Toshiba 23HLV84 User Manual

ENER Y STAR PARTNER

Introduction

your TV/DVD

Connecting

your TV/DVD

Setting up

TV/DVD’s Features

Using the

DVD Playback

Appendix

23HLV84

J5P00101A(E)Cover 8/12/04, 2:21 PM1

IMPORTANT SAFEGUARDS

Introduction

Always read and understand the PRODUCT WARNINGS and USER DIRECTIONS that are contained in this manual before

attempting to use your television, to help ensure its safe use. Always store this manual near your television for convenient future

reference.

Dear Customer,

Thank you very much for purchasing this Toshiba television. You must carefully read and understand all of the safety instructions

contained in this manual before you attempt to use this product in order to avoid potential hazards that could cause bodily injury or property damage or could damage your Television.

We hope that you are completely satisfied with your Toshiba television and that it will give you long and enjoyable service. We look forward to providing you with additional Toshiba products to serve all of your entertainment needs in the future.

Safety Precautions

WARNING: TO REDUCE THE RISK OF FIRE OR

ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK!

DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle, is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING: Handling the cord on this product or cords

associated with accessories sold with this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling.

NOTE TO CATV INSTALLERS

This is a reminder to call the CATV system installer’s attention to Article 820-40 of the NEC, which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to grounding system of the building, as close to the point of cable entry as practical. For additional antenna grounding information, see item 17 on page 4.

Child Safety

It Makes A Difference Where Your TV Stands

Congratulations on your purchase! As you enjoy your new TV, keep these safety tips in mind:

The Issue

 If you are like most consumers, you have a TV in your home. Many homes,

in fact, have more than one TV.

 The home theater entertainment experience is a growing trend, and larger

TVs are popular purchases; however, they are not always supported on the proper TV stands.

 Sometimes TVs are improperly secured or inappropriately

situated on dressers, bookcases, shelves, desks, audio

speakers, chests, or carts. As a result, TVs may fall over,

causing unnecessary injury.

We Care!

 The consumer electronics industry is committed to making home entertainment enjoyable and safe.

 The Consumer Electronics Association formed the

Home Entertainment Support Safety Committee,

comprised of TV and consumer electronics furniture

manufacturers, to advocate children’s safety and educate

consumers and their families about television safety.

Tune Into Safety

 One size does NOT fit all! Use appropriate furniture large enough to

support the weight of your TV (and other electronic components).

 Use appropriate angle braces, straps, and anchors to secure your furniture

to the wall (but never screw anything directly into the TV).

 Carefully read and understand the other enclosed instructions for proper

use of this product.

 Do not allow children to climb on or play with furniture and TVs.  Avoid placing any item on top of your TV (such as a VCR, remote control,

or toy) that a curious child may reach for.

 Remember that children can become excited while watching a program

and can potentially push or pull a TV over.

 Share our safety message about this hidden hazard of

your family and friends. Thank you!

the home with

ENER Y STAR

J5P00101A(E)P02-10 8/12/04, 11:15 AM2

ENERGY STAR® qualified TV. Products that earn the ENERGY STAR prevent green house gas emissions by meeting strict energy efficiency guidelines set by the U.S. Environmental Protection Agency and the U.S. Department of Energy. ENERGY STAR and the EN ERGY STAR mark are registered U.S. marks.

2500 Wilson Blvd. Arlington, VA 22201 U.S.A. Tel. 703-907-7600 Fax 703-907-7690 www.CE.org

CEA is the Sponsor, Producer and Manager of the International CES

Introduction

FCC compliance information

CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN EXTENSION CORD, RECEPTACLE

OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

Federal Communications Commission (FCC):

This equipment complies with Part 15 of the FCC rules.

FCC Declaration of Conformity Compliance Statement (Part 15):

The Toshiba 23HLV84, LCD TV/DVD Combination complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference that may cause undesired operation.

The party responsible for compliance to these rules is: Toshiba America Consumer Products, Inc.

82 Totowa Rd. Wayne, NJ 07470. Ph: (800) 631-3811

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the

FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by removing and applying power to the equipment, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and the receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Changes or modifications to this equipment not expressly approved by Toshiba could void the user’s authority to operate

this equipment.

CAUTION:

THIS DIGITAL VIDEO PLAYER EMPLOYS A LASER SYSTEM. TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE READ

THIS OWNER'S MANUAL CAREFULLY AND RETAIN FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE MAINTENANCE, CONTACT AN AUTHORIZED SERVICE LOCATION-SEE WARRANTY PROCEDURE ON PAGES 66-67.

USE OF CONTROLS, ADJUSTMENTS OR THE PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

TO PREVENT DIRECT EXPOSURE TO LASER BEAM, DO NOT TRY TO OPEN THE ENCLOSURE. VISIBLE LASER RADIATION MAY BE PRESENT WHEN THE ENCLOSURE IS OPENED. DO NOT STARE INTO BEAM.

It is permissible to record television programs, films, video tapes and other material only in the event that third party copyrights and other rights are not violated.

Location of the required Marking

The rating sheet and the safety caution are the rear of the unit.

CERTIFICATION: COMPLIES WITH FDA RADIATION PERFORMANCE STANDARDS, 21 CFR SUBCHAPTER J.

1. READ INSTRUCTIONS

All the safety and operating instructions should be read before the unit is operated.

2. RETAIN INSTRUCTIONS

The safety and operating instructions should be retained for future reference.

3. HEED WARNINGS

All warnings on the unit and in the operating instructions should be adhered to.

4. FOLLOW INSTRUCTIONS

All operating and use instructions should be followed.

5. CLEANING

Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Clean only with a dry cloth.

6. ATTACHMENTS

The manufacturer of this unit does not make any recommendations for attachments, as they may cause hazards.

