on the aspect ratio of the selected.
• If a full screen picture is displayed for more than 30 minutes, the screen saver will be activated (factory set).
(The motion picture appears on the screen.) (see page 43)
To use the BRIDGE MEDIA
Slot for SD or Memory Stick
SD Memory
Card
Memory Stick
card
SmartMedia
card
Memory card format
Features
Memory Stick
TV left side view
Slot for SmartMedia
OR
Item Format
SD Memory Card
Memory Stick
Memory Stick (magic gate/high speed data transmission)
Memory Stick (magic gate)
Memory Stick PRO
Memory Stick (with memory select)
SmartMedia
To remove the memory card
• Push the SD Memory Card or Memory Stick
card.
• Pull out the SmartMedia card.
Notes:
• While the picture from the memory card is on the
screen, never turn off the TV.
• While the picture from the memory card is on the
screen, never take out the memory card.
8/16/32/64/128/256/512 MB
16/32/64/128 MB
16/32/64/128 MB
32/64/128 MB
256/512 MB and 1GB
128 MB × 2
8/16/32/64/128 MB
• About Memory Stick: Magic Gate and high speed data transmission are not available on this TV.
Still picture format
Item Format
Memory Format
File Format
Compatibility
Extension
Number of Picture
Elements
Number of files
Applicable
maximum capacity
• is a trademark of Toshiba Corporation.
• is a trademark of SD Card Association.
• is a trademark of Sony Corporation.
JPEG
Exif ver 2.2
DCF ver 1.0
JPG
H: 160 × 4096
V: 120 × 4096
65535
1GB
Motion picture format
Item Format
Memory Format
File Format
Extension
Number of Picture
Elements and
Frames Rate
Audio Format
Audio Sampling Frequency
Motion
JPEG
MPEG-1
Motion JPEG/MPEG-1
AVI/MOV (QuickTime)/MPEG-1
avi/mov/mpg
VGA 640 × 480 (0 < × 10 fps)
QVGA 320 × 240
QQVGA 160 × 120
CIF 352 × 288 (0 < × 8 fps)
PCM/MPEG-1 Audio
5 - 48 kHz
36
(0 < ×
(0 < ×
15 fps)
20 fps)
#01E36-43_32/37WL58AET 8/5/05, 3:54 PM36
Black
Toshiba 32/37WL58AET (E)
Page 37
• Pictures on the memory card newly inserted will appear on the screen.
• If you use this function for a purpose other than your private viewing or listening, it may infringe copyright laws.
•You can also select BRIDGE MEDIA by pressing the
button (see page 29).
• In the BRIDGE MEDIA mode, the Auto tuning, Manual tuning and Program sorting disappear automatically in
the SET UP menu.
To use the BRIDGE MEDIA (still picture)
To select the full screen picture:
Insert the SD Memory Card or Memory Stick card into the slot.
Insert the SmartMedia card into the slot.
MEMORY CARD
2004-07-01 00:00:00 am
AUT_0242.JPG
1280x960
EXIT
1 / 3
1
/29
CALL
21 3
54 6
The index menu appears on the
screen, then press the , ,
or button to select the screen
pictures.
If the memory card contains
still pictures, the mark
appears on the screen.
Introduction
Getting started
MENU
DVD
MENU
TV
VCR
DVD
87 9
0
P
OK
P
GY
EXIT
BR
•To change to the MEMORY CARD menu, press the EXIT
button.
•To change to the motion picture, press the B button. If there
is no motion picture, you cannot change the mode.
Press the OK button.
Press the or button to
select another full screen
picture you want to see on the
screen.
2004-07-01 00:00:00 am
AUT_0242.JPG
To use the slide show:
From the full screen picture,
press the R button.
Press the Y button to display
the Slideshow set up.
Press the , , or button
to select 5 sec., 10 sec., 15 sec.,
20 sec., 30 sec., or 60 sec.
Press the OK button, the
Slide show will start.
Slideshow set up
5 sec. 10 sec. 15 sec.
20 sec. 30 sec. 60 sec.
EXIT
2004-07-01 00:00:00 am
AUT_0242.JPG
1280x960
1280x960
EXIT
EXIT
Basic operation
5
/29
5
/29
Features
Equipment
connections
Notes:
•To exit the BRIDGE MEDIA, press the
button.
•To return to the previous menu, press
the EXIT button.
#01E36-43_32/37WL58AET 8/5/05, 3:55 PM37
Black
To stop the slide show
Press the R or G button.
