Printing Overview2
Basic Printing3
Starting the Printer Driver Using the "Start" Button4
Printer Driver Settings5
Printing a Watermark6
Fitting the Printed Image to the Paper7
Printing Multiple Pages on One Page8
Outline of the Print Status Window9
Scan
3
Troubleshooting
4
Identifying Unit Problems22
Check the Connection between the Unit and Computer 23
Check Your Computer24
Plug and Play Screen does not Appear (when the USB is connected)
Failed to Install the MFP Driver (Windows 2000/XP)26
Faint, Uneven or Smeared Print Output27
Characters or Graphics are not Printed in Correct Position
Nothing Prints29
Poor Scanning Result30
The Scanned Image is Incorrectly Positioned31
Unable to Scan the Image32
Uninstalling TOSHIBA Personal MFP Series Software33
Index
5
25
28
Scanning Overview10
Scanning an Image from a TWAIN-Compliant Application
Scanning an Image from a WIA-Compliant Application (Windows XP)
Scanning an Image from the "Scanner and Camera Wizard" (Windows XP)
Outline of Button Manager20
Button Manager Settings21
11
15
17
1
How to Use the Online Manual
This Online Manual provides instruction for the operation of your new unit. Please read the following explanation of how
to use the Online Manual, and then search for the information that you need.
For more information about computers, operating systems and Acrobat Reader, please refer to the relevant manual or
help file.
How to Control the Online Manual
Click this button to display the Table of
Contents of the Online Manual. From the Table
of Contents you can jump to various pages.
Click this button to display the Index of the
Online Manual. From the Index you can
jump to various pages.
Following links
Links can connect parts of a document to other parts for further information. In this document, green colored letters are linked areas.
To follow a link, select a hand tool (), a zoom tool or a selection tool. Position the pointer over the linked area on the page until the pointer
changes to a hand with a pointing finger (). Then click the link.
Using Bookmarks
This online manual has Bookmarks on the main pages of each section. You can move to the desired pages by simply clicking its bookmark.
CONTENTS
INDEX
Takes you back page by page. To return to the previous link,
click the ( ) button on the menu bar of the Acrobat Reader.
1
Takes you forward page by page.
How to Print Out the Online Manual
In order to print out a hard copy of the Online Manual for your reference, go to Acrobat Reader, click the "File" menu, and
select "Print". After specifying the printer setting, click the "Print" ("OK" on Windows 95/98/Me/NT 4.0) button to print.
! In this online manual, screen images and operating procedures are mainly for Windows XP. With other versions
of Windows, some screen images may be different from those in this manual.
Note
! The screen illustrations shown in this online manual are mainly screens of e-STUDIO120.
CONTENTS
INDEX
1
INDEX
CONTENTS
2
The flow chart shown below provides printing overview.
Reference: For more information on printing, see Basic Printing.
Caution
Printing Overview
z When the paper source is the paper tray, verify that the paper has been loaded before starting printing.
z Ensure printing has been completed before turning the power off. Do not remove the power cord before turning
the unit off.
When printing from paper trayWhen printing from multi-bypass
Prepare the document you intend to print
Open the printer driver setup screen and set the print preferences
Reference:
Printer Driver Settings, Printing a Watermark, Fitting the Printed Image to the Paper,
Printing Multiple Pages on One Page
Send print data from your computer
Printing
Exit printing
2
This is a printing example using WordPad to print a document onto A4 size paper.
Basic Printing
1
2
3
Start WordPad, make a new file, and enter the text
you intend to print.
Select "Print" from the application's "File" menu.
Click here.
Make sure that "TOSHIBA e-STUDIOxxx" is selected
as the current printer. If you intend to change any
print setting, click the "Preferences" button to open
the printer driver setup screen.
On Windows 95/98/Me/NT 4.0, click the "Properties" button.
Identify the current printer
1
in this box.
4
Reference: See "BYPASS FEED (including special paper)" in the
Click the "Print" button in the "Print" dialog box.
On Windows 95/98/Me/NT 4.0, click the "OK" button.
Click here.
Operator’s Manual for more details on inserting paper.
Click this button to change
2
any print preference.
Reference: Printer Driver Settings, Printing a Watermark, Fitting the
Printed Image to the Paper, Printing Multiple Pages on
One Page
Windows 2000 does not have the "Preferences"
button on this dialog box. Switch to the desired
Note
tab by clicking it to specify printer settings.
CONTENTS
3
INDEX
INDEX
CONTENTS
2
You can open the printer driver and change the printer driver settings from the Windows "start" button. Settings adjusted
in this way will be the initial settings when you print from an application. (If you change the settings from the printer
driver setup screen at the time of printing, the settings will revert to the initial settings when you quit the application.)
