Page 1
Toshiba
Welcome to
your TV
Connecting
Using the
Remote Control
© 2003 TOSHIBA CORPORATION
All Rights Reserved.
Color Television
32AF13
Owner’s Manual
®
R
E
M
A
A
B
I
H
S
O
T
I
S
O
1
N
O
C
A
C
I
4
0
0
1
F
I
23565970
your TV
Setting up
Features
Using the TV’s
Appendix
S
U
M
E
R
P
R
O
D
U
C
T
S
,
I
N
C
.
5
4
6
9
A
.
o
N
E
L
Page 2
Dear Customer,
Thank you for purchasing this Toshiba TV. This manual will
help you use the many exciting features of your new TV.
Before operating the TV, please read this manual
completely, and keep it nearby for future reference.
Child Safety
It Makes A Difference
Where Your TV Stands
Safety Precautions
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
WARNING: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning symbol in the triangle tells you that the
voltage inside this product may be strong enough to
cause an electric shock. DO NOT TRY TO SERVICE
THIS PRODUCT YOURSELF.
The exclamation mark in the triangle tells you that
important operating and maintenance instructions
follow this symbol.
NOTE TO CATV INSTALLERS IN THE USA
This is a reminder to call the CATV system installer’s
attention to Article 820-40 of the NEC, which provides
guidelines for proper grounding and, in particular, specifies
that the cable ground shall be connected to the grounding
system of the building, as close to the point of cable entry
as practical. For additional antenna grounding information,
see items 25 and 26 on page 4.
NOTICE OF POSSIBLE TV STAND INSTABILITY
DANGER: RISK OF SERIOUS PERSONAL
INJURY OR DEATH!
the TOSHIBA TV stand recommended in the
“Specifications” section only.
result in instability, causing possible injury or death.
NOTICE OF POSSIBLE ADVERSE EFFECTS
ON TV PICTURE TUBE
If a fixed (non-moving) pattern remains on the TV
screen for long periods of time, the image can become
permanently engrained in the picture tube. This type of
damage is NOT COVERED BY YOUR WARRANTY.
See item 33 on page 4.
Use this TV with
Use with other stands may
Congratulations on your purchase! As you enjoy
your new TV, keep these safety tips in mind:
The Issue
If you are like most consumers, you have a TV in your home.
Many homes, in fact, have more than one TV.
The home theater entertainment experience is a growing
trend, and larger TVs are popular purchases; however, they
are not always supported on the proper TV stands.
Sometimes TVs are improperly secured or inappropriately
situated on dressers, bookcases, shelves, desks, audio
speakers, chests, or carts. As a result, TVs may fall over,
causing unnecessary injury.
Toshiba Cares!
The consumer electronics industry
is committed to making home
entertainment enjoyable and safe.
The Consumer Electronics
Association formed the Home
Entertainment Support Safety
Committee, comprised of TV and
consumer electronics furniture
manufacturers, to advocate
children’s safety and educate
consumers and their families about
television safety.
Tune Into Safety
One size does NOT fit all! Use appropriate
furniture large enough to support the weight of your
TV (and other electronic components).
Use appropriate angle braces, straps, and anchors to secure
your furniture to the wall (but never screw anything directly
into the TV).
Carefully read and understand the other enclosed
instructions for proper use of this product.
Do not allow children to climb on or play with furniture
and TVs.
Avoid placing any item on top of your TV (such as a VCR,
remote control, or toy) that a curious child may reach for.
Remember that children can become excited while watching
a program and can potentially push or pull a TV over.
Share our safety message about this hidden hazard of
home with your family and friends. Thank you!
2500 Wilson Blvd.
Arlington, VA 22201 U.S.A.
Tel. 703-907-7600 Fax 703-907-7690
www.CE.org
CEA is the Sponsor, Producer and
0303
2
Manager of the International CES
the
®
Page 3
Important Safety Instructions
QUALIFIED
SERVICE
TECHNICIAN
Installation, Care, and Service
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near
water.
6) Clean only with a dry cloth.
7) Do not block any ventilation
openings. Install in accordance with
the manufacturer’s instructions.
8) Do not install near any heat
sources such as radiators,
heat registers, stoves, or other
apparatus (including amplifiers)
that produce heat.
9) Do not defeat the safety purpose of the polarized or
grounding type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has
two blades and a third grounding
prong. The wide blade or the third
prong are provided for your safety.
If the provided plug does not fit into
your outlet, consult an electrician
for replacement of the obsolete outlet.
Wide plug
Installation
Follow these recommendations and precautions and heed all
warnings when installing your TV:
16) Never modify this equipment. Changes or modifications
may void: a) the warranty, and b) the user’s authority to
operate this equipment under the rules of the Federal
Communications Commission.
17) DANGER: RISK OF SERIOUS PERSONAL
INJURY, DEATH, OR EQUIPMENT
DAMAGE! Never place the TV on
an unstable cart, stand, or table. The TV
may fall, causing serious personal injury,
death, or serious damage to the TV.
18) Never place or store the TV in direct
sunlight; hot, humid areas; areas
subject to excessive dust or vibration;
or locations with temperatures at or
below 41°F (5°C).
19) Always place the TV on the floor
or a sturdy, level, stable surface that
can support the weight of the unit.
10) Protect the power cord from being
walked on or pinched, particularly at
plugs, convenience receptacles, and
the point where it exits the apparatus.
11) Only use attachments/accessories specified by the
manufacturer.
12) Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13) Unplug this apparatus during
lightning storms or when
unused for long periods
of time.
14) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power supply
cord or plug is damaged, liquid has
been spilled or objects have fallen into
the apparatus, the apparatus has been
exposed to rain or moisture, does not
operate normally, or has been dropped.
15) CAUTION: To reduce the risk of electric shock, do not
use the polarized plug with an extension cord, receptacle,
or other outlet unless the blades can be inserted
completely to prevent blade exposure.
20) Never place items such as vases,
aquariums, or candles on top of the TV.
21) Never block or cover the slots or
openings in the TV cabinet back,
bottom, and sides. Never place
the TV:
• on a bed, sofa, rug, or similar
surface;
• too close to drapes, curtains,
or walls; or
• in a confined space such as a
bookcase, built-in cabinet, or any
other place with poor ventilation.
The slots and openings are provided
to protect the TV from overheating
and to help maintain reliable
operation of the TV.
22) Never allow anything to rest on or roll over the power
cord, and never place the TV where the power cord is
subject to wear or abuse.
23) Never overload wall outlets and
extension cords.
0303
3
Page 4
Ground clamp
Antenna discharge unit
(NEC Section 810-20)
Grounding conductors
(NEC Section 810-21)
Power service grounding
electrode system (NEC Art 250 Part H)
Ground clamps
Antenna lead-in wire
Electric service equipment
QUALIFIED
SERVICE
TECHNICIAN
24) Always operate this equipment from
a 120 VAC, 60 Hz power source only.
30) [This item applies to projection TVs only.] If the air
temperature rises suddenly (for example, when the TV is
first delivered), condensation may form on the lenses. This
can make the picture appear distorted or the color appear
faded. If this happens, turn off the TV for 6 to 7 hours to
allow the condensation to evaporate.
25) Always make sure the antenna system is properly
grounded to provide adequate protection against voltage
surges and built-up static charges (see Section 810 of the
National Electric Code).
26) DANGER: RISK OF SERIOUS PERSONAL
INJURY OR DEATH!
• Use extreme care to make sure you are never in
a position where your body (or any item you are in contact
with, such as a ladder or screwdriver) can accidentally
touch overhead power lines. Never locate the antenna
near overhead power lines or other electrical circuits.
• Never attempt to install any of the following during
lightning activity:
a) an antenna system; or b) cables, wires, or any home
theater component connected to an antenna or phone
system.
31)For added protection of your TV from lightning and power
surges, always unplug the power cord and disconnect the
antenna from the TV if you leave the TV unattended or
unused for long periods of time.
32) During normal use, the TV may make
occasional snapping or popping
sounds. This is normal, especially
when the unit is being turned on or
off. If these sounds become frequent
or continuous, unplug the power cord
and contact a Toshiba Authorized Service Center.
33) Possible Adverse Effects on TV Picture Tube: If a fixed
(non-moving) pattern remains on the TV screen for long
periods of time, the image can become permanently
engrained in the picture tube and cause subtle but
permanent ghost images. This type of damage is NOT
COVERED BY YOUR WARRANTY. Never leave your TV
on for long periods of time while it is displaying the
following formats or images:
• Fixed Images, such as PIP/POP windows, stock tickers,
video game patterns, TV station logos, and websites.
• Special Formats that do not use the entire screen. For
example, viewing letterbox style (16:9) media on a
normal (4:3) display (gray bars at top and bottom of
screen); or viewing normal style (4:3) media on a
widescreen (16:9) display (gray bars on left and right
sides of screen).
Care
For better performance and safer operation of your TOSHIBA
TV, follow these recommendations and precautions:
27) Always sit approximately 10–25 feet away from the TV and
as directly in front of it as possible. The picture can appear
dull if you sit too far to the left or right of the TV, or if
sunlight or room lights reflect on the screen. Turn the TV
off to check for reflections on the screen, and then remove
the source of reflections while viewing the TV.
28) Always unplug the TV before
cleaning. Never use liquid or
aerosol cleaners.
29) WARNING: RISK OF ELECTRIC SHOCK!
Never spill liquids or push objects of any kind
into the TV cabinet slots.
Service
34) WARNING: RISK OF ELECTRIC
SHOCK! Never attempt to service the
TV yourself. Opening and
removing the covers may expose
you to dangerous voltage or other
hazards. Refer all servicing to a
Toshiba Authorized Service Center.
35) If you have the TV serviced:
• Ask the service technician to use only replacement parts
specified by the manufacturer.
• Upon completion of service, ask
the service technician to perform
routine safety checks to determine
that the TV is in safe operating
condition.
36)When the TV reaches the end of its useful life, ask a
qualified service technician to properly dispose of the TV.
Improper disposal may result in a picture tube implosion
and possible personal injury.
0303
4
Page 5
Important Safety Information........................2–4
Welcome to Toshiba ............................................ 6
Exploring your new TV .............................................6
Selecting a location for the TV................................... 6
Connecting your TV ............................................. 7
Note regarding picture quality ...................................7
Connecting a VCR ....................................................7
Connecting a cable converter box .............................. 8
Connecting a cable converter box and VCR............... 8
Connecting a DVD player or satellite receiver
and a VCR................................................................. 9
Connecting a DVD player with component video
and a VCR............................................................... 10
Connecting two VCRs ............................................. 10
Connecting a camcorder ..........................................11
Connecting an audio amplifier................................. 11
Using the remote control ................................. 12
Preparing the remote control for use ........................ 12
Installing the remote control batteries ......................12
Using the remote control to operate a VCR or cable
TV converter ........................................................... 12
Programming the remote control .............................13
VCR code table...................................................13
Cable TV converter code table ............................14
Learning about the remote control ...........................15
Setting up your TV ............................................. 16
Changing the on-screen display language .................16
Selecting the signal source ........................................17
Programming channels into the TV’s memory .........17
Programming channels automatically ..................17
Adding and erasing channels manually................ 18
Changing channels................................................... 18
Image tilt correction.................................................18
If you forget your PIN code ..............................21
Blocking programs by ratings ..............................22
Ratings definitions (MPAA, Youth TV, TV) ........22
Unblocking programs temporarily ...................... 23
Blocking unrated movies and programs...............23
Blocking channels ...............................................24
Locking video inputs ...............................................25
Channel labels ......................................................... 26
Video labels ............................................................. 27
Adjusting the picture ............................................... 28
Adjusting the picture quality ...............................28
Selecting the color temperature ...........................28
Adjusting the picture preference.......................... 29
Displaying on-screen information ............................29
Setting the off timer .................................................29
Auto power off......................................................... 29
Using the closed caption feature............................... 30
Adjusting the sound .................................................31
Muting the sound ...............................................31
Selecting stereo/SAP broadcasts ..........................31
Adjusting the sound quality ................................32
Using the surround sound feature .......................32
Selecting variable audio OUT .............................33
Turning off the built-in speakers .........................33
Using the sub-bass system (SBS) .........................34
Viewing the demonstration (DEMO) mode ............ 34
Understanding the last mode memory feature ..........34
Appendix.............................................................. 35
Tr oubleshooting .......................................................35
Specifications ...........................................................36
Limited United States warranty................................37
Limited Canada warranty ........................................38
Using the TV’s features..................................... 19
Adjusting the channel settings.................................. 19
Switching between two channels ..............................19
Programming your favorite channels ........................19
Using the V-Chip Control (blocking) feature ...........20
Selecting a PIN code ...........................................20
Changing your PIN code ....................................21
5
Page 6
Toshiba
Welcome to
Welcome to Toshiba
Congratulations! You have purchased one of the finest color TVs on
the market. The goal of this manual is to guide you through setting
up and operating your Toshiba TV as quickly as possible.
