Page 1
User Manual
Mainenance+Warranty
T10 E10 S10
T12 E12 S12
SIC58
Page 2
Page 3
Welcome to Torrot
Thank you for becoming the owner of one of
our funny electric motorbikes KIDS10 / KIDS12
for young riders!
In this manual you will nd information about how to
use and how to do the maintenance of your KIDS.
You will also nd information about the Torrot Electric’s
two years warranty that your new motorcycle has.
Page 4
T12 E12 S12
KIDS
SCHOOL
USB
MAPPING
2 YEARS
TORROT
ELECTRIC
WARRANTY
MOTOR
BRUSHLESS
48V
POWER
KIDS10 FROM
350 TO 1050W
KIDS12 FROM
600 TO 1500W
LITHIUM
BATTERY
BRAKE DISCSYOUNG
ELECTRIC
3-9
Page 5
5
KIDS
User Manual
Table of
contents
INTRODUCTION 06
THE KIDS 07
SPECIFICATIONS 08
COMPONENTS 14
CONTROLS 15
BEFORE USING IT 16
MAINTENANCE 18
BATTERY 19
BATTERY PRECAUTIONS 20
RECHARGE 21
ACCESS TO BATTERY KIDS10 22
ACCESS TO BATTERY KIDS12 23
BATTERY REMOVAL KIDS10 24
BATTERY REMOVAL KIDS12 25
ECU MAPPING 26
PC ECU MAPPING 27
BLUETOOTH APP 28
WIRING DIAGRAM I 30
WIRING DIAGRAM II 31
WARNINGS AND SECURITY 32
FAQ 33
TROUBLESHOOTING 34
WARRANTY 37
Page 6
6
KIDS
User Manual
INTRODUCTION
The KIDS electric motorbike series for young riders allow a very
powerful learning curve in both off-road and on-road riding. There is
nothing similar to these miniaturized endurcross and supermotard!
The KIDS have been designed to give a realistic and authentic rst impression
in terms of handling, ergonomics and performance. Furthermore, very
high passive safety standards have been added to allow a 100% positive
experience.
Besides fast learning and a lot of fun, the KIDS bring to your son strong
pedagogical values: equilibrium, concentration and responsibility. Also we
can’t forget that these e-motorcycles are clean, quiet, and very reliable. The
future is here ;- )
To experience them with the maximum intensity and security, we recommend
you to read this handbook and make your children understand that this is not a
toy and make him/her comprehend the warnings and safety advises we give,
this way you will know when and how to charge the battery, how to do the
basic maintenance of the motorbike, check the brakes, etc. with simple and
practical advices.
From Torrot Electric, we insistently advise you to use always a helmet and the
proper protection equipment to have a satisfactory, funny and 100% secure
experience.
If you still have any doubt after consulting this manual, go
to your Torrot’s point of sale or write to [email protected]
*No contractual images. Due to our constant improvement policy, Torrot Electric Europa
reserves its rights to introduce changes without notice in products or technical specications.
The images of the product showed here can dier noticeably from the product delivered.
Page 7
7
KIDS
User Manual
THE KIDS
The KIDS SERIES 10/12 are children’s electric motorbikes conceived
exclusively for boys and girls with maximum weight of 30kg for KIDS10
and 40kg for KIDS12. They are designed with care and passion by our
technicians to take the rst steps and initiate in the motorcycling world. The
KIDS are authentic miniaturized motorbikes, and with them, the youngest in
the household will learn, progress and have fun, turning into ‘little big’ riders.
The KIDS are not toys: please, parents or guardian must supervise the child
when using the motorbike!
With knobby tyres specic for trial practise, the T10/T12 offers to the young pilot
a perfect architecture to take its rst steps, with a very similar motorbike
that the one that is used by professionals. As a result of the most genuine
experience and developed by professional riders, lovers of this modality.
This trial motorbike can turn into a E10/E12 off-road motorbike with the special
kit. Take it into account!
The enduro electric motorbike of Torrot Electric has no rivals. Devilishly
beautiful, they will delight any child (and so do their parents), because of
the power offered thanks to their brushless motor and their lithium
batteries, they will offer (depending on the kind of use and other facts as the
ground or the rider’s weight) fun and ‘pro’ learning for 40 or more minutes (at
full speed). Their strong dynamics, their Italian EBS standard suspensions,
their almost indestructible fairing, their programmable power maps or their
off-road rims turn them into a unique motorbike.
Our supermotard has been designed to make an easier on-road learning
and progression in closed circuits (go-kart racing circuits, speed circuits...).
They have soft tyres for high speeds, with a good grip for a maximum speed
of 42 km/h offered by this model. They inherit the ergonomics of their E10/E12
siblings, for young riders and future child prodigies that desire to begin in the
motorcycling world.
QUALITY
T10/T12
S10/S12
E10/E12
Page 8
8
KIDS
SPECIFICATIONS E10
CHASSIS TUBULAR CrMo STEEL FRAME
FRONT SUSP. EBR FORK (WHEEL TRAVEL 75mm)
REAR SUSP.
SHOCK ABSORBER PRELOAD ADJUSTMENT (WHEEL TRAVEL 100mm)
BRAKES
HYDRAULIC BRAKE SYSTEM 160mm DISCS FRONT AND
REAR
MOTOR CONTROLLER
48V PROGRAMMABLE TOP SPEED, POWER, THROTTLE
SENSITIVITY AND REGENERATION
POWER 350 W-1050 W / MAX. SPEED 40 KM/H
BATTERY
48V LiNiCoMn 6,6Ah WITH BMS INTEGRATED (Battery Management System) REMOVABLE
RIMS ALUMINUM 10” x 1.60
TYRES MITAS C12 2.50-12 TT 37J
WEIGHT 22kg
MAX PILOT WEIGHT 30kg
CHARGER 54.6V 2A BATTERY CHARGER (4 HOURS)
OTHERS
POWER TRAIN MANAGEMENT SOFTWARE INCLUDED.
