Toshiba 3040C, 306SE, 4540C, 5540C, 506SE User Manual

...
MULTIFUNCTIONAL DIGITAL COLOR SYSTEMS / MULTIFUNCTIONAL DIGITAL SYSTEMS
Network Fax Guide
©2012 TOSHIBA TEC CORPORATION All rights reserved Under the copyright laws, this manual cannot be reproduced in any form without prior written permission of TTEC.

Preface

Thank you for purchasing TOSHIBA Multifunctional Digital Systems or Multifunctional Digital Color Systems. This manual explains the instructions for the N/W-Fax driver. Read this manual before using your Multifunctional Digital Systems or Multifunctional Digital Color Systems. Keep this manual within easy reach, and use it to configure an environment that makes best use of the e-STUDIO’s functions.
To use this function, the scanning function (Internet Fax) and printing function (Network Fax) are required.

How to read this manual

Symbols in this manual

In this manual, some important items are described with the symbols shown below. Be sure to read these items before using this equipment.
Indicates a potentially hazardous situation which, if not avoided, could result in death, serious injury, or serious damage, or fire in the equipment or surrounding objects.
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury, partial damage to the equipment or surrounding objects, or loss of data.
Indicates information to which you should pay attention when operating the equipment.
Other than the above, this manual also describes information that may be useful for the operation of this equipment with the following signage:
Describes handy information that is useful to know when operating the equipment.
Pages describing items related to what you are currently doing. See these pages as required.

Model and series names in this manual

In this manual, each model name is replaced with the series name as shown below.
Model name Series name in this manual
e-STUDIO5540C/6540C/6550C e-STUDIO6550C Series
e-STUDIO2040C/2540C/3040C/3540C/4540C e-STUDIO4540C Series
e-STUDIO206L/256/306/356/456/506 e-STUDIO256SE/306SE/356SE/456SE/506SE
e-STUDIO556/656/756/856 e-STUDIO556SE/656SE/756SE/856SE
e-STUDIO2050C/2550C e-STUDIO2550C Series
e-STUDIO2051C/2551C e-STUDIO2551C Series
e-STUDIO456 Series
e-STUDIO856 Series

Options

For the available options, refer to “Options” in the Quick Start Guide for your equipment.

Screens and Operation Procedures

y In this manual, the screens and the operation procedures in Windows are described for Windows 7.
The details on the screens may differ depending on how the equipment is used, such as the status of the installed options, the OS version and the applications.
y If you use Windows Server 2008 R2, refer to the operation procedure for Windows 7, though the screens or the menu
names, etc. may differ.
y The illustration screens used in this manual are for paper in the A/B format. If you use paper in the LT format, the
display or the order of buttons in the illustrations may differ from that of your equipment.
y In this manual, the initial values of the setting items are underlined.
Preface 1

Trademarks

y The official name of Windows XP is Microsoft Windows XP Operating System. y The official name of Windows Vista is Microsoft Windows Vista Operating System. y The official name of Windows 7 is Microsoft Windows 7 Operating System. y The official name of Windows Server 2003 is Microsoft Windows Server 2003 Operating System. y The official name of Windows Server 2008 is Microsoft Windows Server 2008 Operating System. y Microsoft, Windows, Windows NT, and the brand names and product names of other Microsoft products are
trademarks of Microsoft Corporation in the US and other countries.
y Apple, AppleTalk, Macintosh, Mac, Mac OS, Safari, and TrueType are trademarks of Apple Inc. in the US and other
countries.
y Adobe, Acrobat, Reader, and PostScript are either registered trademarks or trademarks of Adobe Systems
Incorporated in the United States and/or other countries.
y Mozilla, Firefox and the Firefox logo are trademarks or registered trademarks of Mozilla Foundation in the U.S. and
other countries.
y IBM, AT and AIX are trademarks of International Business Machines Corporation. y NOVELL, NetWare, and NDS are trademarks of Novell, Inc. y TopAccess is a trademark of Toshiba Tec Corporation. y Other company and product names given in this manual or displayed in this software may be the trademarks of their
respective companies.
2 Preface

