The LCD display panels are manufactured using an extremely high level of precision technology,
however sometimes some parts of the screen may be missing picture elements or have luminous
spots. This is not a sign of a malfunction.
Please take note
EXCLUSION CLAUSE
Toshiba shall under no circumstances be liable for loss and/or damage to the product caused
by ;
i) fire;
ii) earthquake;
iii) accidental damage;
iv) intentional misuse of the product;
v) use of the product in improper conditions;
vi) loss and/or damage caused to the product whilst in the possession of a third party;
vii) any damage or loss caused as a result of the owner’s failure and/or neglect to follow
the instructions set out in the owner’s manual;
viii) any loss or damage caused directly as a result of misuse or malfunction of the
product when used simultaneously with associated equipment;
Furthermore, under no circumstances shall Toshiba be liable for any consequential loss
and/or damage including but not limited to the following, loss of profit, interruption of
business, the loss of recorded data whether caused during normal operation or misuse of
the product.
Stationary Image
If stationary images generated by teletext, channel identification logos, computer displays,
video games, on screen menus, etc. are left on the TV screen for any length of time they
could become conspicuous, it is always advisable to reduce both the brightness and contrast
settings.
Cleaning the screen and the cabinet...
After turning off the power, clean the screen and the cabinet with a soft, dry cloth. We
recommend that you do not use any proprietary polishes or solvents on the screen or cabinet
as this may cause damage.
Disposal...
The cold cathode fluorescent lamp in the LCD panel contains a small amount of mercury,
when the set reaches the end of its useful life please dispose of it in accordance with Local
Government Regulations or at a recycling centre.
ENGLISH -4-
L5Atoshing.fh11 6/7/05 2:53 PM Page 4
Television
Thank you for buying this television which is designed to give you many years of satisfactory
service.
You may already be familiar with using a television but do please take time to read these instructions.
They are designed to familiarise you with the unit’s many new features and to ensure you get the
very best out of your purchase.
Special Features
• 16,722,216 color (8 byte)
• Available for Cable Channels (A decoder may be required)
• Wide angle perspective
• SCART socket for 14 VL 44, 2 SCART sockets for 20 VL 44, AV Socket and external sound
system connection
• Minimum energy consumption
• AVL – Automatic Volume Limiting
• ATS – Automatic Tuning System
• Blue back
• Intelligent program switch
• Programmed power on
• Programmed power off
• Graphic equalizer
• On screen viewing of all control commands, program numbers and additional features
• Manual Fine Tuning
• 100 Program memory
• Infrared Remote Control
• Child Lock
ENGLISH -5-
L5Atoshing.fh11 6/7/05 2:53 PM Page 5
For your safety
This equipment has been designed and manufactured to meet international safety standarts but,
like any electrical equipment, care must be taken if you are to obtain the best results and safety is
to be assured. So, please read the points below for your own safety. They are of a general nature,
intended to help you with all your electronic consumer products and some points may not apply
to the goods you have just purchased.
Air Circulation...
Leave at least 10 cm clearance around the television
to allow adequate ventilation. This will prevent the
TV from overheating and consequential possible
damage to the TV. Dusty places should also be
avoided.
Heat Damage...
Damage may occur if you leave the TV in direct
sunlight or near a heater. Avoid places subject to
extremely high temperatures or humidity, or locations
where the temperature is likely to fall below 5 C
(41F).
Mains Supply...
The mains supply required for this equipment is
110 - 240 V AC 50 Hz. Your TV set is designed
to operate with the adapter provided. The adaptor
will become hot during use, this is normal. ONLY
USE THE ADAPTOR SUPPLIED WITH THIS TV. Use
only the power cord supplied with the unit. Never
connect to a DC supply or any other power source.
DO ensure that the TV is not standing on the mains
lead. DO NOT cut off the mains plug from this
equipment, this incorporates a special Radio
Interference Filter, the removal of which will impair
its performance. In the UK, the fuse fitted in this
plug is approved by ASTA or BSI to BS1362. It
should only be replaced by a correctly rated and
approved type and the fuse cover must be refitted.
IF IN DOUBT PLEASE CONSULT A COMPETENT
ELECTRICIAN.
Do...
DO read the operating instructions before you
attempt to use the equipment.
DO ensure that all electrical connections (including
the mains plug, extension leads and inter-connections
between pieces of equipment) are properly made
and in accordance with the manufacturers
instructions. Switch off and withdraw the mains
plug before making or changing connections.
DO consult your dealer if you are ever in doubt
about the installation, operation or safety of your
equipment.
DO be careful with glass panels or doors on
equipment.
Do not...
DON’T remove any fixed cover as this may expose
dangerous voltages.
DON’T obstruct the ventilation openings of the
equipment with items such as newspapers,
tablecloths, curtains, etc. Overheating will cause
damage and shorten the life of the equipment.
DON’T allow electrical equipment to be exposed
to dripping or splashing or objects filled with liquids,
such as vases, to be placed on the equipment.
DON’T place hot objects or naked flame sources,
such as lighted candles or nightlights on, or close
to equipment. High temperatures can melt plastic
and lead to fires.