2004-07-01 00:00:00 am
AUT_0242.JPG
1280x960
EXIT
5
/29
Notes:
• If you select “Slide” mode in the index menu, the Slideshow set
up times may differ from the times you set in step 2.
• The MEMORY CARD menu variation.
Ex. SD and SmartMedia
MEMORY CARD
SD Memory CardSmartMedia
MEMORY STICK
10 10
TV
Ex. SmartMedia and
Memory Stick
MEMORY CARD
SD Memory CardSD Memory CardSmartMedia
MEMORY STICK
10 10
TV
37
Toshiba 32/37WL58AET (E)
Reference section
Page 38
Features
BRIDGE MEDIA using
(continued)
To use the BRIDGE MEDIA (still picture) (continued)
To use the zoom mode:
From the full screen picture, press the Y button to display the picture
with a frame. Each time you press the Y button, the picture zooms as
follows:
CALL
21 3
2004-07-01 00:00:00 am
AUT_0242.JPG
54 6
87 9
1280x960
11
/29
2004-07-01 00:00:00 am
AUT_0242.JPG
× 4 × 2
x
4
1280x960
EXITEXIT
11
/29
x
2
Features
MENU
DVD
MENU
TV
VCR
DVD
0
P
OK
P
2004-07-01 00:00:00 am
AUT_0242.JPG
1280x960
11
/29
2004-07-01 00:00:00 am
AUT_0242.JPG
1280x960
EXITEXIT
11
/29
EXIT
To select the picture position:
When in the × 2 zoom mode or × 4 zoom mode, you can select the
picture position.
Press the , , or button to select the picture position.
Ex. × 2 zoom mode
x2
Y
2004-07-01 00:00:00 am
AUT_0242.JPG
11/29
1280x960
EXIT EXIT
2004-07-01 00:00:00 am
AUT_0242.JPG
2004-07-01 00:00:00 am
AUT_0242.JPG
2004-07-01 00:00:00 am
AUT_0242.JPG
1280x960
1280x960
1280x960
11/29
EXIT
1280x960
x2
11/29
x2x2
11/29
EXIT
x2
11/29
EXIT
2004-07-01 00:00:00 am
AUT_0242.JPG
38
#01E36-43_32/37WL58AET 8/5/05, 3:55 PM38
Black
Toshiba 32/37WL58AET (E)
Page 39
To use the BRIDGE MEDIA (still picture) (continued)
To select the information format:
Each time you press the B button, the on-screen information will
change as follows:
CALL
Introduction
Getting started
MENU
DVD
MENU
TV
VCR
DVD
21 3
54 6
87 9
0
P
OK
P
G
EXIT
B
2004-07-01 00:00:00 am
AUT_0242.JPG
1280x960
5
/29
EXIT
EXIT
To select the rotation picture format:
Each time you press the G button, the picture rotates clockwise
by 90°:
Basic operation
Features
Equipment
connections
#01E36-43_32/37WL58AET 8/5/05, 3:55 PM39
Black
Note:
This function also operates in the index menu.
Reference section
39
Toshiba 32/37WL58AET (E)
Page 40
Features
BRIDGE MEDIA using
To use the BRIDGE MEDIA (motion picture)
To select the full screen motion picture and audio:
Insert the SD Memory Card or Memory Stick card into the slot.
Insert the SmartMedia card into the slot.
The index menu appears on the
CALL
21 3
54 6
87 9
0
screen, then press the , ,
or button to select the screen
pictures.
If the memory card contains
motion picture and audio, the
mark appears on the screen.
•To change to the MEMORY CARD menu, press the EXIT
button.
•To change to the still picture, press the B button. If there is
no still picture, you cannot change the mode.
(continued)
MEMORY CARD
2004-07-01 00:00:00 am
VCLP0006.MOV
640x480
EXIT
1 / 1
1
/1
Features
MENU
DVD
MENU
TV
VCR
DVD
P
OK
P
GY
EXIT
BR
Press the OK button, the full
00:04:30
screen motion picture with
frame and audio starts.
Press the or button to
select another full screen
motion picture you want to see
2004-07-01 00:00:00 am
VCLP0006.MOV
640x480
EXIT
1
/1
on the screen.
Notes:
• Adjust the sound volume with the ; + or ; – button.
• The motion picture play back mark ( ) is displayed for several
seconds.
To return to the index menu
Press the EXIT button.