End User Software License Agreement

INSTALLING OR OTHERWISE USING THIS SOFTWARE PRODUCT CONSTITUTES YOUR ACCEPTANCE OF THE FOLLOWING TERMS AND CONDITIONS (UNLESS A SEPARATE LICENSE IS PROVIDED BY THE SUPPLIER OF APPLICABLE SOFTWARE IN WHICH CASE SUCH SEPARATE LICENSE SHALL APPLY). IF YOU DO NOT ACCEPT THESE TERMS, YOU MAY NOT INSTALL OR USE THIS SOFTWARE, AND YOU MUST PROMPTLY RETURN THE SOFTWARE TO THE LOCATION WHERE YOU OBTAINED IT.
Grant of License:
This is a legal agreement between you, the end-user (“You”), and TOSHIBA TEC Corporation (“TTEC”). This software, fonts (including their typefaces) and related documentation (“Software”) is licensed for use with the system CPU on which it was installed (“System”) in accordance with the terms contained in this Agreement. This Software is proprietary to TTEC. TTEC disclaim responsibility for the installation and/or use of this Software, and for the results obtained by using this Software. You may use one copy of the Software as installed on a single System, and may not copy the Software for any reason except as necessary to use the Software on a single System. Any copies of the Software shall be subject to the conditions of this Agreement. You may not, nor cause or permit any third party to, modify, adapt, merge, translate, reverse compile, reverse assemble, or reverse engineer the Software. You may not use the Software, except in accordance with this license. No title to the intellectual property in the Software is transferred to you and full ownership is retained by TTEC. Source code of the Software is not licensed to you. You may not perform modification, deletion, etc. about copyright notice of the Software (including in duplicate).You will be held legally responsible for any copyright infringement, unauthorized transfer, reproduction or use of the Software or its documentation.
Term:
This license is effective until terminated by TTEC or upon your failure to comply with any term of this Agreement. Upon termination, you agree to destroy all copies of the Software and its documentation. You may terminate this license at any time by destroying the Software and its documentation and all copies.
Disclaimer of Warranty:
This Software is provided “AS IS” without warranty of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability, fitness for a particular purpose, title, and non-infringement. TTEC disclaim any warranty relating to the quality and performance of the Software. If the Software proves defective, You (and not TTEC) shall be responsible for the entire cost of all necessary servicing, repair or correction. TTEC do not warrant that the functions contained in the Software will meet your requirements or that the operation of the Software will be uninterrupted or error free.
Limitation of Liability:
IN NO EVENT WILL TTEC BE LIABLE TO YOU FOR ANY DAMAGES, WHETHER IN CONTRACT, TORT, OR OTHERWISE (except personal injury or death resulting from negligence on the part of TTEC), INCLUDING WITHOUT LIMITATION ANY LOST PROFITS, LOST DATA, LOST SAVINGS OR OTHER INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE SOFTWARE, EVEN IF TTEC OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, NOR FOR THIRD PARTY CLAIMS.
U.S. Government Restricted Rights:
The Software is provided with RESTRICTED RIGHTS. Use, duplication or disclosure by the U.S. Government is subject to restrictions set forth in subdivision (b) (3) (ii) or (c) (i) (ii) of the Rights in Technical Data and Computer Software Clause set forth in 252.227-7013, or 52.227-19 (c) (2) of the DOD FAR, as appropriate. Contractor/Manufacturer is TOSHIBA TEC Corporation, 2-17-2, Higashigotanda, Shinagawa-ku, Tokyo, 141-8664, Japan
General:
You may not sublicense, lease, rent, assign or transfer this license or the Software. Any attempt to sublicense, lease, rent, assign or transfer any of the rights, duties or obligations hereunder is void. You agree that you do not intend to, and will not ship, transmit (directly or indirectly) the Software, including any copies of the Software, or any technical data contained in the Software or its media, or any direct product thereof, to any country or destination prohibited by the United States Government. This license shall be governed by the laws of Japan or, at the election of a Supplier of TTEC concerned with a dispute arising from or relating to this Agreement, the laws of the Country designated from time to time by the relevant Supplier of TTEC. If any provision or portion of this Agreement shall be found to be illegal, invalid or unenforceable, the remaining provisions or portions shall remain in full force and effect. YOU ACKNOWLEDGE THAT YOU HAVE READ THIS LICENSE AGREEMENT AND THAT YOU UNDERSTAND ITS PROVISIONS. YOU AGREE TO BE BOUND BY ITS TERMS AND CONDITIONS. YOU FURTHER AGREE THAT THIS LICENSE AGREEMENT CONTAINS THE COMPLETE AND EXCLUSIVE AGREEMENT BETWEEN YOU AND TTEC AND ITS SUPPLIERS AND SUPERSEDES ANY PROPOSAL OR PRIOR AGREEMENT, ORAL OR WRITTEN, OR ANY OTHER COMMUNICATION RELATING TO THE SUBJECT MATTER OF THIS LICENSE AGREEMENT.
TOSHIBA TEC Corporation, 2-17-2, Higashigotanda, Shinagawa-ku, Tokyo, 141-8664, Japan
End User Software License Agreement 3

