TOSHIBA 32C3030D User Manual

C3030
X3030
Series
TOSHIBA
C3000D Euro OM Cov 29/1/07 3:28 pm Page 1
English
3
Contents
SETTING UP
Safety precautions – Some do’s and don’ts for you to be aware of 4 Installation and important information 5 The remote control – an at-a-glance guide 6 Connecting external equipment – a guide to connecting external equipment to the back of the television 7 Connecting a computer – connecting a computer to the back of the television 8 Controls and input connections – switching on the television, standby, using the controls on the television,
headphone socket, connecting equipment to the side input sockets 9
TUNING THE TELEVISION
DIGITAL – tuning the television for the first time 10 DIGITAL – auto tuning 11 DIGITAL – programme sorting, manual tuning 12 ANALOGUE – tuning analogue mode for the first time, language, country 13 ANALOGUE – manual tune, broadcast system 14 ANALOGUE – auto tune 15 ANALOGUE – programme skip, sorting programme positions 16
CONTROLS AND FEATURES
General controls – changing programme position 17 Stereo and bilingual transmissions – stereo/mono or dual language broadcasts 17 Time display (analogue only) 17 Sound controls – volume, sound mute, bass/treble/balance 17 Sound controls – bass boost, super woofer, dual (analogue only), stable sound
®
18 SRS WOW™ sound effects – SRS 3D, FOCUS and TruBass 18 Widescreen viewing 19 Picture controls – picture position (analogue only), back light 21 Picture controls – picture preferences (contrast, brightness, colour, tint, sharpness), black stretch,
MPEG noise reduction (MPEG NR), digital noise reduction (DNR) 22 Picture controls – colour temperature, 3D colour management, base colour adjustment 23 Picture controls – active backlight control, cinema mode, antenna amplifier, automatic format (widescreen) 24 Picture controls – 4:3 stretch, blue screen, side panel adjustment, picture still 25 Panel lock – disabling the buttons on the television 25
DIGITAL – programme timer 26
Sleep timer 26
DIGITAL – on-screen information and programme guide 27 DIGITAL settings – parental controls (setting the PIN, mode) 28 DIGITAL settings – favourite programmes, locked programmes, encrypted programmes 29 DIGITAL settings – audio languages, audio output, subtitles, reset TV, common interface 30 DIGITAL settings – software upgrade (version, automatic upgrade, searching for new software) 31
PC settings – picture position, clock phase, sampling clock, reset 32 Input selection and AV connections – input and output sockets for connected equipment,
analogue switch off 33
TEXT SERVICES
ANALOGUE text – setting up, general information, Auto. and LIST modes 35 ANALOGUE text – control buttons 36
PROBLEM SOLVING
Questions and Answers – answers to some of the more common queries including
manual fine tuning and colour system 37
INFORMATION
Notes – for your own records 40 Information – signal information 41 Specifications and Accessories – technical information about the television, supplied accessories 42
C3000D Eng Euro OM 28/1/07 8:09 pm Page 3
English
4
Safety Precautions
This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety. They are of a general nature, intended to help with all electronic consumer products and some points may not apply to the goods you have just purchased.
DO NOT obstruct the ventilation openings of the equipment with items such as newspapers, tablecloths, curtains, etc. Overheating will cause damage and shorten the life of the equipment.
DO NOT allow electrical equipment to be exposed to dripping or splashing or objects filled with liquids, such as vases, to be placed on the equipment.
DO NOT place hot objects or naked flame sources, such as lighted candles or nightlights on, or close to equipment. High temperatures can melt plastic and lead to fires.
DO NOT use makeshift stands and NEVER fix legs with wood screws. To ensure complete safety, always fit the manufacturers’ approved stand, bracket or legs with the fixings provided according to the instructions.
DO NOT leave equipment switched on when it is unattended, unless it is specifically stated that it is designed for unattended operation or has a standby mode. Switch off by withdrawing the plug, make sure your family know how to do this. Special arrangements may need to be made for people with disabilities.
DO NOT continue to operate the equipment if you are in any doubt about it working normally, or it is damaged in any way – switch off, withdraw the mains plug and consult your dealer.
WARNING – excessive sound pressure from earphones or headphones can cause hearing loss.
ABOVE ALL – NEVER let anyone, especially children, push or hit the screen, push anything into holes, slots or any other openings in the case.
NEVER guess or take chances with electrical equipment of any kind – it is better to be safe than sorry.
Leave more than 10cm clearance around the television to allow adequate ventilation. This will prevent overheating and possible damage to the television. Dusty places should also be avoided.
Damage may occur if the television is left in direct sunlight or near a heater. Avoid places subject to extremely high temperatures or humidity. Place in a location where the temperature remains between 5°C (41°F) min. and 35°C (94°F) max.
The mains supply required for this equipment is 220-240v AC 50/60Hz. Never connect to a DC supply or any other power source. DO ensure that the television is not standing on the mains lead. DO NOT cut off the mains plug from this equipment, this incorporates a special Radio Interference Filter, the removal of which will impair its performance.
IF IN DOUBT PLEASE CONSULT A COMPETENT ELECTRICIAN.
DO read the operating instructions before you attempt to use the equipment.
DO ensure that all electrical connections (including the mains plug, extension leads and inter-connections between pieces of equipment) are properly made and in accordance with the manufacturers’ instructions. Switch off and withdraw the mains plug before making or changing connections.
DO consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.
DO be careful with glass panels or doors on equipment.
Air Circulation
Do not
Heat Damage
Mains Supply
Do
DO NOT REMOVE ANY FIXED COVERS AS THIS WILL EXPOSE DANGEROUS AND 'LIVE' PARTS.
THE MAINS PLUG IS USED AS A DISCONNECTING DEVICE AND THEREFORE SHOULD BE READILY OPERABLE.
C3000D Eng Euro OM 28/1/07 8:09 pm Page 4
English
5
Installation and important information
Where to install
Locate the television away from direct sunlight and strong lights, soft, indirect lighting is recommended for comfortable viewing. Use curtains or blinds to prevent direct sunlight falling on the screen.
Place on a sturdy platform, the mounting surface should be flat and steady. It should then be secured to the wall with a sturdy tie using the clip on the back of the stand, or secured to the platform using the fixing strap located underneath the table top stand, this will prevent it from falling over.
The LCD display panels are manufactured using an extremely high level of precision technology, however sometimes some parts of the screen may be missing picture elements or have luminous spots. This is not a sign of a malfunction.
Make sure the television is located in a position where it cannot be pushed or hit by objects, as pressure will break or damage the screen, and that small items cannot be inserted into slots or openings in the case.
Please take note
EXCLUSION CLAUSE
Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by: i) fire; ii) earthquake; iii) accidental damage; iv) intentional misuse of the product; v) use of the product in improper conditions; vi) loss and/or damage caused to the product whilst in the possession of a third party; vii) any damage or loss caused as a result of the owner’s failure and/or neglect to follow the instructions set out in the owner’s
manual;
viii) any loss or damage caused directly as a result of misuse or malfunction of the product when used simultaneously with
associated equipment;
Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or damage including but not limited to the following, loss of profit, interruption of business, the loss of recorded data whether caused during normal operation or misuse of the product.