To freeze the picture and audio:
Each time you press the OK button to freeze, the on-screen picture
and audio will change as follows:
(Moving) (Still)
40
#01E36-43_32/37WL58AET 8/5/05, 3:55 PM40
Black
Toshiba 32/37WL58AET (E)
Page 41
To use the BRIDGE MEDIA (motion picture) (continued)
To use the fast forward:
Each time you press the G button, the on-screen picture will change
as follows:
CALL
00:01:00
Introduction
Getting started
MENU
DVD
MENU
TV
VCR
DVD
21 3
54 6
87 9
0
P
OK
P
G
EXIT
B
2004-07-01 00:00:00 am
VCLP0006.MOV
00:03:00
2004-07-01 00:00:00 am
VCLP0006.MOV
00:06:00
2004-07-01 00:00:00 am
VCLP0006.MOV
00:10:00
2004-07-01 00:00:00 am
VCLP0006.MOV
640x480
640x480
640x480
640x480
1/1
EXIT
1/1
EXIT
1/1
EXIT
1/1
EXIT
To select the information format:
Each time you press the B button, the on-screen information will
change as follows:
Basic operation
Features
Equipment
connections
#01E36-43_32/37WL58AET 8/5/05, 3:56 PM41
Black
00:04:30
2004-07-01 00:00:00 am
VCLP0006.MOV
1
/1
640x480
EXIT
Toshiba 32/37WL58AET (E)
Reference section
EXIT
41
Page 42
Features
BRIDGE MEDIA using
(continued)
To use the BRIDGE MEDIA (motion picture) (continued)
To use the rewind:
Each time you press the R button, the on-screen picture will change
as follows:
CALL
21 3
54 6
87 9
0
00:10:00
2004-07-01 00:00:00 am
VCLP0006.MOV
00:06:00
2004-07-01 00:00:00 am
VCLP0006.MOV
640x480
640x480
1
/1
EXIT
1
/1
EXIT
Features
MENU
DVD
MENU
R
TV
VCR
DVD
P
OK
P
EXIT
00:03:00
2004-07-01 00:00:00 am
VCLP0006.MOV
00:01:00
640x480
1
/1
EXIT
Y
2004-07-01 00:00:00 am
VCLP0006.MOV
To turn off the frame:
Each time you press the Y button, the on-screen frame will change
as follows:
Ex. Normal
00:04:30
2004-07-01 00:00:00 am
VCLP0006.MOV
1
/1
640x480
EXIT EXIT
640x480
1
/1
EXIT
00:04:30
2004-07-01 00:00:00 am
VCLP0006.MOV
640x480
1
/1
42
#01E36-43_32/37WL58AET 8/5/05, 3:56 PM42
Black
Ex. No information
Toshiba 32/37WL58AET (E)
Page 43
To use the BRIDGE MEDIA (information)
To select the screen saver:
The screen saver function activates by default. A moving picture
will appear on the screen.
CALL
21 3
54 6
From the index menu (still or
motion picture), then press the
Y button to display the
ScreenSaver.
ScreenSaver
10 min. 20 min. 30 min.
OFF
EXIT
2004-07-01 00:00:00 am
AUT_0242.JPG
1280x960
EXIT
Introduction
Getting started
1
/29
MENU
DVD
MENU
TV
VCR
DVD
87 9
0
P
OK
P
Y
EXIT
Press the or button to select 10 min., 20 min., 30 min., or
OFF.
(30 min: factory set)
Press the OK button to return.
The screen will return to the index menu.
Note:
In the slide show or motion picture, the screen saver does not
operate.
Alerts:
• NO IMAGE
No data to play back
• NO SD Memory Card
No insert card
• NO SmartMedia
No insert card
• NO MEMORY STICK
No insert card
• NO FILE
No recorded
• MEMORY STICK TYPE ERROR
No accept Memory Stick
• FILE ERROR
File broken or irregular file
• FILE ERROR
Not accept BM format
• FILE TYPE ERROR
No accept file format
• SD Memory Card ERROR
BM broken or inverse
• SmartMedia ERROR
BM broken or inverse
• MEMORY STICK ERROR
BM broken or inverse
Basic operation
Features
Equipment
connections
#01E36-43_32/37WL58AET 8/5/05, 3:56 PM43
Black
To use the memory card:
Note that the operation is not guaranteed for all these memory cards
shown in the table.
Toshiba recommend that you back up the data on the memory card before
use. (The data of the memory card may be lost by misuse or malfunction
of the TV. Toshiba assume no liability for losses incurred by data lost
through the use of this TV.)
43
Toshiba 32/37WL58AET (E)
Reference section
Page 44
Features
Double-Window using
• The Double-Window function allows you to split the screen into a Main and Sub window and watch two
programs at the same time. You can display the TV program or the video input on the Main and Sub window.
