Toshiba 14AF45, 20AF45 User Manual

Download

Page 1

Safeguards

Important

Welcome to

Toshiba

Connecting

your TV

Remote Control

Using the

Setting up

your TV

Using the TV’s

Features

14AF45 20AF45

J3S00121A(E)_COVER 13/01/2005, 5:41 PM1

Appendix

Page 2

Dear Customer,

Thank you for purchasing this Toshiba TV. This manual will

Important

help you use the many exciting features of your new TV.

Safeguards

Before operating the TV, please read this manual completely, and keep it nearby for future reference.

Child Safety

It Makes A Difference Where Your TV Stands

Safety Precautions

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE P ARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning symbol in the triangle tells you that the voltage inside this product may be strong enough to cause an electric shock. DO NOT TRY TO SERVICE THIS PRODUCT YOURSELF.

The exclamation mark in the triangle tells you that important operating and maintenance instructions follow this symbol.

CAUTION: To reduce the risk of electric shock, do not use the polarized plug with an extension cord, receptacle, or other outlet unless the blades can be inserted completely to prevent blade exposure.

Congratulations on your purchase! As you enjoy your new TV, keep these safety tips in mind:

The Issue

 If you are like most consumers, you have a TV in your home.

Many homes, in fact, have more than one TV.

 The home theater entertainment experience is a growing

trend, and larger TVs are popular purchases; however, they are not always supported on the proper TV stands.

 Sometimes TVs are improperly secured or inappropriately

situated on dressers, bookcases, shelves, desks, audio speakers, chests, or carts. As a result, TVs may fall over, causing unnecessary injury.

Toshiba Cares!

 The consumer electronics industry

is committed to making home

entertainment enjoyable and safe.

 The Consumer Electronics

Association formed the Home

Entertainment Support Safety

Committee, comprised of TV and consumer electronics furniture

manufacturers, to advocate

children’s safety and educate

consumers and their families about

television safety.

NOTE TO CATV INSTALLERS

This is a reminder to call the CATV system installer’s attention to Article 820-40 of the NEC, which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. For additional antenna grounding information, see items 25 and 26 on page 4.

NOTICE OF POSSIBLE ADVERSE EFFECTS

ON TV PICTURE TUBE

If a fixed (non-moving) pattern remains on the TV screen for long periods of time, the image can become permanently ingrained in the picture tube. This type of

damage is NOT COVERED BY YOUR WARRANTY.

See item 33 on page 4.

Tune Into Safety

 One size does NOT fit all! Use appropriate

furniture large enough to support the weight of your

TV (and other electronic components).

 Use appropriate angle braces, straps, and anchors to secure

your furniture to the wall (but never screw anything directly into the TV).

 Carefully read and understand the other enclosed

instructions for proper use of this product.

 Do not allow children to climb on or play with furniture

and TVs.

 Avoid placing any item on top of your TV (such as a VCR,

remote control, or toy) that a curious child may reach for.

 Remember that children can become excited while watching

a program and can potentially push or pull a TV over.

 Share our safety message about this hidden hazard of

home with your family and friends. Thank you!

2500 Wilson Blvd. Arlington, VA 22201 U.S.A. Tel. 703-907-7600 Fax 703-907-7690 www.CE.org

CEA is the Sponsor, Producer and

0303

Manager of the International CES

the

J3S00121A(E)_P02-06 13/01/2005, 5:41 PM2

Page 3

Important Safety Instructions

QUALIFIED

SERVICE

TECHNICIAN

Installation, Care, and Service

Safeguards

Important

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near

water.

6) Clean only with a dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

Wide plug

Installation

Follow these recommendations and precautions and heed all warnings when installing your TV:

16) Never modify this equipment. Changes or modifications may void: a) the warranty, and b) the user’s authority to operate this equipment under the rules of the Federal Communications Commission.

17) DANGER: RISK OF SERIOUS PERSONAL

INJURY, DEATH, OR EQUIPMENT DAMAGE! Never place the TV on

an unstable cart, stand, or table. The TV may fall, causing serious personal injury, death, or serious damage to the TV.

18) Never place or store the TV in direct sunlight; hot, humid areas; areas subject to excessive dust or vibration; or locations with temperatures at or below 41°F (5°C).

19) Always place the TV on the floor or a sturdy, level, stable surface that can support the weight of the unit.

Welcome to

Toshiba

Connecting

your TV

Remote Control

Using the

10) Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where it exits the apparatus.

11) Only use attachments/accessories specified by the

manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use

caution when moving the cart/apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during

lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15) CAUTION: To reduce the risk of electric shock, do

not use the polarized plug with an extension cord, receptacle, or other outlet unless the blades can

be inserted completely to prevent blade exposure.

20) Never place items such as vases, aquariums, or candles on top of the TV.

21) Never block or cover the slots or openings in the TV cabinet back, bottom, and sides. Never place the TV:

• on a bed, sofa, rug, or similar

surface;

• too close to drapes, curtains,

or walls; or

• in a confined space such as a

bookcase, built-in cabinet, or any other place with poor ventilation.

The slots and openings are provided to protect the TV from overheating and to help maintain reliable operation of the TV.

22) Never allow anything to rest on or roll over the power cord, and never place the TV where the power cord is subject to wear or abuse.

23) Never overload wall outlets and extension cords.

0303

Setting up

your TV

Using the TV’s

Features

Appendix

J3S00121A(E)_P02-06 13/01/2005, 5:41 PM3

Page 4

24) Always operate this equipment from

Ground clamp

Antenna discharge unit (NEC Section 810-20)

Grounding conductors (NEC Section 810-21)

Power service grounding electrode system (NEC Art 250 Part H)

Ground clamps

Antenna lead-in wire

Electric service equipment

QUALIFIED

SERVICE

TECHNICIAN

Important

Safeguards

a 120V AC, 60 Hz power source only.

30) [This item applies to projection TVs only.] If the air temperature rises suddenly (for example, when the TV is first delivered), condensation may form on the lenses. This can make the picture appear distorted or the color appear faded. If this happens, turn off the TV for 6 to 7 hours to allow the condensation to evaporate.

25) Always make sure the antenna system is properly grounded to provide adequate protection against voltage surges and built-up static charges (see Section 810 of the National Electric Code).

26) DANGER: RISK OF SERIOUS PERSONAL

INJURY OR DEATH!

• Use extreme care to make sure you are never in a position where your body (or any item you are in contact with, such as a ladder or screwdriver) can accidentally touch overhead power lines. Never locate the antenna near overhead power lines or other electrical circuits.

• Never attempt to install any of the following during lightning activity: a) an antenna system; or b) cables, wires, or any home theater component connected to an antenna or phone system.

Care

For better performance and safer operation of your TOSHIBA TV, follow these recommendations and precautions:

27) Always sit approximately 10–25 feet away from the TV and as directly in front of it as possible. The picture can appear dull if you sit too far to the left or right of the TV, or if sunlight or room lights reflect on the screen. Turn the TV off to check for reflections on the screen, and then remove the source of reflections while viewing the TV.

28) Always unplug the TV before cleaning. Never use liquid or aerosol cleaners.

31) For added protection of your TV from lightning and power surges, always unplug the power cord and disconnect the antenna from the TV if you leave the TV unattended or unused for long periods of time.

32) During normal use, the TV may make occasional snapping or popping sounds. This is normal, especially when the unit is being turned on or off. If these sounds become frequent or continuous, unplug the power cord and contact a Toshiba Authorized Service Center.

33) Possible Adverse Effects on TV Picture Tube: If a fixed (non-moving) pattern remains on the TV screen for long periods of time, the image can become permanently ingrained in the picture tube and cause subtle but permanent ghost images. This type of damage is NOT COVERED BY YOUR WARRANTY. Never leave your TV on for long periods of time while it is displaying the following formats or images:

• Fixed Images, such as PIP/POP windows, stock tickers,

video game patterns, TV station logos, closed captions, and websites.

• Special Formats that do not use the entire screen. For

example, viewing letterbox style (16:9) media on a normal (4:3) display (gray bars at top and bottom of screen); or viewing normal style (4:3) media on a widescreen (16:9) display (gray bars on left and right sides of screen).

Service

34) WARNING: RISK OF ELECTRIC

SHOCK! Never attempt to service the

TV yourself. Opening and removing the covers may expose you to dangerous voltage or other hazards. Refer all servicing to a Toshiba Authorized Service Center.

35) If you have the TV serviced:

• Ask the service technician to use only replacement parts

specified by the manufacturer.

• Upon completion of service, ask

the service technician to perform routine safety checks to determine that the TV is in safe operating condition.

J3S00121A(E)_P02-06 13/01/2005, 5:41 PM4

29) WARNING: RISK OF ELECTRIC SHOCK! Never spill liquids or push objects of any kind into the TV cabinet slots.

36) When the TV reaches the end of its useful life, ask a qualified service technician to properly dispose of the TV. Improper disposal may result in a picture tube implosion and possible personal injury.

