Toshiba 22AV605PG Schematic
SERVICE MANUAL
Page
1
of
1
10.08.2016
file://C:\Program Files\zeus\js\!!fcover.html
LCD Color Television
22AV605PG
Ver. 2.00
This model is classified as a green product (*1), as indicated by the underlined serial number. This
Service Manual describes replacement parts for the green product. When repairing this green
product, use the part(s) described in this manual and
For (*1) and (*2), refer to
© TOSHIBA CORPORATION
GREEN PRODUCT PROCUREMENT
lead-free solder (*2).
and
LEAD-FREE SOLDER
.
FIRMWARE UPDATING
Page
1
of 3How to update using a USB Mass
-
storage device
10.08.2016
file://C:\Documents and Settings\Admin\
Рабочий стол
\22AV605PG
-
01\22AV605PG
...
How to update using a USB Mass-storage device
1. Copy the software corresponding to the model to USB Mass-Storage device. (root
directory)
The software should be renamed to
Note:
copying.
Fig.1 USB Mass-storage device
2. Turn TV off, then plug USB Mass-storage device into the USB slot on the TV.
upgrade.pkg
from the original one before
Fig.2 Plugging in USB Mass-storage device into the USB slot on TV
(Viewing from the TV front)
Turn TV on, then a software updating wizard will be displayed. Select "YES" and press
Page
2
of 3How to update using a USB Mass
-
storage device
10.08.2016
file://C:\Documents and Settings\Admin\
Рабочий стол
\
22AV605PG
-
01\22AV605PG
...
Fig.3 Plugging USB Mass-storage device into the USB slot on the TV (Actual view)
3.
"OK" button on the remote control to start the updating.
Fig.4 Updating Wizard
4. Upon completion, the display will show the message.
Fig.5 Updating completion
5. Unplug the USB Mass-storage device, and turn TV off.
Page
3
of 3How to update using a USB Mass
-
storage device
10.08.2016
file://C:\Documents and Settings\Admin\
Рабочий стол
\
22AV605PG
-
01\22AV605PG
...
Fig. 6 Removing USB Mass-storage device
6. Turn TV on and press "MENU" and "0000" on the remote control to confirm a new
software version.
Fig. 7 FW version checking display
FUNCTION AND OPERATION
Page
1
of
2
10.08.2016
file://C:\Documents and Settings\Admin\
Рабочий стол
\22AV605PG
-
01\22AV605PG
...
The Remote Control
A simple at-a-glance reference of your remote control.
Page
2
of
2
10.08.2016
file://C:\Documents and Settings\Admin\
Рабочий стол
\
22AV605PG
-
01\22AV605PG
...
FUNCTION AND OPERATION
Page
1
of
2
10.08.2016
file://C:\Documents and Settings\Admin\
Рабочий стол
\22AV605PG
-
01\22AV605PG
...
Using the Controls
Although all necessary adjustments and controls for the television are normally made using
the remote control, the buttons on the television may be used for some functions.
Switching On
Using the Remote Control
Using the Controls
Page
2
of
2
10.08.2016
file://C:\Documents and Settings\Admin\
Рабочий стол
\
22AV605PG
-
01\22AV605PG
...
FUNCTION AND OPERATION
Page
1
of
3
10.08.2016
file://C:\Documents and Settings\Admin\
Рабочий стол
\22AV605PG
-
01\22AV605PG
...
Tuning the Television
Before switching on the television put your decoder and media recorder to
are connected.
Quick Setup
Standby
if they
Page
2
of
3
10.08.2016
file://C:\Documents and Settings\Admin\
Рабочий стол
\
22AV605PG
-
01\22AV605PG
...
Page
3
of
3
10.08.2016
file://C:\Documents and Settings\Admin\
Рабочий стол
\
22AV605PG
-
01\22AV605PG
...
SAFETY INSTRUCTION
should enter the mouth, rinse the mouth thoroughly with water. If the fluid should contact the
When attaching the LCD module to the LCD cover, position it appropriately and fasten
Page
1
of 4Handling the LCD Module
10.08.2016
file://C:\Documents and Settings\Admin\
Рабочий стол
\22AV605PG
-
01\22AV605PG
...
Handling the LCD Module
Safety Precaution
In the event that the screen is damaged or the liquid crystal (fluid) leaks, do not breathe in or
drink this fluid.
