Toshiba 23HL84 User Manual

ENER Y STAR PARTNER

Introduction

Connecting your TV

Setting up your TV

Using the TV’s Features

23HL84

J3R50121A(E)Cover 12/08/2004, 10:48 AM1

Appendix

IMPORTANT SAFEGUARDS

Always read and understand the PRODUCT WARNINGS and

Introduction

USER DIRECTIONS that are contained in this manual before attempting to use your television, to help ensure its safe use.

Always store this manual near your television for convenient future reference.

Dear Customer,

Thank you very much for purchasing this Toshiba television. You must carefully read and understand all of the safety instructions

contained in this manual before you attempt to use this product in order to avoid potential hazards that could cause bodily injury or property damage or could damage your Television.

We hope that you are completely satisfied with your Toshiba television and that it will give you long and enjoyable service. We look forward to providing you with additional Toshiba products to serve all of your entertainment needs in the future.

Safety Precautions

WARNING: TO REDUCE THE RISK OF FIRE OR

ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK!

DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK). NOUSER-SER VICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle, is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING:WARNING:

WARNING: Handling the cord on this product or cords

WARNING:WARNING:

associated with accessories sold with this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm.

Wash hands after handling.

NOTE TO CATV INSTALLERS

This is a reminder to call the CATV system installer’s attention to Article 820-40 of the NEC, which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to grounding system of the building, as close to the point of cable entry as practical. For additional antenna grounding information, see item 17 on page 4.

Child Safety

It Makes A Difference Where Your TV Stands

Congratulations on your purchase! As you enjoy your new TV, keep these safety tips in mind:

The Issue

 If you are like most consumers, you have a TV in your home. Many homes,

in fact, have more than one TV.

 The home theater entertainment experience is a growing trend, and larger

TVs are popular purchases; however, they are not always supported on the proper TV stands.

 Sometimes TVs are improperly secured or inappropriately

situated on dressers, bookcases, shelves, desks, audio

speakers, chests, or carts. As a result, TVs may fall over,

causing unnecessary injury.

We Care!

 The consumer electronics industry is committed to making home entertainment enjoyable and safe.

 The Consumer Electronics Association formed the

Home Entertainment Support Safety Committee,

comprised of TV and consumer electronics furniture

manufacturers, to advocate children’s safety and educate

consumers and their families about television safety.

Tune Into Safety

 One size does NOT fit all! Use appropriate furniture large enough to

support the weight of your TV (and other electronic components).

 Use appropriate angle braces, straps, and anchors to secure your furniture

to the wall (but never screw anything directly into the TV).

 Carefully read and understand the other enclosed instructions for proper

use of this product.

 Do not allow children to climb on or play with furniture and TVs.  Avoid placing any item on top of your TV (such as a VCR, remote control,

or toy) that a curious child may reach for.

 Remember that children can become excited while watching a program

and can potentially push or pull a TV over.

 Share our safety message about this hidden hazard of

your family and friends. Thank you!

the home with

ENER Y STAR

J3R50121A(E)P02-10 12/08/2004, 11:55 AM2

ENERGY STAR® qualified TV. Products that earn the ENERGY STAR prevent green house gas emissions by meeting strict energy efficiency guidelines set by the U.S. Environmental Protection Agency and the U.S. Department of Energy. ENERGY STAR and the EN ERGY STAR mark are registered U.S. marks.

2500 Wilson Blvd. Arlington, VA 22201 U.S.A. Tel. 703-907-7600 Fax 703-907-7690 www.CE.org

CEA is the Sponsor, Producer and Manager of the International CES

FCC compliance information

CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN EXTENSION CORD, RECEPTACLE

OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

Federal Communications Commission (FCC):

This equipment complies with Part 15 of the FCC rules.

FCC Declaration of Conformity Compliance Statement (Part 15):

The Toshiba 23HL84, LCD TV Combination complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference that may cause undesired operation.

The party responsible for compliance to these rules is: Toshiba America Consumer Products, Inc.

82 Totowa Rd. Wayne, NJ 07470. Ph: (800) 631-3811

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the

FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by removing and applying power to the equipment, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and the receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Changes or modifications to this equipment not expressly approved by Toshiba could void the user’s authority to operate this

equipment.

It is permissible to record television programs, films, video tapes and other material only in the event that third party copyrights and other rights are not violated.

Introduction

Connecting your TV

Setting up your TV

1. READ INSTRUCTIONS

All the safety and operating instructions should be read before the unit is operated.