0303

Page 5

Important Safety Information .......................................................................................... 2-4

Welcome to Toshiba ............................................................................................................ 6

Exploring your new TV ................................................................................................................................6

Selecting a location for the TV ....................................................................................................................6

Connecting your TV ............................................................................................................ 7

Connecting a VCR .......................................................................................................................................7

Connecting a cable converter box ............................................................................................................... 8

Connecting a DVD player/satellite receiver and a VCR ..............................................................................9

Connecting a DVD player with ColorStream® (component video) and a VCR ............................................ 9

Connecting a camcorder ........................................................................................................................... 10

Using the remote control................................................................................................... 11

Installing the remote control batteries ....................................................................................................... 11

Learning about the remote control ............................................................................................................ 11

Setting up your TV ............................................................................................................ 12

Changing the on-screen display language ................................................................................................ 12

Adding channels to the TV’s memory ........................................................................................................ 13

Programming channels automatically ................................................................................................ 13

Adding and erasing channels manually ............................................................................................. 13

Changing channels .................................................................................................................................... 13

Using the TV’s features .................................................................................................... 14

Adjusting the channel settings ................................................................................................................... 14

Switching between two channels ....................................................................................................... 14

Programming your favorite channels .................................................................................................14

Using theV-Chip (parental control) feature (U.S. V-Chip system only) .....................................................15

Selecting a PIN code .......................................................................................................................... 15

Blocking programs by ratings .............................................................................................................16

Blocking unrated movies or programs ................................................................................................ 19

Using the LOCK menu ............................................................................................................................... 19

Locking channels ................................................................................................................................19

Locking video input .............................................................................................................................20

Setting the GameTimerTM...........................................................................................................................20

Labeling channels ......................................................................................................................................21

Setting the clock ........................................................................................................................................ 22

Setting the ON/OFF timer ..........................................................................................................................22

Setting the on timer ............................................................................................................................ 22

Setting the off timer ............................................................................................................................ 23

Adjusting the picture quality ......................................................................................................................24

Watching video input .................................................................................................................................24

Specifying the ColorStream® setting ......................................................................................................... 24

Displaying on-screen information ..............................................................................................................24

Setting the sleep timer ...............................................................................................................................25

Using the closed caption feature ...............................................................................................................25

Changing the picture size ..........................................................................................................................25

Adjusting the sound ...................................................................................................................................26

Muting the sound ................................................................................................................................26

Selecting stereo/SAP broadcasts .......................................................................................................26

Adjusting the sound quality ................................................................................................................ 27

Using the surround sound feature ...................................................................................................... 27

Using the StableSound® feature ......................................................................................................... 28

Auto power off ............................................................................................................................................ 28

Understanding the Power Return feature ..................................................................................................28

Appendix ............................................................................................................................ 29

Troubleshooting ......................................................................................................................................... 29

Specifications............................................................................................................................................. 30

Limited United States Warranty ................................................................................................................. 31

Safeguards

Important

Welcome to

Toshiba

Connecting

your TV

Remote Control

Using the

Setting up

your TV

Using the TV’s

Features

J3S00121A(E)_P02-06 13/01/2005, 5:41 PM5

Appendix

Page 6

Welcome to Toshiba

16:9

Congratulations! You have purchased one of the finest color TVs on the market. The goal of this manual is to guide you through setting up and operating your Toshiba TV as quickly as possible. You may need to purchase other audio or video cables to connect your equipment. See “Connecting your TV” on page 7 for more information.

Please read all the safety and operating instructions carefully before you begin.

Exploring your new TV

You can operate your TV by using the buttons on the front panel or the

Toshiba

Welcome to

remote control. The front and back panels provide all the inputs you will need to connect other equipment to your TV.

14AF45

POWER

Remote

sensor

Channel

Power

indicator

Audio(L/R)/Video In

Volume

Phones

20AF45

TV front panel

VIDEO 1

ANT (75Ω)

VIDEO

L/MONO

AUDIOS-VIDEO

TV back panel

Selecting a location for the TV

• Place the TV on the floor or on a sturdy platform in a location where light does not directly hit the screen.

• Place the TV far enough from the walls to allow proper ventilation. Inadequate ventilation may cause overheating, which may damage the TV.

J3S00121A(E)_P02-06 13/01/2005, 5:41 PM6

Page 7

Connecting your TV

• A coaxial cable is the standard cable that comes in from your antenna or cable converter box. Coaxial cables use “F” connectors.

• Standard A/V (audio/video) cables are usually color coded according to use: yellow for video and red and white for audio. The red audio cable is for the stereo right channel, and the white audio cable is for the stereo left (or mono) channel. If you look at the rear panel of the TV, you will see that the terminals are color coded in the same manner as the cables.

• An S-video cable provides better picture performance than a standard video cable. S-video cables can only be used with S-video compatible components.

• Component video cables come in sets of three and provide the best picture performance. Component video cables can only be used with component video compatible components.

ANTENNA

Coaxial Cable

S-Video

Cable

NOTICE: RISK OF EQUIPMENT DAMAGE!

Do not plug in any power cords until you have finished connecting all equipment.

Safeguards

Important

Welcome to

Toshiba

Connecting

your TV

AUDIO Cables

VIDEO

Cable

Component video

Cables

Connecting a VCR

This connection allows you to watch local channels and video programs, play or record on the VCR while watching TV, and record from one channel while watching another channel.

VIDEO 1

OUT

VIDEO

Stereo VCR

AUDIO

Cable Lead-in from cable box or antenna

ANT (75Ω)

IN from ANT

CH 3 CH 4

VIDEO

L/MONO

AUDIOS-VIDEO

OUT to TV

You will need:

• two coaxial cables

• one set of standard A/V cables

Note:

If using a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable. For better picture quality, if your VCR has Svideo, you can use an S-video cable instead of the standard video cable. Do not connect a standard video cable and an S-video cable to VIDEO1 simultaneously.

The unauthorized recording, use, distribution or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

Remote Control

Using the

Setting up

your TV

Using the TV’s

Features

Appendix

J3S00121A(E)_P07-13 13/01/2005, 5:41 PM7

Page 8

Connecting a cable converter box

This television has an extended tuning range and can tune most cable channels without using a cable company supplied converter box. Some cable companies offer “premium pay channels” in which the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device, which is generally provided by the cable company.

For Subscribers to Basic Cable TV Service

For basic cable service not requiring a Converter/Descrambler box, connect the CATV 75 ohm Coaxial Cable directly to the Antenna Jack on the back of the television.

For Subscribers to Scrambled Cable TV Service

If you subscribe to a cable service that requires the use of a Converter/ Descrambler box, connect the incoming cable to the Converter/ Descrambler box and connect the output of the box to the Antenna Jack on the back of the television. Follow the connections shown below. Set the television to the output of the Converter/Descrambler box (usually channel 3 or 4) and use the Converter/Descrambler box to select channels.

your TV

Connecting

For Subscribers to Unscrambled Basic Cable with Scrambled Premium Channels

If you subscribe to a cable service in which basic cable channels are unscrambled and premium channels require the use of a Converter/ Descrambler box, you may wish to use a two-set signal splitter (sometimes called a “two-set coupler”) and an A/B Switch box from the cable installer or an electronics supply store. Follow the connections shown below. With the switch in the “B” position, you can directly tune any nonscrambled channels on your TV. With the switch in the “A” position, tune your TV to the output of the Converter/Descrambler box (usually channel 3 or 4) and use the box to tune scrambled channels.

Note:

When you use a converter box with your TV, there may be features that you cannot program using the remote control, such as labeling channels, blocking channels, and programming your favorite channels.

Incoming CATV

Converter/Descrambler

AUDIOS-VIDEO

VIDEO 1

ANT (75Ω)

B SwitchSplitter

VIDEO

L/MONO

J3S00121A(E)_P07-13 13/01/2005, 5:41 PM8

Page 9

Safeguards

Important

Connecting a DVD player/satellite receiver and a VCR

This connection allows you to watch DVD/satellite, VCR, or TV programs.

To satellite

DVD player/ Satellite Receiver

VIDEO AUDIO

Satellite IN

S-VIDEO

OUT to TV

OUT

Stereo VCR

IN from ANT

CH 3 CH 4

OUT to TV

OUT

VIDEO AUDIO

ANT (75Ω)

VIDEO

L/MONO

AUDIOS-VIDEO

VIDEO 1

You will need:

• three coaxial cables

• two sets of standard A/V cables

• one S-video cable

Note:

You can use a standard video cable instead of the S-video cable, but the picture quality will decrease. If you use an S-video cable between the TV and DVD player/satellite receiver, make the audio connections but remove the standard video cable. Do not connect both an S-video and a standard video cable to VIDEO1 at the same time or the picture performance will be unacceptable.

Welcome to

Toshiba

Connecting

your TV

Remote Control

Using the

Connecting a DVD player with ColorStream

(component video) and a VCR

This connection allows you to watch DVD, VCR, or TV programs and record TV programs. You can record from one source while watching a program from another source. Your TV is capable of using ColorStream (component video). Connecting your TV to a component video compatible DVD player, such as a Toshiba DVD player with ColorStream greatly enhance picture quality and performance.