Menu navigation instructions in this manual are based on using the
remote control.
You may need to purchase other audio or video cables to connect
your equipment. See “Connecting your TV” on page 7 for more
information.
Please read all safety and operating instructions carefully before
you proceed.
Exploring your new TV
You can operate your TV using the buttons on the front panel or the
remote control. The front and back panels provide all the terminal
connections you will need to connect other equipment to your TV.
Front
36AF61
DEMO MENU TV/VIDEO VOLUME CHANNEL
VIDEO
R
L/MONO
AUDIO
VIDEO-3 IN
Volume Channel
Volume
Demo
TV/Video
Demo
TV/Video
DEMO MENU TV/VIDEO VOLUME CHANNEL
VIDEO
POWER
(behind door)
(behind door)
L/MONO
AUDIO
VIDEO-3 IN
Video 3
Video 3
R
Menu
Menu
Channel
Power
POWER
POWER
Remote
Remote Sensor
Control
Sensor
RECALL MUTE
o
1
4
7
100
CH
MENU/
VOL VOL
ENTER
CH
TV
CABLE
VCR
EXIT
TV/VCR
REC
SLOW
PIP CH LOCATE SWAP
CT-90037
POWER
3
2
6
5
8
9
CH RTN
0
ENT
TV/VIDEOFAV CH
A
PLAY
STOP
PIP
SOURCESTILL
REWPAUSE
FF
ANT (75Ω)
Rear
ANT-1
OUT
VIDEO
L/MONO
AUDIO
ANT (75Ω)
ANT-1
IN
OUT
DVD IN
S-VIDEO
COLOR
STREAM
Y
INPUT
VIDEO
VIDEO
Pb
L/MONO
L/MONO
L
AUDIO
AUDIO
AUDIO
Pr
R
R
R
VIDEO 1VIDEO 2
R
ColorStream
(component video)
L
AUDIO
R
DVD IN
COLOR
STREAM
INPUT
Y
Pb
Pr
Video 2
IN
VIDEO 1VIDEO 2
Video 1
S-VIDEO
VIDEO
L/MONO
AUDIO
R
Selecting a location for the TV
• Place the TV on the floor or on the TV stand listed in the “Specifications” section.
• Place the TV in a location where light does not directly hit the screen.
• Place the TV far enough from the walls to allow proper ventilation. Inadequate ventilation
may cause overheating, which may damage the TV.
The model serial number is on the back of your TV. Record the number in the space below. Refer to
these model numbers whenever you communicate with your Toshiba dealer about this TV.
Model number: ________________________
Serial number: ________________________
6
Page 7
Connecting your TV
Note: Cables are not supplied with your TV.
Coaxial cable is the cable that comes in from your antenna, cable TV service,
or cable converter box. Coaxial cable uses “F” connectors.
Standard A/V (audio/video) cables usually come in sets of three, and are
typically color-coded according to use: yellow for video, red for stereo right audio,
and white for stereo left (or mono) audio. On your TV’s back panel, the standard
A/V inputs are color-coded in the same manner as the cables.
S-Video cable is for use with video equipment with an S-Video connection.
Component video cables come in sets of three, and are for use with video
equipment with component video connections. (ColorStream
of component video.)
NOTE REGARDING PICTURE QUALITY
When connecting video equipment to your Toshiba TV:
For GOOD picture quality: Use a standard yellow video cable.
For BETTER picture quality: If your equipment has S-video, use an S-video
cable instead of a standard yellow video cable. (You still must connect the
standard red and white audio cables for full system connection, but do not
connect the standard yellow video cable at the same time, or the picture
performance will be unacceptable.)
For BEST picture quality: If your equipment has component video, use
component video cables instead of a standard video or S-video cable. (You
still must connect the standard red and white audio cables for full system
connection.)
®
is Toshiba’s brand
CAUTION: Do not plug in any power cords
until you have finished connecting all equipment.
Toshiba
Welcome to
Coaxial (antenna) cable
Standard A/V cables (red/white/yellow)
your TV
Connecting
S-video cable
Component video cables
Using the
Remote Control
Connecting a VCR
This connection allows you to watch local channels and video programs, play or record on the VCR while watching TV, and record
from one channel while watching another channel.
You will need:
• two coaxial cables
• one set of standard A/V cables
TV
Stereo VCR
From Cable or Antenna
ANT (75Ω)
ANT-1
OUT
VIDEO
L/MONO
AUDIO
R
VIDEO AUDIO
DVD IN
COLOR
STREAM
INPUT
L
AUDIO
R
LR
IN
S-VIDEO
Y
Pb
Pr
IN
IN from ANT
OUT
VIDEO 1VIDEO 2
VIDEO
L/MONO
AUDIO
R
OUT to TV
CH 3
CH 4
Note:
If you have a mono VCR, connect L/Mono to
VCR Audio OUT using only one audio cable.
If you have a VCR with S-video, use an
S-video cable instead of a standard video
cable.
Do not connect a standard video cable and an
S-video cable to Video-1 (or Video-2) at the
same time or the picture performance will be
unacceptable.
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States
and other countries, and may subject
you to civil and criminal liability.
your TV
Setting up
Features
Using the TV’s
Appendix
7
Page 8
Connecting a cable converter box
This connection allows you to watch basic and premium cable
channels. To view premium channels, tune the TV to channel 3 or 4
(whichever channel is vacant in your area), and use the converter box
to change channels.
You will need:
your TV
Connecting
• two coaxial cables cables
TV
ANT (75Ω)
ANT-1
OUT
VIDEO
L/MONO
AUDIO
R
L
AUDIO
R
COLOR
STREAM
INPUT
DVD IN
Note:
When you use a converter box with your TV,
the remote control may not operate certain
features, such as channel y z, channel
block, favorite channels, or channel labels.
From Cable
IN
OUT
IN
S-VIDEO
Y
Pb
Pr
VIDEO
L/MONO
AUDIO
R
VIDEO 1VIDEO 2
Cable Converter Box
Connecting a cable converter box and VCR
This connection allows you to watch and record basic and premium
cable channels, as well as watch videotapes. Set the TV signal source
to VIDEO 1 (see “Selecting the signal source” on page 17); tune the
VCR to channel 3 or 4 (the same channel as the converter box output
switch); and use the cable converter box to change channels.
You will need:
• three coaxial cables
• one set of standard A/V cables
TV
ANT (75Ω)
Stereo VCR
OUT
VIDEO
L/MONO
AUDIO
R
VIDEO AUDIO
ANT-1
DVD IN
COLOR
STREAM
INPUT
L
AUDIO
R
LR
Y
Pb
Pr
IN
OUT
IN from ANT
IN
VIDEO 1VIDEO 2
S-VIDEO
VIDEO
L/MONO
AUDIO
R
OUT to TV
CH 3
CH 4
From Cable
IN
OUT
Cable
Converter Box
Note:
When you use a converter box with your
TV, the remote control may not operate
certain features, such as channel y z,
channel block, favorite channels, or
channel labels.
If you have a mono VCR, connect
L/Mono on the TV to Audio OUT on the
VCR using only one audio cable.
If you have a VCR with S-video, use an
S-video cable instead of a standard video
cable. Do not connect a standard video
cable and an S-video cable to Video-1
(or Video-2) at the same time or the
picture performance will be
unacceptable.
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States and
other countries, and may subject you to
civil and criminal liability.
8
Page 9
Connecting a DVD player or satellite receiver
and a VCR
This connection allows you to watch DVD/satellite, VCR, or TV
programs, and record from the satellite receiver or TV. You can record
one TV program while watching another TV program.
Note: If your DVD player has component video connections, follow the
connection instructions under “Connecting a DVD player with component video
and a VCR” on page 10.
Toshiba
Welcome to
You will need:
• two (or three, if satellite receiver is used) coaxial cables
• one S-video cable (see notes at right)
• one pair of audio cables
• two sets of standard A/V cables
DVD Player / Satellite Receiver
AUDIO
OUT
L
VIDEO
OUT
R
TV
VIDEO
L/MONO
AUDIO
R
Stereo VCR
IN
OUT
To Satellite
ANT (75Ω)
ANT-1
OUT
VIDEO AUDIO
DVD IN
COLOR
STREAM
INPUT
L
AUDIO
R
LR
IN
VIDEO 1VIDEO 2
S VIDEO
S-VIDEO
VIDEO
L/MONO
AUDIO
R
OUT to TV
CH 3
CH 4
Satellite IN
Y
Pb
Pr
IN from ANT
To Antenna
Note:
See “Note Regarding Picture Quality” on
page 7.
You can use a standard video cable instead of
an S-video cable between the TV and DVD
player/satellite receiver, but the picture quality
will decrease. The illustration at left shows one
S-video cable and one pair of audio cables
connected from the DVD player/satellite
receiver to Video-1 on the TV.
Do not connect a regular video cable and an
S-video cable to Video-1 (or Video-2) at the
same time or the picture performance will be
unacceptable.
When recording, set Audio Out to
FIXED (see “Selecting variable audio
OUT” on page 33). With Audio Out set
to FIXED, the TV’s volume setting will
not affect the sound level being
recorded.
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States and
other countries, and may subject you to
civil and criminal liability.
your TV
Connecting
Using the
Remote Control
your TV
Setting up
Features
Using the TV’s
Appendix
9
Page 10
Connecting a DVD player with
component video and a VCR
This connection allows you to watch DVD, VCR, or
TV programs. You can record one TV program while
watching another TV program. You also can record a
TV program while watching a DVD.
Your TV has ColorStream
tions. Connecting your TV to a component video
your TV
Connecting
compatible DVD player (such as a Toshiba DVD player
with ColorStream
and performance.
You will need:
®
(component video) connec-
®
) can greatly enhance picture quality
• two coaxial cables
• one set of standard A/V cables
• one set of component video cables
• one pair of standard audio cables
DVD Player with ColorStreamTM (component video)
AUDIO
OUT
VIDEO
OUT
Stereo VCR
LRL
TV
R
OUT
VIDEO
L/MONO
AUDIO
R
YPb Pr
ANT (75Ω)
ANT-1
AUDIO
VIDEO AUDIO
TM
ColorStream
(Component Video)
DVD IN
COLOR
STREAM
Y
INPUT
Pb
L
Pr
R
LR
IN
OUT
S VIDEO
IN
S-VIDEO
VIDEO
L/MONO
AUDIO
R
VIDEO 1VIDEO 2
IN from ANT OUT to TV
CH 3
CH 4
To Antenna
Connecting two VCRs
This connection allows you to record (dub/edit) from one VCR to
another VCR while watching a video program. You also can record from
one TV channel while watching another channel.
You will need:
• two coaxial cables
• two sets of standard A/V cables
VCR1 [Playback]
VCR2
[Recording]
VIDEO AUDIO
TV
OUT
VIDEO
L/MONO
AUDIO
R
VIDEO AUDIO
ANT (75Ω)
ANT-1
L
AUDIO
R
LR
IN
OUT
DVD IN
COLOR
STREAM
Y
INPUT
Pb
Pr
LR
IN
OUT
IN from ANT
VIDEO 1VIDEO 2
IN from ANT
IN
OUT to TV
CH 3
CH 4
S-VIDEO
VIDEO
L/MONO
AUDIO
R
OUT to TV
CH 3
CH 4
To Antenna
Note:
For video cable type, see “Note Regarding
Picture Quality” on page 7.
If VCR1 has S-video, you can use an S-video
cable instead of a standard video cable for
better picture performance.
Do not connect a standard video cable and an
S-video cable to Video-1 (or Video-2) at the
same time or the picture performance will be
unacceptable.
Do not connect the same VCR to the output
and input jacks on the TV at the same time.
When recording, set Audio Out to
FIXED (see “Selecting variable audio
OUT” on page 33). With Audio Out set
to FIXED, the TV’s volume setting will
not affect the sound level being
recorded.
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States and
other countries, and may subject you to
civil and criminal liability.
10
Page 11
Connecting a camcorder
This connection allows you to watch videos recorded on a camcorder.
You will need:
• one pair of audio cables
• one video cable (see notes at right)
Camcorder with S-video
TV Back
ANT (75Ω)
S-VIDEO
AUDIOVIDEO
OUT
L
R
Camcorder
Note:
If your camcorder has an S-video connection,
an S-video cable will provide better picture
performance than a standard video cable.