7. WATER AND MOISTURE

Do not use this unit near water. For example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool.

your TV/DVD

TV/DVD’s Features

DVD Playback

Appendix

Connecting

Setting up

Using the

J5P00101A(E)P02-10 8/12/04, 11:15 AM3

8. ACCESSORIES

Do not place this unit on an unstable cart, stand, tripod, bracket, or table. The unit may fall, causing serious injury, and serious damage to the unit.

8A.

Introduction

An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

9. VENTILATION

Slots and openings in the cabinet back or bottom are provided for ventilation, and to ensure reliable operation of the unit, and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the unit on a bed, sofa, rug, or other similar surface. This unit should never be placed near or over a radiator or heat source. This unit should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

10. POWER SOURCE

This unit should be operated only from the type of power source indicated on the rating plate. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company.

11. GROUNDING OR POLARIZATION

This unit is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet.

12. POWER-CORD PROTECTION

Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

13. LIGHTNING

To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges.

14. POWER LINES

An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall onto or against such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits, as contact with them might be fatal.

15. OVERLOADING

Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.

16. OBJECT AND LIQUID ENTRY

Do not push objects through any openings in this unit, as they may touch dangerous voltage points or short out parts that could result in fire or electric shock. Never spill or spray any type of liquid into the unit.

17. OUTDOOR ANTENNA GROUNDING

If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is grounded to provide some protection against voltage surges and built-up static charges, Section 810 of the National Electrical Code (NEC), ANSI/NFPA 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

PORTABLE CART WARNING

(symbol provided by RETAC)

DANGER:

RISK OF DEATH, SERIOUS PERSONAL INJURY, OR EQUIPMENT DAMAGE.

S3126A

Wide plug

EXAMPLE OF ANTENNA GROUNDING AS PER THE NATIONAL ELECTRICAL CODE

NEC-NATIONAL ELECTRICAL CODE

S2898A

J5P00101A(E)P02-10 8/12/04, 11:15 AM4

GROUND

ELECTRIC SERVICE

EQUIPMENT

POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)

ANTENNA LEAD IN WIRE

CLAMP

ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)

GROUNDING CONDUCTORS (NEC SECTION 810-21)

GROUND CLAMPS

18. SERVICING

Do not attempt to service this unit yourself, as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. For example: a. When the power-supply cord or plug is damaged. b. If liquid has been spilled, or objects have fallen into the unit. c. If the unit has been exposed to rain or water. d. If the unit does not operate normally by following the operating instructions. Adjust only those

controls that are covered by the operating instructions, as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the unit to its normal operation.

e. If the unit has been dropped or the cabinet has been damaged. f. When the unit exhibits a distinct change in performance, this indicates a need for service.

19. REPLACEMENT PARTS

When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part.

Unauthorized substitutions may result in fire, electric shock or other hazards.

20. SAFETY CHECK

Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to determine that the unit is in proper operating condition.

21. HEAT

The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

22. DISC SLOT

Keep your fingers well clear of the disc slot as it is closing. Failure to do so may cause serious personal injury.

23. CONNECTING

When you connect the product to other equipment, turn off the power and unplug all of the equipment from the wall outlet. Failure to do so may cause a product damage. Read the owner's manual of the other equipment carefully and follow the instructions when making any connections.

24. HEADPHONES

When you use headphones, keep the volume at a moderate level. Using headphones continuously at a high volume may cause hearing damage.

25. LASER BEAM

Do not look into the opening of the disc slot or ventilation opening of the product to see the source of the laser beam. Doing so may cause sight damage.

26. DISC

Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious personal injury and product malfunction.

27. LCD

Do not press on or jolt the LCD panel. Doing so may cause the LCD panel glass to break and injury may occur. Should the LCD panel be broken and liquid leaks out, do not inhale or swallow it. Doing so may cause poisoning. If you have got it into your mouth, wash it out and consult your doctor. If your hands or clothes have touched it, wipe them with alcohol and a cleaning cloth and then wash them well.

28. NOTE TO CABLE TV SYSTEM INSTALLER

This reminder is provided to call the Cable TV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

Introduction

your TV/DVD

Connecting

your TV/DVD

Setting up

TV/DVD’s Features

Using the

DVD Playback

This product contains mercury. Disposal of mercury may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industrial Alliance: www.eiae.org.

J5P00101A(E)P02-10 8/12/04, 11:15 AM5

ON DISPOSAL

Appendix

Precautions

Notes on handling

■ Do not subject the LCD panel to physical shock, such as

Introduction

dropping it. It may cause unit damage and malfunction.

■ Retain the original shipping carton and packing materials. For maximum protection when shipping, repack the unit as it was originally packed at the factory.

■ Do not use volatile liquids, such as insecticide, near the unit. Do not leave rubber or plastic products in contact with the unit for prolonged periods of time. Doing so will leave marks on the finish.

■ The top and rear panels of the unit may become warm after a long period of use. This is not a malfunction.

■ When the unit is not in use, always remove the disc and turn off the power.

■ If you do not use the unit for a long period, the unit may not function properly in the future. Turn on and use the unit occasionally.

Notes on locating the unit

■ Place the unit on a level surface. Do not use it on a shaky or unstable surface such as a wobbling table or inclined stand. The loaded disc may become misaligned and damage the unit.

■ When you place this unit near a TV, radio, or VCR, the playback picture may become poor and the sound may be distorted. In this case, place the unit away from the TV, radio, or VCR.

Notes on moisture condensation

Moisture condensation damages the unit. Please read the following carefully.

Moisture condensation occurs, for example, when you pour a cold drink into a glass on a warm day and drops of water form on the outside of the glass. In the same way, moisture may condense on this unit’s internal optical pickup lens, one of the most crucial internal parts of the unit.

■ Moisture condensation may occur in the following situations:

• When you move the unit from a cold area to a warm area.

• When you use the unit in a room in which the heat was just turned on.

• When you use the unit in an area where cold air from an air conditioner directly hits the unit.

• When you use the unit in a humid area.