AUDIO

OUT

VIDEO

OUT

VIDEO

COLORSTREAM

YCbCr

AUDIO

To antenna

DVD player with ColorStream

S-VIDEO

ANT (75Ω)

VIDEO

L/MONO

AUDIOS-VIDEO

VIDEO 1

Stereo VCR

IN from ANT

CH 3 CH 4

OUT to TV

, can

You will need:

• two coaxial cables

• one set of component video cables

• one pair of standard audio cables

Note:

The ColorStream inputs on this TV are for use with devices that output 480i interlaced signals ONLY. This TV will not accept or display 480p or 720p progressive scan signals or 1080i interlaced high-definition signals. If you connect a high-definition settop receiver, 480p progressive scan DVD player, or other similar device to the TV’s ColorStream inputs, YOU MUST SWITCH THE DEVICE’S OUTPUT TO 480i INTERLACED MODE FIRST. Failure to do this will cause a poor picture or no picture to display.

Setting up

your TV

Using the TV’s

Features

Appendix

J3S00121A(E)_P07-13 13/01/2005, 5:41 PM9

Page 10

Connecting a camcorder

This connection allows you to watch video materials recorded on a camcorder.

your TV

Connecting

Front Panel of TV

VIDEO

OUT

Camcorder

AUDIO

VIDEO 2 L/MONO

AUDIO

You will need:

• one set of standard A/V cables

Note:

For better picture quality, if your camcorder has S-video, you can connect an S-video (and standard audio cables) to VIDEO1 on the back of the TV. Do not connect a standard video cable and an S-video cable to VIDEO1 simultaneously.

R PHONESR

J3S00121A(E)_P07-13 13/01/2005, 5:41 PM10

Page 11

Using the remote control

Installing the remote control batteries

To install the batteries:

1. Open the battery cover on the back of the remote control.

2. Install two “AAA” size batteries. Match the + and – signs on the

batteries to the signs on the battery compartment.

Caution:

• Never throw batteries into a fire.

Notes:

• Be sure to use AAA size batteries.

• Dispose of batteries in a designated

disposal area.

• Attention should be drawn to the environmental aspects of battery disposal.

• Do not mix different battery types or combine used batteries with new ones.

• If the remote control does not operate correctly, or if the operating range becomes reduced, replace both batteries with new ones.

• If the batteries are dead or if you will not be using the remote control for a long time, remove the batteries to prevent battery acid from leaking into the battery compartment.

Safeguards

Important

Welcome to

Toshiba

Connecting

your TV

3. Close the battery cover on the remote control until the lock snaps.

Learning about the remote control

POWER turns the TV on and off

CHANNEL NUMBERS allow direct access to channels (page 13)

RECALL displays status information on-screen (page 24)

SLEEP programs the TV to turn off at a set time (page 25)

MUTE turns off the sound (page 26)

CH + / – cycles through programmed channels (page 13)

VOLUME + / – adjusts the volume level

MENU/ENTER allows access to programming menus, and sets

programmed menu information (page 12)

EXIT closes on-screen menus (page 12)

CAP/TEXT turns closed captions or text on and off (page 25)

1/2 selects closed caption/text channel 1 or 2 (page 25)

RESET returns settings to preset factory formats (pages 24 and 27)

CH RTN (Channel Return) returns to the last viewed channel

(page 14)

MTS switches among STEREO, SAP, and MONO sound (page 26)

POWER

Channel

Numbers

Sleep

CH +/-

Menu/Enter

CAP/TEXT

Reset

TV/Video

16:9

Recall

Mute

Volume +/Exit

1/2 MTS

CH RTN (Channel Return) FAV ▲/▼ (Favorite Channels)

Remote Control

Using the

Setting up

your TV

Using the TV’s

Features

TV/VIDEO selects the video input source (page 24)

FAV ▲/▼ (Favorite Channels) cycle through favorite channels

(page 14)

16:9 toggles the aspect ratio between 4:3 (letterbox) and 16:9 (wide

screen) modes (page 25)

J3S00121A(E)_P07-13 13/01/2005, 5:41 PM11

Appendix

Page 12

Setting up your TV

After you have installed the batteries and programmed the remote control, you need to set some preferences on the TV using the menu system. You can access the menu system with the buttons on the remote control.

• When you make a menu selection, your changes occur immediately. You do not have to press MENU or EXIT to see your changes.

• After five seconds, the menu screen will automatically close if you do not make a selection. Your changes will still be saved.

• When you are finished programming the menus, press EXIT.

Changing the on-screen display language

You can choose from three different languages (English, French, and Spanish) for the on-screen display of adjustment menus and messages.

To select a language:

1. Press MENU, then press

PICTURE AUDI O SETUPCHOPTION

LANGUAGE CH LABEL START

FAVORITE CH V-CHIP LOCK ON/OFF TIMER COLORSTREAM

SELECT ADJUST

2. Press

c or d to highlight LANGUAGE.

ENGLISH

START START START OFF DVD

a or b until the OPTION menu appears.

c d a b

Exit

your TV

Setting up

PICTURE AUDI O SETUPCHOPTION

LANGUAGE

CH LABEL START FAVORITE CH V-CHIP LOCK ON/OFF TIMER COLORSTREAM SELECT ADJUST

3. Press

a or b to highlight your desired language.

ENGLISH FRANCAIS ESPANOL

START START START OFF DVD

J3S00121A(E)_P07-13 13/01/2005, 5:41 PM12

Page 13

Adding channels to the TV’s memory

When you press CH +/- on the remote control or CHANNEL c/d on the TV front panel, your TV will stop only on the channels stored in the TV’s channel memory. Follow the steps below to program channels into the memory.

Safeguards

Important

Programming channels automatically

Your TV can automatically detect all active channels and store them in its memory. After the TV has stored the channels in its memory automatically, you can add or erase specific channels manually.

To add channels automatically:

1. Press MENU, then press a or b to display the SETUP menu.

2. Press

3. Press a or b to highlight either TV

4. Press

c or d until the TV/CABLE

selection is highlighted.

or CABLE, depending on which you use.

If you use an antenna, choose TV. If you use cable, choose CABLE.

d to select CH PROGRAM.

PICTURE AUDIO SETUP OPTION

TV / CABLE TV CABLE

CH PROGRAM

ADD / ERASE

SELECT ADJUST

START

ADD

Press a or b to start channel programming. The TV will automatically cycle through all the TV or Cable channels (depending on which you selected), and store all active channels in the channel memory. While the TV is cycling through the channels, the message “PROGRAMMING NOW-PLEASE WAIT” appears.

6. When channel programming is complete, the message “COMPLETED” appears.

7. Press CH + or – to view the programmed channels.

Adding and erasing channels manually

After you have programmed the channels automatically, you can add or erase specific channels manually.

To add or erase channels manually:

1. Select the channel you want to add or erase. If you are adding a channel, you must select the channel using the Channel Number buttons.

2. Press MENU, then press display the SETUP menu.

3. Press c or d to highlight ADD/ ERASE.

4. Press

a or b to select ADD or

ERASE, whichever function you

a or b to

PICTURE AUDIO SETUP OPTION

TV / CABLE CABLE

CH PROGRAM START

ADD / ERASE ADD ERASE

want to perform.

5. Repeat steps 1–4 for other

SELECT ADJUST

channels you want to add or erase.

Changing channels

Channel Numbers

Channel +/–

c d a b

Welcome to

Toshiba

Connecting

your TV

Remote Control

Using the

Setting up

your TV

Using the TV’s

Features

To change to the next programmed channel:

Press CHANNEL c/d on the TV front panel or CH +/– on the remote control.

To change to a specific channel (programmed or unprogrammed):

Press the Channel Number buttons (0–9 and 100) on the remote control. For example, to select channel 125, press 100, 2, 5.

J3S00121A(E)_P07-13 13/01/2005, 5:41 PM13

Appendix

Page 14

Using the TV’s features

Adjusting the channel settings

Switching between two channels

You can switch between two channels without entering an actual channel number each time.

To switch between two channels:

1. Select the first channel you want to view.

2. Select a second channel using the Channel Number buttons (0–9,

100).

3. Press CH RTN. The previous channel will be displayed. Each time you press CH RTN, the TV will switch back and forth between the two channels.

Programming your favorite channels

You can preset up to 12 of your favorite channels using the Favorite Channel Programming feature. Because this feature scans through only your favorite channels, it allows you to skip other channels you do not normally watch. You can still use Channel + / – to scan through all the channels you programmed in the TV’s memory.