NOTE: A Toshiba wall bracket or stand, where available, must be used. If a non Toshiba wall bracket or stand is used the product’s BEAB approval will become void and the equipment is then used at the consumers own risk.
If stationary images generated by text services, channel identification logos, computer displays, video games, on screen menus, etc. are left on the television screen for any length of time they could become conspicuous, it is always advisable to reduce both the brightness and contrast settings.
Side View Top View
Sturdy tie
(as short as possible)
Clip
Clip
Clip
English
6
The remote control
UP
Simple at-a-glance reference of your remote control.
Remove the back cover to reveal the battery compartment and make sure the batteries are inserted the right way round. Suitable battery types for this remote are AAA, IEC R03 1.5V.
Do not combine a used, old battery with a new one or mix battery types. Remove dead batteries immediately to prevent acid from leaking into the battery compartment. Dispose of them in a designated disposal area. Warning: batteries must not be exposed to excessive heat such as sunshine, fire or the like.
The performance of the remote control will deteriorate beyond a distance of five metres or outside an angle of 30 degrees from the centre of the television. If the operating range becomes reduced the batteries may need replacing.
Inserting batteries and effective range of the remote
To change programme positions and text pages
To display digital on-screen information
To call up text services in analogue mode
To exit Menus
Selectable picture preferences
To select mode
To select input from external sources
To mute the sound
Widescreen viewing
On-screen Menus
To alter the volume
To display the digital on-screen
Programme Guide
Text control buttons
To switch between TV, Radio and Favourite programmes when in digital mode
Number buttons
To return to the previous programme
To switch between ATV (analogue
television) and DTV (digital television)
For On/Standby mode
When using a TOSHIBA VCR or DVD:
press
m
/
ll
r
to PAUSE/STEP
press
r
to PLAY
press
q
to REWIND
press
s
to FAST FORWARD
press
w
to EJECT
press
p
to STOP
press
l
q
to SKIP-REWIND
press
s
l
to SKIP-FORWARD
When using menus the arrows move the cursor on the screen up, down, left or right. OK to confirm your selection
When in TV mode:
u Still picture
OI/II
Stereo/bilingual transmissions
SUBTITLE Digital Subtitles
8/9
Time display
When using the Programme Guide:
l
q
– 24 hours
s
l
+ 24 hours
q
– 1 page
s
+ 1 page
C3000D Eng Euro OM 28/1/07 8:09 pm Page 6
English
7
Connecting external equipment
Before connecting any external equipment, turn off all main power switches. If there is no switch remove the mains plug from the wall socket.
It is designed for best performance with 1080i and 1080p high-definition video signals but will also accept and display 480i, 480p, 576i, 576p and 720p signals. NOTE: For 1080p it is recommended that approved HDMI cable up to 5m long is used. If the unit has DVI output a special conversion cable from DVI to HDMI will be required.
PLEASE NOTE: Although this television is able to connect to HDMI equipment it is possible that some equipment may not operate correctly.
A wide variety of external equipment can be connected to the back of the television, therefore the relevant owners manuals for all additional equipment must be referred to.
We recommend SCART 1 for a decoder and SCART 2 for a media recorder. If connecting S-VIDEO equipment, set the INPUT for EXT2. See page 33.
If the television automatically switches over to monitor external equipment, return to normal television by pressing the desired programme position button. To recall external equipment, press
B
to select between DTV, EXT1, EXT2,
EXT3C, HDMI1, HDMI2, PC or ATV.
HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC.
Aerial cables:
Connect the aerial to the socket on the rear of the television. If you use a decoder* and/or a media recorder it is essential that the aerial cable is connected through the decoder and/or through the media recorder to the television.
SCART leads:
Connect the video recorder IN/OUT socket to the television. Connect the decoder TV socket to the television. Connect the media recorder SAT socket to the decoder MEDIA REC. socket.
Before running Auto tuning put your decoder and media recorder to Standby.
The phono sockets alongside the COMPONENT VIDEO INPUT sockets will accept L and R audio signals.
The Digital Audio Output socket enables the connection of a suitable surround sound system. NOTE: this output is
always active.
In addition there is a fixed external audio ouput which enables the connection of a suitable Hi-Fi unit. Make sure the Speaker option in the Sound menu is set to Off.
HDMI™ (High-Definition Multimedia Interface) is for use with a DVD, decoder or electrical equipment with digital audio and video output.
media recorder
decoder*
CABLE HOLDER
FIXING STRAP
HDMI™ INPUT
SOCKETS
COMMON INTERFACE
The Common Interface is for a
Conditional Access Module (CAM).
Contact a service provider.
SCART 2 (EXT2)
COMPONENT VIDEO (EXT3)
SCART 1 (EXT1)
*
a decoder could
be Digital Satellite
or any other compatible decoder.
The cable holder
can be used for aerial,
media recorder and
audio cables. Do not
use as a handle and
remove all cables
before moving the
television.
IN/OUT
MEDIA REC.
TV
SAT
DIGITAL AUDIO
OUTPUT
(DTV MODE ONLY)
C3000D Eng Euro OM 28/1/07 8:09 pm Page 7
English
8
Connecting a computer
the back of your television
Computer
Audio cable for PC to
television connection
(not supplied)
Conversion adaptor if required (not supplied)
RGB PC cable
(not supplied)
Mini D-sub
15 pin connector
Before connecting any external equipment, turn off all main power switches. If there is no switch remove the mains plug from the wall socket.
Connect the PC cable from the computer to the PC terminal on the back of the television.
Connect the audio cable to the PC/HDMI1 Audio socket on the back of the television. Select PC from the PC/HDMI1 audio options in the AV connection menu located in the SET UP menu.
Press the Bto select PC mode.
PLEASE NOTE:
Some PC models cannot be connected to this television.
An adaptor is not needed for computers with a DOS/V compatible mini D-sub 15 pin terminal.
A band may appear at the edges of the screen or parts of the picture may be obscured. This is due to scaling of the picture by the set, it is not a malfunction.
When PC input mode is selected some of the television’s features will be unavailable e.g. Manual
setting in the SET UP menu, Colour, Tint, DNR and Black Stretch in the Picture settings menu.
The following signals can be displayed:
VGA: 640 x 480/60 Hz (VESA) VGA: 640 x 480/75 Hz (VESA) SVGA: 800 x 600/60 Hz (VESA) SVGA: 800 x 600/75 Hz (VESA) XGA: 1024 x 768/60 Hz (VESA) XGA: 1024 x 768/70 Hz (VESA) XGA: 1024 x 768/75 Hz (VESA) WXGA: 1280 x 768/60 Hz (VESA) WXGA: 1280 x 768/60 Hz (VESA) – Reduced Blanking WXGA: 1280 x 768/75 Hz (VESA) WXGA: 1360 x 768/60Hz (VESA) SXGA: 1280 x 1024/60 Hz SXGA: 1280 x 1024/75 Hz
IMPORTANT NOTE: SXGA will display but it will not be to VESA standards.