Optical pick-up

lens

Notes on cleaning

Clean only with a soft, dry, lint-free cloth.

Notes on LCD

■ The color LCD is manufactured using extremely high precision technology, but even so may include certain pixels that do not operate properly (that do not light, that remain lit constantly, etc.). We do our best to keep the number of these defective pixels to a minimum, but please understand that they cannot be completely eliminated even with the most advanced manufacturing technologies available today.

■ The fluorescent tube which illuminates the panel from the inside will deteriorate with use. When the LCD becomes dim, flickers, or does not illuminate, contact your dealer for replacement.

■ The brightness of the LCD monitor differs slightly depending on the viewing angles. Adjust the angle to obtain the best viewing. (The recommended angle is 90 degrees to the monitor.)

■ Never use the unit when moisture condensation may occur.

Using the unit when moisture condensation exists may damage discs and internal parts. Remove the disc, connect the power cord of the unit to the wall outlet, turn on the unit, and leave it for two or three hours. After two or three hours, the unit will have warmed up and evaporated any moisture. Keep the unit connected to the wall outlet and moisture condensation will seldom occur.

Wait!

Wall outlet

J5P00101A(E)P02-10 8/12/04, 11:15 AM6

Notes on discs

On handling discs

• Do not touch the playback side of the disc.

Structure of disc contents

Normally, DVD video discs are divided into titles, and the titles are sub-divided into chapters. Video CDs and Audio CDs are divided into tracks.

Introduction

Playback side

• Do not attach paper or tape to discs.

DO NOT

On cleaning discs

• Fingerprints and dust on the disc cause picture and sound deterioration. Wipe the disc from the center outward with a soft, lint-free cloth. Always keep the disc clean.

• Never use any type of solvent such as thinner, benzine, commercially available cleaners, or antistatic spray made for use on vinyl LPs. Use of such liquids may damage the disc.

On storing discs

• Never store discs in a place subject to direct sunlight or near heat sources.

• Never store discs in places subject to moisture and dust such as a bathroom or near a humidifier.

• Always store discs vertically in a case. Stacking or placing objects on discs outside of their case may cause warping.

DO NOT

DVD video disc

Title 1 Title 2

Chapter 1 Chapter 2 Chapter 1 Chapter 2 Chapter 3

Video CD/Audio CD

Track 1 Track 2 Track 3 Track 4 Track 5

Each title, chapter or track is assigned a number, which is called “title number”, “chapter number” or “track number” respectively. Some discs may not have these numbers.

Notes on copyright

The unauthorized recording, use, distribution, or revision of television programs, video tapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision® and is intended for home and other limited pay-per-view uses only, unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited. Macrovision is a registered trademark of Macrovision Corporation.

your TV/DVD

Connecting

your TV/DVD

Setting up

TV/DVD’s Features

Using the

DVD Playback

J5P00101A(E)P02-10 8/12/04, 11:15 AM7

Appendix

About this owner’s manual

DIGITAL VIDEO

This owner’s manual explains the basic instructions of this unit. Some DVD video discs are produced in a manner that allows specific or limited operation during playback.

Introduction

As such, the unit may not respond to all operating commands. This is not a defect in the unit. Refer to instruction notes of discs.

“ ” may appear on the TV screen during operation.

” means that the operation is not permitted by the unit

A “ or the disc. For example, sometimes it is unable to stop the playback of copyright message of the disc when the STOP (■) button is pressed. Alternatively, the “ ” may also indicate that the feature is not available for the disc.

Notes on region numbers

The region number of this unit is 1. If region numbers, which stand for their playable area, are printed on your

DVD video disc and you do not find 1 or playback will not be allowed by the player. (In this case, the unit will display a message on-screen.) Some DVDs that have no region code label may still be subject to area restrictions and therefore are not playable.

On Video CDs

This DVD player supports Video CDs equipped with the PBC (Version 2.0) function. (PBC is the abbreviation of Playback Control.) You can enjoy two playback variations depending on types of discs.

• Video CD not equipped with PBC function

(Version 1.1)

Sound and movie can be played on this DVD in the same way as an audio CD.

• Video CD equipped with PBC function

(Version 2.0)

In addition to operation of a Video CD not equipped with the PBC function, you can enjoy playback of interactive software with search function by using the menu displayed on the TV screen (Menu Playback). Some of the functions described in this owner’s manual may not work with some discs.

ALL

, disc

Playable discs

This unit can play the following discs.

Disc Mark

DVD video discs

Video

CDs

Audio

CDs

The following discs are also available.

• DVD-R/RW discs of DVD video format

• CD-R/CD-RW discs of CD-DA, Video CD, MP3,

WMA or JPEG format

• Kodak Picture CD and FUJICOLOR CD format Some of these discs may be incompatible.

• You cannot play discs other than those listed above.

• You cannot play discs of DVD-RAM, DVD-ROM, Photo

CD, etc., or non standardized discs even if they may be labeled as above.

• Some CD-R/RWs cannot be played back depending on the recording conditions.

• This unit uses the NTSC color system, and cannot play DVD video discs recorded in any other color system (PAL, SECAM, etc.).

Contents

Audio

Video

(moving

pictures)

Audio

Video

(moving

pictures)

Audio

Disc Size

12 cm

8 cm

12 cm

8 cm

12 cm

8 cm

(CD

single)

Maximum

playback time

Approx. 4 hours

(single sided disc)

Approx. 8 hours

(double sided disc)

Approx. 80 minutes

(single sided disc)

Approx. 160 minutes

(double sided disc)

Approx. 74 minutes

Approx. 20 minutes

Approx. 74 minutes

Approx. 20 minutes

J5P00101A(E)P02-10 8/12/04, 11:15 AM8

Because of problems and errors that can occur during the creation of DVD software and/or the manufacture of DVD discs, Toshiba America Consumer Products, L.L.C. and Toshiba of Canada, Ltd. cannot guarantee that this player will play every feature of every DVD bearing the DVD logo. As one of the creators of DVD technology, Toshiba DVD players are manufactured to the highest standards of quality and, as a result, such incompatibilities are very rare. If you happen to experience and difficulty playing a DVD on a Toshiba DVD player, please feel free to call our Contact listed in “How to Obtain Warranty Service” (page 66-67).