To program your favorite channels:

1. Select a channel you want to program as a favorite channel.

2. Press MENU, then press a or b to display the OPTION menu.

3. Press c or d to highlight FAVORITE CH.

Channel Numbers

CH RTN

Features

Using the TV’s

PICTURE AUDI O SETUPCHOPTION

CH LABEL START

FAVORITE CH

V-CHIP LOCK ON/OFF TIMER COLORSTREAM

SELECT START

ENGLISHLANGUAGE

START START START OFF DVD

4. Press a or b to display the FAVORITE CH menu. SET/CLEAR will be highlighted.

PICTURE AUDI O SETUPCHOPTION

FAVORITE CH : CH 012

SET/CLEAR SET CLEAR

SET UP CH

TV CABLE SELECT END EXIT

0000 0000 0000

SET ENTER

5. Press a or b to highlight SET and press ENTER.

6. Press EXIT to close the screen.

7. Repeat steps 1–6 for up to 11 other channels.

To select your favorite channels:

Press the FAV ▲▼ buttons on the remote control to select your favorite channels. The FAV ▲▼ buttons will not work until you have programmed your favorite channels.

16:9

Channel Numbers

c d a b

Exit Menu/

Enter

FAV

J3S00121A(E)_P14-25 13/01/2005, 5:41 PM14

Page 15

To clear your favorite channels:

1. Select a channel you want to clear.

2. Press MENU, then press a or b to display the OPTION menu.

3. Press c or d to highlight FAVORITE CH.

4. Press a or b to display the FAVORITE CH menu. SET/CLEAR will be highlighted.

PICTURE AUDI O SETUPCHOPTION

FAVORITE CH : CH 012

SET/CLEAR SET CLEAR

SET UP CH

TV CABLE SELECT END EXIT

736 4 1 12 125 63 40 13 28 97 112

SET ENTER

Channel Numbers

c d a b

Safeguards

Important

Welcome to

Toshiba

5. Press a or b to highlight CLEAR.

PICTURE AUDI O SETUPCHOPTION

FAVORITE CH : CH 012

SET/CLEAR SET CLEAR

SET UP CH

TV CABLE SELECT END EXIT

736 4 1 12 125 63 40 13 28 97 112

CLEAR ENTER

6. Press ENTER until “0” replaces the channel number you want to erase.

7. Press EXIT to clear the screen.

8. Repeat steps 1–6 for the other channels.

Using the V-Chip (parental control) feature

The V-Chip feature is available only for the U.S. V-Chip system. The Canadian V-Chip system is not supported.

You can prevent others from viewing certain programs or channels by blocking them using the V-Chip feature.

Selecting a PIN code

Before you can block programs and channels, you must select a personal identification number (PIN) code. The PIN code you select prevents others from changing the rating limits you set.

To select your PIN code and access the V-Chip menus:

1. Press MENU, then press a or b to highlight the OPTION menu.

2. Press c or d to highlight V-CHIP.

Exit Menu/

Enter

Connecting

your TV

Remote Control

Using the

Setting up

your TV

PICTURE AUDI O SETUPCHOPTION

CH LABEL START FAVORITE CH

V-CHIP

LOCK ON/OFF TIMER COLORSTREAM SELECT START

ENGLISHLANGUAGE

START START START OFF DVD

Note:

The PIN code you programmed is also used in the LOCK menu; see pages 19 and 20.

J3S00121A(E)_P14-25 13/01/2005, 5:41 PM15

c d a b

Using the TV’s

Features

Appendix

Page 16

3. Press a or b to display the V-CHIP menu.

PICTURE AUDI O SETUPCHOPTION

V-CHIP BLOCKING RESET

PIN CODE

SELECT END EXIT

SET ENTER

[0-9]

4. Use the Channel Number buttons (0–9) to enter your PIN code. If you are accessing the V-Chip menus for the first time, select a four-digit number to be your PIN code. Press ENTER. The BLOCKING menu appears.

PICTURE AUDIO SETUPCHOPTION

V-CHIP

ENABLE BLOCKING ON OFF

SET RATING

BLOCKING OPTION

NEW PIN CODE

START START START

ADJUSTSELECT

5. You may now enable blocking. See “Blocking programs by ratings” (below), “Locking channels” (page 19), “To change your PIN code” (below), or “Blocking unrated movies or programs” (page 19).

Note:

If you forget your PIN code, press RECALL four times within five seconds from the V-CHIP menu. This allows you to proceed to the BLOCKING menu and resets your PIN code.

Features

Using the TV’s

To change your PIN code:

1. Press MENU, then press a or b to display the OPTION menu.

2. Press c or d to highlight V-CHIP.

3. Press a or b to display the V-CHIP menu.

4. Use the Channel Number buttons (0–9) to enter your PIN code. Press ENTER. The BLOCKING menu appears.

5. Press c or d to highlight NEW PIN CODE and press a or b to display the NEW PIN CODE menu.

6. Use the Channel Number buttons (0–9) to enter a new code. Press ENTER.

7. Press EXIT to return to normal viewing.

Blocking programs by ratings

The Motion Picture Association of America (MPAA) uses a rating system to qualify motion picture content. Television broadcasters employ a rating system to qualify the content of television programs, as well. The MPAA, Youth TV, and TV ratings work with the V-Chip feature and allow you to block programs according to the rating limits you set.

Channel Numbers

Recall

c d a b

Exit Menu/

Enter

J3S00121A(E)_P14-25 13/01/2005, 5:41 PM16

Page 17

MPAA Ratings

X For adults only. NC17 Not intended for anyone 17 or under. R Restricted. Under 17 requires an accompanying

parent or adult guardian.

PG13 Parents strongly cautioned. Some material may be

inappropriate for children under 13.

PG Parental guidance suggested. Some material may

not be appropriate for children.

G General audience. Appropriate for all ages.

Youth TV Ratings

Y7FV, Y7 Directed to older children. This program is designed

for children age 7 and above. Programs in which fantasy violence may be more intense or combative than other programs in this category are designated TV-Y7-FV.

Y All children. This program is designed to be appropri-

ate for all children.

Safeguards

Important

Welcome to

Toshiba

Connecting

your TV

TV Ratings

MA Mature audience only. This program is specifically

designed to be viewed by adults and therefore may be unsuitable for children under 17.

Language Crude or indecent language. Sex Explicit sexual activity. Violence Graphic violence.

14 Parents strongly cautioned. This program contains

some material that many parents would find unsuitable for children under 14 years of age.

Dialog Intensely suggestive dialog. Language Strong, coarse language. Sex Intense sexual situations. Violence Intense violence.

PG Parental guidance suggested. This program contains

material that parents may find unsuitable for younger children. Dialog Some suggestive dialog. Language Infrequent coarse language. Sex Some sexual situations. Violence Moderate violence.

G General audience. Most parents would find this

program suitable for all ages.

Note:

To see the rating of the program you are viewing, press RECALL at any time.

Remote Control

Using the

Setting up

your TV

Using the TV’s

Features

No DLSV Programs not rated according to Dialog, Language,

Sex or Violence.

J3S00121A(E)_P14-25 13/01/2005, 5:42 PM17

Appendix

Page 18

To use the V-Chip to block programs by rating:

1. Press MENU, then press a or b to display the OPTION menu.

2. Press c or d to highlight V-CHIP.

3. Press a or b to display the V-CHIP menu.

PICTURE AUDI O SETUPCHOPTION

V-CHIP

ENABLE BLOCKING ON OFF

SET RATING BLOCKING OPTION NEW PIN CODE

START START START

ADJUSTSELECT

5. Press c or d to highlight ENABLE BLOCKING.

• Press a or b to highlight ON to enable V-Chip program blocking

by rating.

• Press a or b to highlight OFF to disable V-Chip program blocking

by rating.

6. Press c or d to highlight SET RATING. Then, press a or b to display the SET RATING menu.

Channel Numbers

c d a b

Exit

Menu/ Enter

Features

Using the TV’s

PICTURE AUDI O SETUPCHOPTION

SET RATING

MPAA

RATING

YOUTH TV

RATING

SELECT

NC17 R

Y7FV Y7 Y

ADJUST

PG13

PG G

PICTURE AUDI O SETUPCHOPTION

TV RATING

DIALOG

LANGUAGE SEX VIOLENCE NO DLSV V-CHIP MENU

SELECT

MA 14 PG G

START

ADJUST

7. Press c or d to highlight MPAA Rating, Youth TV Rating or individual TV Ratings.

8. Press a or b to select the ratings that will be blocked. Blocked ratings are signified by a red “X.” Unblocked ratings are signified by a green “

✓.” As you block ratings, all ratings higher than the

ones you select are blocked, as well. For example, if you choose to block the MPAA rating R, the higher ratings NC17 and X are automatically blocked too.

9. When you are done selecting the ratings to be blocked, press EXIT to return to normal viewing.

When you try to view a program with a ratings block, a message will appear listing the program’s ratings. The program can still be viewed if you press MUTE and then enter your PIN code to temporarily bypass the block.

Note:

Not all programs are rated. To block programs or movies that are unrated, see “Blocking unrated movies or programs,” page 19.

J3S00121A(E)_P14-25 13/01/2005, 5:42 PM18

Page 19

Blocking unrated movies or programs

Some movies and programs are not rated. You can block these movies and programs using the V-Chip.