When connecting a PC using HDMI the following signals can be accepted:
1080i 50/60Hz 1080p 50/60Hz 720p 50/60Hz
C3000D Eng Euro OM 28/1/07 8:09 pm Page 8
English
9
Controls and input connections
If the RED LED is unlit check that the mains plug is connected to the power supply. If the picture does not appear press ion the remote control, it may take a few moments.
To put the television into Standby press ion the remote control, the GREEN active standby LED will appear (see ‘Software Upgrade’ section) next to the RED for a few moments then disappear. To view the television press
i
again. The picture may take a few seconds to appear.
A wide variety of external equipment can be connected to the input sockets on the side of the television.
Whilst all the necessary adjustments and controls for the television are made using the remote control, the buttons on the television may be used for some functions.
To alter the volume press j +.
To alter the programme position press
eeFff
.
Press MENU and S,R, Q or P to control the sound and picture options.
Press MENU twice to finish.
When connecting sound equipment to EXT3, connect the audio output of the equipment to the phono sockets on the television.
To select the Input, press Buntil the display shows EXT3 as described on page 33. The television will automatically sense the type of signal.
Please always refer to the owner’s manual of the equipment to be connected for full details.
Please note: Inserting the headphone plug will mute the
sound from all speakers.
Switching on
Using the controls and connections
Standby
GREEN LED – Active standby (digital only) GREEN LED – Timer (analogue only)
RED LED – Standby GREEN LED – Power on
INPUT 3
(EXT3)
Press the MENU button on the remote control to see the menus.
In digital mode the menu bar at the top of the screens will show three different topics shown in symbols. As each symbol is selected by pressing the zorxbutton on the remote control, its respective options will appear below.
In analogue mode the menu appears as a list of five topics. As each symbol is selected by pressing the
zorx
button on the remote control, its respective options will appear below.
To use the options press the
f
andebutton on the remote control to move up and down through them and OK, zorxto select the required choice. Follow the on screen instructions. The functions of each menu are described in detail throughout the manual.
Using the remote control
Input 3 (side) will take priority over
EXT3 (back) if
both connections
are used at the
same time.
C3000D Eng Euro OM 28/1/07 8:09 pm Page 9
English
10
Tuning Digital television for the first time
Before switching on the television put your decoder and media recorder to Standby if they are connected and ensure the aerial is connected. To set up the television use the buttons on the remote control as detailed on page 6.
EXIT
Cancel
AUTO TUNING
Progress
Prog. Name Type UHF Quality
70 CBBC Channel 34 GOOD
87 Community 21 POOR
5
Use eorfto move through the list to select a programme then press OK to view.
When the search is complete the television will automatically select programme one.
The AUTO TUNING screen will display the total number of services found.
Change Watch
Page Up Page Down Sort
AUTO TUNING
94 programmes found
58 TV 27 Radio 9 Text
Press OK to watch programme
Prog. Name Type UHF Quality
1 BBC ONE 34 GOOD
2 BBC TWO 34 GOOD
3 ITV1 31 GOOD
4 Channel 4 31 POOR
5 Five 48 GOOD
6 ITV2 31 POOR
1
2
3
4
Press the ibutton, the LOCAL OPTIONS screen will appear. This screen will appear the first time that the television is switched on and each time the television is reset.
Press
e
to highlight Country and zorxto select. The television will now tune the stations for your country.
Using
e
highlight Language, then zorxto
select.
Press OK to start tuning.
The AUTO TUNING screen will appear and the television will start to search for available stations. The progress bar will move along the line.
You must allow the television to complete
the search.
LOCAL OPTIONS
Country UK
Language ENGLISH
Audio Language ENGLISH
Audio Output PCM
Subtitles OFF
Local Time Settings 0
Continue
NOTE: The time will be set automatically by transmission but can be advanced or decreased by up to 2 hours using Local Time Settings.
C3000D Eng Euro OM 28/1/07 8:09 pm Page 10
English
11
Use eorfto move through the list to select a programme then press OK to view.
3
NOTE: As new services are broadcast it will be necessary to re-tune the television in order to view them.
Digital auto tuning
The television will start to search for all available stations.
You must allow the television to complete the search.
When the search is complete the Auto tuning screen will display the total number of services found.
Auto tuning
1
Press MENU, the SETUP MENU will appear. Use eto highlight Auto tuning. Press OK.
A screen will appear warning that previous digital programmes and settings will be deleted. Press OK to continue with the Auto tuning.
2
Auto tuning will completely re-tune the television and
can be used to up date the channel list.
It is recommended that Auto tuning is run
periodically to ensure that all new services are
added. All current programmes and settings, i.e.
favourites and locked programmes, will be lost.
WARNING
! All previous digital programmes and
settings will be deleted. Continue?
YES
Select
MENU
Cancel
EXIT
Cancel
AUTO TUNING
Progress
Prog. Name Type UHF Quality
70 CBBC Channel 34 GOOD
87 Community 21 POOR
AUTO TUNING
94 programmes found
58 TV 27 Radio 9 Text
Press OK to watch programme
Prog. Name Type UHF Quality
1 BBC ONE 34 GOOD
2 BBC TWO 34 GOOD
3 ITV1 31 GOOD
4 Channel 4 31 POOR
5 Five 48 GOOD
6 ITV2 31 POOR
Change Watch
MENU
Back
Page Up Page Down Sort
C3000D Eng Euro OM 28/1/07 8:09 pm Page 11
English
12
NOTE: When the television is switched off the mode being viewed at the time will automatically be selected when the television is switched back on.
Digital programme sorting,
manual tuning
With the list of stations now showing use eor
f
to highlight the station you want to move and
press x.
The selected station will be moved to the right of the screen.
Sort Store
MENU
Back
EXIT
Watch TV
Page Up Page Down
PROGRAMMES
Prog. Name
1 BBC ONE
2 BBC TWO
3 ITV1
4 Channel 4
5 Five
6 ITV2
4
3
5
Use eorfto move through the list to your preferred position. As you do so the other stations will move to make room.
Press zto store your move. Repeat as necessary, then press EXIT.
1
2
3
Select Manual tuning from the SETUP MENU and press OK.
Enter the multiplex number using the number buttons and then press OK. The television will automatically search for that multiplex.
When the multiplex is found any channels not currently on the programme list will be added and the programme information at the top of the screen will be updated.
Repeat as necessary. Press EXIT to finish.
This feature is available for service engineers or can be
used for direct channel entry if the multiplex channel
is known.
Manual tuning
1
The station order may be changed to suit personal preference. Press MENU, the SETUP MENU will appear on screen.
Use
e
to move down through the list and
highlight Programmes. Press OK.