Introduction

Introduction ........................................................... 2

IMPORTANT SAFEGUARDS ..................................... 2

Precautions ................................................................ 6

Notes on discs ............................................................ 7

Exploring your new TV/DVD ..................................... 10

Selecting a location for the TV/DVD ......................... 11

Connecting your TV/DVD ................................... 11

Connecting a VCR .................................................... 11

Connecting a cable converter box and Antenna....... 12

Connecting a satellite receiver and a VCR ............... 13

Connecting a DVD player with ColorStream

(component video) and a VCR ................................. 14

Connecting a DTV receiver/set-top box with

ColorStream® (component video) and a VCR .......... 15

Connecting a camcorder .......................................... 16

Connecting an audio system .................................... 16

Connecting an HDMI™ or a DVI device to the

HDMI input ............................................................... 17

Connecting an amplifier equipped with a Dolby

Digital decoder ......................................................... 18

Connecting an amplifier equipped with a Dolby

Surround Pro Logic .................................................. 18

Connecting an amplifier equipped with a DTS

decoder .................................................................... 19

Connecting an amplifier equipped with a MPEG

audio decoder ........................................................... 19

Connecting an amplifier equipped with a digital

audio input ................................................................ 20

Connecting a PC (Personal Computer) .................... 20

Picture adjustments in the PC mode .................. 21

Resetting your picture adjustments in the

PC mode ............................................................. 21

Setting up your TV/DVD...................................... 22

Using the remote control .......................................... 22

Preparing the remote control for use .................. 22

Installing the remote control batteries ................. 22

Using the remote control with a VCR, DVD

player, or cable TV converter .............................. 22

Programming the remote control for use with a

VCR, or cable TV converter ................................ 23

VCR, and cable TV converter codes .................. 24

Learning about the remote control ...................... 25

Starting setup ........................................................... 26

Changing the on-screen display language ......... 26

Adding channels to the TV/DVD’s memory ........ 27

Progoramming channels automatically ............... 27

Adding and erasing channels manually .............. 27

Changing channels ............................................. 27

Using the TV/DVD’s Features............................. 28

Adjusting the channel settings .................................. 28

Using the locks menu ............................................... 28

Selecting a password.......................................... 28

Using the V-Chip (parental control) feature ........ 29

Locking channels ................................................ 30

Locking the video inputs ..................................... 31

Setting the GameTimerTM.................................... 31

Using the panel lock feature ............................... 32

Labeling channels .................................................... 32

Selecting the video input source .............................. 33

Labeling the video input sources .............................. 33

Setting the clock ....................................................... 34

Setting the ON timer ................................................. 34

Viewing the wide-screen picture formats (480i and

480p signals only) .................................................... 35

Scrolling the TheaterWide® picture (TheaterWide 2

and 3 only) ................................................................ 37

Selecting the cinema mode ...................................... 38

Using the ASPECT feature ....................................... 38

Adjusting the picture ................................................. 39

Selecting the picture mode ................................. 39

Adjusting the picture quality ................................ 39

Selecting the color temperature .......................... 40

Resetting your picture adjustments .................... 40

Setting the sleep timer .............................................. 41

Using the closed caption feature .............................. 41

Adjusting the sound .................................................. 42

Muting the sound ................................................ 42

Selecting stereo/SAP broadcasts ....................... 42

Adjusting the sound quality ................................. 42

Resetting your audio adjustments ...................... 43

Using the StableSound® feature ......................... 43

Using the Dolby

Using the WOW™ surround sound feature ........ 44

Turning off the built-in speakers.......................... 44

Selecting the HDMI audio input source .............. 44

Adjusting the back lighting feature ........................... 45

Displaying on-screen information ............................. 45

Auto power off .......................................................... 45

Understanding the Power Return feature ................. 45

Virtual surround feature .......... 43

DVD Playback ...................................................... 46

Playing a disc ........................................................... 46

Playing in fast reverse or fast forward directions ...... 48

Playing frame by frame ............................................ 48

Playing in slow-motion .............................................. 48

Locating a chapter or track ....................................... 48

Zooming ................................................................... 49

Locating desired scene ............................................ 49

Repeat playback ....................................................... 50

A-B Repeat playback ................................................ 50

Program playback .................................................... 51

Random playback ..................................................... 51

Changing angles ...................................................... 52

Title selection............................................................ 52

DVD menu ................................................................ 52

Changing soundtrack language ................................ 53

Subtitles .................................................................... 53

Karaoke playback ..................................................... 54

Disc status ................................................................ 54

To turn off the PBC ................................................... 54

MP3/WMA/JPEG CD operation ................................ 55

MP3/WMA CD playback ..................................... 56

JPEG CD playback ............................................. 57

DVD function setup .................................................. 58

Customizing the function settings ....................... 58

Temporary disabling of rating level by DVD disc

........ 61

Appendix .............................................................. 62

Language code list ................................................... 62

Troubleshooting ........................................................ 63

Specifications ........................................................... 65

Limited Warranty ...................................................... 66

your TV/DVD

Connecting

your TV/DVD

Setting up

TV/DVD’s Features

Using the

DVD Playback

Appendix

J5P00101A(E)P02-10 8/12/04, 11:15 AM9

Exploring your new TV/DVD

POWER

789

TV(DVD) VCR CABLE

TV/DVD

10 0

–

EXIT/

CANCEL

INPUT

PIC SIZE

MUTE

JUMP

CH RTN/ZOOM

SKIP

REW/SEARCH

FF/SEARCH

PLAY

TV/VCR

PAUSE/STEP

REC

SLOW

STOP

SUBTITLE

AUDIO

RETURN ANGLEREPEAT A-B

ENTER

VOL

CODE

VOL

–

SLEEP

PLAY MODE

MENU/ SETUP

RECALL/

DISPLAY

TOP MENU

CT-866

DVD MENU

You can operate your TV/DVD by using the buttons on the top panel or the remote control. The side and back panels provide the inputs to connect other equipment to your TV/DVD.