To block unrated movies or programs:

1. Press MENU, then press a or b to display the OPTION menu.

2. Press c or d to highlight V-CHIP.

3. Press a or b to display the V-CHIP menu.

5. Press c or d

6. Press a or b to display the BLOCKING OPTION menu.

7. Press c or d to highlight MPAA UNRATED.

• Press a or b to highlight ON to block unrated movies.

• Press a or b to highlight OFF to unblock unrated movies.

8. Press c or d to highlight TV NONE RATING.

• Press a or b to highlight ON to block programs with a rating of

“TV NONE.” When you select ON, the message “NOTICE: ENABLING THIS OPTION MAY BLOCK EMERGENCY MESSAGES” appears.

• Press a or bto highlight OFF to unblock programs with a rating

of “TV NONE.”

9. Press EXIT to return to normal viewing.

highlight BLOCKING OPTION.

Note:

Blocking television programs with a rating of “TV NONE” may block emergency messages.

Safeguards

Important

Welcome to

Toshiba

Connecting

your TV

Using the LOCK menu

The LOCK menu includes the CH LOCK, VIDEO LOCK, GAME TIMER, and NEW PIN CODE functions. You can use these functions after entering the correct PIN code. (This PIN code is the same one selected under “Selecting a PIN code” on page 15.)

Locking channels

With the CH LOCK feature, you can lock specific channels. You will not be able to tune locked channels unless you clear the setting. You can choose to lock up to nine TV channels and nine cable channels.

To lock channels:

1. Use the Channel Number buttons (0–9) to display the television channel you wish to lock.

2. Press MENU, then press a or b to display the OPTION menu.

3. Press c or d to highlight LOCK.

4. Press a or b to display the LOCK menu.

5. Use the Channel Number buttons (0–9) to enter your PIN code, then press ENTER. The LOCK menu appears.

6. Press c or d to highlight CH LOCK and press a or b to display the CH LOCK menu.

7. Press a or b to select the following:

• SET– to set the channel as one to be

locked. Then press ENTER.

• CLEAR– to clear all channels from

the list of locked channels. Then press ENTER.

8. Repeat steps 1 through 7 to lock other channels. When you are finished locking channels, press EXIT to return to normal viewing. If you try to tune a locked channel, the TV will not display it, but will display the nearest unlocked channel.

PICTURE AUDIO SETUPCHOPTION

LOCK

CH LOCK START

VIDEO LOCK

GAME TIMER NEW PIN CODE SELECT ADJUST

PICTURE AUDIO SETUPCHOPTION

CH LOCK : CH 12

SET/CLEAR SET CLEAR

LOCKED CH

TV CABLE SELECT END EXIT

OFF

OFF START

000 000 000

SET ENTER

Channel Numbers

c d a b

Exit Menu/

Enter

Note:

After programming CH LOCK, change channels before turning off the television.

Remote Control

Using the

Setting up

your TV

Using the TV’s

Features

Appendix

J3S00121A(E)_P14-25 13/01/2005, 5:42 PM19

Page 20

Features

Using the TV’s

To unlock channels:

1. Press MENU, then press a or b to display the OPTION menu.

2. Press c or d to highlight LOCK and then press a or b to display the LOCK menu.

3. Use the Channel Number buttons (0–9) to enter your PIN code, then press ENTER. The LOCK menu appears.

4. Press c or d to highlight CH LOCK and press a or b to display the CH LOCK menu.

5. Press a or b to highlight CLEAR, and then press ENTER. This clears all channels from the list of locked channels.

6. Press EXIT to return to normal viewing.

Locking video input

With the VIDEO LOCK feature, you can lock out the input sources (VIDEO1, VIDEO2, COLORSTREAM) and channels 3 and 4. You will not be able to select the input sources with the TV/VIDEO button or Channel buttons unless you clear the setting.

To set up the video lock:

1. Press MENU, then press a or b to display the OPTION menu.

2. Press c or d to highlight LOCK.

3. Press a or b to display the LOCK menu.

4. Use the Channel Number buttons (0–9) to enter your PIN code, then press ENTER. The LOCK menu appears.

5. Press c or d to highlight VIDEO LOCK.

6. Press a or b to select:

• OFF: Unlocks all video input

sources. VIDEO: Locks VIDEO1, VIDEO2

•

and COLORSTREAM.

• VIDEO +: Locks VIDEO1, VIDEO2,

COLORSTREAM, channel 3 and channel 4. This option should be used if you use the antenna terminal to play a video tape.

7. Press EXIT to return to normal viewing.

Setting the GameTimer

With the GameTimerTM feature, you can automatically activate the VIDEO LOCK feature (VIDEO setting)

to set a time limit for playing a

TV game (30, 60, 90 or 120 minutes).

To set up the GameTimer:

1. Press MENU, then press a or b to display the OPTION menu.

2. Press c or d to highlight LOCK.

3. Press a or b to display the LOCK menu.

4. Use the Channel Number buttons (0–9) to enter your PIN code, then press ENTER. The LOCK menu appears.

5. Press c or d to highlight GameTimer.

6. Press a or b to select a time limit (30 minutes, 60 minutes, 90 minutes, 120 minutes or OFF).

7. Press EXIT to return to normal viewing. After the GameTimer is programmed, the display will appear briefly every ten minutes to remind you that the GameTimer is operating. When the programmed time is reached, the display will change the channel automatically.

PICTURE AUDIO SETUPCHOPTION

LOCK

CH LOCK START

VIDEO LOCK

GAME TIMER NEW PIN CODE SELECT ADJUST

PICTURE AUDIO SETUPCHOPTION

LOCK

CH LOCK START VIDEO LOCK

GAME TIMER

NEW PIN CODE SELECT ADJUST

OFF VIDEO VIDEO+ OFF START

OFF

OFF 30 60 90 120 START

Channel Numbers

c d a b

Exit Menu/

Enter

Note:

After programming VIDEO LOCK, change channels or activate the TV/VIDEO key before turning off the television.

Channel Numbers

c d a b

Exit Menu/

Enter

J3S00121A(E)_P14-25 13/01/2005, 5:42 PM20

Page 21

Labeling channels

Channel labels appear over the channel number display each time you turn on the TV, select a channel, or press the Recall button. You can choose any four characters to identify a channel.

To create channel labels:

1. Select a channel you want to label.

2. Press MENU, then press a or b until the OPTION menu appears.

3. Press c or d

to highlight CH LABEL.

Channel Numbers

Safeguards

Important

Welcome to

Toshiba

PICTURE AUDI O SETUPCHOPTION

CH LABEL START

FAVORITE CH V-CHIP LOCK ON/OFF TIMER COLORSTREAM

SELECT START

ENGLISHLANGUAGE

START START START OFF DVD

4. Press a or b to display the CH LABEL menu. SET/CLEAR will be highlighted.

PICTURE AUDI O SETUPCHOPTION

CH LABEL : CH 12

SET/CLEAR SET CLEAR

LABEL

SELECT END EXIT

SET ENTER

5. Press a or b to highlight SET.

6. Press c or d

PICTURE AUDI O SETUPCHOPTION

CH LABEL : CH 12 SET/CLEAR SET

LABEL

to highlight LABEL.

c d a b

Exit Menu/

Enter

Connecting

your TV

Remote Control

Using the

SELECT END EXIT

SET ENTER

7. Press a or b to enter a character in the first space. Press the button repeatedly until the character you want appears on the screen. Press ENTER.

8. Repeat step 7 to enter the rest of the characters. If you would like a blank space in the label name, you must choose a blank

PICTURE AUDIO SETUPCHOPTION

CH LABEL : CH 12 SET/CLEAR SET

LABEL

SELECT END EXIT

SET ENTER

space from the list of characters; otherwise, a dash will appear in that space.

9. Repeat steps 1–8 for other channels. You can assign a label to each channel.

10. Press EXIT to clear the screen.

To erase channel labels:

1. Select a channel with a label.

2. Press MENU, then press a or b until the OPTION menu appears.

3. Press c or d to highlight CH LABEL.

4. Press a or b to display the CH LABEL menu. SET/CLEAR will be highlighted.

5. Press a or b to highlight CLEAR.

6. Press ENTER.

7. Repeat steps 1–6 to erase other channel labels.

Note:

The character will change as below.

– 09

• • •

SPACE

–

• • •

Setting up

your TV

Using the TV’s

Features

Appendix

J3S00121A(E)_P14-25 13/01/2005, 5:42 PM21

Page 22

Setting the clock

You must set the clock before you can program the ON/OFF timer.

To set the clock: (Example: 8:30 AM)

1. Press MENU, then press a or b to display the OPTION menu.

2. Press c or d

to highlight ON/OFF TIMER.