• When you watch one channel simultaneously in the Double-Window mode, differences in image quality between
the Main picture and Sub-picture occurs.
To display the double-window
Select the TV program you want to watch.
Press the button to display the double-window.
87 9
Stereo
Main Picture Sub-Picture
2 EFGH
AB
Sub-window
source
0
MENU EXIT
DVD
MENU
P
OK
Main
4 ABCD
window
source
Press the n or button to select a program position
or video input source, or switch and adjust speaker sound for
each window (A, B).
Features
P
TV
VTR
DVD
Notes:
• Only 480i and 576i signals are available
for the sub-window sources.
If the other signal is received, the
message “ Signal not supported”will
be displayed on the screen.
• When you select the TV program of the
Sub-window, the sound is monaural
only.
• In the PC or BM input mode (see page
29), this mode is not available.
• The still mode will be cancelled if it
receives a different input signal when
changing program position, or video
mode is selected, etc.
Press n
4
Stereo
ABCD 2 EFGH
A B
Press n
4 ABCD
Stereo
A B
Press n
4 ABCD
Stereo
A B
Press n
4
Stereo
ABCD 2 EFGH
A B
2 EFGH
2 EFGH
P 89, a: available for A
Speaker sound: A
; – +: available for A
: A
P 89, a: available for B
Speaker sound: A
; – +: available for A
: B
P 89, a: available for B
Speaker sound: B
; – +: available for B
: B
P 89, a: available for A
Speaker sound: B
; – +: available for B
: A
44
#01E44-46_32/37WL58AET 8/5/05, 3:57 PM44
Black
Toshiba 32/37WL58AET (E)
Page 45
To select the headphone mode
CALL
21 3
54 6
You can select either Mode 1 or Mode 2.
Mode 1: Linked with the selected window
Mode 2: Linked with another window
Press the MENU button, then
press the or button to
display the SOUND menu.
MTS
Dual
Headphone
Headphone level
Bass
Treble
MENU
Back Watch TV
SOUND 1/ 2
EXIT
Auto
Dual 1
Mode1
0
0
Introduction
Getting started
87 9
0
MENU EXIT
DVD
MENU
TV
VTR
DVD
P
OK
P
Press the or button to
select Headphone, then press
the or button to select
Mode 1 or Mode 2.
MTS
Dual
Headphone
Headphone level
Bass
Treble
MENU
SOUND 1/ 2
EXIT
Back Watch TV
To adjust the headphone volume (Mode 2)
From the SOUND menu, press
the or button to select
Headphone.
Press the or button to
select Mode 2.
Press the or button to
select Headphone level.
MTS
Dual
Headphone
Headphone level
Bass
Treble
MENU
MTS
Dual
Headphone
Headphone level
Bass
Treble
MENU
SOUND 1/ 2
EXIT
Back Watch TV
SOUND 1/ 2
EXIT
Back Watch TV
Auto
Dual 1
Mode1
0
0
Auto
Dual 1
Mode2
30
0
0
Auto
Dual 1
Mode2
30
0
0
Basic operation
Features
Equipment
connections
#01E44-46_32/37WL58AET 8/5/05, 3:57 PM45
Black
Press the or button to
adjust the Headphone volume.
Headphone level 30
Reference section
45
Toshiba 32/37WL58AET (E)
Page 46
Features
Double-Window using
(continued)
To use a headphone
Connect a headphone to the headphone jack on the right side of the
TV.
TV right side view
CALL
21 3
54 6
87 9
0
Features
MENU EXIT
DVD
MENU
TV
VTR
DVD
P
OK
P
Headphone jack
When in a single window:
Headphone
mode
Mode 1
Mode 2
When in Double-Window:
Headphone
mode
Mode 1
Mode 2
Sound comes out
(; – + is available.)
Sound comes out
(Headphone level menu is
available.)
A (or B)
(; – + is available.)
B (or A)
(Headphone level menu is
available.)
Headphone
Headphone sound is the same as speaker sound.
Headphone
Speakers
No sound
Sound comes out
(; – + is available.)
Speakers
No sound
A (B)
(; – + is available.)
A: Main window B: Sub-window
46
#01E44-46_32/37WL58AET 8/5/05, 3:57 PM46
Black
Toshiba 32/37WL58AET (E)
Page 47
Equipment connections
Side connections
•You can connect a wide variety of auxiliary equipment via the terminals located on the right side of the panel (2).
Connection example
Please always refer to the owner’s manual of the equipment to be connected for full details.
TV back view
Introduction
Getting started
TV right side view
Basic operation
Features
Equipment
connections
•To select the side inputs, press and hold the button until the video input mode list appears on the screen, then
press the or button to select 2 (see page 29), then press OK.