Do not connect a standard video cable and an
S-video cable to Video-1 (or Video-2) at the
same time or the picture performance will be
unacceptable.
AUDIOVIDEO
OUT
L
R
Toshiba
Welcome to
your TV
Connecting
OUT
VIDEO
L/MONO
AUDIO
R
ANT-1
L
AUDIO
R
DVD IN
COLOR
STREAM
INPUT
Y
Pb
Pr
IN
S-VIDEO
VIDEO
L/MONO
AUDIO
R
VIDEO 1VIDEO 2
TV Front
Connecting an audio amplifier
This connection allows you to use an audio amplifier to adjust the
audio level. This connection also allows you to use external speakers.
You will need:
• one coaxial cable
• one pair of audio cables
To Cable, Cable Box,
Audio Amplifier
or Antenna
AUDIO
LR
OUT
IN
VIDEO-3 IN
VIDEO L/MONO — AUDIO — R
Note:
To control the audio, both the TV and the
amplifier must be turned on. The volume of
both must be set above 0, or you will not hear
any sound. See “Selecting variable audio
OUT” on page 33 for additional details.
Using the
Remote Control
your TV
Setting up
Features
Using the TV’s
TV
ANT (75Ω)
ANT-1
OUT DVD IN
VIDEO
L/MONO
AUDIO
AUDIO
R
COLOR
STREAM
INPUT
L
R
IN
S-VIDEO
Y
Pb
Pr
VIDEO
L/MONO
AUDIO
R
VIDEO 1VIDEO 2
Appendix
11
Page 12
Using the remote control
Preparing the remote control for use
The remote control will operate your TV, most VCR models, and
most cable TV converters, even if they are different brands.
• The remote control is preprogrammed to operate most Toshiba
VCRs and cable TV converters.
• If you own a non-Toshiba device or a Toshiba device that the
remote control is not programmed to operate, you will need to
program the remote control. See “Programming the remote
control” on page 13.
Note:
The remote control provided with your TV
may or may not operate certain features on
your VCR, cable TV converter, or other
electronic equipment. Refer to the owner’s
manual provided with your other equipment
to see which features are available. In
addition, the other remote control may have
buttons not available on your TV’s remote
control. If you would like to use those features
or buttons, you may need to use the original
remote control provided with your other
equipment.
Using the
Remote Control
Installing the remote control batteries
To install the batteries:
1. Slide the battery cover off the back of the remote control.
2. Install two “AA” size batteries. Match the + and – symbols on
the batteries to the symbols on the battery compartment.
3. Slide the battery cover back onto the remote control until the
lock snaps.
Using the remote control to operate a VCR
or cable TV converter
To control a VCR:
Set the TV/CABLE/VCR switch to the VCR position. The
shaded buttons in the illustration at right will then control the
VCR. The unshaded buttons will operate the TV as usual.
To control a cable TV converter:
Set the TV/CABLE/VCR switch to the CABLE position. The
shaded buttons in the top portion of the illustration at right will
then control the cable TV converter.
Caution:
• Dispose of batteries in a designated
disposal area. Do not throw batteries
into a fire.
• Do not mix battery types or combine used
batteries with new ones.
• Remove dead batteries immediately to
prevent battery acid from leaking into the
battery compartment.
• If you do not intend to use the remote
control for a long time, remove the
batteries.
RECALL MUTE
1
4
7
100
VOL VOL
TV
CABLE
VCR
TV/VCR
REC
SLOW
PIP CH LOCATE SWAP
o
2
5
8
0
CH
MENU/
ENTER
CH
EXIT
SOURCESTILL
STOP
REWPAUSE
POWER
3
6
9
CH RTN
ENT
TV/VIDEOFAV CH
A
PLAY
PIP
FF
CHANNEL
NUMBERS
ENT (Used for the
“Enter” command with
some VCRs and cable
TV converters
CHANNEL
TV/CABLE/VCR
switch
VCR buttons (set
TV/CABLE/VCR
switch to “VCR”)
y z
12
CT-90037
Page 13
Programming the remote control
To program the remote control to operate a non-Toshiba VCR or
cable TV converter or a Toshiba device the remote control is not
preprogrammed to operate:
1. Refer to the VCR and cable TV converter code tables (below
and on the next page) to find the code(s) for your VCR or
converter.
If more than one code is listed, try each one separately until you
find the one that works.
2. If you are programming the remote control to operate your:
•VCR: Set the TV/CABLE/VCR switch to “VCR.”
•Cable TV converter: Set the TV/CABLE/VCR switch to
“CABLE.”
3. While holding down RECALL, press the CHANNEL
NUMBERS to enter the three-digit code for your VCR or
cable TV converter brand.
4. Point the remote control at the VCR or converter, and press
POWER to test the code.
•If the VCR or converter responds, you entered the correct
code.
Note:
• In addition to POWER, confirm that all necessary keys on the TV remote
control operate your device. If some keys are not operational, repeat the
device code setup using another code (if other codes are listed for your
device). If, after trying all listed codes, the necessary keys do not operate
your device, use the device’s original remote control.
•If the VCR or converter does not respond, repeat steps 1–4
using another code.
5. Set the TV/CABLE/VCR switch to “TV” to control the TV.
For future reference, write down the codes you used:
VCR code: _____________________
Cable TV converter code: _____________________
RECALL
POWER
CHANNEL
NUMBERS
TV/CABLE/VCR
switch
RECALL MUTE
1
4
7
100
MENU/
VOL VOL
ENTER
TV
CABLE
VCR
EXIT
o
2
5
8
0
CH
CH
POWER
3
6
9
CH RTN
ENT
TV/VIDEOFAV CH
Note:
• Every time you replace the batteries, you
must reprogram the remote control.
• Some newer VCRs are capable of working
on either of two remote codes. These VCRs
have a switch labeled “VCR1/VCR2.” If your
VCR has this kind of switch and does not
respond to any of the codes for your VCR
brand, set the switch to the other position
(VCR1 or VCR2) and reprogram the remote
control.
Toshiba
Welcome to
your TV
Connecting
Using the
Remote Control
your TV
Setting up
VCR code table
Brand Code
Adventura 019
Aiko 297
Aiwa 019
Akai 060, 068, 080, 125,
261
American High 054
Asha 259
Audiovox 056
Beaumark 259
Bell & Howell 123
Brandt 206
Broksonic 140, 203, 230, 314,
380
Calix 056
Canon 054
Capehart 039
Carver 100
CCE 091, 297
Citizen 056, 297
Colt 091
Craig 056, 066, 091, 259
Curtis Mathes 054, 060, 079
Cybernex 259
Daewoo 039, 064, 297
Daytron 039
Dynatech 019
Electrohome 056
Electrophonic 056
Emerex 051
Emerson 019, 021, 056, 062,
080, 087, 140, 203,
227, 228, 230, 231,
297, 313, 314, 380,
498
13
Fisher 066, 073, 085, 123
Fuji 052, 054
Funai 019, 344
Garrard 019, 344
GE 054, 079, 084, 221
Go Video 251, 298
Goldstar 037, 056, 057
Gradiente 019
Harley Davidson 019
Harman/Kardon 057, 094
Harwood 087, 091
Headquarter 065
HI-Q 066
Hitachi 060, 061, 084, 124,
185, 254
Jensen 060
JVC 027, 060, 086
Kenwood 057, 060, 086
Features
Using the TV’s
Appendix
Page 14
Using the
Remote Control
VCR code table (cont.)
Brand Code
KLH 091
Kodak 054, 056
Lloyd 019, 227
Logik 091
LXI 056
Magnavox 054, 058, 100, 129,
168
Magnin 259
Marantz 054, 100
Marta 056
Matsushita 054
MEI 054
Memorex 019, 054, 056, 058,
065, 066, 067, 123,
259
MGA 062, 080
MGN Technology 259
Minolta 061, 124
Mitsubishi 062, 080, 086, 094,
192, 233, 261
Motorola 054, 067
MTC 019, 259
Multitech 019, 091
NAD 077
NEC 057, 059, 060, 069,
086
Nikko 056
Noblex 259
Olympus 054
Optimus 056, 067, 077, 123
Optonica 081
Orion 498
Panasonic 054, 096, 181, 244,
473
Penney 054, 056, 057, 059,
061, 073, 259
Pentax 061, 084, 124
Philco 054
Philips 054, 081, 100, 129
Pilot 056
Pioneer 077, 086
Portland 039
Protec 091
Pulsar 058
Quarter 065
Quartz 065
Quasar 054, 096
Radio Shack 019, 056, 344
Radix 056
Randex 056
RCA 061, 079, 084, 096,
124, 125, 168, 221
Realistic 019, 054, 056, 065,
066, 067, 081, 085,
123, 259
Ricoh 053
Runco 058
Samsung 064, 259
Sanky 058, 067
Sansui 060, 086
Sanyo 065, 066, 123, 259
Scott 062, 064, 140, 203,
229, 230, 231
Sears 054, 056, 061, 065,
066, 073, 085, 123,
124
Sharp 067, 081
Shintom 091
Shogun 259
Singer 091
Sony 051, 052, 053, 054
STS 061
Sylvania 019, 054, 062, 100,
129
Symphonic 019, 344
Tatung 060
Teac 019, 060
Technics 054, 181
Te knika 019, 054, 056, 071
Telefunken 206
TMK 227, 259
Toshiba 062, 064, 085, 229,
231, 385
Totevision 056, 259
Unitech 259
Vector 064
Vector Research 057, 059
Video Concepts 059, 064, 080
Videosonic 259
Wards 019, 054, 061, 066,
067, 081, 091, 168,
231, 259
XR-1000 019, 054, 091
Yamaha 057
Zenith 052, 053, 058
Cable TV converter
code table
Brand Code
ABC 020, 022, 027, 030,
032, 033, 036, 066
Antronix 041
Archer 041, 058, 172
Belcor 075
Cable Star 075
Cabletenna 041
Cableview 041
Century 172
Citizen 172
Colour Voice 044, 050
Comtronics 059, 079
Contec 038
Dae Ryung 027
Eastern 021
Focus 419
Garrard 172
CG Electronics 075
Gemini 034, 089
General Instrument 030, 295
Gold Star 059, 163
Hamlin 028, 039, 053, 278,
292
Hitachi 030
Hytex 026
Jasco 172
Jerrold 022, 030, 031, 033,
034, 066, 295
Macom 052
Magnavox 046
Memorex 019
Movietime 175
NSC 089, 175
Oak 026, 038, 267
Panasonic 019, 040, 126
Paragon 019
Philips 044, 046, 047, 048,
049, 050, 172
Pioneer 042, 163, 552
Popular Mechanics 419
Pulsar 019
RCA 040
Regal 039, 278, 292
Recoton 419
Regency 021
Rembrandt 030, 089
Runco 019
Samsung 059, 163
Scientific Atlanta 025, 027, 036, 296
Signal 034, 059
Signature 030
SL Marx 059
Sprucer 040
Standard
Components 174
Starcom 022, 034, 066
Stargate 034, 059
Starquest 034
Sylvania 020
Teleview 059
Texscan 020
Tocom 031, 032, 078
Toshiba 019
Tusa 034
Unika 041, 172
United Artists 026
United Cable 022
Universal 041, 058, 075, 096,
172, 210
Viewstar 046, 079, 230
Zenith 019
Zentek 419
14
Page 15
Learning about the remote control
Toshiba
Welcome to
RECALL displays on-screen information (page 29)
MUTE turns off the sound (page 31)
POWER turns the TV on and off
Channel Numbers (0–9, 100) directly tune channels (page 18)
CH RTN (Channel Return) returns to the last viewed channel (page 19)
yz x • (Up/Down/Left/Right Arrows) select or adjust menu items when a
menu is on-screen (page 16)
Channel yz cycles through programmed channels (page 17)
MENU accesses on-screen menus (page 16)
VOL yz adjusts the volume level
EXIT closes menus (page 16)
TV/CABLE/VCR switch switches among TV, Cable, and VCR inputs (page
12)
TV/VIDEO selects the signal input source (page 17)
FAV C H zy select channels programmed as favorite channels (page 19, 20)
VCR Buttons (REC, TV/VCR, STOP, PLAY, SLOW, PAUSE, REW, FF) control a
VCR. The TV/CABLE/VCR switch must be set to “VCR”; see pages 12 and
13 for details.
Note:
The PIP functions (STILL, SOURCE, PIP, PIP CH,
LOCATE, and SWAP) are not available.