2. RETAIN INSTRUCTIONS

The safety and operating instructions should be retained for future reference.

3. HEED WARNINGS

All warnings on the unit and in the operating instructions should be adhered to.

4. FOLLOW INSTRUCTIONS

All operating and use instructions should be followed.

5. CLEANING

Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Clean only with a dry cloth.

6. ATTACHMENTS

The manufacturer of this unit does not make any recommendations for attachments, as they may cause hazards.

7. WATER AND MOISTURE

Do not use this unit near water. For example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool.

8. ACCESSORIES

Do not place this unit on an unstable cart, stand, tripod, bracket, or table. The unit may fall, causing serious injury, and serious damage to the unit.

8A.

An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

DANGER:

RISK OF DEATH, SERIOUS PERSONAL INJURY, OR EQUIPMENT DAMAGE.

PORTABLE CART WARNING

(symbol provided by RETAC)

S3126A

Using the TV’s Features

Appendix

J3R50121A(E)P02-10 12/08/2004, 10:49 AM3

9. VENTILATION

Slots and openings in the cabinet back or bottom are provided for ventilation, and to ensure reliable operation of the unit, and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the unit on a bed, sofa, rug, or other similar surface. This unit should never be placed near or over a radiator or

Introduction

heat source. This unit should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

10. POWER SOURCE

This unit should be operated only from the type of power source indicated on the rating plate. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company.

11. GROUNDING OR POLARIZATION

This unit is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet.

12. POWER-CORD PROTECTION

Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

13. LIGHTNING

To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges.

14. POWER LINES

An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall onto or against such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits, as contact with them might be fatal.

15. OVERLOADING

Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.

16. OBJECT AND LIQUID ENTRY

Do not push objects through any openings in this unit, as they may touch dangerous voltage points or short out parts that could result in fire or electric shock. Never spill or spray any type of liquid into the unit.

17. OUTDOOR ANTENNA GROUNDING

If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is grounded to provide some protection against voltage surges and built-up static charges, Section 810 of the National Electrical Code (NEC), ANSI/NFPA 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

Wide plug

EXAMPLE OF ANTENNA GROUNDING AS PER THE NATIONAL ELECTRICAL CODE

NEC-NATIONAL ELECTRICAL CODE

S2898A

J3R50121A(E)P02-10 12/08/2004, 2:47 PM4

GROUND

ELECTRIC SERVICE

EQUIPMENT

POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)

ANTENNA LEAD IN WIRE

CLAMP

ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)

GROUNDING CONDUCTORS (NEC SECTION 810-21)

GROUND CLAMPS

18. SERVICING

Do not attempt to service this unit yourself, as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. For example: a. When the power-supply cord or plug is damaged. b. If liquid has been spilled, or objects have fallen into the unit. c. If the unit has been exposed to rain or water. d. If the unit does not operate normally by following the operating instructions. Adjust only those

controls that are covered by the operating instructions, as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the unit to its normal operation.

e. If the unit has been dropped or the cabinet has been damaged. f. When the unit exhibits a distinct change in performance, this indicates a need for service.

19. REPLACEMENT PARTS

When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part.

Unauthorized substitutions may result in fire, electric shock or other hazards.

20. SAFETY CHECK

Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to determine that the unit is in proper operating condition.

21. HEAT

The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

22. CONNECTING

When you connect the product to other equipment, turn off the power and unplug all of the equipment from the wall outlet. Failure to do so may cause a product damage. Read the owner's manual of the other equipment carefully and follow the instructions when making any connections.

23. HEADPHONES

When you use headphones, keep the volume at a moderate level. Using headphones continuously at a high volume may cause hearing damage.

24. LCD

Do not press on or jolt the LCD panel. Doing so may cause the LCD panel glass to break and injury may occur. Should the LCD panel be broken and liquid leaks out, do not inhale or swallow it. Doing so may cause poisoning. If you have got it into your mouth, wash it out and consult your doctor. If your hands or clothes have touched it, wipe them with alcohol and a cleaning cloth and then wash them well.

Introduction

Connecting your TV

Setting up your TV

ON DISPOSAL

This product contains mercury. Disposal of mercury may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industrial Alliance: www.eiae.org.

Using the TV’s Features

Appendix

J3R50121A(E)P02-10 12/08/2004, 10:49 AM5

Precautions

Notes on handling

■Do not subject the LCD panel to physical shock, such as dropping it. It may cause unit damage and malfunction.

■Retain the original shipping carton and packing

Introduction

materials. For maximum protection when shipping, repack the unit as it was originally packed at the factory.