PICTURE AUDIO SETUPCHOPTION

CH LABEL START FAVORITE CH V-CHIP LOCK

ON/OFF TIMER

COLORSTREAM SELECT ADJUST SET ENTER

ENGLISHLANGUAGE

START START START ON OFF SET DVD

3. Press a or b to highlight SET, then press ENTER. The ON/OFF TIMER menu appears.

4. Press c or d to highlight CLOCK, then press a or b to highlight the hour position.

PICTURE AUDIO SETUPCHOPTION

ON/OFF TIMER

CLOCK 12:00 AM

ON TIMER

12:00 AM CH 001

OFF TIMER

12:00 AM

SELECT END EXIT

CLEAR

ADJUST

5. Press c or d to set the hour, then press b to highlight the minute position.

PICTURE AUDIO SETUPCHOPTION

ON/OFF TIMER

CLOCK 8:30 AM

ON TIMER

12:00 AM CH 001

OFF TIMER

12:00 AM

SELECT END EXIT

CLEAR

ADJUST

c d a b

Exit Menu/

Enter

Note:

If the power source for the TV is interrupted (for example, the power cord is unplugged or a power failure occurs), you will need to reset the clock.

Features

Using the TV’s

6. Press c or d to set the minutes, then press EXIT to return to normal viewing.

Setting the ON/OFF timer

Setting the on timer

This feature allows you to program the TV to turn on automatically at a set time. If you program the ON TIMER to “DAILY,” the TV will turn on every day at the same time to the same channel until you clear the ON TIMER.

To set the on timer: (Example: Turning on the TV to channel 12 at 7:00 AM, DAILY)

1. Press MENU, then press a or b to display the OPTION menu.

2. Press c or d to highlight ON/OFF TIMER.

3. Press a or b to highlight SET, then press ENTER. The ON/OFF TIMER menu appears.

4. Press c or d to highlight ON TIMER and press a or b to highlight the hour position.

PICTURE AUDIO SETUPCHOPTION

ON/OFF TIMER CLOCK 12:00 AM

ON TIMER

12:00 AM CH 001

OFF TIMER

12:00 AM

SELECT END EXIT

CLEAR

ADJUST

c d a b

Menu/ Enter

Note:

After a power failure or disconnection of the power, the timer settings will be lost.

J3S00121A(E)_P14-25 13/01/2005, 5:42 PM22

Page 23

5.Press c or d to set the desired hour, then press b.

PICTURE AUDIO SETUPCHOPTION

ON/OFF TIMER CLOCK 12:00 AM

ON TIMER

7:00 AM CH 001

OFF TIMER

12:00 AM

SELECT END EXIT

CLEAR

ADJUST

6.Set the desired minutes and channel, as in step 5.

7.Press a or b to select ONCE or DAILY timer date.

Safeguards

Important

Welcome to

Toshiba

PICTURE AUDIOCHOPTIONSETUP

ON/OFF TIMER CLOCK 12:00 AM

ON TIMER

7:00 AM CH 012

OFF TIMER

12:00 AM

SELECT END EXIT

CLEARONCE DAILY

CLEAR

SET ENTER

8.Press EXIT to return to normal viewing.

To cancel the on timer:

Select CLEAR in step 7 above. Press EXIT to return to normal viewing.

Setting the off timer

This feature allows you to program the TV to turn off automatically at a set time. If you program the OFF TIMER to “DAILY,” the TV will automatically turn off every day at the same time.

To set the off timer: (Example: Turning off the TV at 11:30 PM)

1. Press MENU, then press a or b to display the OPTION menu.

2. Press c or d

3. Press a or b to highlight SET, then press ENTER. The ON/OFF TIMER menu appears.

4. Press c or d to highlight OFF TIMER, then press a or b to highlight the hour position.

PICTURE AUDIO SETUPCHOPTION

ON/OFF TIMER CLOCK 12:00 AM ON TIMER

7:00 AM CH 012

OFF TIMER

12:00 AM

SELECT END EXIT

5. Press c or d to set the desired hour, then press b.

to highlight ON/OFF TIMER.

DAILY

CLEAR

ADJUST

c d a b

Exit

Note:

The ON TIMER has a one-hour automatic shut off. One hour after the ON TIMER has turned on the TV, the TV will turn off automatically unless you press any button .

c d a b

Connecting

your TV

Remote Control

Using the

Setting up

your TV

PICTURE AUDIO SETUPCHOPTION

ON/OFF TIMER CLOCK 12:00 AM ON TIMER

7:00 AM CH 012

OFF TIMER

11:00 PM

SELECT END EXIT

DAILY

CLEAR

ADJUST

6. Set the desired minutes, as in step 5.

7. Press a or b to select ONCE or DAILY.

PICTURE AUDIO SETUPCHOPTION

ON/OFF TIMER CLOCK 12:00 AM ON TIMER

7:00 AM CH 012

OFF TIMER

11:30 PM

SELECT END EXIT

DAILY

ONCE DAILY SET ENTER

8. Press EXIT to return to normal viewing.

To cancel the off timer:

Select CLEAR in step 7 above. Press EXIT to return to normal viewing.

J3S00121A(E)_P14-25 13/01/2005, 5:42 PM23

CLEAR

Exit Menu/

Enter

Using the TV’s

Features

Appendix

Page 24

Adjusting the picture quality

TV VIDEO 1

COLOR

STREAM

VIDEO 2

You can adjust the picture quality to your personal preferences, including the contrast, brightness, color, tint, and sharpness. The qualities you choose will be stored automatically in your TV’s memory so you can recall them at any time.

To adjust the picture quality:

1. Press MENU, then press a or b to display the PICTURE menu.

PICTURE AUDI O SETUPCHOPTION

CONTRAST BRIGHTNESS COLOR 32 TINT SHARPNESS

SELECT ADJUST

2. Press c or d until the item you want to adjust is highlighted.

3. Press a or b to adjust the level.

Selection a Pressing b

contrast lower higher brightness darker lighter color paler deeper tint reddish greenish sharpness softer sharper

4. Press EXIT to return to normal viewing.

64 32

c d a b

Exit

Reset

Note:

To reset the picture adjustments to the factory settings, press RESET.

Features

Using the TV’s

Watching video input

You can use the TV/VIDEO button on the remote control to view a signal coming from other devices, such as VCRs or video disc players that may be connected to your TV. (See “Connecting your TV” on page 7.)

Specifying the ColorStream® setting

You can use the ColorStream (component video) input for connecting either a DVD player or a DTV receiver.

Note:

This TV is not HD ready.

1. Press TV/VIDEO to put the TV in ColorStream mode.

2. Press MENU, then press a or b until the OPTION menu appears.

3. Press c or d to highlight COLORSTREAM.

4. Press a or b to highlight DVD or

PICTURE AUDIO SETUPCHOPTION

CH LABEL START FAVORITE CH V-CHIP LOCK ON/OFF TIMER

COLORSTREAM

SELECT ADJUST

ENGLISHLANGUAGE

START START START OFF DVD D TV

DTV, depending on which device is connected.

5. Press EXIT to return to normal viewing.

Note:

The factory setting is DVD.

Displaying on-screen information

Press RECALL to display the following on-screen information:

• Clock

• Channel number or VIDEO mode

selected

• Channel label (if preset)

• Stereo or SAP (second audio program) audio status

• Content rating

12:00 AM STEREO SAP

(TV)

CABLE 007

ABCD

MPAA

To select the input mode:

Press the TV/VIDEO button repeatedly to select the desired mode. The signal source you are connected to is displayed in light blue.

Recall

c d a b

Exit

TV/Video

J3S00121A(E)_P14-25 13/01/2005, 5:42 PM24

Page 25

16:9

Setting the sleep timer

You can set the TV so it turns off automatically.

To set the sleep timer:

Repeatedly press SLEEP on the remote control to set the length of time until the TV turns off. The clock will count down 10 minutes for each press of the SLEEP button (120, 110, ...10, 0). After the sleep time is programmed, the display will appear briefly every ten minutes to remind you that the sleep timer is operating.

To confirm the sleep timer setting:

Press SLEEP one time. The remaining time will be momentarily displayed.

To cancel the sleep timer:

Repeatedly press SLEEP until the display turns to 0.

Using the closed caption feature

The closed caption feature has two options: captions or text. A caption is a printed version of the dialogue, narration and/or sound effects of a program. Text is information not related to the program that appears on half of the TV screen when available.

To view captions or text:

1. Select the desired program. Closed captioned programs are usually marked in your local TV listing as “CC.”

2. Press CAP/TEXT repeatedly to select caption or text mode.

Sleep

1/2

CAP/TEXT

16:9

Safeguards

Important

Welcome to

Toshiba

Connecting

your TV

CAPTION CH1 TEXT CH1

3. Press 1/2 to select the caption or text channel.

CAPTION CH2

4. To turn off the closed caption feature, press CAP/TEXT repeatedly until captions or text no longer display on-screen.

TEXT CH2

Changing the picture size

You can change the picture size to 16:9 (widescreen) style.

To view 16:9 style:

Select the desired program, then press 16:9. The picture size will be displayed 16:9 style. “16:9” will appear on the screen for approx. 4 seconds.

To cancel 16:9 style:

Press 16:9 again. The picture size will return to 4:3 style.

16:9

Note:

A closed caption signal may not be decoded in the following situations:

• When a video tape has been dubbed.

• When the signal reception is weak.

• When the signal reception is non-standard.

When you select the text mode, the text screen always appears as a black box. When there is no signal, however, the text screen will not display text characters. Repeatedly press CAP/TEXT until the box disappears.