Introduction

The STARTING SETUP feature appears the first time you turn on the TV. See page 26 for details.

Top panel

Top

Front

POWER indicator

Remote sensor

Back

POWER

TV/VIDEO

VOLUME 2/3

CHANNEL

PLAY

STOP

SKIP 4/¢

EJECT 0

Right side

Left side

The volume and channel buttons on the top panel can be used as / and / buttons while TV menu is displayed on screen.

Approx 5˚

Approx 15˚

Remote control

Disc slot

You can adjust the angle of the TV screen 5˚ forward or 15˚ backward from vertical. Hold base of TV while adjusting the angle.

J5P00101A(E)P02-10 8/12/04, 11:15 AM10

Back panel (right)

HDMI IN VIDEO-1 IN

PC IN

ColorStream HD IN

AC power cord

COAXIAL DIGITAL

AUDIO OUT

Side panel

HEADPHONE

AUDIO-2 IN

Back panel (left)

RF IN

VARIABLE AUDIO OUT

Selecting a location for the TV/DVD

• Place the TV/DVD on the floor or on a sturdy platform in a location

where light does not directly hit the screen.

• Place the TV/DVD far enough from the walls to allow proper

ventilation. Inadequate ventilation may cause overheating, which may damage the TV/DVD.

Connecting your TV/DVD

If you haven’t connected electronic equipment before, or you have been frustrated in the past, you may wish to read this section. (Cables are not supplied.)

• A coaxial cable is the standard cable that comes in from your

antenna or cable converter box. Coaxial cables use “F” connectors.

• Standard A/V (audio/video) cables are usually color coded accord-

ing to use: yellow for video and red and white for audio. The red audio cable is for the stereo right channel, and the white audio cable is for the stereo left (or mono) channel. If you look at the rear panel of the TV/DVD, you will see that the terminals are color coded in the same manner as the cables.

• S-video cables provide better picture performance than standard

video cables. S-video cables can only be used with S-video compatible components.

• Component video cables provide better picture performance than

S-video cables. Component video cables can only be used with component video compatible components.

• HDMI (High Definition Multimedia Interface) cable is for use with

video equipment that has HDMI output (see page 17).

Note:

To prevent equipment damage, do not plug in any power cords until you have finished connecting all equipment.

Introduction

your TV/DVD

Connecting

your TV/DVD

Setting up

S-Video

ANTENNA

Coaxial Cable

AUDIO Cables

VIDEO

Cable

Component video

Cables

HDMI Cable

Connecting a VCR

This connection allows you to watch local channels and video programs, play or record on the VCR while watching TV, and record from one channel while watching another channel.

Cable Lead-in from cable box or antenna

Rear lower left of TV/DVD

Stereo VCR

You will need:

• two coaxial cables

• one set of standard A/V cables

Note:

If using a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable. For better picture quality, if your VCR has Svideo, you can use an S-video cable instead of the standard video cable. Do not connect a standard video cable and an S-video cable to VIDEO-1 simultaneously.

TV/DVD’s Features

Using the

DVD Playback

IN from ANT

CH 3 CH 4

J5P00101A(E)P11-21 8/12/04, 11:24 AM11

OUT to TV

OUT

VIDEO

AUDIO

Appendix

Connecting a cable converter box or Antenna

This television has an extended tuning range and can tune most cable channels without using a cable company supplied converter box. Some cable companies offer "premium pay channels" in which the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device, which is generally provided by the cable company.

Option 1: For Subscribers to Basic Cable TV Service

For basic cable service not requiring a Converter/Descrambler box, connect the incoming 75 ohm Coaxial Cable directly to the Antenna Jack on the back of the television.

Option 2: For Subscribers to Scrambled Cable TV Service

Connecting

If you subscribe to a cable service that requires the use of a Converter/

your TV/DVD

Descrambler box, connect the incoming cable to the Converter/ Descrambler box and connect the output of the box to the Antenna Jack on the back of the television. Follow the connections shown below. Set the television to the output of the Converter/Descrambler box (usually channel 3 or 4) and use the Converter/Descrambler box to select channels.

Option 3: For Subscribers to Unscrambled Basic Cable with Scrambled Premium Channels

If you subscribe to a cable service in which basic cable channels are unscrambled and premium channels require the use of a Converter/ Descrambler box, you may wish to use a two-set signal splitter (sometimes called a "two-set coupler") and an A/B Switch box from the cable installer or an electronics supply store. Follow the connections shown below. With the switch in the "B" position, you can directly tune any nonscrambled channels on your TV/DVD. With the switch in the "A" position, tune your TV/DVD to the output of the Converter/Descrambler box (usually channel 3 or 4) and use the box to tune scrambled channels.

Note:

When you use a converter box with your TV/ DVD, there may be features that you cannot program using the remote control, such as labeling channels, blocking channels, and programming your favorite channels.

From Cable

Option 1:

Option 2:

Option 3:

Cable Box

Rear lower left of TV/DVD

B SwitchSplitter

J5P00101A(E)P11-21 8/12/04, 11:24 AM12

Connecting a satellite receiver and a VCR

Introduction

This connection allows you to watch satellite, VCR, or TV programs. You can record from the satellite receiver and TV, as well as record one TV channel while watching another channel.