2
Programme sorting
SETUP MENU
TV Setup OK
Local Options OK
Auto tuning OK
Manual tuning OK
Programmes OK
MENU
Back
EXIT
Watch TV
C3000D Eng Euro OM 28/1/07 8:09 pm Page 12
English
13
Tuning Analogue mode for the first time
The Quick Setup feature will tune all analogue channels currently available in the area. To put the television into ATV mode press the A/D button.
Manual tuning
Prog. Channel Station
1 C22 BBC1
2 C28 BBC2
3 C25 ITV
4 C32 CH4
5 C68
6 C69
OK
Select Sort
MENU
Back
EXIT
Watch TV
3
4
2
Using zorxselect your language, then press OK.
Then press zorxto select your country.
To start Auto tuning press OK.
Auto tuning
Searching
Channel : C22 Station : BBC1
EXIT
Stop
5
The search will begin for all available stations. The slide bar will move along the line as the search progresses.
You must allow the television to complete
the search.
When the search is complete the television will automatically select programme position 1 and the Manual tuning screen will appear.
Use
eorf
to move through the list to select a
programme then press EXIT to view.
The station order may be changed using the
Manual tuning screen (see the analogue ‘Sorting programme positions’ section).
6
1
Select ATV mode. The Quick Setup screen will appear.
Quick Setup
Select your language.
Language English
EXIT
Watch TV
OK
Next
C3000D Eng Euro OM 28/1/07 8:09 pm Page 13
English
14
Manual tuning
Prog. Channel Station
0 C60
1 C22 BBC1
2 C28 BBC2
3 C25 ITV
4 C32 CH4
5 C69
OK
Select Sort
MENU
Back
EXIT
Watch TV
4
Press xto select System and use foreto change if required.
Then press xto select Search.
Press foreto begin the search. The search symbol will flash.
Analogue manual tune
Press OK to select. If the programme is skipped, Programme skip must be removed before storing.
The television can be tuned-in manually using Manual tuning. For example: if the television cannot be connected to a media recorder/decoder with a SCART lead or to tune-in a station on another System.
Programme: The number to be pressed on the remote control.
System: Specific to certain areas.
Colour system: Factory set to Auto, should only be changed if problems are experienced, i.e. NTSC input from
external source.
Programme skip: means nothing has been stored or the facility to skip the channel is ON. See page 16.
Channel: The channel number on which a station is being broadcast.
Search: Search up and down for a signal.
Manual fine tuning: Only used if interference/weak signal is experienced. See page 37.
Station: Station identification. Use the
f
or eand zorxbuttons to enter up to seven characters.
Station
Programme System
Colour system
Channel Search
Programme
skip
Manual fine
tuning
Use foreto highlight the programme position required e.g. we suggest Prog. 0 for a media recorder.
Press MENU and using
z
or xselect the SET UP menu, with ehighlight Manual tuning, press OK to select.
To allocate a programme position on the television for a decoder and media recorder: turn the decoder on,
insert a pre-recorded film in the media recorder and press PLAY, then manually tune.
Use zandxto move across the screen and select any of these Manual Tune options.
1
2
3
Each signal will show on the television, if it is not your media recorder, press foreagain to restart the search.
7
5
6
1/2
Manual tuning
System
0 I A C 60 0
OK
Store
MENU
Back
EXIT
Watch TV
Manual tuning
Search: Up
0 I A C 60 0
OK
Store
MENU
Back
EXIT
Watch TV
Different
Channel
numbers may be displayed
SET UP
Language English
Country UK
Auto tuning
OK
Manual tuning
OK
Antenna Amplifier On
AV connection
OK
MENU
Back
EXIT
Watch TV
C3000D Eng Euro OM 28/1/07 8:09 pm Page 14
English
15
Using Auto tuning
1
2
3
4
5
To set up the television using Auto tuning, press MENU and use zorxto select the SET UP
menu.
You must allow the television to complete the search.
When the search is complete the television will automatically select programme position 1. This may not be a clear picture, so the station order can be changed (see 'Sorting programme positions' section).
Press eto highlight Language and zorxto select.
Using ehighlight Country, then zorxto select. The television will now tune the stations for your country.
Press eto highlight Auto tuning, then press OK.
1/2
Auto tuning
Previous settings will be lost ! Press EXIT for no change. Press OK to start Auto tune.
MENU
Back
EXIT
Watch TV
!
Analogue manual tune continued,
Auto tune
When your media recorder signal is found, press
x
to move along to Station. With f, e, zand
x
put in the required characters, e.g. VCR.
This television has direct channel entry if the channel numbers are known.
Select the Manual tuning screen in Step 3. Enter the Programme number, the System, then C for standard (terrestrial) channels or S for cable channels and the Channel number. Press OK to store.
8
Press OK to store.
Repeat for each programme position you want to tune or, press MENU to return to the list of channels and select the next number to tune.
Press EXIT when you have finished.
To name external equipment, e.g. DVD on EXT2, press Bto select B2, then select Manual setting from the SET UP menu.
Press xto select Label then using f, e, zand
x
put in the required characters. Press OK.
10
11
12
13
9
PLEASE NOTE
Manual tuning
Station
0 I A C 60 0 V C R
OK
Store
MENU
Back
EXIT
Watch TV
Manual setting
Label
EXT2 A D V D
OK
Store
MENU
Back
EXIT
Watch TV
SET UP
Language English
Country UK
Auto tuning
OK
Manual tuning
OK
Antenna Amplifier On
AV connection
OK
MENU
Back
EXIT
Watch TV
To start Auto tuning press OK.
C3000D Eng Euro OM 28/1/07 8:09 pm Page 15
English
16
Manual tuning
Prog. Channel Station
1 C22 BBC1
2 C28 BBC2
3 C25 ITV
4 C32 CH4
5 C68
6 C69
OK
Select Sort
MENU
Back
EXIT
Watch TV
Analogue programme skip, sorting programme positions
Press MENU and repeat from Step 2 or press EXIT.
Each programme position has to be individually selected. To turn Programme skip off, repeat the procedure for each position.
Skipped programme positions cannot be selected by P P and P Q or by the controls on the television, but can still be accessed by the number buttons on the remote control.
3
4
5
Use foreto highlight the programme position to be skipped and press OK to select.
Press
x
to select Programme skip.
Use
fore
to turn Programme skip on.
Press OK.
on the screen indicates a skipped
programme position.
To prevent certain programmes from being viewed, the
programme position can be skipped. The remote control
must be removed as the channels will still be available using
the number buttons
. Programmes can then be watched as
normal using the controls on the television, but the television
will not show the skipped programme position.
Programme skip
Select Manual tuning from the SET UP menu.
1
Channels may be moved and stored on the programme
position of your choice.
Sorting programme positions
Select Manual tuning from the SET UP menu.
With the list of stations now showing use
eorf
to highlight the station you want to move and press x.
The selected station will be moved to the right of the screen.
1
2
Manual tuning
Programme skip : On
1 I A C 22 0 B B C 1
OK
Store
MENU
Back
EXIT
Watch TV
2
3
4
Use eorfto move through the list to your preferred position. As you do so the other stations will move to make room.