NOTICE OF POSSIBLE ADVERSE EFFECTS ON TV PICTURE TUBE

Avoid displaying stationary images on your TV screen for extended periods of time. Fixed (non-moving) images (such as black/ gray bars in wide-screen picture formats, video game patterns, TV station logos, closed captions) can become permanently ingrained in the picture tube. This type of

damage is NOT COVERED BY YOUR WARRANTY.

Remote Control

Using the

Setting up

your TV

Using the TV’s

Features

4:3 Normal

J3S00121A(E)_P14-25 13/01/2005, 5:42 PM25

16:9 Widescreen

Appendix

Page 26

Adjusting the sound

Muting the sound

Press MUTE to temporarily turn off the sound. While the sound is off, the screen will display the word MUTE in the lower right-hand corner. To restore the sound, press MUTE again.

Selecting stereo/SAP broadcasts

You can listen to high-fidelity stereo sound with the Multi-channel TV Sound (MTS) feature. MTS can also transmit a second audio program (SAP) containing a second language or other audio information.

When the TV receives a stereo or SAP broadcast, the word STEREO or SAP appears on-screen every time the TV is turned on, the channel is changed, or the RECALL button is pressed. The MTS feature is not available in the VIDEO mode.

You can leave your TV in STEREO mode because it will automatically output stereo or monaural sound, depending on the broadcast type. If the stereo sound is noisy, select MONO to reduce the noise. The word STEREO or SAP is displayed in light blue when the TV receives the signal.

To select the desired MTS setting:

Repeatedly press the MTS button to select either STEREO, SAP, MONO+SAP, or MONO. If the current program is not available in stereo or SAP, the setting will not be available when you press the MTS button.

Recall

Mute

MTS

Features

Using the TV’s

STEREO

MONO

If the current program is not broadcasting either stereo or SAP, those settings will not be available when you press the MTS button.

SAP

MONO + SAP

J3S00121A(E)_P26-BACK 13/01/2005, 5:42 PM26

Page 27

Adjusting the sound quality

You can change the sound quality of your TV by adjusting the bass, treble, and balance.

To adjust the sound quality:

1. Press MENU, then press a or b until the AUDIO menu appears.

Safeguards

Important

PICTURE AUDIO SETUPCHOPTION

BASS TREBLE BALANCE SURROUND STABLE SOUND

SELECT ADJUST

OFF OFF

32 32

2. Press c or d to highlight the item you want to adjust.

3. Press a or b to adjust the level.

PICTURE AUDIO SETUPCHOPTION

BASS

TREBLE BALANCE SURROUND STABLE SOUND

SELECT ADJUST

OFF OFF

32 32

• a makes the sound quality weaker or decreases the balance in

the right channel, depending on the item selected.

• b makes the sound quality stronger or decreases the balance in

the left channel, depending on the item selected.

c d a b

Reset

Note:

To reset the audio adjustments to the factory settings, press RESET.

Welcome to

Toshiba

Connecting

your TV

Remote Control

Using the

Using the surround sound feature

The surround sound feature expands the audio listening field wider and deeper to create exceptional sound quality from the TV’s speakers. The feature uses stereo signals from a TV broadcast or video input.

To turn on the surround sound feature:

1. Select the STEREO mode, if available (see “Selecting stereo/SAP broadcasts” on page 26.)

2. Press MENU, and then press a or b until the AUDIO menu appears.

3. Press c or d to highlight SURROUND.

4. Press a or b to highlight ON.

PICTURE AUDIO SETUPCHOPTION

BASS TREBLE BALANCE

SURROUND

STABLE SOUND

SELECT ADJUST

ON OFF

To turn off the surround sound feature:

Highlight OFF in step 4 above.

In general, you can leave your TV in surround mode because it will automatically output the type of sound being broadcast (surround stereo or monaural).

OFF

32 32

c d a b

Setting up

your TV

Using the TV’s

Features

Appendix

J3S00121A(E)_P26-BACK 13/01/2005, 5:42 PM27

Page 28

Using the StableSound® feature

The StableSound feature limits the highest volume level to prevent extreme changes in volume when the signal source is changed.

To turn on the StableSound

feature:

1. Press MENU, then press a or b until the AUDIO menu appears.

2. Press c or d to highlight STABLE SOUND.

3. Press a or b to highlight ON.

PICTURE AUDIO SETUPCHOPTION

BASS TREBLE BALANCE SURROUND

STABLE SOUND

SELECT ADJUST

OFF ON OFF

To turn off the StableSound

32 32

feature:

c d a b

Highlight OFF in step 3 above.

Auto power off

The TV will automatically turn off after approximately 15 minutes if it is tuned to a vacant channel or a station that completes broadcast for the day and stops broadcasting on that channel. This feature does not work in VIDEO mode.

its

Understanding the Power Return feature

If the power is cut off while you are viewing the TV and the power is resupplied, the Power Return feature will turn the TV on automatically.

If the power is going to be off for a long time or you are going to be away from home for a long time, unplug the power cord from the wall outlet to prevent the TV from turning on in your absence.

Features

Using the TV’s

J3S00121A(E)_P26-BACK 13/01/2005, 5:42 PM28

Page 29

Appendix

Troubleshooting

Before calling a service technician, please check the following table for a possible cause of the problem and some solutions.

Problem Solution

TV will not turn on • Make sure the power cord is plugged in, then press POWER.

• The remote control batteries may be dead. Replace the batteries.

No picture, no sound • Check the antenna/cable connections.

• This TV will not accept or display 480p or 720p progressive scan

signals or 1080i interlaced high-definition signals through its ColorStream inputs. Switch the other device’s output to 480i interlaced mode first (see page 9).

No sound, picture OK • The sound may be muted. Press VOLUME.

• The station may have broadcast difficulties. Try another

• The MTS feature may be in SAP mode. Press the MTS button on the remote control until STEREO (or MONO) mode is active.

Poor sound, picture OK • The station may have broadcast difficulties. Try another channel.

• The MTS feature may be in SAP mode. Press the MTS button on the remote control until STEREO (or MONO) mode is active.

Poor picture, sound OK • Check the antenna connections.

• The station may have broadcast difficulties. Try another channel.

• Adjust the PICTURE menu.

• This TV will not accept or display 480p or 720p progressive scan

signals or 1080i interlaced high-definition signals through its ColorStream inputs. Switch the other device’s output to 480i interlaced mode first (see page 9).

Poor reception of broadcast channels • The station may have broadcast difficulties. Try another channel.

• Check the antenna connections.

• If you are using a VCR, make sure the TV/VCR button is set correctly.

Cannot receive above channel 13 •

Unable to select a certain channel • The channel may be blocked by the V-Chip feature or CH LOCK

Cannot access signal input sources • Check the VIDEO LOCK feature. (Video1,Video2 and ColorStream) and/or Channels 3 and 4

Multiple images • The station may have broadcast difficulties. Try another channel.

Poor color or no color • The station may have broadcast difficulties. Try another channel.

Black box on screen • Repeatedly press CAP/TEXT to turn off the Closed Caption Text mode.

No stereo or SAP sound from a • Make sure the MTS feature is set properly. known MTS broadcast

The V-Chip PIN code does not work • Change or reset your PIN code (pages 15 and 16). (U.S. V-Chip system only)

The remote control does not operate • Remove all obstructions between the remote control and the TV.

Make sure the TV/CABLE feature in the SETUP menu is set to “CABLE”.

feature, or erased with the add/erase feature.

• Use a highly directional outdoor antenna.

• Adjust the TINT and/or COLOR in the PICTURE menu.

• If you change the direction of the TV while it is turned on, the picture

could suffer from color shading. If so, turn off the TV and allow it to cool for several hours before turning it on again.

• The remote control batteries may be dead. Replace the batteries.

channel.

Safeguards

Important

Welcome to

Toshiba

Connecting

your TV

Remote Control

Using the

Setting up

your TV

Using the TV’s

Features

Appendix

J3S00121A(E)_P26-BACK 13/01/2005, 5:42 PM29

Page 30

Specifications

• This model complies with the specifications below.

• Design and specifications are subject to change without notice.

• This model may not be compatible with features and/or specifications that may be added in the future.

14AF45 20AF45

Picture Tube 14 in. (357 mm) diagonal 20 in. (508 mm) diagonal

(Screen size is approximate.) (Screen size is approximate.)

Television system NTSC standard

Channel coverage VHF: 2–13

UHF: 14–69

Cable TV: 4A, A-5–A-1, A-I,

J–W, W+1–W+84

Power source 120V AC, 60 Hz

Power consumption 80 W 105 W

Audio power 2.5 W + 2.5 W

Speaker type 1-5/8 in. x 2-13/16 in. x 2 pcs. 2 in. x 4-11/16 in. x 2 pcs.

Video/Audio terminals S-VIDEO INPUT

Y-INPUT: 1V (p-p), 75 ohm, negative sync.

C-INPUT: 0.286V (p-p) (burst signal), 75 ohm

VIDEO/AUDIO INPUT

VIDEO: 1V (p-p), 75 ohm, negative sync.