From satellite

Satellite Receiver

VIDEO AUDIO

Satellite IN

S-VIDEO

Stereo VCR

IN from ANT

CH 3 CH 4

OUT to TV

OUT

VIDEO AUDIO

You will need:

• three coaxial cables

• two sets of standard A/V cables

• one S-video cable

Note:

You can use a standard video cable instead of the S-video cable, but the picture quality will decrease. If you use an S-video cable between the TV/DVD and DVD player/satellite receiver, make the audio connections but remove the standard video cable. Do not connect both an S-video and a standard video cable to VIDEO1 at the same time or the picture performance will be unacceptable.

your TV/DVD

Connecting

your TV/DVD

Setting up

Rear lower left of TV/DVD

TV/DVD’s Features

Using the

DVD Playback

Appendix

J5P00101A(E)P11-21 8/12/04, 11:24 AM13

Connecting a DVD player with ColorStream (component video) and a VCR

This connection allows you to watch DVD, VCR, or TV programs and record TV programs. You can record from one source while watching a program from another source. Your TV/DVD is capable of using ColorStream (component video). Connecting your TV/DVD to a component video compatible DVD player, such as a Toshiba DVD player with ColorStream performance.

Connecting

your TV/DVD

Rear lower right of TV/DVD

, can greatly enhance picture quality and

DVD player with Component video

OUT

S-VIDEO

AUDIO

VIDEO

OUT

COLORSTREAM

You will need:

• two coaxial cables

• one set of standard A/V cables

• one set of component video cables

• one pair of standard audio cables

Note:

The ColorStream HD jacks can be used with Progressive (480p, 720p) and Interlaced (480i, 1080i) scan systems. A 1080i signal will provide the best picture performance.

The unauthorized recording, use, distribution or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

From antenna

Stereo VCR

IN from ANT

CH 3 CH 4

OUT to TV

Rear lower left of TV/DVD

OUT

VIDEO

AUDIO

J5P00101A(E)P11-21 8/12/04, 11:24 AM14

Connecting a DTV receiver/set-top box with ColorStream

(component video) and a VCR

Introduction

This connection allows you to watch DTV (digital TV), VCR, and TV programs, and record DTV and TV programs. Your TV/DVD has ColorStream

(component video) inputs. Connecting your TV to a DTV receiver with component video can greatly enhance picture quality and realism.

From Antenna

Stereo VCR

IN from ANT

CH 3 CH 4

OUT to TV

OUT

VIDEO

Rear lower right of TV/DVD

AUDIO

You will need:

• three coaxial cables

• two sets of standard A/V cables

• one set of standard audio cables

• one set of component video cables

Note:

For HDMI connection see page 17. The ColorStream HD jacks and HDMI jacks can be used with Progressive (480p, 720p) and Interlaced (480i, 1080i) scan systems. If your DTV or HDMI receiver does not have component video, use the S-video and standard audio connections instead. Do not connect both an S-video and a standard video cable to VIDEO1 at the same time or the picture performance will be unacceptable.

The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

your TV/DVD

Connecting

your TV/DVD

Setting up

From DTV Antenna

DTV Receiver with Component video

S-VIDEO VIDEO

COMPONENT VIDEO

OUT

Rear lower left

of TV/DVD

AUDIO

OUT

TV/DVD’s Features

Using the

DVD Playback

Appendix

J5P00101A(E)P11-21 8/12/04, 11:24 AM15

Connecting a camcorder

This connection allows you to watch videos recorded on a camcorder.

Connecting

your TV/DVD

VHS Camcorder

AUDIO

VIDEO

S-VIDEO

OUT

S-VIDEO

OUT

Rear lower left of TV/DVD

Side panel of TV/DVD

AUDIO

VIDEO

S-VHS Camcorder

You will need:

• one set of standard AV cables

You will need:

• one S-video cable

• one pair of standard audio cables

Note:

For better picture quality, if your camcorder has S-video, you can use an S-video cable (plus the standard audio cables) instead of a standard video cable. Do not connect both a standard video cable and an S-video cable at the same time, or the picture performance will be unacceptable.

Connecting an audio system

This connection allows you to use an audio amplifier and external speakers, and adjust the audio level using the TV/DVD’s remote control. To control the audio, turn on the TV/DVD and the stereo amplifier, and turn off the TV/DVD's built-in speakers (see “Turning off the built-in speakers” on page 44).

Amplifier

LINE IN

Rear lower left of TV/DVD

You will need:

• one pair of standard audio cables

Note:

To hear sound when using an external audio amplifier, the volume of both the TV/DVD and the amplifier must be set above 0 (zero). For example, if the volume of the TV/DVD is set to 0, you will not be able to hear any sound, even if the volume of the amplifier is at its highest level.

J5P00101A(E)P11-21 8/12/04, 11:24 AM16

Connecting an HDMI™ or a DVI device to the HDMI input

The HDMI and uncompressed digital video from an HDMI device or uncompressed digital video from a DVI

This input is designed to accept HDCP in digital form from EIA/CEA-861/861B– compliant consumer electronic devices (such as a set-top box or DVD player with HDMI or DVI output).

The HDMI input is designed for best performance with high definition video signals. It will accept and display 480i, 480p, 720p and 1080i signals.

Note: The HDMI jack is not intended for connection to

To connect an HDMI device, you will need:

• one HDMI cable (type A connector)

You must set the HDMI audio input setting to HDMI in the AUDIO menu (see page 44).

Some CDVs (Video CDs) may not output digital audio signals. In that case, you may hear sound by connecting analog audio cables. If you do use analog audio cables for this reason, you will need to set the HDMI audio input setting to “DVI” to hear the analog audio (see page 44). Note: If you connect an HDMI device and analog audio cables (as described in the previous paragraph), and then you play media with digital audio output, to hear digital audio you must set the HDMI audio input setting to “HDMI” (page 44).

[1]

input on your TV/DVD receives digital audio

[2]

device.

[3]

program material

[4]

and should not be used with a personal computer. For PC connection see page 20.