RECALL MUTE
o
1
4
7
100
TV
CABLE
VCR
REC
SLOW
2
5
8
0
CH
MENU/
VOL VOL
ENTER
CH
EXIT
TV/VCR
SOURCESTILL
PIP CH LOCATE SWAP
STOP
REWPAUSE
POWER
3
6
9
CH RTN
ENT
TV/VIDEOFAV CH
A
PLAY
PIP
FF
your TV
Connecting
Using the
Remote Control
your TV
Setting up
15
CT-90037
Features
Using the TV’s
Appendix
Page 16
Setting up your TV
TV
CABLE
VCR
MENU/
ENTER
CH
CH
VOL VOL
REWPAUSE
FF
SOURCESTILL
PIP
SLOW
PIP CH LOCATE SWAP
STOP
PLAY
REC
TV/VCR
TV/VIDEOFAV CH
A
CT-90037
EXIT
After installing the batteries and programming the remote control, you
will need to set some preferences on your TV using the menu system.
You can access the menus using the buttons on your TV or remote
control.
• When you make a menu selection, your changes occur immediately.
You do not have to press MENU or EXIT to save your changes.
Note: The TV front panel does not have an EXIT button.
• When you are finished programming the menus, you can press EXIT
to clear the on-screen display, or wait 15 seconds and the on-screen
display will disappear automatically. Changes are automatically saved
either way.
TV Front Panel
DEMO MENU TV/VIDEO VOLUME CHANNEL
POWER
MENU
MENU
your TV
Setting up
Changing the on-screen display language
You can choose from three different languages (English, French, or
Spanish) for the on-screen display of menus and messages.
To select an on-screen display language:
1. Press MENU.
2. Press
3. Press
4. Press
x or • until the SET UP menu appears.
y or z to highlight LANGUAGE.
x or • to highlight your desired language.
SET UP
LANGUAGE:
[ENGLISH] FRANCAIS ESPANOL
TV/CABLE:
CH PROGRAM
ADD/ERASE:
MORE
MOVE SELECT
[TV] CABLE
[ADD] ERASE
[
]
[
]
CONFIGURATION
LANGUE:
TV/CABLE:
PROGRAMME CAN
AJOUT/EFF:
PLUS
BOUGER CHOISIR
ENGLISH [FRANCAIS] ESPANOL
[TV] CABLE
[AJOUT] EFF
[
[
]
]
yz x •
EXIT
16
Page 17
Selecting the signal source
Use the TV/VIDEO button on the remote control or TV to select the
signal source connected to your TV.
To change the signal source:
Using the remote control: Press TV/VIDEO on the remote
control, and then press the corresponding CHANNEL NUMBER
for the desired source (see the illustration below).
Using the remote control or TV: Repeatedly press TV/VIDEO
until the selected signal source displays in purple.
TV Front Panel
Toshiba
Welcome to
0: TV
1: VIDEO 1
2: VIDEO 2
3: VIDEO 3
4: ColorStream
To verify the signal source:
Press RECALL or press TV/VIDEO on the remote control once.
Programming channels into the TV’s memory
When you press CHANNEL ▲▼ on the TV or remote control,
the TV stops only on the channels stored in the TV’s memory.
Note: To tune the TV to a channel not programmed into the memory,
use the CHANNEL NUMBERS on the remote control.
Follow the steps below and on the next page to program channels into
the TV’s memory.
Programming channels automatically
Your TV can automatically detect all active channels in your area
and store them in the TV’s memory. After the channels are stored
automatically, you can manually add or erase individual channels
(see page 18).
To program channels automatically:
1. Press MENU.
2. Press
3. Press
4. Press
5. Press
x or • to highlight the SET UP menu.
y or z to highlight TV/CABLE.
x or • to highlight TV (if you use an antenna) or CABLE (if
you use cable).
z to highlight CH PROGRAM.
RECALL MUTE
o
1
2
4
5
8
7
100
0
CH
MENU/
VOL VOL
ENTER
CH
TV
CABLE
VCR
EXIT
TV/VCR
REC
SLOW
PIP CH LOCATE SWAP
CT-90037
SOURCESTILL
STOP
REWPAUSE
POWER
3
6
9
CH RTN
ENT
TV/VIDEOFAV CH
A
PLAY
PIP
FF
RECALL
CHANNEL
NUMBERS
MENU
yz x •
CHANNEL
yz
TV/VIDEO
your TV
Connecting
Using the
Remote Control
your TV
Setting up
Features
Using the TV’s
SET UP
LANGUAGE:
[ENGLISH] FRANCAIS ESPANOL
TV/CABLE:
CH PROGRAM
ADD/ERASE:
MORE
[
]
MOVE SELECT
[TV] CABLE
[ADD] ERASE
[
]
SET UP
LANGUAGE:
[ENGLISH] FRANCAIS ESPANOL
TV/CABLE:
CH PROGRAM
ADD/ERASE:
MORE
[
]
MOVE SELECT
[TV] CABLE
[ADD] ERASE
[
]
6. Press x or • to start automatic channel programming (“CH
PROGRAM” displays on-screen). The TV automatically cycles
through every TV or cable channel (depending on which you
selected), and stores all active channels in the TV’s memory.
7. When automatic channel programming is complete, the message
“CH Programming Completed” appears.
8. Press CHANNEL
▲▼ to view the programmed channels.
17
Appendix
Page 18
Adding and erasing channels manually
After you have automatically programmed all active channels into the
TV’s memory, you can manually add and erase individual channels.
To add or erase a channel in the TV’s memory:
1. Tune the TV to the channel you want to add or erase. If you are
adding a channel, you will need to use the CHANNEL
NUMBERS to select the channel.
2. Press MENU.
3. Press
4. Press
x or • to highlight the SET UP menu.
y or z to highlight ADD/ERASE.
SET UP
LANGUAGE:
[ENGLISH] FRANCAIS ESPANOL
TV/CABLE:
CH PROGRAM
ADD/ERASE:
MORE
MOVE SELECT
[TV] CABLE
[ADD] ERASE
[
[
]
]
5. Press x or • to highlight ADD or ERASE, whichever function
you want to perform.
6. Press MENU.
7. Repeat steps 1–6 for other channels you want to add or erase,
or press EXIT to return to normal TV viewing.
RECALL MUTE
o
1
4
7
100
CH
MENU/
VOL VOL
ENTER
CH
TV
CABLE
VCR
EXIT
2
5
8
0
POWER
3
6
9
CH RTN
ENT
CHANNEL
NUMBERS
MENU
yz x •
CHANNEL
yz
EXIT
your TV
Setting up
Changing channels
To change to the next programmed channel:
Press CHANNEL
yz.
To change to a specific channel (programmed or unprogrammed):
Press the CHANNEL NUMBERS (0–9 and 100).
Note: For channels 100 and higher, press the 100 button, and
then the next two channel numbers (for example, to select
channel 100, press 100, 0, 0; to select channel 125, press
100, 2, 5).
Image tilt correction
When you install or change the direction of the TV, the picture may
become tilted (caused by the Earth’s magnetism). If this happens, use
the image tilt correction feature to obtain the best possible picture.
To adjust the image tilt:
1. Press MENU, and then press
appears.
2. Press
3. Press
y or z to highlight IMAGE TILT.
x or • to adjust the picture tilt (from –10 to +10).
SET UP
MORE
DEMO [START] STOP
IMAGE TILT +3
–
x or • until the SET UP menu
+
[
]
MOVE SELECT
[
]
18
Page 19
Using the TV’s features
Adjusting the channel settings
Switching between two channels
You can switch between two channels without entering an actual
channel number each time.
To switch between two channels:
1. Select the first channel you want to view.
2. Select a second channel using the CHANNEL NUMBERS
(0–9 and 100).
3. Press CH RTN (channel return). The previous channel will
display.
Every time you press CH RTN, the TV will switch back and forth
between the last two channels you tuned.
Programming your favorite channels
The Favorite Channel feature allows you to use the FAV CH ▼▲
buttons on the remote control to cycle through your favorite channels, skipping over channels you do not normally watch. You can
program a maximum of 12 favorite channels.
Note: You can still use CHANNEL
channels you previously programmed into the TV’s memory (see
“Programming channels in to the TV’s memory” on page 17).
▲▼ to cycle through all the
RECALL MUTE
o
1
2
4
5
8
7
100
0
CH
MENU/
VOL VOL
ENTER
CH
TV
CABLE
VCR
EXIT
TV/VCR
REC
SLOW
PIP CH LOCATE SWAP
SOURCESTILL
STOP
REWPAUSE
POWER
3
6
9
CH RTN
ENT
TV/VIDEOFAV CH
A
PLAY
PIP
FF
CHANNEL
NUMBERS
CH RTN
MENU
yz x •
CHANNEL
yz
EXIT
FAV CH zy
Toshiba
Welcome to
your TV
Connecting
Using the
Remote Control
To program your favorite channels:
1. Tune the TV to a channel you want to program as a favorite
channel.
2. Press MENU.
3. Press
4. Press
x or • to highlight the SET UP menu.
y or z to highlight FAVORITE CH.
SET UP
MORE
V-CHIP CONTROL
FAVORITE CH
CH LABEL
VIDEO LABEL
TIMER: 0 MIN
MORE
MOVE
[
[
START
]
]
5. Press x or • to display the FAVORITE CH menu.
6. Press
7. Press
x or • to highlight SET.
z to add the current channel to the list.
8. Press EXIT.
SET UP
FAVORITE CH
[SET] CLEAR
256
0000
0000
[TV: CYAN, CABLE: BLUE]
[
SELECT
] [
SET
11
]
CT-90037
your TV
Setting up
Features
Using the TV’s
Appendix
9. Repeat steps 1–8 for up to 12 channels.
(Continued on next page)
19
Page 20
To select your favorite channels:
TV
CABLE
VCR
MENU/
ENTER
CH
CH
VOL VOL
REWPAUSE
FF
SOURCESTILL
PIP
SLOW
PIP CH LOCATE SWAP
STOP
PLAY
REC
TV/VCR
TV/VIDEOFAV CH
A
EXIT
CT-90037
Press FAV
zy on the remote control to cycle through the favorite
channels you programmed.
To clear a favorite channel:
1. Tune the TV to the channel you want to clear from your favorite
channel list.
2. Press MENU.
3. Press
4. Press
5. Press
6. Press
x or • to highlight the SET UP menu.
y or z to highlight FAVORITE CH.
x or • to display the FAVORITE CH menu.
x or • to highlight CLEAR.
SET UP
FAVORITE CH
SET [CLEAR]
256
0000
0000
[TV: CYAN, CABLE: BLUE]
[
SELECT
] [
CLEAR
0
]
7. Press z to clear the current channel number from the list.
8. Press EXIT.
9. Repeat steps 1–8 for other channels you want to clear from your
favorite channel list.
Note:
The FAV zy buttons will not work until you
program at least one favorite channel.
The FAV
zy buttons function as menu x•
buttons when a menu is on-screen.
MENU
yz x •
EXIT
FAV CH zy
Using the TV’s
Using the V-Chip Control (blocking) feature
You can use the V-Chip Control feature to block certain programs or
channels, to prevent others from viewing them.
Selecting a PIN code
Before you can block programs or channels, you must select a personal
identification number (PIN) code. Your PIN code allows you to access
the V-Chip Control menu, and prevents others from changing the
rating and blocking limits you set.
Features
To select your PIN code and access the V-Chip Control menu:
1. Press MENU.
2. Press
3. Press
4. Press
x or • to highlight the SET UP menu.
y or z to highlight V-CHIP CONTROL.
x or • to display the PIN code entering screen.
SET UP
MORE
V-CHIP CONTROL
FAVORITE CH
CH LABEL
VIDEO LABEL
TIMER: 0 MIN
MORE
[
]
MOVE
START
[
]
SET UP
BLOCKING IS RESET
PLEASE ENTER NEW PIN CODE
_ _ _ _
SELECT [0–9] END [EXIT]
20
Page 21
5. Use the CHANNEL NUMBERS (0–9) to enter your four-digit
PIN code. After the code is entered, the V-Chip Control menu
appears.
6. Press
y or z to highlight ENABLE BLOCKING.
RECALL MUTE
o
1
2
POWER
3
Toshiba
Welcome to
RECALL
SET UP
ENABLE BLOCKING [Y] N
SET RATING
SET BLOCKING OPTIONS
NEW PIN CODE
BLOCK CHANNEL
VIDEO LOCK OFF
MOVE
[
[
SELECT
]
]
V-Chip Control (Blocking) Menu
7. Press x or • to highlight “Y,” which enables all blocking by
activating the V-Chip. See “Blocking programs by ratings” on
page 22, “Blocking unrated movies and programs” on page 23,
and “Blocking channels” on page 24.
(Note: Highlight “N” to deactivate the V-Chip Control feature
and disable blocking.)