CONTENTS

Preface....................................................................................................................................... 1
End User Software License Agreement ................................................................................. 3
Chapter 1 OVERVIEW
Features and Functions ........................................................................................................... 8
Chapter 2 SENDING A FAX
Basic Procedure ..................................................................................................................... 10
Specifying Recipients ............................................................................................................ 14
Entering recipients from the keyboard................................................................................. 14
Selecting recipients from the address book......................................................................... 16
Selecting recipients from the address book (Search option)............................................... 18
Removing recipients ............................................................................................................ 22
Chapter 3 SETTING OPTIONS
How To Setup.......................................................................................................................... 24
Setting Initial Values of the N/W-Fax driver options ............................................................ 24
Setting print options for each print job ................................................................................. 24
Setting up the N/W-Fax Driver Options ................................................................................ 25
Setting up the [Layout] tab .................................................................................................. 25
Setting up the [Send] tab ..................................................................................................... 26
Setting up the Cover Sheet ................................................................................................. 28
Setting up the SNMP ........................................................................................................... 29
Setting up the [Device Settings] tab .................................................................................... 31
Setting up LDAP servers ..................................................................................................... 32
Sending With Extended Fax Functionality........................................................................... 33
Saving a fax as a file ........................................................................................................... 33
Delayed transmission .......................................................................................................... 34
Sending with a cover sheet ................................................................................................. 35
Chapter 4 APPENDIX
Cover Sheet Samples.............................................................................................................42
Standard cover page ........................................................................................................... 42
Business cover page ........................................................................................................... 43
Professional cover page ...................................................................................................... 44
INDEX ..................................................................................................................................................................... 45
CONTENTS 5
6 CONTENTS

1.OVERVIEW

This chapter provides an overview of the Network Fax features.
Features and Functions........................................................................................................... 8
1 OVERVIEW