For proper operation, it is recommended that you use as short an HDMI cable as possible. You should not encounter difficulty if you use an HDMI cable that is shorter than 16.4ft (5m).

HDMI cable transfers both video and audio. Separate analog audio cables are not required (see illustration below).

HDMI device

VIDEO AUDIO

OUT

HDMI

OUT

[1]

HDMI = High-Definition Multimedia Interface.

[2]

DVI = Digital Video Interface.

[3]

HDCP = High-bandwidth Digital Content Protection.

[4]

EIA/CEA-861/861B compliance covers the transmission of uncompressed digital video with highbandwidth digital content protection, which is being standardized for reception of high-definition video signals. Because this is an evolving technology, it is possible that some devices may not operate properly with the TV/DVD.

To ensure that the HDMI or DVI device is reset properly, it is recommended that you follow these procedures:

• When turning on your electronic components, turn on the TV/DVD first, and then the HDMI or DVI device.

• When turning off your electronic components, turn off the HDMI or DVI device first,and then the TV/DVD.

To connect a DVI device, you will need:

• one HDMI–to–DVI adapter cable (HDMI type A connector)

For proper operation, the length of an HDMI-to-DVI adapter cable should not exceed 9.8 ft (3m). The recommended length is 6.6 ft (2m).

• one pair of standard analog audio cables

An HDMI-to-DVI adapter cable transfers only video. Separate analog audio cables are required (see illustration below).

You must set the HDMI audio input setting to DVI in the AUDIO menu (see page 44).

DVI device

VIDEO AUDIO

Rear lower right of TV/DVD

Introduction

your TV/DVD

Connecting

your TV/DVD

Setting up

TV/DVD’s Features

Using the

DVI

OUT

DVD Playback

Rear lower right of TV/DVD

HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC.

J5P00101A(E)P11-21 8/12/04, 11:24 AM17

Appendix

Connecting an amplifier equipped with a Dolby

Dolby Digital

Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to reproduce this realistic effect in the home. You can enjoy motion picture and live concert DVD video discs encoded via the Dolby Digital recording system with this dynamic realistic sound by connecting the TV/DVD to a 6 channel amplifier equipped with a Dolby Digital decoder or Dolby Digital processor. If you have a Dolby Surround Pro Logic decoder, you will obtain the full benefit of Pro Logic from the same DVD movies that provide full 5.1-channel Dolby Digital soundtracks, as well as from titles with the Dolby Surround mark.

Rear lower right of TV/DVD

Connecting

your TV/DVD

To COAXIAL DIGITAL AUDIO OUT

Digital decoder

Amplifier equipped with a

Dolby Digital decoder

To COAXIAL type digital audio input

You will need:

• one coaxial cables

Notes:

• DO NOT connect the COAXIAL DIGITAL AUDIO OUT jack of the TV/DVD to the AC-3 RF input of a Dolby Digital Receiver. This input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the COAXIAL DIGITAL AUDIO OUT jack of the TV/DVD.

• Connect the COAXIAL DIGITAL AUDIO OUT jack of the TV/DVD to the “COAXIAL” input of a Receiver or Processor.

• Refer to the owner’s manual of the connected equipment as well.

• The output sound of the TV/DVD has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.

• Turn off the amplifier before you connect or disconnect the TV/DVD’s power cord. If you leave the amplifier power on, the speakers may be damaged.

Connecting an amplifier equipped with Dolby

Dolby Surround Pro Logic

You can enjoy the dynamic realistic sound of Dolby Surround Pro Logic by connecting an amplifier and speaker system (right and left front speakers, a center speaker, and one or two rear speakers).

■ With an amplifier equipped with Dolby Digital:

■ With an amplifier not equipped with Dolby Digital:

Surround Pro Logic

Connect the equipment the same way as described in “Connecting to an amplifier equipped with a Dolby Digital decoder.” Refer to that amplifier’s owner’s manual and set the amplifier so you can enjoy Dolby Surround Pro Logic sound.

Connect the equipment as follows.

• This connection is only suitable for Video CDs and Audio CDs.

Rear lower left of TV/DVD

To VARIABLE AUDIO OUT

Amplifier equipped with

Dolby Surround Pro Logic

Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories.

You will need:

• one pair of standard audio cables

Notes:

• Refer to the owner’s manual of the connected equipment as well.

• Turn off the amplifier before you connect or disconnect the TV/DVD’s power cord. If you leave the amplifier power on, the speakers may be damaged.

Connect one or two rear speakers. The out-

put sound from the rear speakers will be monaural even if you connect two rear speakers.

J5P00101A(E)P11-21 8/12/04, 11:24 AM18

To audio input

Connecting an amplifier equipped with a

DTS

Digital Theater Systems (DTS)

DTS is a high quality surround technology used in theaters and now available for home use, on DVD video discs or audio CDs. If you have a DTS decoder or processor, you can obtain the full benefit of 5.1 channel DTS encoded sound tracks on DVD video discs or audio CDs.

Rear lower right of TV/DVD

decoder

To COAXIAL DIGITAL AUDIO OUT

Amplifier equipped with

a DTS decoder

To COAXIAL type digital audio input

You will need:

• one coaxial cable

Notes:

• Connect the COAXIAL DIGITAL AUDIO OUT jack of the TV/DVD to the “COAXIAL” input of a Receiver or Processor.

• Refer to the owner’s manual of the connected equipment as well.

• Turn off the amplifier before you connect or disconnect the TV/DVD’s power cord. If you leave the amplifier power on, the speakers may be damaged.

DTS and DTS Digital Out are trademarks of Digital Theater Systems, Inc.

Introduction

your TV/DVD

Connecting

your TV/DVD

Setting up

Connecting an amplifier equipped with a MPEG audio decoder

MPEG2 sound

You can enjoy motion picture and live concert DVD video discs encoded via the MPEG2 recording system with dynamic realistic sound by connecting an amplifier equipped with an MPEG2 audio decoder or MPEG2 audio processor.