(RS232-USB CABLE REQUIRED)
iNCLUDES POWER SWITCH 50-100%
DESIGNED AND MANUFACTURED IN EUROPE
OPTIONAL
BLUETOOTH MODULE VIA APP (iOS/Android)
REMOTE PARAMETER PROGRAMMING AND PARENTAL
CONTROL TORROT INVERTER FOR CAR CHARE (LIGHTER
SOCKET)
HANDLEBAR PROTECTOR
TRAINING WHEELS
*Designed and made in barcelona
3-7
HANDLEBAR WIDTH 580mm
1200mm
850mm
545mm
790mm
220mm
User Manual
SPECIFICATIONS
Page 9
9
KIDS
User Manual
SPECIFICATIONS
E12
6-9
SPECIFICATIONS E12
CHASSIS TUBULAR CrMo STEEL FRAME
FRONT SUSP. HYDRAULIC FORK (WHEEL TRAVEL 100mm)
REAR SUSP. DNM GAS SHOCKABSORBER. PRELOAD ADJUSTMENT
BRAKES
HYDRAULIC BRAKE SYSTEM 160mm DISCS FRONT AND
REAR
MOTOR CONTROLLER
48V PROGRAMMABLE TOP SPEED, POWER, THROTTLE
SENSITIVITY AND REGENERATION
POWER 600 W-1500 W / MAX. SPEED 52 KM/H
BATTERY
48V LiNiCoMn 8,8Ah WITH BMS INTEGRATED (Battery Management System) REMOVABLE
RIMS ALUMINUM 12” x 1.60
TYRES MITAS C19 2.50-12 TT 37M
WEIGHT 30kg
MAX PILOT WEIGHT 40kg
CHARGER 54.6V 2A BATTERY CHARGER (4 HOURS)
OTHERS
POWER TRAIN MANAGEMENT SOFTWARE INCLUDED.
(RS232-USB CABLE REQUIRED)
iNCLUDES POWER SWITCH 50-100%
DESIGNED AND MANUFACTURED IN EUROPE
OPTIONAL
BLUETOOTH MODULE VIA APP (iOS/Android)
REMOTE PARAMETER PROGRAMMING AND PARENTAL
CONTROL TORROT INVERTER FOR CAR CHARE (LIGHTER
SOCKET)
HANDLEBAR PROTECTOR
*Designed and made in Barcelona
..
950mm
610mm
805mm
210mm
HANDLEBAR WIDE /ANCHO MANILLAR 580mm
Page 10
10
KIDS
User Manual
SPECIFICATIONS
3-7
SPECIFICATIONS T10
CHASSIS TUBULAR CrMo STEEL FRAME
FRONT SUSP. EBR FORK (WHEEL TRAVEL 75mm)
REAR SUSP.
SHOCK ABSORBER PRELOAD ADJUSTMENT (WHEEL TRAVEL 100mm)
BRAKES
HYDRAULIC BRAKE SYSTEM 160mm DISCS FRONT AND
REAR
MOTOR CONTROLLER
48V PROGRAMMABLE TOP SPEED, POWER, THROTTLE
SENSITIVITY AND REGENERATION
POWER 350 W-1050 W / MAX. SPEED 30 KM/H
BATTERY
48V LiNiCoMn 6,6Ah WITH BMS INTEGRATED (Battery Management System) REMOVABLE
RIMS ALUMINUM 10” x 1.60
TYRES MITAS C12 2.50-12 TT 37J
WEIGHT 22kg
MAX PILOT WEIGHT 30kg
CHARGER 54.6V 2A BATTERY CHARGER (4 HOURS)
OTHERS
POWER TRAIN MANAGEMENT SOFTWARE INCLUDED.
(RS232-USB CABLE REQUIRED)
iNCLUDES POWER SWITCH 50-100%
DESIGNED AND MANUFACTURED IN EUROPE
OPTIONAL
BLUETOOTH MODULE VIA APP (iOS/Android)
REMOTE PARAMETER PROGRAMMING AND PARENTAL
CONTROL TORROT INVERTER FOR CAR CHARE (LIGHTER
SOCKET)
HANDLEBAR PROTECTOR
TRAINING WHEELS
*Designed and made in barcelona
HANDLEBAR WIDTH 580mm
1200mm
850mm
440mm
790mm
220mm
Page 11
11
KIDS
User Manual
SPECIFICATIONS
t12
6-9
SPECIFICATIONS T12
CHASSIS TUBULAR CrMo STEEL FRAME
FRONT SUSP. HYDRAULIC FORK (WHEEL TRAVEL 100mm)
REAR SUSP.
DNM GAS SHOCKABSORBER. PRELOAD ADJUSTMENT
(WHEEL TRAVEL 125mm)
BRAKES
HYDRAULIC BRAKE SYSTEM 160mm DISCS FRONT AND
REAR
MOTOR CONTROLLER
48V PROGRAMMABLE TOP SPEED, POWER, THROTTLE
SENSITIVITY AND REGENERATION
POWER 600 W-1500 W / MAX. SPEED 40 KM/H
BATTERY
48V LiNiCoMn 8,8Ah WITH BMS INTEGRATED (Battery Management System) REMOVABLE
RIMS ALUMINUM 12” x 1.60
TYRES TRIAL 2.50-12
WEIGHT 30kg
MAX PILOT WEIGHT 40kg
CHARGER 54.6V 2A BATTERY CHARGER (4 HOURS)
OTHERS
POWER TRAIN MANAGEMENT SOFTWARE INCLUDED.
(RS232-USB CABLE REQUIRED)
iNCLUDES POWER SWITCH 50-100%
DESIGNED AND MANUFACTURED IN EUROPE
OPTIONAL
BLUETOOTH MODULE VIA APP (iOS/Android)
REMOTE PARAMETER PROGRAMMING AND PARENTAL
CONTROL TORROT INVERTER FOR CAR CHARE (LIGHTER
SOCKET)
HANDLEBAR PROTECTOR
*Designed and made in Barcelona
..
950mm
535mm
805mm
210mm
HANDLEBAR WIDE /ANCHO MANILLAR 580mm
Page 12
12
KIDS
User Manual
SPECIFICATIONS
3-7
SPECIFICATIONS S10
CHASSIS TUBULAR CrMo STEEL FRAME
FRONT SUSP. EBR FORK (WHEEL TRAVEL 75mm)
REAR SUSP.