• Before connecting any external equipment, turn off all main power switches.
• Connect either the S-VIDEO input terminal or VIDEO input terminal, whichever terminal is used.
Never connect to both of these terminals.
• If you connect mono sound equipment to (2), connect the audio output of the equipment to the L/MONO jack
on the TV.
•You can enjoy Video Games with this TV. However shooting games, which shoots at a target on the TV screen with
a light gun, may not work because of the LCD Color TV properties.
#01E47-52_32/37WL58AET 8/5/05, 3:58 PM47
Black
Camcorder
Video Games Camcorder with S-Video
Reference section
47
Toshiba 32/37WL58AET (E)
Page 48
Equipment connections
Back connections
Connection example
TV back view
Computer
HDMI device
(see page 52)
amplifier (see page 28)
TV right side view
VCR
(S-Video or Normal )
DVI device
(see page 52)
Set Top Box
Woofer system with
DVD video player
(with component
video outputs)
Equipment
connections
VCR (Recording)
Audio system
(see page 26, 27)
• Before connecting any external equipment, turn off all main power switches.
• Before connecting any external equipment, remove the back terminal cover (see page 10).
• The unauthorized recording of television programs, DVDs, video tapes and other materials may infringe upon the
provisions of copyright laws.
• Connect either the S-VIDEO input terminal or VIDEO input terminal, whichever terminal is used. Never connect
both of these terminals.
• There is a fixed/variable external audio output which enables the connection of a suitable audio system. The
WOOFER OUT terminal allows an external active Woofer system to be connected.
• The COMPONENT VIDEO INPUT consists of three component video signals (Y, PB/CB, PR/CR) and provides the
best picture performance. These terminals can only be used with the component video compatible equipment, e.g.
DVD video player, etc.
• Additional equipment and cables shown are not supplied with this TV.
48
#01E47-52_32/37WL58AET 8/5/05, 3:58 PM48
Black
Toshiba 32/37WL58AET (E)
Page 49
Equipment connections
Connecting a computer
• Before connecting PC and audio cables, remove the back terminal covers (see page 10).
• An analog RGB (15 pin) computer cable can be connected.
To connect a computer
TV back view
Computer
Audio cable
for PC-to-TV connection
Conversion adapter
(if necessary)
RGB PC cable
Introduction
Mini D-sub 15 pin
Getting started
Basic operation
Connect a PC cable from the computer to the RGB/PC terminal on the back of the TV.
The following signals can be displayed:
• VGA: VESA 640 x 480 @ 60 Hz • SVGA: VESA 800 x 600 @ 60 Hz • XGA: VESA 1024 x 768 @ 60 Hz
However, these signal formats are converted to match the number of pixels of the LCD panel.
Therefore, the TV may not display small text properly.
Notes:
• Some PC models cannot be connected to this TV.
• There is no need to use an adapter for computers with DOS/V compatible mini D-sub 15 pin terminal.
•A bar may appear in the upper, lower, right or left side of the screen, or parts of the picture may be obscured
depending on some signals. This is not the malfunction.
• If the edges of the picture are stretched, readjust the picture position adjustments in the PC Setting menu.
• Depending on the specification of the PC you are playing the DVD-Video on, and the DVD’s title, some scenes may
be skipped, or you may not be able to pause during multi-angle scenes.
Signal names for mini D-sub 15 pin connector
Pin assignment for RGB/PC
terminal
11
610
15
15
Pin No. Signal name Pin No. Signal name
1R 9 NC
2G 10 Ground
3B 11 NC
4 NC (not connected) 12 NC
5NC13H-sync
6Ground 14 V-sync
7Ground 15 NC
8Ground
Features
Equipment
connections
Reference section
#01E47-52_32/37WL58AET 8/5/05, 3:58 PM49
Black
49
Toshiba 32/37WL58AET (E)
Page 50
Equipment connections
PC setting
• In the PC input mode, you cannot select the Color, Tint, Sharpness, Black stretch, MPEG NR and DNR in the
Picture setting menu and Cinema mode (see page 13).
• In the PC input mode, the Manual setting (see page 29) is not displayed.
To adjust a PC setting
First press and hold the button until the video input mode list
appears on the screen, then press the or and OK buttons in
order to select the PC input mode (see page 29).
CALL
21 3
54 6
87 9
0
MENU EXIT
DVD
MENU
P
OK
P
To adjust the Picture size/position:
Press the MENU button, then
press the or button to
display the SET UP menu.