Features and Functions

This equipment provides the network fax features, which simplify and facilitate your office facsimile needs and enables you to send fax or Internet Fax digital documents directly from your desktop.
y Fax transmission using the N/W-Fax driver is available only when the optional Fax unit is installed. y Please enable the SNMP setting on TopAccess to use the N/W-Fax functions. In addition, the N/W-Fax driver does
not work if the SNMP setting on TopAccess is disabled when the optional Fax unit is installed.
The highly intuitive, network N/W-Fax driver software enables you to select the fax printer driver to electronically fax or Internet Fax from your computer to one or more recipients. You can easily define fax job properties from the send list to fax resolutions. The N/W-Fax driver is complimented with the AddressBook Viewer. The combination of applications enables you easily to manage a selection of fax recipients and access to the address book.
The N/W-Fax driver enables you to set up send lists and send electronic documents from your PC to one or more destinations. You send to the fax in much the same way you would choose to print to a designated printer that makes using the N/W-Fax driver quick and simple. You can select the fax properties. Fax properties are the attributes you can set to define sender and recipient information for processing fax jobs such as dialing options, sender information, fax resolution and page layout. Other features include an easy-to-use fax scheduler that allows you to set up a date and time to transmit your fax. Cover page options are also provided. You can include a customized cover page with your fax transmission that can contain sender and recipient fax information and a detailed message. You can easily maintain sender and contact information that can be printed on the cover pages.
Faxing hard-copy documents must be performed from the touch panel display.
y The image quality of the originals that are sent by the N/W-Fax driver is different from the originals that are sent by
the general fax operation.
y If you specify the Email addresses as the recipients using the N/W-Fax driver, the document will be sent as an
Internet Fax. The Internet Fax feature allows users to send originals the same as the fax features. However, an Internet Fax is sent through the Internet, although a fax is sent through the public switched telephone line. In order to send an Internet Fax, the remote device also must support the Internet Fax feature. For more details about the Internet Fax, refer to the Scanning Guide.
8 Features and Functions

2.SENDING A FAX

This chapter describes how to send a fax using a N/W-Fax driver.
Basic Procedure.....................................................................................................................10
Specifying Recipients............................................................................................................14
Entering recipients from the keyboard..................................................................................................................14
Selecting recipients from the address book..........................................................................................................16
Selecting recipients from the address book (Search option) ................................................................................18
Removing recipients.............................................................................................................................................22
2 SENDING A FAX

Basic Procedure

The basic procedure for sending a fax (Network Fax / Internet Fax) is as follows. You can use standard functions or set optional functions as well as the basic ones described in this section. For these operations, see the following section. P.23 “SETTING OPTIONS”
Start the application software and prepare the document to be sent.
1
Select [Print] from the [File] menu in the application software.
2
The procedure for displaying the print dialog box may differ from the above depending on the application software.
Select [TOSHIBA e-STUDIO Fax] for the printer and click [Preferences].
3
The dialog box of the N/W-Fax driver properties appears.
Note that the command name to open the driver properties may differ from [Preferences] depending on the application software.
10 Basic Procedure
2.SENDING A FAX
Click the [Send] tab and specify the recipients.
4
2 SENDING A FAX
y To specify recipients, enter them with the keyboard or select them from the address book.
P.14 “Specifying Recipients”
y On the [Send] tab, you can set the resolution of a fax cover sheet, etc. as well as specifying the recipients.
P.26 “Setting up the [Send] tab”
y On the [Layout] tab, you can set the size and the orientation of the paper.
P.25 “Setting up the [Layout] tab”
y On the [Cover Sheet] and [Sender Information Properties] tab, the sender information for adding a fax cover
sheet can be set.
P.28 “Setting up the Cover Sheet” P.29 “Setting up the SNMP”
Click [OK].
5
The transmission settings are determined and the N/W-Fax driver properties dialog box is closed.
Basic Procedure 11
2 SENDING A FAX
Click [Print] in the print dialog box on the application software.
6
A fax starts being sent.
y Note that the command name to print a document (send a fax) may differ from [Print] depending on the
application software.
y A waiting fax job can be checked or deleted through the managing jobs function in TopAccess. A sent fax
job can also be checked through the displaying job logs function in TopAccess. For details, refer to the TopAccess Guide.
Cautionary points when LDAP authentication is used
When LDAP authentication is enabled on this equipment, you must specify an LDAP server in the [Server Name] box on the [Send] tab before sending a fax.
If you attempt to send a fax without specifying an LDAP server, the [Specify LDAP Server] dialog box will appear to ask you to do so.
12 Basic Procedure
2.SENDING A FAX
In this case, specify the desired LDAP server in the [Server Name] box and click [OK] to send the fax.
You can make settings for LDAP authentication on the [Device Settings] tab. P.31 “Setting up the [Device Settings] tab”
2 SENDING A FAX
Basic Procedure 13
Loading...
+ 35 hidden pages