SHOCK ABSORBER PRELOAD ADJUSTMENT (WHEEL TRAVEL 100mm)
BRAKES
HYDRAULIC BRAKE SYSTEM 160mm DISCS FRONT AND
REAR
MOTOR CONTROLLER
48V PROGRAMMABLE TOP SPEED, POWER, THROTTLE
SENSITIVITY AND REGENERATION
POWER 350 W-1050 W / MAX. SPEED 40 KM/H
BATTERY
48V LiNiCoMn 6,6Ah WITH BMS INTEGRATED (Battery Management System) REMOVABLE
RIMS ALUMINUM 10” x 1.60
TYRES MITAS MC34 90/90-10 50P TL
WEIGHT 22kg
MAX PILOT WEIGHT 30kg
CHARGER 54.6V 2A BATTERY CHARGER (4 HOURS)
OTHERS
POWER TRAIN MANAGEMENT SOFTWARE INCLUDED.
(RS232-USB CABLE REQUIRED)
iNCLUDES POWER SWITCH 50-100%
DESIGNED AND MANUFACTURED IN EUROPE
OPTIONAL
BLUETOOTH MODULE VIA APP (iOS/Android)
REMOTE PARAMETER PROGRAMMING AND PARENTAL
CONTROL TORROT INVERTER FOR CAR CHARE (LIGHTER
SOCKET)
HANDLEBAR PROTECTOR
TRAINING WHEELS
*Designed and made in barcelona
HANDLEBAR WIDTH 580mm
1190mm
850mm
535mm
780mm
195mm
Page 13
13
KIDS
User Manual
SPECIFICATIONS
s12
6-9
SPECIFICATIONS S12
CHASSIS TUBULAR CrMo STEEL FRAME
FRONT SUSP. HYDRAULIC FORK (WHEEL TRAVEL 100mm)
REAR SUSP.
DNM GAS SHOCKABSORBER. PRELOAD ADJUSTMENT
(WHEEL TRAVEL 125mm)
BRAKES
HYDRAULIC BRAKE SYSTEM 160mm DISCS FRONT AND
REAR
MOTOR CONTROLLER
48V PROGRAMMABLE TOP SPEED, POWER, THROTTLE
SENSITIVITY AND REGENERATION
POWER 600 W-1500 W / MAX. SPEED 52 KM/H
BATTERY
48V LiNiCoMn 8,8Ah WITH BMS INTEGRATED (Battery Management System) REMOVABLE
RIMS ALUMINUM 12” x 1.60
TYRES SUPERMOTARD 90/90 12
WEIGHT 30kg
MAX PILOT WEIGHT 40kg
CHARGER 54.6V 2A BATTERY CHARGER (4 HOURS)
OTHERS
POWER TRAIN MANAGEMENT SOFTWARE INCLUDED.
(RS232-USB CABLE REQUIRED)
iNCLUDES POWER SWITCH 50-100%
DESIGNED AND MANUFACTURED IN EUROPE
OPTIONAL
BLUETOOTH MODULE VIA APP (iOS/Android)
REMOTE PARAMETER PROGRAMMING AND PARENTAL
CONTROL TORROT INVERTER FOR CAR CHARE (LIGHTER
SOCKET)
HANDLEBAR PROTECTOR
*Designed and made in Barcelona
..
950mm
610mm
805mm
210mm
HANDLEBAR WIDE /ANCHO MANILLAR 580mm
Page 14
14
KIDS
User Manual
COMPONENTS
BRAKE DISC
TYRE
RIM
FORK
MUDGUARD
HANDLEBAR
BRAKE CALIPER
CHASSIS
MOOTREST
SHOCK ABSORBER
SWING ARM
SIDESTAND
SEAT
CHAIN
CHAIN TENSIONER
ON/OFF SWITCH
CHARGING PLUG
SERIAL NUMBER
a
b
c
d
e
f
g
h
i
j
k
l
b
m
e
d
g
a
b
c
d
e
f
g
h
i
k
l
m
n
o
j
n
o
f
q
q
r
s
t
v
POWER MODE SWITCH
r
s
t
u
u
v
CONTROLLER
MOTOR
BATTERY
IGNITION KEY
p
p
Page 15
15
KIDS
User Manual
CONTROLS
To turn on the motorcycle turn the key in
ON position and press the red “ON/OFF” button
placed in the handlebar, next to the throttle grip.
When pushing it inwards the KIDS is ready to
ride. turn slightly the throttle grip to check if the
motor is working. To switch it off, press again the
same button.
Do not forget to fold the sidestand before riding
the motorbike.
The KIDS has a switch in the lower lefthand
art of the number plate. You can choose between
the full power option (100% of power)
or limit it to 50% of power.
* It is possible to map the control unit with a
RS232 connector / Bluetooth. To do it, check the
pages 26, 27 and 28, 29 of this manual.
REMEMBER TO SWITCH OFF
YOUR KIDS WHEN YOU ARE
NOT USING IT OR WHEN IS
GETTING CHARGED
a. On/O Switch
b. Throttle
c. Front Brake
e. Brake levers adjustment
d. Rear Brake
f. Power Mode Switch
a
f
100%
50%
TO AVOID INJURIES DURING THE USAGE, JUST PUT THE
KEY IN THE ON POSITION AND THEN TAKE IT OUT.
Page 16
16
KIDS
User Manual
BEFORE USING IT
If you receive your KIDS in a box, verify that it contains the following
elements:
KIDS Motorbike with the handlebar disassembled.
4 allen M6 screws (preassembled in the handlebar clamp).
A box with charger and the power cord.
An information leaet.
HANDLEBAR ASSEMBLY
Unscrew the 4 preassembled M6 screws with a Nº 5 allen key. Extract
the plastic pipe and put the handlebar in its place. Check that the brake
lines have a natural position, in front of the KIDS.
Put the handlebar clamp on top of the handlebar and screw it slightly.
Adjust the handlebar position so it remains centered.
Rotate the handlebar so the brake levers are in a proper angle. To nish,
screw the four screws in a crossed sequence.
When we assemble each motorcycle in our factory Mataró, we test the
proper operation one by one. However, we want to ask you to check again
some components and t them to your necessities and tastes:
TYRE PRESSURE
A standard pressure of 1 bar (kg/cm2) is recommended for our models. The
correct pressure will increase the battery range and its drivability. Check
the attached table with recommendations for each model.
ALLEN Nº5
10/20º
1
2
3
x4
1
2
3
*RECOMMENDED PRESSURE FOR DRY, WET AND WITH MUD ENVIROMENTS.
AND FOR A 20KG RIDER. TO ADJUST THE CORRECT PRESSURE IN THE TRIAL
MOTORBIKE, YOU WILL NEED A SPECIAL MANOMETER.