Press the or button to
select PC Setting.
Press the OK button to display
the PC Setting menu.
Press the or button to
select an option you want to
adjust. (Picture size/position
menu: Horizontal position,
Horizontal width, Vertical
position and Vertical height)
Press the or button to
adjust the settings as required.
Language
AV connection
PC Setting
MENU
Horizontal position
Horizontal width
Vertical position
Vertical height
Clock phase
Sampling clock
MENU
Horizontal position 0
SET UP
EXIT
Back Watch TV
PC Setting
EXIT
Back Watch TV
English
OK
OK
0
0
0
0
0
0
1/2
Equipment
connections
50
TV
VTR
DVD
#01E47-52_32/37WL58AET 8/5/05, 3:58 PM50
Black
Toshiba 32/37WL58AET (E)
Page 51
Equipment connections
PC setting
(continued)
• If the clock phase, which synchronize the PC signal and LCD display, is not optimized, the picture will blur.
This function enables you to adjust clock phase and display a clear picture.
• If the sampling clock does not match with the dot clock frequency of the PC, blurred picture detail will occur, or
screen width will change, or drift patterns in vertical lines may be apparent.
This function enables you to adjust it and optimize the picture.
• The Reset function adjusts the PC Setting to the factory settings.
To adjust a PC setting (continued)
First press and hold the button until the video input mode list
appears on the screen, then press the or and OK buttons in
order to select the PC input mode (see page 29).
CALL
21 3
54 6
87 9
0
MENU EXIT
DVD
MENU
P
To adjust the clock phase of the picture:
Press the MENU button, then
press the or button to
display the SET UP menu.
Press the or button
to select PC Setting.
Press the OK button, then press
the or button to select
Clock phase.
Press the or button to
obtain a clear picture.
Language
AV connection
PC Setting
MENU
Horizontal position
Horizontal width
Vertical position
Vertical height
Clock phase
Sampling clock
MENU
Clock phase 0
SET UP
EXIT
Back Watch TV
PC Setting
EXIT
Back Watch TV
English
OK
OK
0
0
0
0
0
0
Introduction
Getting started
Basic operation
1/2
Features
OK
P
TV
VTR
DVD
Note:
The optimum points of the clock phase
and sampling clock adjustments may be
incomprehensible according to the input
signals.
To adjust the sampling clock:
From the PC Setting menu,
press the or button
to select Sampling clock.
Press the or button to
optimize the picture.
To reset the PC setting:
From the PC Setting menu,
press the or button to
select Reset on the 2nd page.
Press the OK button.
Horizontal position
Horizontal width
Vertical position
Vertical height
Clock phase
Sampling clock
MENU
Sampling clock 0
Reset
MENU
PC Setting
EXIT
Back Watch TV
PC Setting 2/ 2
EXIT
Back Watch TV
0
0
0
0
0
0
0
OK
1/2
Equipment
connections
Reference section
#01E47-52_32/37WL58AET 8/5/05, 3:59 PM51
Black
51
Toshiba 32/37WL58AET (E)
Page 52
Equipment connections
Connecting an HDMI and a DVI device
• This TV is not intended for connection to and should not be used with a PC.
• When turnning on your electronic components, turn on the TV first, and then the HDMI or DVI device.
• When turnning off your electronic components, turn off the HDMI and DVI device first, and then the TV.
• Before connecting an HDMI and a DVI device, remove the back terminal covers (see page 10).
• This model may not be compatible with features and/or specifications that may be added in the future.
To connect an HDMI and a DVI device
The HDMI input on your TV receives digital audio and uncompressed digital video from an HDMI device and
uncompressed digital video from a DVI device.
This input is designed to accept HDCP program material in digital from EIA/CEA-861/861B compliant consumer
electronic devices (such as a set top box and DVD player with HDMI and DVI output).
The HDMI input is designed for best performance with 1080i (50 Hz/60 Hz) high-definition video signals, but will also
accept and display 480i, 480p, 576i, 576p and 720p (50 Hz) signals.
• HDMI: High-Definition Multimedia Interface
• DVI: Digital Video Interface
• HDCP: High-bandwidth Digital Content Protection
• EIA/CEA-861/861B compliance covers the transmission of uncompressed digital video with high-bandwidth digital
content protection, which is being standardized for reception of high-definition video signals. Because this is an
evolving technology, it is possible that some devices may not operate properly with the TV.
To connect an HDMI device:
One HDMI cable (type A connector)
Equipment
connections
For proper operation, it is recommended that you use a
short HDMI cable.
HDMI cable transfers both video and audio. Separate
analog audio cables are not required.