Press zto store your move.
Repeat as necessary, then press EXIT.
Manual tuning
Prog. Channel Station
1 C22 BBC1
2 C28 BBC2
3 C25 ITV
4 C32 CH4
5 C68
6 C69
Store
MENU
Back
EXIT
Watch TV
C3000D Eng Euro OM 28/1/07 8:09 pm Page 16
English
17
Bass, Treble and Balance
4
5
In digital mode, press MENU and using
e
highlight TV setup then press OK.
Use zorxto select SOUND.
In analogue mode, press MENU and zorxto select SOUND.
1
2
3
The sound controls are accessible in digital and
analogue modes, as are most of the televisions features.
SOUND
Dual Dual 1
Bass 0
Treble 0
Balance 0
WOW
OK
Stable sound Off
MENU
Back
EXIT
Watch TV
1/2
General controls, stereo/bilingual
transmissions, time display, sound controls
Volume
Press j— or
j
+ to adjust the volume.
Sound Mute
Press konce to turn the sound off and again to cancel.
To select a programme position use the numbered buttons on the remote control.
Programme positions can also be selected using PP and P Q.
To revert to the previous programme position press
^^
.
To display on-screen information i.e. programme position, channels or stereo/mono signal, press . Press again to cancel.
Selecting programme positions
Sound controls
The time display facility allows the current (text service)
time to be seen on the television screen.
Press
8/9
whilst watching a normal television broadcast to see a time display from the broadcaster. It will remain on screen for about 5 seconds.
The Time Display – analogue only
i
+
If stereo or dual language broadcasts are transmitted the word Stereo or Dual will appear on the screen each time
programme positions are changed, disappearing after a
few seconds. If the broadcast is not in stereo the word
Mono will appear.
Stereo… Press
OI/II to select Stereo or Mono.
Bilingual… Bilingual transmissions are rare. If they are
transmitted the word Dual will display. Choose the required programme number and if the word Dual appears press
OI/II to select Dual 1, Dual 2 or Mono.
Stereo and Bilingual transmissions
Press eto highlight Bass, Treble or Balance and zorxto change the setting.
When connecting to a Hi-fi unit, set the Speaker option to Off. Press eto highlight Speaker and
zorx
to select Off.
2/2
SOUND
Speaker Off
Bass boost On
Bass boost level 70
MENU
Back
EXIT
Watch TV
C3000D Eng Euro OM 28/1/07 8:09 pm Page 17
English
18
2/2
SOUND
Speaker On
Bass boost On
Bass boost level 70
MENU
Back
EXIT
Watch TV
Sound controls continued, SRS WOW™ sound
effects, dual, stable sound
®
SRS WOW™sound effects
SRS WOW™ is a suite of audio effects which use the
stereo signals being broadcast to produce enhanced sound
from the television’s speakers. If mono sound is broadcast
only TruBass will be available.
SRS 3D gives a rich sound experience, FOCUS
concentrates the sound and gives the effect of it coming from the centre of the television, TruBass enhances the
lower bass frequencies.
Stable sound
®
The Stable Sound feature limits high volume levels on the
TV speakers, preventing the extreme changes in volume
that can occur when channels are changed or a
programme switches to a commercial.
Bass boost
In the SOUND menu press eto highlight Bass boost. Use zorxto select On.
Then press eto highlight Bass boost level and using zorxadjust to suit your preference.
1
2
Bass boost enhances the depth of the sound on the TV
speakers. The difference will only be noticeable on sound
with a strong bass.
1
2
Press MENU and select the SOUND menu.
Use
fore
to highlight WOW then press OK.
3
4
5
Press eto highlight SRS 3D and using
zorx
select between On or Off.
Then press eto highlight FOCUS and press
zorx
to select between On or Off.
Highlight TruBass and use zorxto select Off,
Low or High to suit your preference.
NOTE: This feature is not available through
headphones.
1
2
Select the SOUND menu.
Use eto highlight Stable sound then press
zorx
to select On or Off.
Dual – analogue only
If a programme or film is being broadcast with a
soundtrack in more than one language, the DUAL feature
allows selection between them.
1
2
Select the SOUND menu.
Use eto highlight Dual then press zorxto choose between Dual 1 or Dual 2.
WOW, SRS and •symbol are trademarks of SRS Labs, Inc. WOW technology is incorporated under license from SRS Labs, Inc.
WOW
SRS 3D On
FOCUS Off
TruBass Off
MENU
Back
EXIT
Watch TV
When an active Super Woofer is connected to the Woofer Out connection on the back of the television, select AV
connection in the SET UP menu, press eto highlight Woofer and using zorxselect External. (See 'Input
Selection and AV Connections' section).
C3000D Eng Euro OM 28/1/07 8:09 pm Page 18
English
19
SUBTITLE
When subtitles are included on a
letterbox format broadcast, this setting
will raise the picture to ensure that all
the text is displayed.
SUBTITLE
Widescreen viewing
SUPER LIVE 1
This setting will enlarge a 4:3 image to
fit the screen by stretching the image
horizontally and vertically, holding
better proportions at the centre of the
image. Some distortion may occur.
Depending on the type of broadcast being transmitted, programmes can be viewed in a number of formats. Press the
{
button repeatedly to select between PC, Exact scan, Wide, Super Live 2, Cinema 2, 4:3,
Super Live 1, Cinema 1, Subtitle and 14:9.
SUPER LIVE 2
If a ‘side panel format’ signal is being
received this setting will enlarge the image to fit the screen by stretching
the image horizontally and vertically,
holding better proportions at the
centre of the image. Some distortion
may occur.
CINEMA 1
When watching ‘letterbox format’
films/video tapes, this setting will
eliminate or reduce the black bars at
the top and bottom of the screen by zooming in and selecting the image
without distortion.
CINEMA 2
When watching ‘all sides panel format’
films/video tapes, this setting will
eliminate or reduce the black bars at all
sides of the screen by zooming in and selecting the image without distortion.
C3000D Eng Euro OM 28/1/07 8:09 pm Page 19
English
20
PC
Exact Scan
Wide
Super Live 2
Cinema 2
4:3
Super Live 1
Cinema 1
Subtitle
14:9
Widescreen viewing
continued
Use this setting when watching a
widescreen DVD, widescreen video
tape or a 16:9 broadcast
(when available). Due to the range of
widescreen formats (16:9, 14:9,
20:9 etc.) black bars may be visible
on the top and bottom of the screen.
WIDE
When using a PC connected via
HDMI this setting will show the picture
without over scan, i.e. WYSIWYG.
PC
Use this setting to view a true 4:3
broadcast.
4:3
Using the special functions to change the size of the displayed image (i.e. changing the height/width ratio) for the purposes of public display or commercial gain may infringe on copyright laws.
Press the {button and a list of all the widescreen formats will appear on screen. Use fand eto highlight the required format and OK to select.
When a PC is connected via HDMI it will be selectable in the widescreen format list.