RECOMMENDED PRESSURES TABLE* BAR (Kg/cm2)
MODEL FRONT REAR
0,9 0,6-0,8
1,0 1,2
1,2 1,4
T12T10
S12
S10
E10 E12
YOU MUST DO A FULL BATTERY CHARGE
BEFORE THE FIRST USE
Page 17
17
KIDS
1
User Manual
BEFORE USING IT
BRAKES
The KIDS are equipped with a cable-actuated disc brakes system. Check that
both front and rear brakes work properly using the left and right brake levers
while moving the motorcycle slightly.
If the brake lever is far from your child’s ngers, you can bring them closer to the
grip using the screw with an allen key.
BRAKES MAINTENANCE
In order to preserve the effectiveness of the braking system of your KIDS, it is
important to do an inspection after every use:
- If there are less than 2mm of useful material in the brake pads, they should be
replaced
- If the brake levers have too much range, a bleeding of the braking system need
to be carried out.
WARNING: This operations is difcult so if you don’t have the knowledge required
you better go to your nearest Dealer.
HOW TO ADJUST THE PRELOAD OF THE SHOCK ABSORBER
You can adjust the preload of the shock absorber to adapt the rear suspension to
the weight and preferences of your child. Using a hook wrench for dampers,
turn the nut which supports the spring. The more you compress the spring,
the more preload you will get.
There are springs available in our shop:
KIDS10: 01RT-00100-ZZ (550lb/in) o 01RT-00021-ZZ (750lb/in)
KIDS12: 02RT-00030-ZZ (450lb/in) o 02RT-00040-ZZ (650lb/in)
1
3
2
2
3
DURING THE USE, THE BRAKES CAN REACH HIGH
TEMPERATURES. DO NOT TOUCH THE BRAKES IN ANY
CASE DURING OR JUST AFTER THE USE.
ESPECIFICACIONES S12
CHASIS TUBULAR DE ACERO CrMob
SUSP. DELANTERA
HORQUILLA HIDRÁULICA EBR (RECORRIDO RUEDA
100mm)
SUSP. TRASERA
AMORTIGUADOR HIDRAULICO DNM. AJUSTE EN PRECARGA (RECORRIDO RUEDA 125mm)
FRENOS
SISTEMA FRENOS HIDRAULICO. DISCOS (160mm) DEL./
TRAS.
CONTROLADORA
MOTOR
48V PROGRAMABLE VELOCIDAD MAX, POTENCIA, TACTO ACELERADOR Y REGENERACIÓN
POTÉNCIA 600W-1500W / VELOCIDAD MÁX.52 KM/H
BATERÍA
48V LiNiCoMn 6,6Ah CON BMS (Battery Management System) INTEGRADO, EXTRAIBLE.
LLANTAS ALUMINIO 1.85x12”
NEUMÁTICOS SUPERMOTAR 90/90-12
PESO 30kg
PESO MAX. PILOTO 40kg
CARGADOR 54.6V 2A CARGADOR DE BATERÍA (4 HORAS)
VARIOS
SOFTWARE CONFIGURACIÓN INCLUIDO (REQUIERE
CABLE RS232-USB)
iNCLUYE SWITCH DE POTENCIA 50-100%
DISEÑADA Y FABRICADA EN EUROPA
OPCIONAL
MODULO BLUETOOTH VIA APP (iOS/Android)
PROGRAMACIÓN REMOTA Y CONTROL PARENTAL
INVERSOR TORROT PARA CARGA EN COCHE (TOMA
ENCENDEDOR)
PROTECTOR GOMA MANILLAR
*Diseñada y ensamblada en Barcelona
Page 18
18
KIDS
User Manual
MAINTENANCE
CHAIN TENSION EXAM
The lifespan of the chain depends on its correct lubrication and adjustment. A bad
maintenance can cause a premature wear or damages to the chain and to the
rear/front sprockets.
Before doing the maintenance to the chain, turn OFF the ON/OFF switch. For a
better measurement, the pilot should be sitting in the saddle in the driving position
because when there is no weight applied, the chain is more stretched.
Check the movement up and down in the centre of the lower part of the chain as
is showed in the image . The tension must allow a vertical movement from 10
to 20mm.
Turn the wheel slightly and check the chain movement in different points,
measuring always the gap in the same place.
Examine the teeth in the front and rear sprocket to see if they are wore away or
damaged.
ADJUST YOUR MOTORCYCLE CHAIN TENSION
If the vertical movement of the chain is not inside the recommended values,
adjust the tension as indicated below:
- With a 19 mm wrench unbolt the rear axle .
- Turn the eccentrics of both sides by pushing the wheel backwards to stretch
the chain and push it frontwards to do the opposite.
- Screw the axle again ensuring that the chain and the front and rear sprockets
are aligned. Check the movement of the chain again.
10-20 mm
1
2
3
1
2
3
Page 19
19
KIDS
User Manual
BATTERY
The KIDS10 is provided with a LiNiCoMn 48V and 6.6Ah (316.8Wh of
capacity) battery which supplies the motor. The KIDS12 has a battery of
48V and 8,8Ah (422,4Wh).
This kind of battery does not have the ‘memory effect’ and can be recharged
even if they are not fully discharged.
- The complete capacity of the battery will be achieved after several charge
and discharge cycles. Then you will get more battery range after the rst
uses.
- The KIDS is delivered with the battery at half capacity.
- Always try to charge the battery completely.
- For the correct maintenance of the KIDS, it is recommended to do a full
discharge and charge cycle at least once per month even if the motorbike
is not used.
- If you prevent that you KIDS is will not be used in 1 month or more and
is not possible to charge the battery at least once in a month, you shoud
leave the charger connected to the battery, it will provide maintenance to
the battery and won’t consume extra energy.
-The charger is a component that can heat up noticeably during its use.
Therefore they must be always used in places with good air circulation.-
Never cover it up and let it get wet.
- Use only the charger provided by Torrot Electric to charge the battery.
- The charge of the battery must be done in temperature conditions between
5 and 40ºC. Below 5ºC, the charge cycle will be increased and above 40ºC,
the battery can be damaged..
IT IS VERY IMPORTANT TO CHARGE THE BATTERY COMPLETELY
BEFORE THE FIRST TIME USE.