Some CDVs (video CDs) may not output digital audio
signals. In that case, you may hear sound by connecting
analog audio cables.
HDMI device
VIDEO AUDIO
TV back view
LR
IN
OUT
HDMI OUT
To connect a DVI device:
One HDMI (type A connector)-to-DVI adapter cable
and audio cables
TV back view
DVI device
VIDEO AUDIO
LR
IN
OUT
DVI
OUT
HDMI (type A connector)-to-DVI adapter cable
For proper operation, the length of an HDMI-to-DVI
adapter cable should not exceed 3m. The recommended
length is 2m.
Standard analog audio cables
An HDMI-to-DVI adapter cable transfers only video.
Separate analog audio cables are required.
• HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing , LLC.
52
#01E47-52_32/37WL58AET 8/5/05, 3:59 PM52
Black
Toshiba 32/37WL58AET (E)
Page 53
Reference section
Troubleshooting
• Before calling a service technician, please check the following table for a possible cause of the symptom and some
solutions.
Symptom and solution
Symptom Solution
TV will not turn on • Make sure the power cord is plugged in, then press .
• The remote control batteries may be dead. Replace the batteries.
No picture, no sound • Check the antenna connections.
No sound, picture OK • The sound may be muted. Press +, – or .
• The station may have broadcast difficulties. Try another channel.
• Check that the Speaker function in SOUND menu is properly set.
Poor sound, picture OK • The station may have broadcast difficulties. Try another channel.
Poor picture, sound OK • Check the antenna connections.
• The station may have broadcast difficulties. Try another channel.
• Adjust the PICTURE menu.
Poor reception of broadcast channels • Check the antenna connections.
• The station may have broadcast difficulties. Try another channel.
• Make sure the Color system is properly set.
Introduction
Getting started
Basic operation
Teletext problems • Check the antenna connections.
Good performance of text depends on a good strong broadcast signal.
Multiple images • The station may have broadcast difficulties. Try another channel.
• Antenna reception may be poor. Use a high directional outdoor
antenna.
• Check if the direction of the antenna has changed.
Poor color or no color • The station may have broadcast difficulties. Try another channel.
• Adjust the Tint and/or Color in the PICTURE menu.
The remote control does not operate • Remove all obstructions between the remote control and the remote
control sensor in the TV.
• The remote control batteries may be dead. Replace them with new
ones.
• Check that the TV/VCR/DVD switch on the remote control is
properly set.
Some pixels of the screen do not light up • The LCD display panel is manufactured using an extremely high
level of precision technology, however, sometimes some pixels of the
screen may be missing picture elements or have luminous spots. This
is not a sign of a malfunction.
The brightness of the screen comes
down, or flickers of the screen are
caused, or some parts of the screen do
not light up.
• When you just buy and start to use this TV, a flickering may be
caused in the screen. In this case, switch off the TV, then switch on it
again to cure the condition.
• The cold cathode fluorescent lamp used for the back light on this TV
has longevity. When the brightness of the screen comes down, or the
flickers of the screen are caused, or some parts of the screen do not
light up, it may reach the end of its life. Contact a service technician.
Features
Equipment
connections
Reference section
The picture brightness varies when you
switch the TV on.
#01E53-56_32/37WL58AET 8/5/05, 3:59 PM53
Black
• If you switch the TV on at 0°C and under, wait until the display
warms up.
53
Toshiba 32/37WL58AET (E)
Page 54
Reference section
Broadcast system, Specifications
Broadcast transmission systems of each country or region
Area Country or Region
Bahrain, Kuwait, Israel, Oman, Qatar, United Arab Emirates, Yemen, etc.
Indonesia, Malaysia, Singapore, Thailand, etc.
China PAL D/K
Asia
M. E.
Oceania Australia, New Zealand, etc. PAL B/G
Africa Republic of South Africa, etc. PAL I
South
America
Note:
PAL, SECAM and NTSC 3.58 (MHz) are different color signal broadcast transmission systems applicable to different
countries or region. NTSC 4.43 (MHz) is used in special VCRs to playback NTSC recorded video tapes through PAL
television equipment.