Reference: Basic Printing
Windows 2000/XP
Starting the Printer Driver Using the "Start" Button
Windows 95/98/Me/NT 4.0
1
2
3
Click the "start" button, and then click "Control
Panel".
On Windows 2000, click the "Start" button and select
"Settings".
Click "Printers and Other Hardware", and then click
"Printers and Faxes".
On Windows 2000, click "Printers".
Click the "TOSHIBA e-STUDIOxxx" printer driver
icon and select "Properties" from the "File" menu.
1
2
3
Click the "Start" button, select "Settings" and then
click "Printers".
Click the "TOSHIBA e-STUDIOxxx"printer driver
icon andselect "Properties" from the "File" menu.
On Windows NT 4.0, select "Document Defaults"
to open the printer driver setup screen.
Note
On Windows 95/98/Me, click the"Setup"tab.
4
Reference: Printer Driver Settings
Click the "Printing Preferences" button in the
"General" tab.
The printer driver setup screen will appear.
The printer driver setup screen will appear.
Reference: Printer Driver Settings
4
Printer Driver Settings
To view Help for a setting, click the () button in the upper right-hand corner of the window and then click the setting.
( ) button
Tab
Index which allows you to
switch between the various
setup screens.
The settings you made at
"N-Up Printing", "Fit To Paper
Size", "Image Orientation" and
"Watermark" are shown in this
image.
Check box
Click this option to activate/
deactivate each function.
Click this button and then click a
setting to view Help for the setting.
You can also view Help by
right-clicking the setting
Note
with the mouse.
Drop-down list
Allows you to make one selection
from a list of choices.
"Apply" button
Click to save your settings without
closing the dialog box.
The tray selected in
"Paper Selection" in the
"Paper" tab appears in blue.
You can also click on a tray
to select it.
"OK" button
Click this button to save your
settings, and exit the dialog
box.
"Cancel" button
Click this button to exit the dialog box
without making any changes to the
settings.
Note
CONTENTS
INDEX
Windows NT 4.0 does not
have the "Apply" button
on each screen.
The "Apply" button does
not appear when you
open this window from an
application.
5
INDEX
CONTENTS
2
To print a watermark, for example "CONFIDENTIAL", on your document, refer to the following steps. Open the printer
driver and click the "Watermarks" tab.
Reference: See Basic Printing for details on how to open the printer driver.
How to Print a Watermark
From the "Watermark" drop-down list, select the watermark, for example "CONFIDENTIAL", you wish to print on your
document, and start printing.
Printing a Watermark
Print sample
For details on watermark settings, view printer driver Help.
Reference: Printer Driver Settings
6
INDEX
CONTENTS
2
This printer driver can adjust the zoom ratio for printing according to the paper loaded in the unit.
Follow the steps shown below to use this function. The instruction below assumes that you intend to print an A4 size
document onto an A5 size paper.
Fitting the Printed Image to the Paper
The "Fit To Paper Size" setting is not available when "N-Up Printing" is selected.
Reference: Printing Multiple Pages on One Page
Note
1
2
3
Click the "Paper" tab in the printer driver setup
screen.
Select the paper size for the print data from "Paper
Size".
Check the "Fit To Page" box.
4
Select the paper size for "Fit To Paper Size", which
corresponds to the size of paper in the unit.
Now, the printed image will automatically fit the paper
set in the unit.
Paper Size: A4
Fit To Paper Size: A5
A5 size paper
A4 size document
(Paper Size)
(Fit To Paper Size)
7
INDEX
CONTENTS
2
This feature allows you to print two or four document pages onto a single page.
To use this function, open the printer driver setup screen, select "2-Up" or "4-Up" for "N-Up Printing" on the "Main" tab.
Printing Multiple Pages on One Page
The "N-Up Printing" setting is not available when "Fit To Paper Size" is selected.
Reference: Fitting the Printed Image to the Paper
Note
BorderBorderN-Up
"2-Up"
"4-Up"
If you select the "Border" checkbox, border lines will be printed on each page.
8
2
When printing begins, the Print Status Window activates and appears on the screen.
The Print Status Window is a program designed to show the current printer status including the document name being
printed and error messages.
Outline of the Print Status Window
Status icon
This icon informs you of the print status.
Tab
Index which allows you to switch
between the two setup screens.
"Close" button
Click this button to close the Print
Status Window.
Status window
Provides details on the current
status of the print job.
Document Name
Displays the name of the active print
job.
"Cancel Job" button
Click this button during printing to
cancel the job that is currently being
executed.
"Help" button
Click this button to display help file
for the Print Status Window.
CONTENTS
INDEX
9
Loading...
+ 25 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.