Also, never touch this fluid. Such actions could cause toxicity or skin irritation. If this fluid
skin or clothing, wipe off with alcohol, etc., and rinse thoroughly with water. If the fluid
should enter the eyes, immediately rinse the eyes thoroughly with running water.
Precautions for Handling the LCD Module
CAUTION: The metal edges of the LCD module are sharp, handle it with
care.
The LCD module can easily be damaged during disassembly or reassembly; therefore,
always observe the following precautions when handling the module.
1.
at the position where the display can be viewed most conveniently.
2. Carefully align the holes at all four corners of the LCD module with the corresponding
holes in the LCD cover and fasten with screws. Do not strongly push on the module
because any impact can adversely affect the performance. Also use caution when
handling the polarized screen because it can easily be damaged.
Page
2
of 4Handling the LCD Module
10.08.2016
file://C:\Documents and Settings\Admin\
Рабочий стол
\
22AV605PG
-
01\22AV605PG
...
3. If the panel surface becomes soiled, wipe with cotton or a soft cloth. If this does not
remove the soiling, breathe on the surface and then wipe again.
If the panel surface is extremely solied, use a CRT cleaner as a cleaner. Wipe off the
panel surface by drop the cleaner on the cloth. Do not drop the cleaner on the panel.
Pay attention not to scratch the panel surface.
4. Leaving water or other fluids on the panel screen for an extended period of time can
result in discoloration or stripes. Immediately remove any type of fluid from the screen.
5. Glass is used in the panel, so do not drop or strike with hard objects. Such actions can
damage the panel.
6. CMOS-LSI circuitry is used in the LCD module, so avoid damage due to static
Page
3
of 4Handling the LCD Module
10.08.2016
file://C:\Documents and Settings\Admin\
Рабочий стол
\
22AV605PG
-
01\22AV605PG
...
electricity. When handling the module, use a wrist ground or anchor ground.
7. Do not expose the LCD module to direct sunlight or strong ultraviolet rays for an
extended period of time.
8. Do not store the LCD module below the temperature conditions described in the
specifications. Failure to do so could result in freezing of the liquid crystal due to cold
air or loss of resilience or other damage.
9. Do not disassemble the LCD module. Such actions could result in improper operation.
Page
4
of 4Handling the LCD Module
10.08.2016
file://C:\Documents and Settings\Admin\
Рабочий стол
\
22AV605PG
-
01\22AV605PG
...
10. When transporting the LCD module, do not use packing containing epoxy resin
(amine) or silicon resin (alcohol or oxim). The gas generated by these materials can
cause loss of polarity.
SAFETY INSTRUCTION
Always keep tools, components of the product, etc away from the children, These items
Page
1
of
4
10.08.2016
file://C:\Documents and Settings\Admin\
Рабочий стол
\22AV605PG
-
01\22AV605PG
...
WARNING: BEFORE SERVICING THIS CHASSIS, READ THE "SAFETY
PRECAUTION" AND "PRODUCT SAFETY NOTICE" INSTRUCTIONS BELOW.
Safety Precaution
WARNING: SERVICING SHOULD NOT BE ATTEMPTED BY ANYONE
UNFAMILIAR WITH THE NECESSARY PRECAUTIONS ON THIS RECEIVER.
THE FOLLOWING ARE THE NECESSARY PRECAUTIONS TO BE OBSERVED
BEFORE SERVICING THIS CHASSIS.
1. An isolation transformer should be connected in the power line between the receiver
and the AC line before any service is performed on the receiver.
2. Always disconnect the power plug before any disassembling of the product. It may
result in electrical shock.
3. When replacing a chassis in the cabinet, always be certain that all the protective
devices are put back in place, such as nonmetallic control knobs, insulating covers,
shields, isolation resistor-capacitor network, etc.
4.
may cause injury to children.
5. Depending on the model, use an isolation transformer or wear suitable gloves when
servicing with the power on, and disconnect the power plug to avoid electrical shock
when replacing parts. In some cases, alternating current is also impressed in the
chassis, so electrical shock is possible if the chassis is contacted with the power on.
6. Always use the replacement parts specified for the particular model when making
repairs. The parts used in products require special safety characteristics such as
Loading...