Rear lower right of TV/DVD

To COAXIAL DIGITAL AUDIO OUT

Amplifier equipped with an

MPEG2 audio decoder

To COAXIAL type digital audio input

You will need:

• one coaxial cable

Notes:

• Connect the COAXIAL DIGITAL AUDIO OUT jack of the TV/DVD to the “COAXIAL” input of a Receiver or Processor.

• Refer to the owner’s manual of the connected equipment as well.

• Turn off the amplifier before you connect or disconnect the TV/DVD’s power cord. If you leave the amplifier power on, the speakers may be damaged.

TV/DVD’s Features

Using the

DVD Playback

Appendix

J5P00101A(E)P11-21 8/12/04, 11:24 AM19

Connecting an amplifier equipped with a digital audio input

2 channel digital stereo

You can enjoy the dynamic sound of 2 channel digital stereo by connecting an amplifier equipped with a digital audio input and speaker system (right and left front speakers).

Rear lower right of TV/DVD

To COAXIAL DIGITAL AUDIO OUT

Connecting

your TV/DVD

Amplifier equipped with a

Digital audio input

To COAXIAL type digital audio input

You will need:

• one coaxial cable

Notes:

• PCM audio is limited to DVD or CD playback.

• Connect the COAXIAL DIGITAL AUDIO OUT jack of the TV/DVD to the “COAXIAL” input of a Receiver or Processor.

• Refer to the owner’s manual of the connected equipment as well.

• Turn off the amplifier before you connect or disconnect the TV/DVD’s power cord. If you leave the amplifier power on, the speakers may be damaged.

Connecting a PC (Personal Computer)

Before you connect this TV/DVD to your PC, change the adjustment of your PC’s Resolution and Refresh rate. See “Monitor Display modes” at right. Connect one end of a (male to male) VGA cable to the video card of the computer and the other end to the VGA connector PC at the back of the TV/DVD. Fix the connectors firmly with the screws on the plug. In case of a Multimedia computer, connect the audio cables to the audio outputs of your Multimedia computer and to the AUDIO L and R connectors of the PC IN jacks of the TV/DVD. Press INPUT and number button 5 on the remote control to select PC mode. Switch on the computer. The TV/DVD can be operated as the computer monitor.

Rear lower right of TV/DVD

You will need:

• one VGA cable

Monitor Display modes

MODE Resolution Refresh rate VGA 640x480 60Hz SVGA 800x600 56.3Hz SVGA 800x600 60.3Hz XGA 1024x768 60Hz

To return to TV mode:

Press INPUT again.

Notes:

• The current signal source does not display when you return to TV mode.

• The form of a character of OSD in PC mode differ from TV or DVD mode.

J5P00101A(E)P11-21 8/12/04, 11:24 AM20

To P C

Picture adjustments in the PC mode

There are a number of picture settings you can adjust to optimize the performance of the unit in PC mode.

Press MENU during PC mode. The PC monitor Menu will appear on the upper left of the TV screen.

Each time you press MENU, the PC Monitor Menu will change as follows:

Menu 1

When you are finished adjusting the picture, press EXIT.

Example: Adjust the contrast.

1. During PC mode, press MENU once. The Menu 1 appears on the TV screen.

2. Press ▲ or ▼ to select CONTRAST.

3. Press

or to adjust CONTRAST.

4. Press EXIT to return to normal viewing.

DESCRIPTION ABOUT EACH SETTING OPTION

BRIGHTNESS: To adjust the brightness of PC Monitor screen. CONTRAST: To adjust the contrast of PC Monitor screen. HOR POSITION: To adjust the horizontal position of the image on

the PC Monitor screen. Each video standard will require a different value for this setting.

VER POSITION: To adjust the vertical position of the image on the

PC Monitor screen. Each video standard will require a different value for this setting.

PHASE: This must be adjusted after the frequency has been

set to optimize picture quality.

CLOCK: To minimize any vertical bars or stripes visible on

the screen background.

AUTO ADJUST: When you select this and press ENTER, the HOR

POSITION and VER POSITION are adjusted automatically. At the same time, your adjusted level will be cancelled. If the result after the automatic adjustment is not satisfying, manual correction is possible.

RED/GREEN/BLUE: To adjust the color temperature of PC Monitor

screen.

Menu 2

POWER

TV(DVD) VCR CABLE

TV/DVD

–

PIC SIZE

MUTE

100

MENU/ SETUP

CODE

TOP MENUDVD MENU

SKIP

FF/SEARCH

PAUSE/STEP

VOL

Exit

789

VOL

–

CANCEL

RECALL/ DISPLAY

SUBTITLE

PLAY MODE

REW/SEARCH

EXIT/

JUMP

TV/VCR

ENTER

INPUT

SLEEP

AUDIO

RETURN ANGLEREPEAT A-B

CH RTN/ZOOM

PLAY

STOP

Notes:

• If you wish to change the on-screen language, follow the steps 1-3 on page 26.

• If no buttons are pressed for more than approx. 60 seconds, the PC Monitor Menu screen will return to normal Monitor screen automatically.

• The PC Monitor Menu settings are not effective for normal TV mode, DVD mode or external input mode.

Introduction

your TV/DVD

Connecting

your TV/DVD

Setting up

TV/DVD’s Features

Using the

DVD Playback

Resetting your picture adjustments in the PC mode

The RESET function returns your picture quality adjustments to the following factory settings:

Menu 1 Menu 2

Brightness .............. center (0) Red ......................... center (0)

Contrast .................. max (25) Green ...................... center (0)

To reset your picture adjustments:

1. Press MENU during PC mode.

2. Press ▲ or ▼ to highlight RESET, and then press .

J5P00101A(E)P11-21 8/12/04, 11:24 AM21

Blue ......................... center (0)

Appendix

+ 47 hidden pages