Note: The BLOCK CHANNEL and VIDEO LOCK functions are not effected by the
ENABLE BLOCK setting.
Changing your PIN code
1. Press MENU.
2. Press
3. Press
4. Press
x or • to highlight the SET UP menu.
y or z to highlight V-CHIP CONTROL.
x or • to display the PIN code entering screen.
5. Use the Channel Number buttons (0–9) to enter your existing
PIN code. After the code is entered, the V-Chip Control menu
appears.
6. Press
7. Press
y or z to highlight NEW PIN CODE.
x or • to display the new PIN code entering screen.
SET UP
ENABLE BLOCKING [Y] N
SET RATING
SET BLOCKING OPTIONS
NEW PIN CODE
BLOCK CHANNEL
VIDEO LOCK OFF
[
]
MOVE
SELECT
[
]
SET UP
PLEASE ENTER NEW PIN CODE
_ _ _ _
SELECT [0–9] END [EXIT]
4
7
100
MENU/
VOL VOL
ENTER
TV
CABLE
VCR
EXIT
6
5
CHANNEL
8
9
CH RTN
0
ENT
CH
CH
NUMBERS
MENU
yz x •
EXIT
If you forget your PIN code
1. Press MENU.
2. Press
x or • to highlight the
SET UP menu.
3. Press
y or z to highlight V-CHIP
CONTROL.
4. Press
x or • to display the PIN
code entering screen.
5. While the PIN code entering
screen is displayed, press RECALL
four times within 5 seconds.
6. Use the CHANNEL NUMBERS
(0–9) to enter a new PIN code.
After the new code is entered, the
V-Chip Control menu appears.
7. Press EXIT to return to normal
TV viewing.
your TV
Connecting
Using the
Remote Control
your TV
Setting up
Features
Using the TV’s
8. Use the CHANNEL NUMBERS (0–9) to enter a new PIN
code. After the new code is entered, the V-Chip Control menu
appears.
9. Press EXIT to return to normal TV viewing.
21
Appendix
Page 22
Blocking programs by ratings
The Motion Picture Association of America (MPAA) uses a rating
system to qualify motion picture content. Television broadcasters
employ a similar rating system to qualify the content of television
programs. The MPAA, Youth TV, and TV ratings work with the
V-Chip feature to allow you to block access to programs that exceed
the rating limits you set.
Ratings definitions
Note:
Press RECALL to see the rating of the program
you are viewing. Not all programs are rated,
however. To block programs or movies that are
not rated, see “Blocking unrated movies and
programs” on page 23.
MPAA Ratings
X For adults only.
NC17 Not intended for anyone 17 or under.
R Restricted. Under 17 requires an accompanying
parent or adult guardian.
PG13 Parents strongly cautioned. Some material may
not be appropriate for children under 13.
PG Parental guidance suggested. Some material
may not be appropriate for children.
G General audience. Appropriate for all ages.
Youth TV Ratings
Y7, Y7FV Directed to older children. Programs rated Y7
are designed for children 7 and above.
Programs rated Y7FV contain fantasy violence
that may be more intense or combative than
Y7-rated programs.
Y For all children. Programs rated Y are designed
to be appropriate for all children.
TV Ratings
MA Mature audience only. This program is specifically
designed to be viewed by adults and therefore
may be unsuitable for children under 17.
Dialog Intensely suggestive dialog
Language Crude or indecent language
Sex Explicit sexual activity
Violence Graphic violence
14 Parents strongly cautioned. This program contains
some material that many parents would find
unsuitable for children under 14 years of age.
Dialog Frequent suggestive dialog
Language Frequent coarse language
Sex Intense sexual situations
Violence Intense violence
PG Parental guidance suggested. This program
contains material that parents may find unsuitable
for younger children.
Dialog Some suggestive dialog
Language Occasional coarse language
Sex Some sexual situations
Violence Moderate violence
G General audience. Most parents would find this
program suitable for all ages.
No DLSV Programs without any Dialog, Language, Sex, or
Violence ratings.
Using the TV’s
Features
To block programs by rating:
1. Press MENU.
2. Press
3. Press
4. Press
x or • to highlight the SET UP menu.
y or z to highlight V-CHIP CONTROL.
x or • to display the PIN code entering screen.
5. Use the CHANNEL NUMBERS (0–9) to enter your four-digit
PIN code. After the code is entered, the V-Chip Control menu
appears.
6. Press
7. Press
y or z to highlight ENABLE BLOCKING.
x or • to highlight “Y,” which enables all blocking by
activating the V-Chip. (Note: Highlight “N” to deactivate the
V-Chip Control feature and disable blocking.)
8. Press
y or z to highlight SET RATING.
SET UP
ENABLE BLOCKING [Y] N
SET RATING
SET BLOCKING OPTIONS
NEW PIN CODE
BLOCK CHANNEL
VIDEO LOCK OFF
MOVE
[
[
]
]
SELECT MOVE
SET UP
ENABLE BLOCKING [Y] N
SET RATING
SET BLOCKING OPTIONS
NEW PIN CODE
BLOCK CHANNEL
VIDEO LOCK OFF
[
]
SELECT
[
]
22
RECALL MUTE
o
1
4
7
100
CH
MENU/
VOL VOL
ENTER
CH
TV
CABLE
VCR
EXIT
2
5
8
0
POWER
3
6
9
CH RTN
ENT
RECALL
CHANNEL
NUMBERS
MENU
yz x •
Page 23
9. Press x or • to display the Set Rating menu.
10. Press
y or z to highlight MPAA Rating, Youth TV Rating, or
TV Rating.
11. Press
• to select (or x to deselect) the ratings to be blocked.
Blocked ratings will be marked with “x”; unblocked ratings will
will be marked with “✔.” All ratings higher than the ones that are
selected (“x”) are blocked as well. For example, if you block the
MPAA rating R, programs with the higher ratings NC17 and X
will also be blocked.
SET UP
MPAA RATING:
X NC17 R PG13 PG G
xx
YOUTH TV RATING:
Y7FV Y7
TV RATING
MOVE
Y
[
]
SELECT
[
]
SET UP
[
]
MA 14 PG G
SELECT
TV RATING:
DIALOG:
LANGUAGE:
SEX:
VIOLENCE:
NO DLSV:
BACK TO V-CHIP MENU
MOVE
x
[
]
12. When you finish selecting the program ratings to be blocked:
• To return to the V-Chip menu, press
BACK TO V-CHIP MENU, and then press
y or z to highlight
x or •.
• To r eturn to normal TV viewing, press EXIT.
Unblocking programs temporarily
When you try to view a program with a ratings block, a message
appears stating that the program has been blocked because the
program’s rating exceeds the set limits. To temporarily override the
block and view the program, press MUTE and enter your PIN code.
To reset your original ratings blocks, turn the TV off and then on
again.
RECALL MUTE
o
1
2
4
5
8
7
100
0
CH
MENU/
VOL VOL
ENTER
CH
TV
CABLE
VCR
EXIT
POWER
3
6
9
CH RTN
ENT
MUTE
MENU
yz x •
EXIT
Toshiba
Welcome to
your TV
Connecting
Using the
Remote Control
your TV
Setting up
THIS PROGRAM HAS BEEN BLOCKED!
TV-PG L V
EXCEEDS SET LIMITS
PUSH MUTE TO ENTER PIN
BLOCKING IS ACTIVE
PLEASE ENTER PIN CODE
TO TEMPORARILY UN-BLOCK
_ _ _ _
SELECT [0–9] END [EXIT]
Blocking unrated movies and programs
Some movies and programs are not rated. You can use the V-Chip
Control feature to block unrated movies and programs.
To block unrated movies and programs:
1. Press MENU.
2. Press
3. Press
4. Press
x or • to highlight the SET UP menu.
y or z to highlight V-CHIP CONTROL.
x or • to display the PIN code entering screen.
5. Use the CHANNEL NUMBERS (0–9) to enter your four-digit
PIN code. After entering the code, the V-Chip Control menu
appears.
6. Press
y or z to highlight ENABLE BLOCKING.
(Continued on next page)
Features
Using the TV’s
Appendix
23
Page 24
7. Press x or • to highlight “Y,” which enables all blocking by
activating the V-Chip. (Note: Highlight “N” to deactivate the
V-Chip feature and disable blocking.)
8. Press
9. Press
10. Press
y or z to highlight SET BLOCKING OPTIONS.
x or • to display the unrated movie/program blocking menu.
y or z to highlight either BLOCK MPAA UNRATED (to
block unrated movies) or BLOCK TV NONE RATING (to block
unrated TV programs).
11. Press
x or • to highlight “Y” to block unrated movies/programs.
(Note: Highlight “N” to unblock unrated movies/programs.)
12. Press EXIT to return to normal TV viewing.
Using the TV’s
Features
SET UP
ENABLE BLOCKING [Y] N
SET RATING
SET BLOCKING OPTIONS
NEW PIN CODE
BLOCK CHANNEL
VIDEO LOCK OFF
[
]
MOVE
SELECT
[
]
SET UP
BLOCK MPAA UNRATED: [Y ] N
BLOCK TV NONE RATING: [Y] N
BACK TO V-CHIP MENU
NOTICE: ENABLING THIS OPTION
MAY BLOCK EMERGENCY
MESSAGES
[
MOVE
[
]
SELECT
]
Blocking channels
You can block a maximum of four TV channels and four cable
channels. Blocked channels cannot be viewed, regardless of their
programs’ ratings. If you try to tune the TV to a blocked channel,
the nearest unblocked channel will display.
To block a channel:
1. Tune the TV to the channel you want to block.
2. Press MENU.
3. Press
4. Press
5. Press
x or • to highlight the SET UP menu.
y or z to highlight V-CHIP CONTROL.
x or • to display the Enter PIN Code screen.
6. Use the CHANNEL NUMBERS (0–9) to enter your four-digit
PIN code. After entering the code, the V-Chip Control menu
appears.
7. Press
8. Press
9. Press
10. Press
y or z to highlight BLOCK CHANNEL.
x or • to display the BLOCK CHANNEL menu.
x or • to highlight SET.
z to add the current channel to the list.
Caution:
Blocking unrated television programs
(those rated “TV NONE”) may block
emergency messages.
Note:
After programming CHANNEL BLOCK, tune
the TV to a channel that is not blocked before
turning off the TV.
RECALL MUTE
1
4
7
100
o
CH
POWER
3
2
6
5
8
9
CH RTN
0
ENT
CHANNEL
NUMBERS
MENU
SET UP
ENABLE BLOCKING [Y] N
SET RATING
SET BLOCKING OPTIONS
NEW PIN CODE
BLOCK CHANNEL
VIDEO LOCK OFF
[
]
MOVE
SELECT
[
]
SET UP
BLOCK CHANNEL
[SET]
000
[
SELECT
END [EXIT]
CLEAR
] [
SET
6
11. Press EXIT.
12. Repeat steps 1–11 to block additional channels.
MENU/
VOL VOL
ENTER
CH
TV
CABLE
VCR
]
EXIT
yz x •
EXIT
24
Page 25
To unblock all blocked channels:
Note: This will unblock every channel you have blocked. You cannot
unblock individual channels.
1. Press MENU.
2. Press
3. Press
4. Press
x or • to highlight the SET UP menu.
y or z to highlight V-CHIP CONTROL.
x or • to display the PIN code entering screen.
5. Use the CHANNEL NUMBERS (0–9) to enter your four-digit
PIN code. After entering the code, the V-Chip Control menu
appears.
6. Press
7. Press
y or z to highlight BLOCK CHANNEL.
x or • to display the BLOCK CHANNEL menu.
SET/CLEAR will be highlighted.
8. Press
9. Press
x or • to highlight CLEAR.
z to clear all blocked channels from the list.
10. Press EXIT.
RECALL MUTE
1
4
7
100
MENU/
VOL VOL
ENTER
TV
CABLE
VCR
EXIT
o
2
5
8
0
CH
CH
POWER
3
6
9
CH RTN
ENT
CHANNEL
NUMBERS
MENU
yz x •
EXIT
Toshiba
Welcome to
your TV
Connecting
Locking video inputs
You can use the Video Lock feature to block the input sources
(Video 1, Video 2, Video 3, and ColorStream) and channels 3 and 4.
Note: The Video Lock feature is independent of the Enable Blocking
option of V-Chip control (page 21).
The Video Lock options are:
Video: Blocks Video 1, Video 2, Video 3, and ColorStream.
Video+: Blocks Video 1, Video 2, Video 3, ColorStream, and
channels 3 and 4.
Off: Disables the Video Lock feature.