Use this setting when watching a
1080 source, it will display the image
as transmitted without scaling or
cropping the picture.
EXACT SCAN
This option is only available when watching a 1080 source.
FULL HD MODELS
14:9
Use this setting when watching a 14:9
broadcast.
C3000D Eng Euro OM 28/1/07 8:09 pm Page 20
English
21
PICTURE
Picture settings
OK
3D Colour management
Off
Base colour adjustment
Active Backlight Control
On
Cinema mode
On
MENU
Back
EXIT
Watch TV
2/2
Picture controls
To return to the original factory settings select Reset in the Picture position menu and press OK.
Picture position – analogue only
The picture position may be adjusted to suit personal
preference and can be particularly useful for
external inputs.
In the SET UP menu press
e
until
Picture position is highlighted.
1
Press OK to view the options available for the picture format that has been selected.
Press fand eto select an option, then zor
x
to adjust the settings.
The options alter depending on the widescreen format chosen and when viewing connected equipment.
In Cinema 2:
2
3
In the Picture settings menu press eto select Backlight.
Press zorxto adjust.
2
3
In the PICTURE menu press eto select Picture settings, then press OK.
1
Adjusting the Backlight can improve the clarity of the
screen when viewing.
Backlight
Picture position
Horizontal position 0
Vertical position 0
Reset
OK
MENU
Back
EXIT
Watch TV
Picture settings
Backlight 100
Contrast 100
Brightness 50
Colour 50
Tint 0
Sharpness 0
MENU
Back
EXIT
Watch TV
1/2
SET UP
Picture position
OK
Quick Setup
OK
MENU
Back
EXIT
Watch TV
Most of the picture controls and functions are available in both digital and analogue modes. To access the required menus when in digital mode: press MENU and using
eselect TV setup, press OK then
zorx
to select the desired menu. PLEASE NOTE: features not available in digital mode will be greyed out. To access the required menus when in analogue mode: press MENU and use
zorx
to select the desired menu.
C3000D Eng Euro OM 28/1/07 8:09 pm Page 21
English
22
Picture controls continued
DNR enables you to ‘soften’ the screen representation of a
weak signal to reduce the noise effect.
DNR – Digital Noise Reduction
Select DNR from the Picture settings menu.
1
Use zorxto adjust. The differences may not always be noticeable (for the best result use lower settings as picture quality can be lost if the setting is too high).
2
When watching a DVD the compression may cause some
words or picture elements to become distorted or pixelated.
Using the MPEG NR feature reduces this effect by
smoothing out the edges.
MPEG NR – Noise Reduction
Select MPEG NR from the Picture settings menu.
1
Use zorxto select a setting to suit your preference.
2
Black Stretch increases the strength of dark areas of the
picture which improves the definition.
Black stretch
Press zorxto select between On and Off. The effect depends on the broadcast and is most noticeable on dark colours.
1
2
Picture settings
Black stretch On
MPEG NR Low
DNR Auto.
Colour Temperature Cool
MENU
Back
EXIT
Watch TV
2/2
In the Picture settings menu press euntil Black Stretch is highlighted.
Picture settings
Black stretch On
MPEG NR Low
DNR Auto.
Colour Temperature Cool
MENU
Back
EXIT
Watch TV
2/2
Picture settings
Black stretch On
MPEG NR Low
DNR Auto.
Colour Temperature Cool
MENU
Back
EXIT
Watch TV
2/2
This television offers the choice of personalising the picture
style. Press mto view the different styles available:
Picture mode-1 to 3 are preset options and effect many
features/settings within the television, Picture mode-M
stores your own settings as detailed below:
Use
zorx
to adjust the Contrast, Brightness,
Colour, Tint and Sharpness.
Picture preferences
2
Select Picture settings from the PICTURE menu.
1
Picture settings
Backlight 100
Contrast 100
Brightness 50
Colour 50
Tint 0
Sharpness 0
MENU
Back
EXIT
Watch TV
1/2
C3000D Eng Euro OM 28/1/07 8:09 pm Page 22
English
23
Base colour adjustment
Hue Saturation Brightness
Red +2 +6 +4
Green 0 0 0
Blue 0 0 0
Yellow 0 0 0
Magenta 0 0 0
Cyan 0 0 0
Reset
OK
MENU
Back
EXIT
Watch TV
PICTURE
Picture settings
OK
3D Colour management
On
Base colour adjustment
OK
Active Backlight Control
On
Cinema mode
On
MENU
Back
EXIT
Watch TV
Picture controls continued
Press fand eto select an option, then xto adjust the settings.
2
In the PICTURE menu press eto select Base colour adjustment, then press OK.
1
The Base colour adjustment feature allows the
adjustment of individual colours to suit personal
preference. This can be useful when using an
external source.
Base colour adjustment
When 3D Colour management is selected it allows the
‘Base colour adjustment’ feature to become available.
3D Colour management
In the PICTURE menu press eto select 3D Colour management.
Press
zorx
to select On or Off.
1
2
To return to the original factory settings select Reset and press OK.
PICTURE
Picture settings
OK
3D Colour management
On
Base colour adjustment
OK
Active Backlight Control
On
Cinema mode
On
MENU
Back
EXIT
Watch TV
In the Picture settings menu press euntil Colour Temperature is highlighted.
Press
zorx
to select between Normal, Warm
and Cool to suit your preference.
1
2
Colour Temperature increases the ‘warmth’ or ‘coolness’
of a picture by increasing the red or blue tint.
Colour temperature
Picture settings
Black stretch On
MPEG NR Low
DNR Auto.
Colour Temperature Cool
MENU
Back
EXIT
Watch TV
2/2
C3000D Eng Euro OM 28/1/07 8:09 pm Page 23
English
24
Picture controls continued
1/2
SET UP
Language English
Country UK
Auto tuning
OK
Manual tuning
OK
Antenna Amplifier On
AV connection
OK
MENU
Back
EXIT
Watch TV
In the PICTURE menu press eto select Cinema mode.
1
Press zorxto select On or Off.
NOTE: When a DVD with subtitles is being played
this mode may not work correctly.
2
If there are lines or jagged edges in the film or programme
being viewed, selecting Cinema mode can help correct
this by smoothing out the picture.
Cinema mode
If the signal being received by the television is too strong,
this may result in picture interference and/or a buzzing sound. Setting Antenna Amplifier to Off reduces the
signal strength, and can help to remove the interference.
In the SET UP menu press euntil Antenna Amplifier is highlighted.
With zor xselect either On or Off.
Antenna amplifier
1
2
When Active Backlight Control is activated it will
automatically optimise the backlighting levels for
dark scenes.
Active Backlight Control
In the PICTURE menu press eto select Active Backlight Control.
Press
zorx
to select On or Off.
1
2
PICTURE
Picture settings
OK
3D Colour management
Off
Base colour adjustment
Active Backlight Control
On
Cinema mode
On
MENU
Back
EXIT
Watch TV
PICTURE
Picture settings
OK
3D Colour management
Off
Base colour adjustment
Active Backlight Control
On
Cinema mode
On
MENU
Back
EXIT
Watch TV
FUNCTION
Tel etext Auto.