■Do not use volatile liquids, such as insecticide, near the unit. Do not leave rubber or plastic products in contact with the unit for prolonged periods of time. Doing so will leave marks on the finish.

■The top and rear panels of the unit may become warm after a long period of use. This is not a malfunction.

■When the unit is not in use, turn off the power.

■If you do not use the unit for a long period, the unit may

not function properly in the future. Turn on and use the unit occasionally.

Notes on locating the unit

■Place the unit on a level surface. Do not use it on a shaky or unstable surface such as a wobbling table or inclined stand. Doing so may damage the unit.

■When you place this unit near a TV, radio, or VCR, the playback picture may become poor and the sound may be distorted. In this case, place the unit away from the TV, radio, or VCR.

Notes on cleaning

Clean only with a soft, dry, lint-free cloth.

Notes on LCD

■The color LCD is manufactured using extremely high precision technology, but even so may include certain pixels that do not operate properly (that do not light, that remain lit constantly, etc.). We do our best to keep the number of these defective pixels to a minimum, but please understand that they cannot be completely eliminated even with the most advanced manufacturing technologies available today.

■The fluorescent tube which illuminates the panel from the inside will deteriorate with use. When the LCD becomes dim, flickers, or does not illuminate, contact your dealer for replacement.

■The brightness of the LCD monitor differs slightly depending on the viewing angles. Adjust the angle to obtain the best viewing. (The recommended angle is 90 degrees to the monitor.)

J3R50121A(E)P02-10 12/08/2004, 10:49 AM6

Introduction ........................................................... 2

IMPORTANT SAFEGUARDS ..................................... 2

Precautions ................................................................ 6

Welcome to Toshiba ................................................... 6

Exploring your new TV................................................ 8

Selecting a location for the TV.................................... 9

Connecting your TV .............................................. 9

Connecting a VCR...................................................... 9

Connecting a cable converter box............................ 10

Connecting a DVD player/satellite receiver and a

VCR.......................................................................... 11

Connecting a DVD player with ColorStream

(component video) and a VCR ................................. 12

Connecting a DTV receiver/set-top box with

ColorStream® (component video) and a VCR .......... 13

Connecting a camcorder .......................................... 14

Connecting an audio system .................................... 14

Connecting an HDMI™ or a DVI device to the

HDMI input ............................................................... 15

Connecting a PC (Personal Computer).................... 16

Setting up your TV...............................................17

Using the remote control .......................................... 17

Preparing the remote control for use .................. 17

Installing the remote control batteries................. 17

Using the remote control with a cable TV converter/satellite receiver, VCR or DVD player . 17 Programming the remote control for use with a cable TV converter/satellite receiver, VCR or