DO NOT LEAVE THE BATTERY DORMANT FOR LONG PERIODS OF TIME,
THEY CAN BE DAMAGED
ENSURE THAT YOU DO NOT LEAVE THE MOTORBIKE TURNED ON,
THIS WILL DISCHARGE THE BATTERY
Page 20
20
KIDS
User Manual
1. GENERAL
a. The battery is composed of lithium-ion cells with high density energy.
In any case it should be manipulated. The disobedience to this indication
involves electric and chemical risk and can result in serious damage or
injury.
b. Inspection, reparation or replacement of the battery or any of its elements by non-authorized manufacturers is prohibited.
c. Manipulation or reparation of any electric element external from the
battery by non-authorized manufacturers is prohibited.
2. BATTERY DAMAGE
All abusive treatment to the vehicle can affect the battery’s lifespan. To keep
it in good condition and extend its lifespan, follow these instructions:
a. Avoid using the vehicle in conditions of extreme heat or cold beyond
the limits set by the manufacturer.
b. Avoid charging the battery in extreme conditions of heat or cold beyond
the limits set by the manufacturer.
c. During dormant periods, the vehicle must be stored in a dry place,
away from sources of cold and / or heat and direct sunlight.
d. Avoid unnecessary hits and vibrations to the vehicle. Periodically check
the insulation placed between the chassis and the battery of the vehicle is
in good condition. Otherwise, replace it.
e. The self-discharge is a natural characteristic of the battery and must be
controlled. For long periods of inactivity, you should periodically connect
the charger and perform full battery charges.
f. Avoid partial charges from the battery. For proper daily use, the battery
should always be fully charged.
g. As a general rule, it is advisable to keep the battery connected to the
charger for a certain time after the completion of a charge.
h. Never use any charger that has not been directly supplied by the manufacturer or an authorized dealer.
i. Avoid forcing the vehicle abnormally during use.
j. Your battery has internal protection against electrical hazards that can
act automatically. In case of a faulty operation or no operation of the battery, contact the manufacturer for repair.
k. Keep your battery clean and in good condition, carefully remove dust,
dirt and other external elements that can be introduced into the battery
compartment during use.
l. If you detect deterioration in the electrical system, disconnect the vehicle and contact an authorized Torrot dealer for repair service.
m. Avoid direct contact of the electrical system of your vehicle with water,
mud or similar environments. If water is accidentally introduced into any
electrical element of the vehicle, unplug it and wait for it to dry naturally
before using it again.
BATTERY PRECAUTIONS
Page 21
21
KIDS
User Manual
RECHARGE
To recharge the battery, follow these steps:
- First ensure that your motorbike is turned off with the ON/OFF switch outwards.
- Then plug the 3 pin connector to the KIDS. The charge connexion for the battery
is located in the front side of the chassis. It has a protection cover. Turn it to allow
the access to the plug.
- Afterwards, plug the charger to the socket (220-230V). After that, the led on the
charger will turn red to indicate that the battery is charging.
- The led will turn green when the battery will have nished the charge cycle. It
will take from 3 to 4 hours to do a complete recharge.
- After the charge cycle, disconnect rstly the plug from the outlet and, only after
that, the plug from the charger to the battery. In this moment your KIDS will be
ready to use it.
TO EXTEND THE LIFESPAN OF YOUR BATTERY, AVOID MID-CHARGES. WAIT
UNTIL THE LED TURN GREEN!
Recharge plug
REMEMBER TO COVER ALWAYS THE CHARGE PLUG TO AVOID THE DIRT
ENTRANCE
LED The battery is charging.
LED The battery is fully charged.
FUSE
LED
Page 22
22
KIDS
User Manual
ACCESS TO BATTERY KIDS10
Now, we will explain you how to remove part of the
fairing to have access to the battery in case you want
to disconnect it or change it for a new one.
First locate the screw that is used to attach
the saddle to the subchassis (only in the E10/S10
models). This is situated under the rear mudguard of
the motorbike. Unscrew it and remove the lock nut
with a 10mm wrench. Then remove the saddle.
The next step is unscrew with a number 5 allen key
the screw.
If you have the KIDS T10 you will only have to also
unscrew screw indicated in the next picture.
10mm WRENCH
5mm ALLEN KEY
T
T
1
2
1
T10
E10/S10
1
2
Page 23
23
KIDS
User Manual
ACCESS TO BATTERY KIDS12
Now, we will explain you how to remove part of the
fairing to have access to the battery in case you want
to disconnect it or change it for a new one.
First locate the screw that is used to attach
the saddle to the subchassis (only in the E10/S10
models). This is situated under the rear mudguard of
the motorbike. Unscrew it and remove the lock nut
with a 10mm wrench. Then remove the saddle.
Now you have access to the battery so read the next
pages in order to understand how to remove the
battery.
If you have the KIDS T10 you will only have to also
unscrew screw indicated in the next picture to have
access to the battery.
10mm WRENCH
T
T
1
T12
E12/S12
2
2
Page 24
24
KIDS
User Manual
BATTERY REMOVAL KIDS10
Having that part of ring removed, now is the moment to disconnect the
cords:
-Unplug the connector that goes to the recharge point.
-Finally disconnect the red and black wires.
In this moment you can remove the battery. To mount the battery again,
follow the instructions in reverse order.
1
1
2
2
THE VOLTAGE IN THE KIDS IS VERY HIGH. BE CAREFUL
WHEN YOU WORK WITH THE CORDS AND THE BATTERY
TERMINALS. A SHORT-CIRCUIT IN THE BATTERY
TERMINALS WILL DAMAGE THE BATTERY AND IT CAN
CAUSE A FIRE AND INJURIES TO THE PERSON.
Page 25
25
KIDS
Manual del Usuario
BATTERY REMOVAL KIDS12
Having that part of ring removed, now is the moment to disconnect the
cords:
-Unplug the connector that goes to the recharge point.
-Finally disconnect the red and black wires.
To remove the battery, unscrew the four screws from the following
picture and then proceed to remove the battery with its black box.
1
2
THE VOLTAGE IN THE KIDS IS VERY HIGH. BE CAREFUL
WHEN YOU WORK WITH THE CORDS AND THE BATTERY
TERMINALS. A SHORT-CIRCUIT IN THE BATTERY
TERMINALS WILL DAMAGE THE BATTERY AND IT CAN
CAUSE A FIRE AND INJURIES TO THE PERSON.