China Hong Kong PAL I
Iraq, Islamic Republic of Iran, Lebanon, Saudi Arabia, etc. SECAM B/G
Russian Federation, etc. SECAM D/K
Myanmar, etc. NTSC M
Argentina, Paraguay, Uruguay, etc. PAL N
Brazil PAL M
Chile, Colombia, etc. NTSC M
Color Sound
System
PA L B/G
LCD color television
Model 32WL58A, 32WL58E, 32WL58T, 37WL58A, 37WL58E, 37WL58T
Power source 32/37WL58A : 220V - 240V AC, 50Hz
32/37WL58E : 220V - 240V AC, 50/60Hz
32/37WL58T : 110V - 240V AC, 50/60Hz
Power consumption 32WL58A, 32WL58E, 32WL58T : 175W, 0.5W (standby)
37WL58A, 37WL58E, 37WL58T : 200W, 0.5W (standby)
Dimensions 32WL58A, 32WL58E, 32WL58T : 794 mm (W) × 603 mm (H) × 300 mm (D)
37WL58A, 37WL58E, 37WL58T : 915 mm (W) × 670 mm (H) × 300 mm (D)
Mass (Weight) 32WL58A, 32WL58E, 32WL58T : 21.5 kg
37WL58A, 37WL58E, 37WL58T : XXX kg
Television system Channel coverage:
(Antenna input) PAL B/G (CCIR) VHF 2 - 12
UHF 21 - 69
CATV X - Z+2, S1 - S41
PA L I ( UK) VHF -
UHF 21 - 69
Reference section
PA L D/K (CHINA) VHF 1 - 12
SECAM B/G (CCIR) VHF 2 - 12
SECAM D/K (OIRT) VHF 1 - 12
CATV -
UHF 13 - 57
CATV Z1 - Z38
UHF 21 - 69
CATV X - Z+2, S1 - S41
UHF 21 - 69
CATV X1 - X19
54
#01E53-56_32/37WL58AET 8/5/05, 4:00 PM54
Black
Toshiba 32/37WL58AET (E)
Page 55
LCD color television (continued)
Television system NTSC M (US) VHF 2 - 13
(Antenna input) UHF 14 - 69
CATV A6 - A1, A - W, AA - ZZ, AAA, BBB
NTSC M (JAPAN) VHF 1 - 12
UHF 13 - 62
CATV M1 - M10, S1 - S41
Special RF signal:
NTSC 4.43 color system 5.5/6.0/6.5 MHz sound system
PA L 60 Hz color system 5.5/6.0/6.5 MHz sound system
COMPONENT VIDEO INPUT 480i, 480p, 576i, 576p, 720p (50/60 Hz), 1080i (50/60 Hz)
terminals (the signal format) (These signal formats are converted to match the number of pixels of the LCD
panel.)
Color system PAL, SECAM, NTSC 3.58/4.43
Aspect ratio 16 : 9
Visible size (diagonal) 32WL58A/E/T: 80.0 cm
37WL58A/E/T: 94.0 cm
Number of pixels 1366 (H) dots × 768 (V) dots
Audio power 10 W + 10 W (10% THD)
Speakers Main : 60 × 120 mm 2 pcs.
Tweeter : 33mm (round) 2 pcs.
Input/Output terminals (1) Input 4 pin S-video
Phono jacks A/V
(2) Input 4 pin S-video
Phono jacks A/V
(C1) Input Component video Y, PB/CB, PR/CR
Phono jacks A/V
(C2) Input Component video Y, PB/CB, PR/CR
Phono jacks A/V
MONITOR OUT Output Phono jacks A/V
AUDIO OUT Output Phono jacks Audio L+R (Fixed/Variable)
WOOFER OUT Output
RGB/PC Input Mini D-sub 15 pin Analog RGB
RGB/PC (AUDIO) Input 3.5 mm stereo mini jack
HDMI 1 Input (type A) 19 pin A/V Digital
HDMI 1 AUDIO Input Phono jacks Analog L+R
HDMI 2 Input (type A) 19 pin A/V Digital
HDMI 2 AUDIO Input Phono jacks Analog L+R
Headphone jack 3.5 mm (Diameter) stereo
Operating condition Temperature 0°C - 35°C
Humidity 20% - 80% (No moisture condensation)
Supplied accessories Owner’s manual (1), Remote control (1), Batteries (2),
Clip (1)
Phono jack Bass Line out (Variable)
Introduction
Getting started
Basic operation
Features
Equipment
connections
Reference section
• Design and specifications are subject to change without notice.
• Never service or remodel the TV by yourself. It may expose you to a fire hazard or dangerous voltages.
#01E53-56_32/37WL58AET 8/5/05, 4:00 PM55
Black
This is used to fix the TV to
a wall, pillar, etc. (see page 4).
55
Toshiba 32/37WL58AET (E)
Page 56
TOSHIBA CORPORATION
#01E53-56_32/37WL58AET 8/5/05, 4:00 PM56
Black
YC/J
23566763
Loading...