DVD player .......................................................... 18

Cable TV converter/satellite receiver, VCR and

DVD player code tables ...................................... 19

Learning about the remote control...................... 21

Starting setup ........................................................... 22

Changing the on-screen display language ......... 22

Adding channels to the TV’s memory ................. 23

Progoramming channels automatically............... 23

Adding and erasing channels manually .............. 23

Changing channels ............................................. 23

Using the TV’s Features......................................24

Adjusting the channel settings.................................. 24

Programming your favorite channels ........................ 24

Using the locks menu ............................................... 25

Selecting a password.......................................... 25

Using the V-Chip (parental control) feature......... 26

Locking channels ................................................ 27

Locking the video inputs ..................................... 27

Setting the GameTimer

Using the panel lock feature ............................... 28

Labeling channels .................................................... 29

Selecting the video input source .............................. 29

Labeling the video input sources.............................. 30

Setting the clock ....................................................... 30

Setting the ON timer................................................. 31

Viewing the wide-screen picture formats (480i and

480p signals only) .................................................... 32

Scrolling the TheaterWide

and 3 only)................................................................ 34

Selecting the cinema mode ...................................... 35

Using the ASPECT feature....................................... 35

Adjusting the picture................................................. 36

Selecting the picture mode ................................. 36

Adjusting the picture quality................................ 36

Selecting the color temperature.......................... 37

Resetting your picture adjustments .................... 37

Picture adjustments in the PC mode .................. 38

Resetting your picture adjustment

in the PC mode ................................................... 38

Setting the sleep timer.............................................. 39

Using the closed caption feature .............................. 39

Adjusting the sound.................................................. 40

Muting the sound ................................................ 40

Selecting stereo/SAP broadcasts ....................... 40

Adjusting the sound quality................................. 40

Resetting your audio adjustments ...................... 41

Using the StableSound

Using the Dolby® Virtual surround feature .......... 41

Using the WOW™ surround sound feature......... 42

Turning off the built-in speakers .......................... 42

Selecting the HDMI audio input source .............. 42

Adjusting the back lighting feature............................ 43

Displaying on-screen information ............................. 43

Auto power off .......................................................... 43

Understanding the Power Return feature ................. 43

.................................... 28

picture (TheaterWide 2

feature ......................... 41

Appendix..............................................................44

Troubleshooting ........................................................ 44

Specifications ........................................................... 45

Limited Warranty....................................................... 46

Introduction

Connecting your TV

Setting up your TV

Using the TV’s Features

J3R50121A(E)P02-10 12/08/2004, 2:45 PM7

Appendix

Exploring your new TV

You can operate your TV by using the buttons on the top panel or the remote control. The side and back panels provide the inputs to connect other equipment to your TV.

Introduction

Top panel

Top

Front

Remote sensor

Back

POWER

TV/VIDEO

POWER indicator

VOLUME 2/3

CHANNEL

The STARTING SETUP feature appears the first time you turn on the TV. See page 22 for details.

The volume and channel buttons on the top panel can be used as / and / buttons while TV menu is

displayed on screen.

Approx 5˚

Right side

Left side

Approx 15˚

Remote control

You can adjust the angle of the TV screen 5˚ forward or 15˚ backward from vertical. Hold base of TV white adjusting the angle.

Back panel (right)

HDMI IN

PC IN

AC power cord

ColorStream HD IN

Side panel

HEADPHONE

AUDIO-2 IN

Back panel (left)

VIDEO-1 IN

VARIABLE AUDIO OUT

RF IN

J3R50121A(E)P02-10 12/08/2004, 10:49 AM8

Selecting a location for the TV

• Place the TV on the floor or on a sturdy platform in a location where

light does not directly hit the screen.

• Place the TV far enough from the walls to allow proper ventilation. Inadequate ventilation may cause overheating, which may damage the TV.

Connecting your TV

If you haven’t connected electronic equipment before, or you have been frustrated in the past, you may wish to read this section. (Cables are not supplied.)

• A coaxial cable is the standard cable that comes in from your antenna or cable converter box. Coaxial cables use “F” connectors.

• Standard A/V (audio/video) cables are usually color coded according to use: yellow for video and red and white for audio. The red audio cable is for the stereo right channel, and the white audio cable is for the stereo left (or mono) channel. If you look at the rear panel of the TV, you will see that the terminals are color coded in the same manner as the cables.

• S-video cables provide better picture performance than standard video cables. S-video cables can only be used with S-video compatible components.

• Component video cables provide better picture performance than S-video cables. Component video cables can only be used with component video compatible components.

• HDMI (High Definition Multimedia Interface) cable is for use with video equipment that has HDMI output (see page 15).

Note:

To prevent equipment damage, do not plug in any power cords until you have finished connecting all equipment.

Introduction

Connecting your TV

Setting up your TV

S-Video

ANTENNA

Coaxial Cable

AUDIO Cables

VIDEO

Cable

Component video

Cables

HDMI Cable

Connecting a VCR

This connection allows you to watch local channels and video programs, play or record on the VCR while watching TV, and record from one channel while watching another channel.

Cable Lead-in from cable box or antenna

Rear lower left of TV

Stereo VCR

You will need:

• two coaxial cables

• one set of standard A/V cables

Note:

If using a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable. For better picture quality, if your VCR has S-video, you can use an S-video cable instead of the standard video cable. Do not connect a standard video cable and an S-video cable to VIDEO-1 simultaneously.

Using the TV’s Features

IN from ANT

CH 3 CH 4

J3R50121A(E)P02-10 12/08/2004, 10:49 AM9

OUT to TV

OUT

VIDEO

AUDIO

Appendix

Connecting a cable converter box or Antenna

This television has an extended tuning range and can tune most cable channels without using a cable company supplied converter box. Some cable companies offer "premium pay channels" in which the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device, which is generally provided by the cable company.

Option 1: For Subscribers to Basic Cable TV Service

For basic cable service not requiring a Converter/Descrambler box, connect the incoming 75 ohm Coaxial Cable directly to the Antenna Jack on the back of the television.