To set up video lock:
1. Press MENU.
2. Press
3. Press
4. Press
5. Use the CHANNEL NUMBERS (0–9) to enter your four-digit
6. Press
7. Press
x or • to highlight the SET UP menu.
y or z to highlight V-CHIP CONTROL.
x or • to display the PIN code entering screen.
PIN code. After entering the code, the V-Chip Control menu
appears.
y or z to highlight VIDEO LOCK.
x or • to select either VIDEO, VIDEO+, or OFF.
Note:
In normal TV viewing, if you cannot access the
input sources (Video 1, Video 2, Video 3, or
ColorStream) or channel 3 or 4, make sure
Video Lock is set to OFF.
Using the
Remote Control
your TV
Setting up
Features
Using the TV’s
SET UP
MORE
V-CHIP CONTROL
FAVORITE CH
CH LABEL
VIDEO LABEL
TIMER: 0 MIN
MORE
[
]
MOVE
8. Press EXIT.
START
SET UP
ENABLE BLOCKING [Y] N
SET RATING
SET BLOCKING OPTIONS
NEW PIN CODE
BLOCK CHANNEL
VIDEO LOCK VIDEO VIDEO+ [OFF]
[
]
MOVE
[
SELECT
]
[
]
Appendix
25
Page 26
Channel labels
You can assign labels to a maximum of 32 channels. Each channel
label can have a maximum of four characters.
Channel labels appear on-screen above the channel number every time
you turn on the TV, change the channel, or press RECALL.
RECALL MUTE
o
1
2
POWER
RECALL
3
To create a channel label:
1. Tune the TV to the channel you want to label.
2. Press MENU.
3. Press
4. Press
x or • to highlight the SET UP menu.
y or z to highlight CH LABEL.
SET UP
MORE
V-CHIP CONTROL
FAVORITE CH
CH LABEL
VIDEO LABEL
TIMER: 0 MIN
MORE
MOVE
[
[
START
]
]
5. Press x or • to display the CH LABEL menu.
6. Press
7. Press
x or • to highlight SET.
z to highlight LABEL.
SET UP
CH LABEL
SET/CLEAR [SET] CLEAR
LABEL
SET UP MENU
[
MOVE
_ _ _ _
[
SELECT
]
]
SET UP
CH LABEL
SET/CLEAR [SET] CLEAR
LABEL
SET UP MENU
[
]
MOVE
SET [ENT]
SELECT
_ _ _ _
[
]
4
7
100
CH
MENU/
VOL VOL
ENTER
CH
TV
CABLE
VCR
EXIT
6
5
CHANNEL
8
9
CH RTN
0
ENT
NUMBERS
MENU
yz x •
EXIT
Using the TV’s
Features
8. Repeatedly press x or • to scan through the list of available
characters until the desired character appears in the first space.
9. Press MENU.
10. Repeat steps 8 and 9 to enter the rest of the characters.
Note: For a blank space in the label name, choose a blank space from the
list of characters.
11. Press EXIT.
12. Repeat steps 1–11 for up to 32 channels.
To erase a channel label:
1. Select the channel whose label you want to erase.
2. Press MENU.
3. Press
4. Press
5. Press
6. Press
x or • to highlight the SET UP menu.
y or z to highlight CH LABEL.
x or • to display the CH LABEL menu.
x or • to highlight CLEAR.
7. Press MENU.
8. Repeat steps 1–7 to erase other channel labels, or press EXIT to
return to normal TV viewing.
26
Page 27
Video labels
Use the Video Label feature to label each input source for your TV,
from the following preset list of labels:
–:Uses the default label name
VCR: Video cassette recorder
DVD: Digital video disc or digital versatile disc
DTV: Digital TV set-top box
SAT: Satellite box
CBL: Cable box
To set up video labels:
1. Press MENU.
2. Press
3. Press
4. Press
5. Press
6. Press
x or • to highlight the SET UP menu.
y or z to highlight VIDEO LABEL.
x or • to display the Video Label screen.
y or z to highlight the input source to be labeled
(VIDEO 1, VIDEO 2, VIDEO 3, or ColorStream).
x or • to select the desired label for that input source.
SET UP
MORE
V-CHIP CONTROL
FAVORITE CH
CH LABEL
VIDEO LABEL
TIMER: 0 MIN
MORE
[
]
MOVE
START
[
]
SET UP
VIDEO LABEL
VIDEO1 – VCR DVD DTV [SAT] CBL
VIDEO2 –
VIDEO3 –
ColorStream
–
SET UP MENU
MOVE
[
[
SELECT
]
]
RECALL MUTE
o
1
2
4
5
8
7
100
0
CH
MENU/
VOL VOL
ENTER
CH
TV
CABLE
VCR
EXIT
POWER
3
6
9
CH RTN
ENT
MENU
yz x •
EXIT
Toshiba
Welcome to
your TV
Connecting
Using the
Remote Control
7. Press EXIT.
8. Repeat steps 1–7 to label the other input sources.
9. When done setting up video labels:
• To return to the previous menu, press
SET UP MENU, and then press
y or z to highlight
x or •.
• To return to normal TV viewing, press EXIT.
your TV
Setting up
Features
Using the TV’s
Appendix
27
Page 28
Adjusting the picture
Adjusting the picture quality
You can adjust the picture’s contrast, brightness, sharpness, color, and
tint. Your picture quality adjustments are stored automatically in the
TV’s memory. You can keep these settings or choose preset options in
the PREFERENCE menu (see “Selecting the color temperature”
below, and “Adjusting the picture preference” on the next page.)
To adjust the picture quality:
1. Press MENU.
2. Press
3. Press
x or • to highlight the PICTURE menu.
y or z until the quality you want to adjust is highlighted.
PICTURE
CONTRAST 50
BRIGHTNESS 50
SHARPNESS 50
COLOR 50
TINT 0
RESET
[
]
MOVE
–
[
]
ADJUST
Note:
+
To reset the picture (and audio)
adjustments to the factory settings,
select RESET in the PICTURE menu.
4. Press x or • to adjust the level, as described in the following table:
Selection Pressing
Contrast Lower Higher
Brightness Darker Lighter
Sharpness Softer Sharper
Color Paler Deeper
Tint Reddish Greenish
RECALL MUTE
o
1
2
4
5
8
7
100
0
CH
MENU/
VOL VOL
ENTER
CH
TV
CABLE
VCR
EXIT
POWER
3
6
9
CH RTN
ENT
MENU
yz x •
Using the TV’s
Features
Selecting the color temperature
You can change the picture quality by selecting from three preset color
temperatures—cool, medium, and warm—as described in the
following table:
Mode Picture Quality
Cool Blueish
Medium Neutral
Warm Reddish
To select the color temperature:
1. Press MENU.
2. Press
3. Press
4. Press
x or • to highlight the PREFERENCE menu.
y or z to highlight COLOR TEMPERATURE.
x or • to highlight the mode you prefer.
PREFERENCE
COLOR TEMPERATURE
[COOL] MEDIUM WARM
PICTURE PREFERENCE
[SPORTS] STANDARD MOVIE MEMORY
[
MOVE
[
]
SELECT
]
28
Page 29
Adjusting the picture preference
You can select from four picture modes—Sports, Standard, Movie,
and Memory—as described in the following table:
Mode
Sports
Standard
Movie
Memory
Picture Quality
Bright and dynamic picture (factory-set)
Standard picture quality (factory-set)
Movie-like picture setting (factory-set)
Your personal preferences (set by you; see
Adjusting the picture quality” on previous page)
To adjust the picture preference:
1. Press MENU.
2. Press
3. Press
4. Press
x or • to highlight the PREFERENCE menu.
y or z to highlight PICTURE PREFERENCE.
x or • to highlight the mode you prefer.
PREFERENCE
COLOR TEMPERATURE
[COOL] MEDIUM WARM
PICTURE PREFERENCE
[SPORTS] STANDARD MOVIE MEMORY
[
MOVE
[
]
SELECT
]
RECALL MUTE
o
1
4
7
100
CH
MENU/
VOL VOL
ENTER
CH
TV
CABLE
VCR
EXIT
2
5
8
0
POWER
3
6
9
CH RTN
ENT
RECALL
MENU
yz x •
EXIT
Toshiba
Welcome to
your TV
Connecting
Using the
Remote Control
Displaying on-screen information
Press RECALL to display the following information on-screen:
• Channel number or video mode
• Channel label (if set)
• Audio status (stereo or SAP)
• Rating of current program (if rated)
Setting the off timer
The off timer turns off the TV automatically.
To set the off timer:
1. Press MENU.
2. Press
3. Press
4. Press
5. Press EXIT to exit the menu and return to
To cancel the off timer:
x or • to highlight the SETUP menu.
y or z to highlight TIMER.
• to increase (or x to decrease) the amount
of time until the TV turns off automatically (in
10-minute increments, to a maximum of 180).
normal TV viewing.
SET UP
MORE
V-CHIP CONTROL
FAVORITE CH
CH LABEL
VIDEO LABEL
TIMER: 30 MIN
MORE
[
]
MOVE
Set the off timer to 0 (zero) minutes in step 4 above, or turn the
TV off and then on again.
SELECT
your TV
Setting up
Features
Using the TV’s
[
]
Appendix
Auto power off
The TV turns itself off automatically after approximately 15 minutes if
it is tuned to a vacant channel or a station that stops broadcasting for
the day.
Note: The auto power off feature does not work in VIDEO mode.
29
Page 30
Using the closed caption feature
The Closed Caption feature has two options:
• Captions—An on-screen display of the dialogue, narration, and
sound effects of programs and videos that are closed-captioned
(usually identified in TV listings as “CC”).
• Text—An on-screen display of information not related to the
program, such as weather or stock data (if available in your
viewing area).
To view captions or text:
1. Tune the TV to the desired program.
2. Press MENU, and then press
CAPTION menu.
3. Press
y or z to highlight CC.
CLOSED CAPTI0N
CC: C1 C2 C3 C4 T1
T2 T3 T4 [OFF]
[
MOVE
[
]
SELECT
]
x or • to highlight the CLOSED
RECALL MUTE
o
1
2
4
5
8
7
100
0
CH
MENU/
VOL VOL
ENTER
CH
TV
CABLE
VCR
EXIT
POWER
3
6
9
CH RTN
ENT
MENU
yz x •
Using the TV’s
Features
4. Press x or • to select the desired Closed Caption mode, as
follows:
• To view captions, select C1, C2, C3, or C4 (C1 displays
translation of the primary language in your area). Note: If the
program or video you selected is not closed-captioned, no
captions will display on-screen.
The top of the mountain is covered
with snow all the year round.
• To view text, select T1, T2, T3, or T4. Note: If text is not
available in your viewing area, a black rectangle may appear
on-screen. If this happens, set the Closed Caption feature to OFF.
WORLD WEATHER
LONDON
MOSCOW
PARIS
ROME
TOKYO
Temps
F
51
57
53
66
65
Current
Weather
C
Clear
11
Cloudy
14
Clear
12
Cloudy
19
Rain
18
Note:
A closed caption signal may not display in the
following situations:
• When a videotape has been dubbed
• When the signal reception is weak
• When the signal reception is non-
standard
• To turn off the Closed Caption feature, highlight OFF in the
Closed Caption menu.
30
Page 31
Adjusting the sound
Muting the sound
Press MUTE to temporarily turn off the sound. While the sound is off,
the screen displays the word “MUTE” in the lower right corner. To
restore the sound, press MUTE or VOL
When you press MUTE, the Closed Caption feature is automatically
activated. To deactivate captions and restore normal sound, press
MUTE again. This feature works only when the Closed Caption mode
is set to OFF. See “Using the closed captioned feature” on page 30 for
more information about closed caption settings.
Selecting stereo/SAP broadcasts
The multi-channel TV sound (MTS) feature provides high-fidelity
stereo sound. MTS also can transmit a second audio program (SAP)
containing a second language or other audio information.
Note: The MTS feature is not available in VIDEO mode.
In general, you can leave your TV in stereo mode because the TV
automatically outputs the type of sound being broadcast (stereo or
mono).
When the TV receives a stereo or SAP broadcast, the word “STEREO”
or “SAP” displays on-screen every time you turn on the TV, change the
channel, or press RECALL.
To listen to stereo sound:
1. Press MENU.
2. Press
3. Press
4. Press
x or • to highlight the AUDIO menu.
y or z to highlight MTS.
x or • to highlight STR (stereo).
Note: If the stereo sound is noisy, select MONO to reduce the
noise.
x •.