Panel lock Off
Auto format On
4:3 stretch Off
Blue screen On
Side panel 1
MENU
Back
EXIT
Watch TV
Automatic format (Widescreen)
When this television receives a true Widescreen picture and
Auto format is On, it will automatically be displayed in
Widescreen format, irrespective of the
television’s previous setting.
Press MENU and zorxto select the FUNCTION menu.
1
Press eto highlight Auto format, then zor
x
to select On or Off.
2
C3000D Eng Euro OM 28/1/07 8:09 pm Page 24
English
25
FUNCTION
Tel etext Auto.
Panel lock On
Auto format On
4:3 stretch Off
Blue screen On
Side panel 1
MENU
Back
EXIT
Watch TV
FUNCTION
Tel etext Auto.
Panel lock Off
Auto format On
4:3 stretch On
Blue screen On
Side panel 1
MENU
Back
EXIT
Watch TV
FUNCTION
Tel etext Auto.
Panel lock Off
Auto format On
4:3 stretch Off
Blue screen On
Side panel 1
MENU
Back
EXIT
Watch TV
From the FUNCTION menu select Panel lock and choose On or Off usingzorx.
Panel lock disables the buttons on the television. All
buttons on the remote control can still be used.
Panel lock
1
When Panel lock is On, a reminder will appear when the buttons on the television are pressed. If the standby
button is pressed the television will switch off and can only be brought out of standby by using the remote control.
The Side panel feature lightens or darkens the band each
side of the screen when in 4:3 or 14:9 format. This helps
prevent image retention of the band and can also make
viewing in bright or dark conditions more comfortable.
Picture controls
continued,
panel lock
4:3 stretch
When 4:3 stretch is activated the size switching system
changes 4:3 programs into a full screen picture.
2
1
In the FUNCTION menu press euntil Side panel is highlighted.
Press zorxto adjust.
1
2
Side panel adjustment
In the FUNCTION menu press eto highlight 4:3 stretch.
Press
zorx
to select On or Off.
This feature is used to hold a still image on the screen.
Press
uto hold an image on the screen, press u
again to cancel.
1
Picture still
Blue screen
When Blue screen is selected the screen will turn blue and
the sound will be muted when no signal is received.
2
1
In the FUNCTION menu press eto highlight Blue screen.
Press
zorx
to select On or Off.
C3000D Eng Euro OM 28/1/07 8:09 pm Page 25
English
26
The timers
Press eto select the Sleep timer. Use the number buttons to set the required time. For example, to switch the television off in one and a half hours enter 01:30, or press zorxto increase/decrease in steps of 10 minutes.
Press EXIT to finish.
This feature will set the television to go to a specific
channel at a certain time. It can be used to view a
particular programme, or by setting the mode to daily or
weekly, can be used to view a series of programmes.
Programme timer – digital only
2
3
The television can be set to turn itself off after a
certain time.
Sleep timer
1
Press MENU and zorxto select the TIMER menu.
TIMER
Sleep timer 01:30
MENU
Back
EXIT
Watch TV
Press eto select Programme Timers, then press OK to select.
Press eto select the first programme to be timed, then press OK. The SET TIMER menu will now appear on screen.
Press fand eto go through the list adding the details of the programme to be timed by using the number buttons and zandxto make selections.
2
3
4
When all the details have been entered press OK to save the timer.
Auto-start VCR: If your Toshiba media recorder is AV link compatible setting this feature to YES will auto start/stop a recording.
PLEASE NOTE: When a timed programme is about to start, an information screen will appear offering the option of watching or cancelling the programme. The menus and other channels will not be available during the timed programme unless the programme timer is cancelled.
5
1
Press MENU and zorxto select the TIMER MENU.
TIMER MENU
Programme Timers OK
MENU
Back
EXIT
Watch TV
SET TIMER
Programme Channel 4 1
Date Mon, 11 Dec 2006 11/12
Start Time 12:00
End Time 12.30
Repeat ONCE
Auto-start VCR NO
Subtitles NONE
Audio Language ENGLISH
0 - 9 Enter Number Save Timer MENU Cancel
11:36 Mon, 11 Dec
C3000D Eng Euro OM 28/1/07 8:09 pm Page 26
English
27
Digital on-screen information and
Programme Guide
When viewing in digital mode, the on-screen information and programme guide give access to programme details for all available channels.
The details of the programme will have been added to the screen. Press OK to save.
5
Information
Select information by pressing , the information screen will appear giving details of the channel and programme currently being viewed.
1
11:36 Mon, 11 Dec
11:30 King of the Hillx12:00 News at Noon
24 minutes left
I/II
ENTERTAINMENT
That’s What She Said: Hank in uncomfortable with his new colleague’s innuendo, and Dale tries to give up smoking. [S]
Showing also ITV Playalong: Izi starting in 4 minutes on ITV Play…
Guide
Select the on-screen guide by pressing GUIDE, the guide screen will appear highlighting details of the channel and programme currently being viewed. This may take a few moments to appear.
1
Press zorxfor information of other programmes scheduled for the channel selected.
For details of other channels currently available, press
f
and eto scroll up and down the channel list. As the channel is selected details of the programme currently being broadcast will appear, then press
zorx
.
For information on a highlighted programme press . To set the timer for that programme press the BLUE button to bring up the
Programme timers menu.
NOTE: Recording can be set from both the
information screen and guide. In order for the recording operation to work the media recorder must be AV link compatible.
Press lyto move the Guide forward by 24 hours, press wl to go back. Pressing yor w
will move the Guide forwards or backwards a page at a time.
2
3
4
5
To see details of any of the other channels currently available, press fand eto scroll up and down the channel list. As the channel is selected details of the programme currently being broadcast will appear.
Pressing the YELLOW button will activate Showing also, giving details of programmes which have started on other channels.
To record the following programme, with the information guide showing, press x. The Tune option in the bottom section of the screen will change to Record, press OK. The SET TIMER screen will appear.
2
3
4
SET TIMER
Start Time 12:00
End Time 12:30
Repeat ONCE
Auto-start VCR NO
Subtitles NONE
Audio Language ENGLISH
0 - 9 Enter Number Save Timer MENU Cancel
11:36 Mon, 11 Dec
News at Noon
004 Channel 4 12:00-12:30 Mon, 11 Dec
i
+
i
+
Tune EXIT Watch TV TV/FAV Change progs Page Up Page Down Showing Also Languages
ALL PROGS
Channel 4
Five ITV2 BBC THREE BBC FOUR
11:36 Mon, 11 Dec
Page Up Page Down Timers
To Buy or Not to Buy
ALL PROGS
BBC ONE
BBC TWO ITV1 Channel 4 Five ITV2 BBC THREE BBC FOUR ITV3 SKY THREE UKTV History More 4
Watch More info EXIT Watch TV TV/FAV Change progs
i
+
Monday
z
11:00 11:30 12:00 12:30
x
To Buy or Not My Life For Sale Bargain Hunt
Schools: Schools: Tes Sch The Daily Po Working L
This Morning Vanessa’s
ER King of The H News at Noo Headland Trisha Godd Five News Home and A Brainteas
The Montel Will Judge Jud Coronation S Emmerda
This is BBC THREE This is BBC THREE This is BBC FOUR This is BBC FOUR
Faith Where the Heart is Rumpole of th
Tunisia, Egypt Animal Airpo Pop Years 2
The Re-Inventors Seven Wonders of the In
H Deal or No Deal Countdown Warof
C3000D Eng Euro OM 28/1/07 8:09 pm Page 27
English
28
Digital settings – parental control
In order to prevent viewing of unsuitable films and programmes, channels and menus can be locked. These can then only be accessed with a security code PIN when in digital mode.