Option 2: For Subscribers to Scrambled Cable TV Service

If you subscribe to a cable service that requires the use of a Converter/ Descrambler box, connect the incoming cable to the Converter/ Descrambler box and connect the output of the box to the Antenna Jack on the back of the television. F ollow the connections shown below. Set the television to the output of the Converter/Descrambler box (usually channel 3 or 4) and use the Converter/Descrambler box to select channels.

Connecting your TV

Option 3: For Subscribers to Unscrambled Basic Cable with Scrambled Premium Channels

If you subscribe to a cable service in which basic cable channels are unscrambled and premium channels require the use of a Converter/ Descrambler box, you may wish to use a two-set signal splitter (sometimes called a "two-set coupler") and an A/B Switch box from the cable installer or an electronics supply store. Follow the connections shown below. With the switch in the "B" position, you can directly tune any nonscrambled channels on your TV. With the switch in the "A" position, tune your TV to the output of the Converter/Descrambler box (usually channel 3 or 4) and use the box to tune scrambled channels.

Note:

When you use a converter box with your TV, there may be features that you cannot program using the remote control, such as labeling channels, blocking channels, and programming your favorite channels.

From Cable

Option 1:

Option 2:

Option 3:

Cable Box

Rear lower left of TV

B SwitchSplitter

J3R50121A(E)P02-10 12/08/2004, 10:49 AM10

Connecting a DVD player/satellite receiver and a VCR

This connection allows you to watch DVD/satellite, VCR, or TV programs. You can record from the satellite receiver and TV, as well as record one TV channel while watching another channel.

DVD player / Satellite Receiver

VIDEO AUDIO

Satellite IN

S-VIDEO

Stereo VCR

OUT to TV

OUT

You will need:

• three coaxial cables

• two sets of standard A/V cables

• one S-video cable

Note:

You can use a standard video cable instead of the S-video cable, but the picture quality will decrease. If you use an S-video cable between the TV and DVD player/satellite receiver, make the audio connections but remove the standard video cable. Do not connect both an S-video and a standard video cable to VIDEO1 at the same time or the picture performance will be unacceptable.

Introduction

Connecting your TV

IN from ANT

OUT to TV

CH 3 CH 4

Rear lower left of TV/DVD

OUT

VIDEO AUDIO

Setting up your TV

Using the TV’s Features

J3R50121A(E)P11-16 12/08/2004, 11:56 AM11

Appendix

Connecting a DVD player with ColorStream (component video) and a VCR

This connection allows you to watch DVD, VCR, or TV programs and record TV programs. You can record from one source while watching a program from another source. Your TV is capable of using ColorStream (component video). Connecting your TV to a component video compatible DVD player, such as a Toshiba DVD player with ColorStream greatly enhance picture quality and performance.

DVD player with Component video

OUT

COLORSTREAM

Connecting your TV

S-VIDEO

Rear lower right of TV

AUDIO

VIDEO

OUT

You will need:

• two coaxial cables

• one set of standard A/V cables

• one set of component video cables

• one pair of standard audio cables

, can

Note:

The ColorStream HD jacks can/ be used with Progressive (480p, 720p) and Interlaced (480i, 1080i) scan systems. A 1080i signal will provide the best picture performance.

The unauthorized recording, use, distribu-

tion or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

From antenna

Stereo VCR

IN from ANT

CH 3 CH 4

OUT to TV

Rear lower left of TV

OUT

VIDEO

AUDIO

J3R50121A(E)P11-16 12/08/2004, 10:49 AM12

Connecting a DTV receiver/set-top box with ColorStream

(component video) and a VCR

Introduction

This connection allows you to watch DTV (digital TV), VCR, and TV programs, and record DTV and TV programs. Your TV has ColorStream

(component video) inputs. Connecting your TV to a DTV receiver with component video can greatly enhance picture quality and realism.

From Antenna

Stereo VCR

IN from ANT

CH 3 CH 4

OUT to TV

OUT

VIDEO

AUDIO

Rear lower right of TV

You will need:

• three coaxial cables

• two sets of standard A/V cables

• one set of standard audio cables

• one set of component video cables

Note:

For HDMI connection see page 15. The ColorStream HD jacks and HDMI jacks can be used with Progressive (480p, 720p) and Interlaced (480i, 1080i) scan systems. If your DTV or HDMI receiver does not have component video, use the S-video and standard audio connections instead. Do not connect both an S-video and a standard video cable to VIDEO1 at the same time or the picture performance will be unacceptable.