RECALL MUTE
o
1
4
7
100
CH
MENU/
VOL VOL
ENTER
CH
TV
CABLE
VCR
EXIT
2
5
8
0
POWER
3
6
9
CH RTN
ENT
MUTE
RECALL
MENU
yz x •
VOL x •
Toshiba
Welcome to
your TV
Connecting
Using the
Remote Control
your TV
Setting up
AUDIO
MTS: [STR] SAP MONO
BASS 50
TREBLE 50
BALANCE 0
SURROUND: [ON] OFF
AUDIO OUT: [FIXED] VARIABLE
MORE
MOVE
[
[
SELECT
]
]
To listen to a second audio program (SAP):
1. Press MENU.
2. Press
3. Press
4. Press
x or • to highlight the AUDIO menu.
y or z to highlight MTS.
x or • to highlight SAP. The TV speakers will output the
second audio program instead of normal audio.
Features
Using the TV’s
Appendix
31
Page 32
Adjusting the sound quality
TV
CABLE
VCR
MENU/
ENTER
CH RTN
RECALL MUTE
CH
CH
VOL VOL
1
4
7
2
5
8
3
6
9
0
ENT
100
POWER
o
EXIT
You can change the sound quality of your TV by adjusting the bass,
treble, and balance.
To adjust the sound quality:
1. Press MENU.
2. Press
3. Press
x or • to highlight the AUDIO menu.
y or z to highlight the quality you want to adjust (BASS,
TREBLE, or BALANCE).
4. Press
x or • to adjust the level:
x makes the sound quality weaker or decreases the balance in
•
the right channel, depending on the item selected.
• makes the sound quality stronger or decreases the balance in
•
the left channel, depending on the item selected.
AUDIO
MTS: [STR] SAP MONO
BASS 50
TREBLE 50
BALANCE 0
SURROUND: [ON] OFF
AUDIO OUT: [FIXED] VARIABLE
MORE
MOVE
]
ADJUST
–
[
][
+
Using the surround sound feature
The surround sound feature expands the audio listening field wider and
deeper to create exceptional sound quality from the TV speakers.
This feature uses stereo signals from a TV broadcast or video input.
Note:
To reset the audio adjustments (bass, treble,
and balance) to the factory settings, select
RESET in the PICTURE menu (see page 28).
MENU
Using the TV’s
Features
To turn on the surround sound feature:
1. Press MENU.
2. Press
3. If you have not already done so, select STEREO mode (press
4. Press
5. Press
x or • to highlight the AUDIO menu.
z to highlight MTS, and then press x or • to highlight STR).
y or z to highlight SURROUND.
x or • to highlight ON.
AUDIO
MTS: [STR] SAP MONO
BASS 50
TREBLE 50
BALANCE 0
SURROUND: [ON] OFF
AUDIO OUT: [FIXED] VARIABLE
MORE
MOVE
[
[
SELECT
]
]
y or
To turn off the surround sound feature:
Highlight OFF in step 5 above. Note: In general, you can leave the
surround sound feature on because the TV automatically outputs the
type of sound being broadcast (surround stereo or mono).
yz x •
32
Page 33
Selecting variable audio OUT
TV
CABLE
VCR
MENU/
ENTER
CH RTN
RECALL MUTE
CH
CH
VOL VOL
1
4
7
2
5
8
3
6
9
0
ENT
100
POWER
o
EXIT
If you connect external audio equipment (such as a stereo,
audio amplifier, or surround sound system) to the TV’s Audio OUT
jacks, you can use the AUDIO OUT feature to select either variable or
fixed audio output.
– If you set AUDIO OUT to VARIABLE, you can use the volume
controls on either the TV or the audio equipment to adjust the
sound output through the audio equipment.
– If you set AUDIO OUT to FIXED, you must use the volume
controls on the audio equipment to adjust the sound output
through the audio equipment (the TV’s volume setting will have
no effect).
Note: Fixed audio output provides a cleaner signal than variable audio
output.
See page 11 for details on connecting an audio amplifier to the TV’s
Audio OUT jacks.
To select variable audio output:
1. Press MENU.
2. Press
3. Press
4. Press
x or • to highlight the AUDIO menu.
y or z to highlight AUDIO OUT.
x or • to highlight VARIABLE.
MENU
yz x •
Toshiba
Welcome to
your TV
Connecting
Using the
Remote Control
AUDIO
MTS: [STR] SAP MONO
BASS 50
TREBLE 50
BALANCE 0
SURROUND: [ON] OFF
AUDIO OUT: FIXED [VARIABLE]
MORE
MOVE
[
[
SELECT
]
]
To select fixed audio output:
1. Highlight FIXED in step 4 above.
Turning off the built-in speakers
You can use this feature to turn off the TV’s built-in speakers when
you connect external speakers to your TV (see “Connecting an audio
amplifier” on page 11).
To turn off the built-in speakers:
1. Press MENU.
2. Press
3. Press
4. Press
x or • to highlight the AUDIO menu.
y or z to highlight SPEAKERS.
x or • to highlight OFF.
AUDIO
MORE
SPEAKERS: ON [OFF]
SBS: [ON] OFF
SBS LEVEL: 50
your TV
Setting up
Features
Using the TV’s
Appendix
To turn on the built-in speakers:
1. Highlight ON in step 4 above.
MOVE
[
[
]
SELECT
]
33
Page 34
Using the sub-bass system (SBS)
The sub-bass system (SBS) allows you to enhance bass performance,
even when the volume is low.
To turn on (or off) the sub-bass system:
1. Press MENU.
2. Press
3. Press
4. Press
x or • to highlight the AUDIO menu.
y or z to highlight SBS.
x or • to highlight ON (or OFF).
AUDIO
MORE
SPEAKERS: [ON] OFF
SBS: [ON] OFF
SBS LEVEL: 50
RECALL MUTE
o
1
2
4
5
8
7
100
0
CH
MENU/
VOL VOL
ENTER
POWER
POWER
RECALL
3
6
9
CH RTN
ENT
MENU
yz x •
Using the TV’s
Features
[
MOVE
[
]
SELECT
]
To adjust the SBS level:
1. Turn on the sub-bass system, as instructed above.
2. Press MENU.
3. Press
4. Press
5. Press
x or • to highlight the AUDIO menu.
y or z to highlight SBS LEVEL.
x or • to adjust the SBS level.
AUDIO
MORE
SPEAKERS: [ON] OFF
SBS: [ON] OFF
SBS LEVEL: 50
[
MOVE
–
[
]
ADJUST
+
]
Viewing the demonstration (DEMO) mode
The demonstration (DEMO) mode will demonstrate several features
of your TV.
To start the demo:
Press DEMO on the TV front panel.
To start the demo using the menu system:
1. Press MENU.
2. Press
3. Press
4. Press
4. Press MENU to start the demo.
To stop the demo:
x or • to highlight the SET UP menu.
y or z to highlight DEMO.
x or • to highlight START.
Press RECALL, EXIT, or POWER.
SET UP
MORE
DEMO [START] STOP
IMAGE TILT
[
MOVE SELECT
[
]
]
CH
TV
CABLE
VCR
EXIT
TV Front Panel
Demo
DEMO MENU TV/VIDEO VOLUME CHANNEL
EXIT
POWER
Understanding the last mode memory feature
If the power is cut off while you are viewing the TV, the Last Mode
Memory feature turns on the TV automatically when the power is
resupplied.
If the power is going to be off for a long time and you are going to
be away from your TV, unplug the power cord to prevent the TV
from turning on in your absence.
34
Page 35
Appendix
Troubleshooting
Before calling a service technician, please check the following table for possible causes of the problem and
some solutions.
Problem Solution
TV will not turn on • Make sure the power cord is plugged in, and then press POWER.
• The remote control batteries may be dead. Replace the batteries or
press the POWER button on the TV.
No picture, no sound • Check the antenna/cable connections.
Toshiba
Welcome to
your TV
Connecting
No sound, picture OK • The sound may be muted. Press MUTE or VOLUME
• The station may have broadcast difficulties. Try another channel.
Poor sound, picture OK • The station may have broadcast difficulties. Try another channel.
Poor picture, sound OK • Check the antenna connections.
• The station may have broadcast difficulties. Try another channel.
• Adjust the PICTURE menu.
Poor reception of broadcast channels • Check the antenna connections.
• The station may have broadcast difficulties. Try another channel.
• If you are using a VCR, make sure the TV/VCR button is set
correctly.
Cannot receive above channel 13 • Make sure the TV/CABLE feature in the SET UP menu is set to TV.
Unable to select a certain channel • The channel may be locked out with the Block Channel feature
(SET UP/V-Chip Control menu), or erased with the Add/Erase
feature (SET UP menu).
Black box on screen • Set the CLOSED CAPTION feature to OFF.
Multiple images • The station may have broadcast difficulties. Try another channel.
• Use a highly directional outdoor antenna.
Poor color or no color • The station may have broadcast difficulties. Try another channel.
• Adjust the TINT and/or COLOR in the PICTURE menu.
• If you change the direction of the TV while it is turned on, the
picture could suffer from color shading. If so, turn the TV off and
allow it to cool down for several hours before turning it on again.
y z.
Using the
Remote Control
your TV
Setting up
Features
Using the TV’s
No stereo or SAP sound from a • Make sure the MTS feature is set properly (AUDIO menu).
known MTS broadcast
The remote control does not operate • Make sure the TV/CABLE/VCR switch is set properly.
• There may be an obstruction between the remote control and the
remote control sensor on the TV.
• The remote control batteries may be dead. Replace the batteries.
The V-Chip PIN code does not work • Change or reset the PIN code.
35
Appendix
Page 36
Specifications
Television system NTSC standard
Channel coverage VHF: 2 through 13
UHF: 14 through 69
Cable TV: Mid band (A-8 through A-1, A through 1)
Super band (J through W)
Hyper band (AA through ZZ, AAA, BBB)
Ultra band (65 through 94, 100 through 125)
Power source 120 AC, 60 Hz
Power consumption (average) 112 W (average)
Audio power 5 W + 5 W
Speaker type 2-3/8 x 4-3/4 inches (60 x 120 mm)
®
Video/Audio terminals ColorStream
Y: 1V (p-p), 75 ohm
C
R (PR): 0.7 V (p-p), 75 ohm
C
B (PB): 0.7 V (p-p), 75 ohm
S-VIDEO INPUT
Y-INPUT: 1 V (p-p), 75 ohm, negative sync.
C-INPUT: 0.286 V (p-p) (burst signal), 75 ohm
VIDEO/AUDIO INPUT
VIDEO: 1 V (p-p), 75 ohm, negative sync.
AUDIO: 150 mV (rms) (30% modulation equivalent, 47 k ohm)
VIDEO/AUDIO OUTPUT
VIDEO: 1 V (p-p), 75 ohm, negative sync.
AUDIO: 150 mV (rms) (30% modulation equivalent, 47 k ohm)
(component video) INPUT
Appendix
Dimensions Width: 34-1/2 inches (876 mm)
Height: 26-9/16 inches (675 mm)
Depth: 22-5/8 inches (575 mm)
Weight: 150 lbs (68 kg)
Supplied accessories Remote control with two size “AA” batteries
Design and specifications are subject to change without notice.
36
Page 37
Limited United States Warranty
for 27'' FST PURE® and All Larger Television Models
Toshiba America Consumer Products, Inc. (“TACP”) and Toshiba
Hawaii, Inc. (“THI”) make the following limited warranties to original
consumers in the United States. THESE LIMITED WARRANTIES
EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR
ANY PERSON RECEIVING THIS TELEVISION AS A GIFT FROM
THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER
PURCHASER OR TRANSFEREE.
PRODUCTS PURCHASED IN THE U.S.A. AND USED IN
CANADA ARE NOT COVERED BY THESE WARRANTIES.
PRODUCTS PURCHASED IN CANADA AND USED IN THE
U.S.A. ARE NOT COVERED BY THESE WARRANTIES.
(4) Labor service charges for set installation, setup, adjustment of
customer controls, and installation or repair of antenna systems
are not covered by these warranties. Reception problems
caused by inadequate antenna systems are your responsibility.
(5) Warranties extend only to defects in materials or workmanship
as limited above and do not extend to any television or parts that
have been lost or discarded by you or to damage to television or
parts caused by misuse, accident, Acts of God (such as lightning
or fluctuations in electric power), improper installation, improper
maintenance, or use in violation of instructions furnished by
TACP/THI; or to units that have been modified or had the serial
number removed, altered, defaced, or rendered illegible.