PARENTAL CONTROL
Mode ON
Change Pin OK
MENU
Back
EXIT
Watch TV
PARENTAL CONTROL
Mode ON
Change PIN OK
MENU
Back
EXIT
Watch TV
This feature locks various menus to prevent the television
being retuned or the settings being overridden.
Setting the PIN
1
Press MENU and xto select the FEATURE MENU.
Mode
1
In the PARENTAL CONTROL menu press eto select Mode.
2
Use zor xto choose between ON, LOCK MENU, LOCK INSTALL and OFF.
When menus that have been locked are now selected they will only become available when the PIN is entered.
2
Use eto select Parental Control then press OK.
Press eto highlight Change Pin then press OK.
3
4
Using the number buttons enter a four digit number, when these have been entered the screen will ask you to confirm them by entering them again.
The PIN number is now set. To activate put the television into standby.
DEFINE PIN NUMBER
New PIN
* * * *
Confirm PIN – – – –
0 - 9 Enter PIN EXIT
Exit
FEATURE MENU
Parental Control OK
Favourite and Locked Programmes OK
Favourites ALL PROGS
Common Interface Slots
NO MODULE
Software Upgrade OK
MENU
Back
EXIT
Watch TV
C3000D Eng Euro OM 28/1/07 8:09 pm Page 28
English
29
Select MENU Back
Page Up Page Down Lock all Unlock all
FAVOURITE AND LOCKED PROGRAMMES
Prog. Type Name Fav-1 -2 -3 -4
1 BBC ONE
2 BBC TWO
3 ITV1
4 Channel 4
5 Five
6 ITV2
Select MENU Back
Page Up Page Down Select all Deselect all
FAVOURITE AND LOCKED PROGRAMMES
Prog. Type Name Fav-1 -2 -3 -4
1 BBC ONE
2 BBC TWO
3 ITV1
4 Channel 4
5 Five
6 ITV2
Digital settings – favourite programmes,
locked programmes, encrypted programmes
Locked Programmes stops the viewing of digital
channels, they can only be accessed by entering the PIN.
Locking programmes
1
From the FEATURE MENU press eto select Favourite and Locked Programmes.
Press xrepeatedly to select the Locked Programme list.
Use fand eto go through the list of channels pressing OK to select the ones required, a padlock will appear in the box.
2
3
Press EXIT and put the television into standby.
When the television is switched back on and any of the channels in the Locked Programme list are selected the PIN must be entered before they can be accessed.
4
5
Selecting Encrypted Programmes allows all encrypted
programmes to be shown in the programme list even if
they are not available to select.
Encrypted programmes
1
In the FEATURE MENU press for eto select Encrypted Programmes.
Use zorxto select ON or OFF.
NOTE: CAMs (Conditional Access Modules) are
available from service providers (see 'Common Interface' section)
2
Favourite Programmes creates a list of the digital
channels that are watched most. Four lists can be created,
these can be a mixture of television, text and radio channels.
Selecting favourite programmes
1
From the FEATURE MENU press eto select Favourite and Locked Programmes.
2
3
4
Use fand eto go through the list of channels pressing OK to select the ones required, a tick will appear in the box.
Press xto select List 2. Follow the same procedure to make the selection. When all favourites have been selected press MENU to return to the FEATURE menu.
Use
e
to highlight Favourites and zor xto select between ALL, TV, RADIO, FAV-1 and FAV-2. The number of favourites available depends on how many lists have been created.
2
Press EXIT.
Using the P P Q buttons will now only access those channels in Favourite List 1 when FAV-1 is selected.
5
FEATURE MENU
Parental Control OK
Favourite and Locked Programmes OK
Favourites FAV-1
Common Interface Slots
NO MODULE
Software Upgrade OK
MENU
Back
EXIT
Watch TV
C3000D Eng Euro OM 28/1/07 8:09 pm Page 29
English
30
LOCAL OPTIONS
Country UK
Local Options ENGLISH
Audio Language ENGLISH
Audio Output PCM
Subtitles OFF
Local Time Settings 11:19
MENU
Back
EXIT
Watch TV
Digital settings continued – audio languages,
audio output, subtitles, reset tv,
common interface
This feature allows a programme or film to be viewed with
a choice of soundtrack language, provided they are
currently being broadcast.
Audio languages
1
In the SETUP MENU press eto select Local Options.
Press OK, then press for eto highlight Audio Language.
This feature will show subtitles on the bottom of the
screen in the selected language provided they are being
broadcast.
Subtitles
1
2
In the LOCAL OPTIONS menu press eto select Subtitles.
Use zor xto select an option.
When connecting a surround sound amplifier to the digital
audio output (Sony/Philips Digital Interface Format
[S/PDIF]), the following options can be selected.
PCM: this mode outputs PCM format to the digital
audio output socket.
BITSTREAM: this mode outputs audio format (eg. Dolby
Digital) to the digital audio output socket providing it is
being broadcast. It will automatically mute the speakers.
Audio output
1
2
In the LOCAL OPTIONS menu press eto select Audio output.
Use zor xto select PCM or Bitstream.
2
3
Use zor xto select an option.
NOTE: If more than one soundtrack is available, use
OI/II to select between them.
The Common Interface Slot, situated on the back of the
television, enables the insertion of a CAM (Conditional Access Module) and card. These are purchased from a
service provider and allow additional subscription
broadcasts to be viewed. For information see a
service provider.
Common interface
1
2
Insert the CAM and card into the Common Interface Slot, following the instructions provided with the CAM. A box will appear on screen to confirm that the CAM is loaded.
In the FEATURE MENU press for eto select Common Interface Slots.
Details of the CAM should now be available. Use OK to select it. If two CAMs are inserted use
z
or xto select between the two.
3
In the SETUP MENU press euntil Reset TV is highlighted.
Press OK to select. A screen will appear warning that all digital settings will be lost, press OK to continue.
The Welcome screen will appear, press OK to continue, the television will then auto tune.
1
2
Selecting Reset TV will delete all stored digital channels
and settings. The television will return to factory settings
and then auto tune.
Reset TV
C3000D Eng Euro OM 28/1/07 8:09 pm Page 30
Loading...
+ 198 hidden pages