1
2
T
T
T
T
T
Page 26
26
KIDS
User Manual
ECU MAPPING
Apart from the power maps that can be selected with the switch
situated behind the number plate, the KIDS allows to programme
other power maps that t to your tastes and necessities.
To programme the KIDS’ controller you will need a RS232 connector
(or an USB-to-RS232 converter and the appropriate drivers, in case
your PC does not have a RS232 port) and the Torrot ePower software
installed in a PC. This software can be downloaded in the webpage
www.torrot.com. You can also congure the KIDS’ controller using the
bluetooth device available in Google Play or AppStore
Before connecting the computer or your mobile phone to the controller
ensure that your motorbike is switched on but the motor has been
turned off. That is, the throttle must not be activated in any moment.
To access to the controller and to the RS232 connector you will have
to remove the plastic of only one side of the chassis. The controller is
situated just behind the head tube.
Once you have the cord connected to the computer and to the
controller, and you have turned on the computer and the motorbike or
the bluetooth linked, open the software
1
1
THE EASIEST THING IS TO GO TO YOUR CLOSEST TORROT
ELECTRIC DEALER AND LET THEM CONFIGURE THE CONTROLLER
AS YOU WANT.
Page 27
27
KIDS
User Manual
PC ECU MAPPING
The Torrot ePower allows you to control three
parameters:
POWER
In this tab you can regulate the max power supplied
by the KIDS’ motor. 100% corresponds to full power
and 20% of the maximum power.
THROTTLE RESPONSE
This parameter regulates the how the motor supplies
the power when accelerating. The closer to the
minumum, the more immediate will be the power
supply. To novel riders, is recommended to begin with
high values (25%) that gives a more gradual power
supply.
MAX SPEED
This parameter regulates the top speed of the
motorybike
REGEN. SYSTEM
This parameter regulates the electric brake of the
motor, that hold back the motor when stop accelerating.
For high values, the motor will slow down faster. With
a value of 0%, the motorbike will roll free when the
throttle is released.
When you have all the parameters as you want, push
the ‘SEND’ button. In this moment you will have your
KIDS ready with the new power map installed.
BEFORE CONNECTING CONTROLLER TO THE COMPUTER OR YOUR MOBILE DEVICE ENSURE
THAT YOUR MOTORBIKE IS SWITCHED ON BUT THE MOTOR HAS BEEN TURNED OFF. THAT IS,
THE THROTTLE MUST NOT BE ACTIVATED IN ANY MOMENT
- Lead the previous conguration
- Send the new conguration to the motorbike
- Load a saved conguration
- Allows to save different congurations in the program to load them afterward to the motorbike
1
2
3
4
1
2
3
4
*Software compatible with Windows XP, Windows 7, Windows 8 and Windows 10
Page 28
28
KIDS
User Manual
BLUETOOTH DEVICE App available in Play Store and App Store
A bluetooth device (Ref. 03EL-00250-ZZ), you can add to the motorbike, has been developed in order to enable you to congure the same parameters of
the motorbike as the PC ECU MAPPING. Apart form that, it also provides a Parental Control over the motorbike using the phone.
2
App main menu.
From here you can select what you
want to do. Access the Parental
Control, Congurate the motorbike,
Scan again for devices, etc
*The app is compatible with devices from Android 4.4 and from iOs 8.0
Do you want
to continue?
x
The motor must be completely stopped
before you send the parameters to the
conroller.
OTHERWISE, YOU WILL
PERMANENTLY DAMAGE THE
CONTROLLER
3
After pressing “Conguration” this
screen is loaded. Only congure the
motorbike if the motor is stopped.
Otherwise, you will permanently
damage the controller and the
warranty will be voided.
1
When you open the app, it goes
directly to the scan for devices
screen. Press “Scan for Devices” in
order to nd your bluetooth device
and link your mobile phone to it.
Once you nd it in the list, enter the
PIN from the sticker and done!
KIDS
KIDS
#KIBT00001#
KIDS
torrot.com
DESIGNED AND ASSEMBLED IN SPAIN
BY TORROT ELECTRIC EUROPA S.L.
RoHS
BLUETOOTH
DEVICE ID: KIBT00001
PIN: XXXXXX
01EL-00250-ZZ
Page 29
29
KIDS
The parental control is used to control the activation using your mobile phone. Connecting or disconnecting the motorbike as explained in .
5
4
After accepting, this screen is
loaded. Look in the previous page
to know how to congure the
parameters. When nished, press
“Conrm Parameters”.
5
Parental control activation screen.
Parental contral allows you to
disconnect or connect the motor
from the distance from the mobile
phone.
6
The Parental Control also
disconnects the motorbike when it
goes out of range in order to prevent
the use if you are not nearby.
Push button to stop motorcycle
Enable parental control
Parental Control
KIDS
Out of signal
The motorcycle has been stopped
Enable parental control
Parental Control
KIDS
40%
80%
10%
60%
KIDS
CONFIRM PARAMETERS?
User Manual
*The app is compatible with devices from Android 4.4 and from iOs 8.0
BLUETOOTH DEVICE App available in Play Store and App Store
Page 30
30
KIDS
User Manual
WIRING DIAGRAM I
*If your chassis number is earlier than this, we recommend you to go to your Dealer and upgrade the system.
Page 31
31
KIDS
User Manual
WIRING DIAGRAM II
Page 32
32
KIDS
User Manual
WARNINGS AND SAFETY ADVISES
Not suitable for children under 6 years
If this is your children’s rst motorbike we recommend your children
to access a training course in order to star with this sport the best and
safest way possible. Visit www.torrotelectric.com for mor info.
We recommend you to read this handbook and make your
children understand that this is not a toy and make him/her read
and comprehend the warnings and safety advises we give in this
document.
In order to prevent an unauthorised use of the motorbike by your
child, an adult should keep the ignition key away from the children
after every use or when not supervising them.
To prevent serious injuries, your children should wear protective
measures such as helmet, appropiate boots and clothes, glasses,
knee guards and elbow guards.
The motorbike has drawings and pictograms stuck inside in order to
grant a correct use and alert the owner about these warinings.
DRAWINGS
The locations of the pictograms are at chain protector
Not allowed for children under 6
years old
Supervise your children while
they are using it
Read the instructions handbok
No pillions allowed
Not allowed to use it in road
Always wear helmet and appropiate protections
Page 33
33
KIDS
User Manual
FAQ
Why the battery range decreases when it is very cold?