AUDIO: 150 mV (rms) (30% modulation equivalent, 47k ohm)

ColorStream

Y : 1V (p-p), 75 ohm

PR : 0.7V (p-p), 75 ohm

PB : 0.7V (p-p), 75 ohm

Dimensions Width: 17 in. (432 mm) 23-1/4 in. (590 mm)

Height: 13-9/16 in. (344.5 mm) 17-9/16 in. (446.5 mm)

Depth: 15-3/16 in. (386 mm) 19-1/16 in. (484 mm)

Weight 24.3 lbs. (11 kg) 50.6 Ibs. (23 kg)

Supplied accessories Remote control with two size “AAA” batteries

(component video) INPUT

Appendix

J3S00121A(E)_P26-BACK 13/01/2005, 5:42 PM30

Page 31

Limited United States Warranty

For 24'' FST PURE® and All Smaller Television Models

Safeguards

Important

Toshiba America Consumer Products, L.L.C. (“TACP”) makes the following limited warranties to LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE. PRODUCTS PURCHASED IN THE U.S.A. AND USED ANYWHERE OUTSIDE OF THE U.S.A., INCLUDING, WITHOUT LIMITATION, CANADA AND MEXICO, ARE NOT COVERED BY THESE WARRANTIES. PRODUCTS PURCHASED ANYWHERE OUTSIDE OF THE U.S.A., INCLUDING, WITHOUT LIMITATION, CANADA AND MEXICO, AND USED IN THE U.S.A., ARE NOT COVERED BY THESE WARRANTIES.

Limited Ninety (90) Day Warranty on Labor*

TACP warrants this television and its parts against defects in materials or workmanship for a period of ninety (90) days after the date of original retail purchase. DURING THIS PERIOD, TACP WILL, AT TACP’S OPTION, REPAIR OR REPLACE A DEFECTIVE PART WITH A NEW OR REFURBISHED PART WITHOUT CHARGE TO YOU FOR PARTS OR LABOR. YOU MUST DELIVER THE ENTIRE TELEVISION TO AN AUTHORIZED TACP SERVICE STATION. YOU MUST PAY FOR ALL TRANSPORTATION AND INSURANCE CHARGES FOR THE TELEVISION TO AND FROM THE SERVICE STATION.

Limited One (1) Year Warranty on Parts*

TACP further warrants the parts in this television against defects in materials or workmanship for a period of one (1) year after the date of original retail purchase. DURING THIS PERIOD, TACP WILL, AT TACP’S OPTION, REPAIR OR REPLACE A DEFECTIVE PART WITH A NEW OR REFURBISHED PART WITHOUT CHARGE TO YOU FOR THE PART, PROVIDED THAT IF A DEFECTIVE PART IS REPAIRED OR REPLACED AFTER NINETY (90) DAYS FROM THE DATE OF ORIGINAL RETAIL PURCHASE, YOU MUST PAY ALL LABOR CHARGES INVOLVED IN THE REPAIR OR REPLACEMENT. YOU MUST DELIVER THE ENTIRE TELEVISION TO AN AUTHORIZED TACP SERVICE STATION. YOU MUST PAY FOR ALL TRANSPORTATION AND INSURANCE CHARGES FOR THE TELEVISION TO AND FROM THE SERVICE STATION.

Limited Two (2) Year Warranty on Picture Tube*

TACP further warrants the picture tube in this television against defects in materials or workmanship for a period of two (2) years after the date of original retail purchase. DURING THIS PERIOD, TACP WILL, AT TACP’S OPTION, REPAIR OR REPLACE A DEFECTIVE PICTURE TUBE WITH A NEW OR REFURBISHED PICTURE TUBE WITHOUT CHARGE TO YOU, EXCEPT THAT IF A DEFECTIVE PICTURE TUBE IS REPAIRED OR REPLACED AFTER NINETY (90) DAYS FROM THE DATE OF THE ORIGINAL RETAIL PURCHASE, YOU MUST PAY ALL LABOR CHARGES INVOLVED IN THE REPAIR OR REPLACEMENT. YOU MUST DELIVER THE ENTIRE TELEVISION TO AN AUTHORIZED TACP SERVICE STATION. YOU MUST PAY FOR ALL TRANSPORTATION AND INSURANCE CHARGES FOR THE TELEVISION TO AND FROM THE SERVICE STATION.

Rental Units

The warranty for rental units begins with the first rental or thirty (30) days from the date of shipment to the rental firm, whichever comes first.

*Commercial Units

Televisions sold and used for commercial purposes have a limited ninety (90) day warranty for all parts, labor and picture tube.

Owner’s Manual and Product Registration Card

Read this owner’s manual thoroughly before operating this television. Complete and mail the enclosed product registration card or register your product on-line at www.tacp.toshiba.com/service as soon as possible. By registering your product you will enable TACP to bring you new products specifically designed to meet your needs and help us to contact you in the unlikely event a safety notification is required under the Consumer Product Safety Act. Failure to complete and return the product registration card does not diminish your warranty rights.

Your Responsibility

THE ABOVE WARRANTIES ARE SUBJECT TO THE FOLLOWING CONDITIONS:

(1) You must provide your bill of sale or other proof of purchase. (2) All warranty servicing of this television must be made by an

Authorized TACP Service Station.

original consumers in the United States. THESE

OR ANY PERSON RECEIVING THIS TELEVISION AS A

(3) Warranties from TACP are effective only if the television is purchased

and operated in the U.S.A. or Puerto Rico.

(4) Labor service charges for set installation, setup, adjustment of

customer controls and installation or repair of antenna

not covered by these warranties. Reception problems caused by

inadequate antenna systems are your responsibility.

(5) Warranties extend only to defects in materials or workmanship as

limited above and do not extend to any television or parts which

have been lost or discarded by you or to damage to television or

parts caused by fires, misuse, accident, Acts of God, such as

lightning or fluctuations in electric power, improper installation,

improper maintenance or use in violation of instructions furnished by

TACP; or to units which have been modified or had the serial number

removed, altered, defaced or rendered illegible.

How to Obtain Warranty Services

If, after following all of the operating instructions in this manual and checking

the section “Troubleshooting”, you find that service is needed:

(1) To find the nearest TACP Authorized Service Station, visit TACP’s

web site at www.tacp.toshiba.com, or call toll-free 1-800-631-3811.

(2) You must deliver the entire television to a TACP Authorized Service

Station and present your bill of sale or other proof of purchase. You

must pay for all transportation and insurance charges for the

television to and from the Service Station.

systems are

For additional information, visit TACP’s web site: www.toshiba.com/tacp.

ALL WARRANTIES IMPLIED BY THE LAW OF ANY STATE OF THE

U.S.A., INCLUDING THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,

ARE EXPRESSLY LIMITED TO THE DURATION OF THE LIMITED

WARRANTIES SET FORTH ABOVE. WITH THE EXCEPTION OF ANY

WARRANTIES IMPLIED BY THE LAW OF ANY STATE OF THE U.S.A. AS

HEREBY LIMITED, THE FOREGOING WARRANTY IS EXCLUSIVE AND

IN LIEU OF ALL OTHER WARRANTIES, GUARANTEES, AGREEMENTS,

AND SIMILAR OBLIGATIONS OF TACP WITH RESPECT TO THE

REPAIR OR REPLACEMENT OF ANY PARTS. IN NO EVENT SHALL

TACP BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES

(INCLUDING, BUT NOT LIMITED TO, LOST PROFITS, BUSINESS

INTERRUPTION, OR MODIFICATION OR ERASURE OF RECORDED

DATA CAUSED BY USE, MISUSE OR INABILITY TO USE THIS

PRODUCT).

No person, agent, distributor, dealer or company is authorized to change,

modify or extend the terms of these warranties in any manner whatsoever.

The time within which action must be commenced to enforce any obligation

of TACP arising under this warranty or under any law of the United States

or of any state thereof is hereby limited to 90 days from the date you

discover or should have discovered, the defect. This limitation does not

apply to implied warranties arising under the law of any state of the U.S.A.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU

MAY ALSO HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO

STATE IN THE U.S.A. SOME STATES OF THE U.S.A. DO NOT ALLOW

LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, WHEN

AN ACTION MAY BE BROUGHT, OR THE EXCLUSION OR LIMITATION

OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE

LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU UNDER

SUCH CIRCUMSTANCES.

FST PURE

Products, L.L.C.

is a registered trademark of Toshiba America Consumer

Welcome to

Toshiba

Connecting

your TV

Remote Control

Using the

Setting up

your TV

Using the TV’s

Features

Appendix

J3S00121A(E)_P26-BACK 13/01/2005, 5:42 PM31

Page 32

National Service Division

ColorStream®, FST Pure® and StableSound® are registered trademarks of Toshiba America Consumer Products, L.L.C. GameTimer is a trademark of Toshiba America Consumer Products, L.L.C.

PRINTED IN THAILAND

J3S00121A(E)_P26-BACK 13/01/2005, 5:42 PM32