Toshiba
Welcome to
your TV
Connecting
Limited One (1) Year Warranty on Parts and Labor*
TACP/THI warrant this television and its parts against defects in
materials or workmanship for a period of one (1) year after the date
of original retail purchase. DURING THIS PERIOD, TACP/THI
WILL, AT TACP/THI’S OPTION, REPAIR OR REPLACE A
DEFECTIVE PART WITH A NEW OR REFURBISHED PART
WITHOUT CHARGE TO YOU FOR PARTS OR LABOR. TACP/THI
Authorized Service Station personnel will come to your home
when warranty service is required. Depending on the type of repair
required, either the service will be performed in your home or the
set will be taken to the TACP/THI Authorized Service Station for
repair and returned to your home at no cost to you.
Limited Two (2) Year Warranty on Picture Tube*
TACP/THI further warrant the picture tube in this television against
defects in materials or workmanship for a period of two (2) years
after the date of original retail purchase. DURING THIS PERIOD,
TACP/THI WILL, AT TACP/THI’S OPTION, REPAIR OR REPLACE
A DEFECTIVE PICTURE TUBE WITH A NEW OR REFURBISHED
PICTURE TUBE WITHOUT CHARGE TO YOU, EXCEPT THAT, IF
ADEFECTIVE PICTURE TUBE IS REPAIRED OR REPLACED
AFTER ONE (1) YEAR FROM THE DATE OF THE ORIGINAL
RETAIL PURCHASE, YOU PAY LABOR CHARGES INVOLVED
IN THE REPAIR OR REPLACEMENT.
Rental Units
The warranty for rental units begins with the date of first rental
or thirty (30) days from the date of shipment to the rental firm,
whichever comes first.
*Commercial Units
Televisions sold and used for commercial purposes have a limited
ninety (90) day warranty for all parts, labor, and picture tubes.
Owner’s Manual and Product Registration Card
Read this owner’s manual thoroughly before operating this television.
Complete and mail the enclosed product registration card within ten
days after you, or the person who has given you this product as a
gift, purchased this television. Returning the product registration
card will enable TACP/THI to provide you with better customer
service and improved product support. Failure to return the product
registration card will not affect your rights under this warranty.
Your Responsibility
THE ABOVE WARRANTIES ARE SUBJECT TO THE FOLLOWING
CONDITIONS:
(1) You must provide your bill of sale or other proof of purchase.
(2) All warranty servicing of this television must be made by an
Authorized TACP/THI Service Station.
(3) The warranties from TACP and THI are effective only if the
television is purchased and operated in the U.S.A. or Puerto
Rico.
How to Obtain Warranty Services
If, after following all of the operating instructions in this manual
and checking the “Troubleshooting” section, you find that service
is needed:
(1) To find the nearest TACP/THI Authorized Service Station:
For televisions purchased in the United States, except Hawaii,
visit TACP’s web site at www.toshiba.com/tacp, or call toll
free 1-800-631-3811.
For televisions purchased in Hawaii, contact Toshiba Hawaii, Inc.,
327 Kamakee Street, Honolulu, HI 96814, (808) 591-9281.
(2) Present your bill of sale or other proof of purchase to the
Authorized Service Station. Authorized TACP/THI Service Station
personnel will come to your home when warranty service is
required. Depending on the type of repair required, either the
service will be performed in your home or the set will be taken to
the Authorized Service Station for repair and returned to your
home at no cost to you.
For additional information, visit TACP’s web site:
ALL WARRANTIES IMPLIED BY THE LAW OF ANY STATE
OF THE U.S.A., INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE EXPRESSLY LIMITED TO THE DURATION OF
THE LIMITED WARRANTIES SET FORTH ABOVE. WITH THE
EXCEPTION OF ANY WARRANTIES IMPLIED BY THE LAW
OF ANY STATE OF THE U.S.A. AS HEREBY LIMITED, THE
FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL
OTHER WARRANTIES, GUARANTEES, AGREEMENTS, AND
SIMILAR OBLIGATIONS OF TACP OR THI WITH RESPECT TO
THE REPAIR OR REPLACEMENT OF ANY PARTS. IN NO EVENT
SHALL TACP OR THI BE LIABLE FOR CONSEQUENTIAL OR
INCIDENTAL DAMAGES.
No person, agent, distributor, dealer, or company is authorized
to change, modify, or extend the terms of these warranties in
any manner whatsoever. The time within which action must be
commenced to enforce any obligation of TACP or THI arising under
this warranty or under any law of the United States or of any state
thereof is hereby limited to 90 days from the date you discover, or
should have discovered, the defect. This limitation does not apply to
implied warranties arising under the law of any state of the U.S.A.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND
YOU MAY ALSO HAVE OTHER RIGHTS, WHICH MAY VARY
FROM STATE TO STATE IN THE U.S.A. SOME STATES OF THE
U.S.A. DO NOT ALLOW LIMITATIONS ON THE DURATION OF
AN IMPLIED WARRANTY, LIMITATIONS ON THE TIME WITHIN
WHICH AN ACTION MAY BE BROUGHT, OR THE EXCLUSION
OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES; THEREFORE, THE ABOVE LIMITATIONS OR
EXCLUSIONS MAY NOT APPLY TO YOU UNDER SUCH
CIRCUMSTANCES.
FST PURE® is a registered trademark of Toshiba America Consumer Products, Inc.
www.toshiba.com/tacp.
REV. MAR02
Using the
Remote Control
your TV
Setting up
Features
Using the TV’s
Appendix
37
Page 38
Limited Canada Warranty
for 27'' FST PURE® and All Larger Television Models
Toshiba of Canada Limited (“TCL”) makes the following limited
warranties to original consumers in Canada.
THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL
CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS
TELEVISION AS A GIFT FROM THE ORIGINAL CONSUMER
PURCHASER AND TO NO OTHER PURCHASER OR
TRANSFEREE.
PRODUCTS PURCHASED IN THE U.S.A. AND USED IN
CANADA ARE NOT COVERED BY THESE WARRANTIES.
PRODUCTS PURCHASED IN CANADA AND USED IN THE
U.S.A. ARE NOT COVERED BY THESE WARRANTIES.
Limited One (1) Year Warranty on Parts and Labor*
TCL warrants this television and its parts against defects in materials
or workmanship for a period of one (1) year after the date of original
retail purchase. DURING THIS PERIOD, TCL WILL, AT TCL’S
OPTION, REPAIR OR REPLACE A DEFECTIVE PART WITH A
NEW OR REFURBISHED PART WITHOUT CHARGE TO YOU
FOR PARTS OR LABOR. TCL Authorized Service Depot personnel
will come to your home when warranty service is required.
Depending on the type of repair required, either the service will
be performed in your home or the set will be taken to the TCL
Authorized Service Depot for repair and returned to your home at
no cost to you. IN-HOME SERVICE ONLY APPLIES WITHIN 100
KILOMETERS OF AN AUTHORIZED TCL SERVICE DEPOT.
Limited Two (2) Year Warranty on Picture Tube*
TCL further warrants the picture tube in this television against
defects in materials or workmanship for a period of two (2) years
after the date of original retail purchase. DURING THIS PERIOD,
TCL WILL, AT TCL’S OPTION, REPAIR OR REPLACE A
DEFECTIVE PICTURE TUBE WITH A NEW OR REFURBISHED
PICTURE TUBE WITHOUT CHARGE TO YOU, EXCEPT THAT,
IFADEFECTIVE PICTURE TUBE IS REPAIRED OR REPLACED
AFTER ONE (1) YEAR FROM THE DATE OF THE ORIGINAL
RETAIL PURCHASE, YOU PAY LABOR CHARGES INVOLVED
IN THE REPAIR OR REPLACEMENT.
Rental Units
The warranty for rental units begins with the date of first rental or
thirty (30) days from the date of shipment to the rental firm,
whichever comes first.
*Commercial Units
Televisions sold and used for commercial purposes have a limited
ninety (90) day warranty for all parts, labor, and picture tubes.
Owner’s Manual
Read this owner’s manual thoroughly before operating this television.
Appendix
Your Responsibility
THE ABOVE WARRANTIES ARE SUBJECT TO THE FOLLOWING
CONDITIONS:
(1) You must provide your bill of sale or other proof of purchase.
(2) All warranty servicing of this television must be made by an
(3) The warranties from TCL are effective only if the television is
Authorized TCL Service Depot.
purchased in Canada from an authorized TCL dealer and
operated in Canada.
(4) Labor service charges for set installation, setup, adjustment of
customer controls, and installation or repair of antenna systems
are not covered by these warranties. Reception problems
caused by inadequate antenna systems are your responsibility.
(5) Warranties extend only to defects in materials or workmanship
as limited above and do not extend to any television or parts that
have been lost or discarded by you or to damage to television or
parts caused by misuse, accident, Acts of God (such as lightning
or fluctuations in electric power), improper installation, improper
maintenance, or use in violation of instructions furnished by TCL;
or to units that have been modified or had the serial number
removed, altered, defaced, or rendered illegible.
How to Obtain Warranty Services
If, after following all of the operating instructions in this manual and
checking the “Troubleshooting” section, you find that service is
needed:
(1) To find the nearest TCL Authorized Service Depot, visit TCL’s
web site: www.toshiba.ca.
(2) Present your bill of sale or other proof of purchase to the
Authorized Service Depot. Authorized TCL Service Depot
personnel will come to your home when warranty service is
required. Depending on the type of repair required, either the
service will be performed in your home or the set will be taken
to the Authorized Service Depot for repair and returned to your
home at no cost to you. IN-HOME SERVICE ONLY APPLIES
WITHIN 100 KILOMETERS OF AN AUTHORIZED TCL
SERVICE DEPOT.
For additional information, visit TCL’s web site:
ALL WARRANTIES IMPLIED BY THE LAW OF ANY PROVINCE
OF CANADA, INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE EXPRESSLY LIMITED TO THE DURATION OF
THE LIMITED WARRANTIES SET FORTH ABOVE. WITH THE
EXCEPTION OF ANY WARRANTIES IMPLIED BY THE LAW
OF ANY PROVINCE OF CANADA AS HEREBY LIMITED, THE
FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL
OTHER WARRANTIES, GUARANTEES, AGREEMENTS, AND
SIMILAR OBLIGATIONS OF TCL WITH RESPECT TO THE
REPAIR OR REPLACEMENT OF ANY PARTS. IN NO EVENT
SHALL TCL BE LIABLE FOR CONSEQUENTIAL OR
INCIDENTAL DAMAGES.
No person, agent, distributor, dealer, or company is authorized
to change, modify, or extend the terms of these warranties in
any manner whatsoever. The time within which action must be
commenced to enforce any obligation of TCL arising under this
warranty or under any law of Canada or of any province thereof,
is hereby limited to 90 days from the date you discover, or should
have discovered, the defect. This limitation does not apply to implied
warranties arising under the law of any province of Canada.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS,
ANDYOU MAY ALSO HAVE OTHER RIGHTS, WHICH MAY
VARY FROM PROVINCE TO PROVINCE IN CANADA. SOME
PROVINCES OF CANADA DO NOT ALLOW LIMITATIONS ON
THE DURATION OF AN IMPLIED WARRANTY, LIMITATIONS
ON THE TIME WITHIN WHICH AN ACTION MAY BE BROUGHT,
OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES; THEREFORE, THE ABOVE
LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU
UNDER SUCH CIRCUMSTANCES.
FST PURE® is a registered trademark of Toshiba America Consumer Products, Inc.
www.toshiba.ca
REV. MAR02
38
Page 39
Notes
39
Page 40
TOSHIBA AMERICA CONSUMER PRODUCTS, INC.
HEAD OFFICE: 82 TOTOWA ROAD, WAYNE, NJ 07470, U.S.A.
NATIONAL SERVICE DIVISION: 1420-B TOSHIBA DRIVE, LEBANON, TN 37087, U.S.A.
TOSHIBA HAWAII, INC.
HEAD OFFICE: 327 KAMAKEE STREET, HONOLULU, HI 96814, U.S.A. — TEL: (808) 591-9281
TOSHIBA OF CANADA LTD.
HEAD OFFICE: 191 McNABB STREET, MARKHAM, ONTARIO, L3R 8H2, CANADA — TEL: (905) 470-5400
SERVICE CENTERS:
TORONTO: 191 McNABB STREET, MARKHAM, ONTARIO, L3R 8H2, CANADA — TEL: (905) 470-5400
MONTREAL: 1643 NORTH SERVICE RD., TRANS-CANADA HIGHWAY, DORVAL QUEBEC, H9P 1J1, CANADA — TEL: (514) 856-4100
VANCOUVER: 22171 FRASERWOOD WAY, RICHMOND, B.C., V6W 1J5, CANADA — TEL: (604) 303-2500
MANUFACTURED BY
TOSHIBA AMERICA CONSUMER PRODUCTS, INC.
ColorStream is a registered trademark of Toshiba America Consumer Products, Inc.
PRINTED IN USA
(03-05) R
Loading...