Below 0ºC, the battery performance gets worse. This does not
epresent any problem nor damages the battery. It only decreases
omentarily the capacity of the battery, reducing at the same time the
motorcycle range.
Should I have a Third Party Liability Insurance?
No, the insurance is not obligatory.
Can I ride in the street?
No, these motorbikes are not allowed to ride in the street legally. You
can only ride in closed circuits.
Is there any minimum age to use the KIDS?
It is recommended for ages from 3 years, but it also depends on the
eight of your child. Remember that it must always be used under the
upervision of an adult.
Can I leave the charger continuously plugged to the battery?
Yes. The battery pack has an integrated electronic circuit (BMS) which
communicates with the charger. When it detects that the battery is
ully charged, the BMS automatically disconnects the charger.
Is the KIDS water-resistant?
Both the motor and the controller and its electrical connections are
roperly protected to a normal use under the rain. Nevertheless, the
bicycle is not prepared for high pressure cleaners or immersion.
Does it have regenerative braking?
No, it doesn’t have regenerative braking.
How can I programme the controller?
We explain you how to do it in pages 26, 27 and 28, 29 of this manual.
If you till have doubts, the easiest thing you can do is turn to an ofcial
Torrot Electric dealer and let them congure the controller.
Page 34
34
KIDS
PROBLEM POSIBLE CAUSE ERROR DETECTION/SOLUTION
When pressing ON buon, the indicator doesn’t turn on
and the motorbike doesn’t respond
Discharged baery Check the voltage of the baery. Charge the baery
Principal fuse deteriorated
Check the main fuse. Check if there is any short-circuit.
Replace the main fuse when is safe to do so
Start fuse deteriorated
Check the 0.5A fuse. Check if there is any short-circuit.
Replace the main fuse when is safe to do so
You haven’t turned the ignion key Check that the ignion key is in the ON posion.
The ignion switch doesn’t work
Check if there is any voltage in the terminal number 15
of the baery before turning the key and if the terminals
15 and 30 are connected when the key is in ON posion.
Replace the ignion switch
No start signal arrives to the E/S connector
Check the circuit and if the baery voltage arrives to the
cable number 7 (pink) of the E/S connector. Replace the
faulty parts of the circuit.
The indicator does respond and there is power in the Start
line, but the motorbike doesn’t respond
The controller doesn’t power the throle
Disconnect the throle and check if there is power in the
terminals. Replace the controller if necessary.
The throle is broken
Once check that there is supply voltage, chech the analogic
signal from the throle. Replace the throle if necessary.
User manual
TROUBLESHOOTING
Page 35
35
KIDS
PROBLEM POSIBLE CAUSE ERROR DETECTION/SOLUTION
When the motor is acve, it emits an unusual noise or too
much vibraon
Hall sensors wrongly connected
Check the hall sensors connecons. Check the connuity of
the connectors. Replace the connector if necessary
Some phase of the motor disconnected or mistake with the
connecons
Check the motor’s phase connectors
Controller not powering the sensor correctly
Disconnect the controller and verfy if there is power in the
hall sensors. Reconect them and check again. Replace the
controller and/or the motor.
One or more sensor don’t generate posion signals
With the motorbike in the start posion, make the motor
spin manually. Check if the hall sensors change when
moving the motor. Replace the motor if necessary.
One or more phases had deteriorated Check if the resistance of the windings is correct.
Excessive resistance applied to the motor
Check manually whether the wheel can move easily. Solve
possible problems with the braking system or the chassis.
User manual
TROUBLESHOOTING
Page 36
36
KIDS
PROBLEM POSIBLE CAUSE ERROR DETECTION/SOLUTION
The power switch doesn’t work
Connecon error of the power switch
Check the connecons of the power switch. Replace the
faulty parts
Faulty power switch Check the connuity of the switch. Replace it if necessary
Programming error
Program a random set of parameters to the controller.
Reset the controller and check if it works
The controller doesn’t supply voltage to the power switch
Disconnect the switch. Check if there enough voltage in the
power supply cable of the switch
When you connect the charger, the light stays green
Baery fully charged
Check the voltage of the baery. If it is at full charge, it
won’t charge more.
Connecon error
Check if there is voltage in the circular baery connector
and in the charge connector of the baery. Replace the
baery if necessary
Impossible to congure the controller Wrong conneciton cord
Compruebe que el cable de conexión está en buen estado y
correctamente conectado e instalado en su PC.
User manual
TROUBLESHOOTING
Page 37
37
KIDS
User Manual
WARRANTY TERMS & CONDITIONS
Torrot Electric Europa S.L. guarantees that only the
original components of each Torrot Electric vehicles
will not have defects in their materials or during their
manufacturing within the following time periods:
Two (2) years warranty for:
Chassis/frame and swingarm in the electric bicycle,
in the KIDS motorcycles and in the e-scooter MUVI.
Surface nish and any original Torrot Electric
component/piece on any Torrot Electric vehicle (KIDS,
CITYSURFER and MUVI). Two year warranty or
40.000km within that period, for MUVI’s batteries,
subjected to the conditions of use and maintenance
provided in this manual are respected.
Two year warranty for CITYSURFER batteries,
subjected to the conditions of use and maintenance
provided in this manual are respected.
Two year warranty for KIDS batteries, subjected to the
conditions of use and maintenance provided in this
manual are respected.
This warranty is only applied to new Torrot Electric
bicycles and electric vehicles bought to a Torrot Electric
Europa S.L. authorized dealer or just directly online to
the manufacturer and assembled by the dealer or the
manufacturer at the time of the purchase. This warranty
does not cover not allowed components or parts
mounted by not authorized dealers of Torrot Electric
Europa S.L.
REPARATIONS
Unless the opposite is established, the only reparation
covered by the warranty previously presented, is the
replacement of the defective parts by others with similar
or higher value in the original model, at the discretion of
Torrot Electric Europa S.L. This warranty begins on the
pur chased date. It only covers the original owner and
is not transferable, with the exception of the electric
scooter MUVI (see warranty transfer section in
the appendix).
In no case will Torrot Electric Europa S.L. be considered
responsible for direct hurts, unexpected events,
including without limitation, hurts caused by personal
injuries, material damages or economic losses, either
based on a contract, warranty, malpractice or any other
situation.