The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

Connecting your TV

Setting up your TV

From DTV Antenna

DTV Receiver with

S-VIDEO VIDEO

Component video

COMPONENT VIDEO

Rear lower left

OUT

AUDIO

OUT

of TV

Using the TV’s Features

Appendix

J3R50121A(E)P11-16 12/08/2004, 10:49 AM13

Connecting a camcorder

This connection allows you to watch videos recorded on a camcorder.

VHS Camcorder

S-VIDEO

OUT

AUDIO

VIDEO

Side panel of TV

S-VHS Camcorder

Connecting your TV

AUDIO

VIDEO

S-VIDEO

OUT

Rear lower left of TV

You will need:

• one set of standard AV cables

You will need:

• one S-video cable

• one pair of standard audio cables

Note:

For better picture quality, if your camcorder has S-video, you can use an S-video cable (plus the standard audio cables) instead of a standard video cable. Do not connect both a standard video cable and an S-video cable at the same time, or the picture performance will be unacceptable.

Connecting an audio system

This connection allows you to use an audio amplifier and external speakers, and adjust the audio level using the TV’s remote control. To control the audio, turn on the TV and the stereo amplifier, and turn off the TV's built-in speakers (see “Turning off the built-in speakers” on page 42).

Amplifier

LINE IN LR

Rear lower left of TV

You will need:

• one pair of standard audio cables

Note:

To hear sound when using an external audio amplifier, the volume of both the TV and the amplifier must be set above 0 (zero). For example, if the volume of the TV is set to 0, you will not be able to hear any sound, even if the volume of the amplifier is at its highest level.

J3R50121A(E)P11-16 12/08/2004, 10:49 AM14

Connecting an HDMI™ or a DVI device to the HDMI input

The HDMI uncompressed digital video from an HDMI device or uncompressed digital video from a DVI

This input is designed to accept HDCP in digital form from EIA/CEA-861/861B– compliant consumer electronic devices (such as a set-top box or DVD player with HDMI or DVI output).

The HDMI input is designed for best performance with hight definition video signals. It will accept and display 480i, 480p, 720p and 1080i signals.

Note: The HDMI jack is not intended for connection to

To connect an HDMI device, you will need:

• one HDMI cable (type A connector)

You must set the HDMI audio input setting to HDMI in the AUDIO menu (see page 42).

Some CDVs (Video CDs) may not output digital audio signals. In that case, you may hear sound by connecting analog audio cables. If you do use analog audio cables for this reason, you will need to set the HDMI audio input setting to “D VI” to hear the analog audio (see page 42). Note: If you connect an HDMI device and analog audio cables (as described in the previous paragraph), and then you play media with digital audio output, to hear digital audio you must set the HDMI audio input setting to “HDMI” (page 42).

[1]

input on your TV receives digital audio and

[2]

device.

[3]

program material

[4]

and should not be used with a personal computer. For PC connection see page 16.

For proper operation, it is recommended that you use as short an HDMI cable as possible. You should not encounter difficulty if you use an HDMI cable that is shorter than 16.4ft (5m).

HDMI cable transfers both video and audio. Separate analog audio cables are not required (see illustration below).

HDMI device

VIDEO AUDIO

OUT

HDMI

OUT

[1]

HDMI = High-Definition Multimedia Interface.

[2]

DVI = Digital Video Interface.

[3]

HDCP = High-bandwidth Digital Content Protection.

[4]

EIA/CEA-861/861B compliance covers the transmission of uncompressed digital video with highbandwidth digital content protection, which is being standardized for reception of high-definition video signals. Because this is an evolving technology, it is possible that some devices may not operate properly with the TV.

To ensure that the HDMI or DVI device is reset properly, it is recommended that you follow these procedures:

• When turning on your electronic components, turn on the TV first, and then the HDMI or DVI device.

• When turning off your electronic components, turn off

the HDMI or DVI device first,and then the TV.

To connect a DVI device, you will need:

• one HDMI–to–DVI adapter cable (HDMI type A connector)

For proper operation, the length of an HDMI-to-DVI adapter cable should not exceed 9.8 ft (3m). The recommended length is 6.6 ft (2m).

• one pair of standard analog audio cables

An HDMI-to-DVI adapter cable transfers only video. Separate analog audio cables are required (see illustration below).

You must set the HDMI audio input setting to DVI in the AUDIO menu (see page 42).

DVI device

VIDEO AUDIO

Rear lower right of TV

Introduction

Connecting your TV

Setting up your TV

DVI

OUT

Using the TV’s Features

Rear lower right of TV

HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC.

J3R50121A(E)P11-16 12/08/2004, 10:49 AM15

Appendix

+ 33 hidden pages