DON’T use makeshift stands and NEVER fix legs
with wood screws. To ensure complete safety,
always fit the manufacturer’s approved stand or
legs with the fixings provided according to the
instructions.
DON’T listen to headphones at high volume, as
such use can permanently damage your hearing.
DON’T leave equipment switched on when it is
unattended, unless it is specifically stated that it is
designed for unattended operation or has a standby
mode. Switch off using the switch on the equipment
and make sure your family know how to do this.
Special arrangements may need to be made for
infirm or disabled people.
DON’T continue to operate the equipment if you
are in anay doubt about it working normally, or it
is damaged in any way – switch off, withdraw the
mains plug and consult your dealer.
ABOVE ALL – NEVER let anyone, especially
children, push anything into holes, slots or
any other openings in the case – this could
result in a fatal electric shock.
NEVER guess or take chances with electrical
equipment of any kind – it is better to be
safe than sorry.
THE MAINS PLUG IS USED TO COMPLETELY
DISCONNECT THE TELEVISION AND
THEREFORE SHOULD BE EASILY ACCESSIBLE.
ENGLISH -6-
L5Atoshing.fh11 6/7/05 2:53 PM Page 6
Where to install
Locate the television away from direct sunlight and strong lights, soft, indirect lighting is recommended
for comfortable viewing. Use curtains or blinds to prevent direct sunlight falling on the screen.
Place on a sturdy platform, the mounting surface should be flat and steady It should then be secured
to the wall with a sturdy tie using the hook that is under the removable cover, or secured to the
platform.
The LCD display panels are manufactured using an extremely high level of precision technology,
however sometimes some parts of the screen may be missing picture elements or have luminous spots.
This is not a sign of a malfunction.
Make sure the television is located in a position where it cannot be pushed or hit by objects, as
pressure will break or damage the screen, and that small items cannot be inserted into slots or openings
in the case.
ENGLISH -7-
L5Atoshing.fh11 6/7/05 2:53 PM Page 7
Getting started
Remove your Television carefully from the box.
You may wish to store the packaging for future
use.
In the box
Inside the carton box you should have:
• Accessories box
• Power cord
• Adapter
• Remote control
• Batteries
Note: Scart, VGA and RCA leads are not supplied.
Aerial connection
To connect an aerial, plug the aerial lead
into the aerial socket on the rear of the TV.
14 VL 4420 VL 44
You can use an outdoor or indoor aerial.
However, if you use an indoor aerial the quality
of the reception may be reduced and adjustment
of the aerial may be required when changing
programs.
Please note: If you live in a poor reception
area or use an indoor aerial you may experience
loss or corruption of teletext transmissions.
Switching on and First Use
1. Connect the power cord to the mains plug.
2.
Connect the input socket of the adapter to
the DC socket at the back panel of the LCD
TV.
3. Connect adapter to the mains plug.
Please Note: When not in use disconnect the
plug
from the mains power supply.
4. Press the Power button on the
side of the TV. The standby indicator
will turn red.
5. Press a Numeric button or the
() or () button on the remote
handset or (
panel to switch the TV on.
The standby indicator will turn blue.
The picture will appear after a few
seconds.
Press the (
to standby. The standby indicator will
turn red.
Please Note: Do not leave the television in
standby unattended or overnight.
Switching the TV on for the first time
To install your TV, please read the sections
“TV controls” and “Tuning the television”.
The batteries
Remove the back cover of your remote control to
reveal the battery compartment and make sure
you insert the batteries the right way round.
Suitable battery types for this remote are
UM-4, IEC R03 or AAA 1.5V.
Do not throw your old batteries into a fire, dispose
of them in a designated disposal area.
Do not combine a used, old battery with a new
one or mix battery types.
The performance of the remote control will
deteriorate beyond a distance of 8 metres or
outside an angle of 30 degrees from the centre
of the TV.
), () on the top
) button to switch the TV
Note 1: Your TV will move to stand-by mode
in five minutes when there is no broadcast signal.
Note 2: Your TV is equiped to operate with
front panel buttons, “MENU”, “
+” in case your R/C is broken or the
“batteries are exhausted.
ENGLISH -8-
”,
L5Atoshing.fh11 6/7/05 2:53 PM Page 8
Control Unit
14VL4420VL44
16
17 18 19 20
16 17 18 19 20
1
86 721
Top control units
MENU
1617181920
1.
Speaker
Timer indicator
2.
Stand-by
3.
Remote control
4.
Power on / off
5.
Scart (2 Scarts for 20 VL 44)
6.
Antenna input
7.
234
8.
9.
10.
11.
12.
13.
14.
5
P
Headphone
Audio out (R,L)
Audio RCA (L)
Audio RCA (R)
Video input PHONO connector
S-VHS
DC Power supply input
1
AUDIO OUT
234
5
86721
AV
AVS
L R VIDEOL RS-VHS
1110121391415
15.
VGA
Volume down
16.
Volume up
17.
Menu button
18.
Program down
19.
Program up
20.
Removable back cover
21.
VGA
DC
Please note
• Do not use Video RCA and S-Video connections at the same time, otherwise they will effect the picture.
• RGB inputs from scart will give you better picture quality.
ENGLISH -9-
Loading...
+ 18 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.