EXCLUSIONS
The previous warranty, or any other warranty given by
Torrot Electric Europa S.L., do not cover:
- The normal wear and breaking in components as tires,
chains, front and rear sprockets, brakes and wires in
situations in which the assembly was fullled correctly
or materials without defects.
- The vehicles whose maintenance or reparations were
made by not authorized people by the manufacturer or
unconnected to Torrot Electric Europa S.L.
- Changes related to the original conditions that
had the vehicle when it was delivered.
- The use of the Torrot Electric vehicles in competition,
unusual and/or commercial activities different from the
ones that our vehicles were designed for.
- Damages caused by not following the instructions
explained in the User Manual.
- Damages in the bodywork caused by
taking part in competitions, academic training for those
activities, social events or as a result of the exposure
or the use of the Torrot Electric vehicles in adverse
climates or conditions.
- Damages caused by external agents as chemical
products, salt, rusting, discoloration or natural
deterioration.
- Logistical costs in the replacement or substitution of
parts.
Page 38
38
KIDS
Excluding the explained in this warranty and the subjected
to additional warranties, Torrot Electric and their
employees and representatives will not be considered
responsible for losses or damages, whatever they may
be (including losses or unexpected events caused by
negligence or omission) derivative from o related to any
Torrot Electric vehicle.
Torrot Electric Europa S.L. does not make any other
warranty, either implicit or explicit. All implicit warranties,
included in the marketability warranties and adaptation
to a particular purpose, are limited in duration to the
explicit warranties previously mentioned.
Any reclamation under this warranty must be carried
out through a Torrot Electric authorized dealer, directly
online o by post to Torrot Electric Europa S.L. It is
necessary the receipt of the purchase date before
dealing with the reclamation under warranty, and
also having activated the online warranty in www.
torrotelectric.com
The complaints under this warranty made out of the
country of purchase can be subjected to additional taxes
and restrictions, and unless the contrary was indicated,
will only and directly be covered by the importer of the
country or region out of Spain.
The warranty durability and its details can differ
depending on the kind of the vehicle, battery and/
or country. This warranty gives specic legal rights.
Nevertheless, you can also have other right that can
differ depending on the country or region. This warranty
does not affect the rights established by the law.
These warranty conditions are applicable since 2016/07
for the following vehicles: electric motorcycles for children
KIDS, electric bikes Citysurfer and electric scooter MUVI.
APPENDIX
ONLINE WARRANTY REGISTRATION
To validate and activate the warranty, the vehicle must be
online registered by the dealer or importer.
WARRANTY TRANSFER (ONLY MUVI)
The transfer of the warranty will be accomplished for the
new owner when he/she prove to have concluded the
change of account holder of the vehicle as the law of
each country or region dictates, subject to the Spanish
manufacturer and the importers of the other countries.
USER’S RESPONSABILITIES
Torrot Electric Europa S.L. asks the user for some
requisites of good maintenance and use of their vehicles
to support correctly a complaint under warranty. During
the warranty period of your vehicle, you should only be
attended by Torrot Electric Europa S.L., Torrot Electric
Importers or authorized dealers. You will be responsible
of keeping your vehicle in good conditions and do not
subjected to strains beyond a normal use. During the
validity of the warranty you must make all the periodical
technical services as described in each Torrot Electric
vehicle’s User Manual. Otherwise, the warranty will be
invalidated immediately.
The Torrot Electric vehicle’s owner accept and
understand that when a Torrot Electric vehicle is
bought, the warranty does not cover damages repairing
appeared as a consequence of a misuse, overuse,
accident or negligence, as well as an unit with the
following characteristics:
- Modied characteristics with respect to its original
conguration, specied in the specication data sheet,
User Manual or online at www.torrot.com.
- Vehicles used in competition. That is to say, time trials,
competition with other vehicle or any other application of
unusual strain.
- Vehicles with lacking of a proper maintenance, cleaning
or without having made the pertinent periodical and
compulsory services detailed in each model’s User
Manual.
- Vehicles with an alteration in its speedometer or
in another electrical component (as the controller,
electronics...).
- Rental vehicles.
- Respect the gross vehicle mass in each vehicle,
specied in the User Manual, in the specication data
sheet of each Torrot Electric’s product or online in www.
torrotelectric.com.
- Parts that worn away by their normal use as:
batteries, Motorcycle grips and brake pads, secondary
transmissions to the wheel, tires, upholstery, electrical
components, suspension parts...
Page 39
39
KIDS
Frame Serial
Number
- Electric/electronic circuits modied to alter its original
performance, which do not belong to the original parts
or parts authorized specically by Torrot Electric Europa
S.L.
- Batteries charged with a not authorized or ofcial
charger, and batteries which had suffered an overload
or not controlled charges.
- Vehicles repaired in points of sale or dealers not
authorised by Torrot Electric Europa S.L., or without the
Torrot Electric Europa S.L. original parts.
This warranty does not cover the periodical and
compulsory maintenance services, or the services
indicated as a matter of routine for each model in
their User Manual.
In case you have any issue, please contact us for more
information in [email protected], attaching the Vehicle
Identication Numer, the problem detected, your name
and a phone number to be in contact with you.
Our technicians will get in contact with you quickly, and
after a pre-evaluation on the phone, they will tell you
wich procedure to follow.
Page 40
USER MANUAL MADE BY TORROT ELECTRIC EUROPA S.L.
© 03/2016 TEESL / THIS DOCUMENT CONTAINS INFORMATION WHICH IS PROTECTED
BY COPYRIGHT. ALL RIGHTES ARE RESERVED. REPRODUCTION, ADAPTATION, OR
TRANSLATION WITHOUT PRIOR WRITTEN PERMISSION IS PROHIBITED, EXCEPT AS
ALLOWED UNDER THE COPYRIGHT LAWS.
NO CONTRACTUAL IMAGES. DUE TO OUR CONSTANT IMPROVEMENT POLICY TORROT
ELECTRIC EUROPA SL, RESERVES ITS RIGHTS TO INTRODUCE CHANGES IN THE
PRODUCTS, SPECIFICATIONS AND EQUIPMENT WITHOUT NOTICE.
UPDATED INFORMATION AT WWW.TORROT.COM/EN/STORES
FIND YOUR TORROT CLOSEST DEALER AND GO THERE FOR THE BEST AFTERSALES
SERVICE ;-)
Torrot Electric After Sales Service
Check a map of all our Dealers updated in our website:
torrot.com
Page 41
Page 42
Loading...