Torquing Robotics ZANO User Manual
1.5
1
USER GUIDE: ZANO DRONE
VERSION 1.5 - 2015
Torquing Robotics Ltd © 2015. All rights reserved.
Under the copyright laws, this user guide may not be copied, in whole or in part, without
the written consent of Torquing Robotics Ltd. Any mention of third-party products is for
informational purposes and is neither an endorsement nor a recommendation. Torquing
Robotics Ltd assumes no responsibility with regard to the performance or use of these products.
• ZANO is a registered trademark of Torquing Group Ltd.
• App StoreSM is a trademark of Apple Inc.
• Google PlayTM is a trademark of Google Inc.
• All other trademarks in this ZANO Drone User Guide are protected and are the property of their
respective owners.
Table of contents
1. INTRODUCTION 8
2. DISCLAIMER 9
4. SAFETY PRECAUTIONS & MAINTENANCE 11
5. BATTERY USAGE 13
6. TECHNICAL SPECIFICATIONS 14
7. THE ZANO DRONE PACKAGE 15
8. CONNECTING YOUR ZANO DRONE 16
9. FLYING YOUR ZANO DRONE 17
10. IMAGES AND VIDEOS 21
11. FAQ’S 22
12. TROUBLESHOOTING 24
13. REFERENCE TABLES 25
14. SERVICE AND SUPPORT 27
ZANO Regulatory Information
No changes shall be made to the equipment without the manufacturer’s
permission as this may void the user’s authority to operate the equipment.
FCC Requirements:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation
This device complies with the FCC safety requirements for RF exposure in
accordance with FCC rule part §2.1091
Industry Canada Requirements:
This device complies with Industry Canada’s licence-exempt RSSs. Operation
is subject to the following two conditions:
(1) This device may not cause interference; and
6 ZANO RegulAtORy INfORmAtION
(2) This device must accept any interference, including interference that may
cause undesired operation of the device
This device complies with the IC safety requirements for RF exposure in
accordance with RSS-102 Issue 5 Section 2.5.2
Besoins pour les normes Canadiennes:
Cet appareil est conforme aux normes canadiennes d’utilisation hors-license
RSS. L’utilisation est sujette aux deux conditions suivantes:
(1) Cet appareil ne doit pas causer d’interferences; et
(2) Cet appareil est capable d’accepter quelconques interferences, incluant
les interférences qui pourraient causer un fonctionnement indésirable de
l’appareil.
Cet appareil est conforme aux normes canadiennes de sécurité vis a vis de
l’exposition aux HF en accord avec RSS-102 Edition 5 paragraphe 2.5.2
European CE Requirements:
Torquing Robotics declares that the ZANO1 is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC.
http://support.yzano.com/wp-content/uploads/2015/07/EC-Declaration.jpg
7ZANO RegulAtORy INfORmAtION
1. INTRODUCTION
Welcome to your new ZANO Drone and thank you for purchasing our
product.
Our ZANO Drone is an ultra-portable, personal aerial photography and HD
Video Capture Platform. It is small enough to t in the palm of your hand and
intelligent enough to y itself with your guidance. The ZANO Drone connects
directly to your smart device (iOS or Android) via onboard WiFi and enables
you to instantly begin capturing and sharing moments.
Please read the entire manual and follow these steps to use the Torquing
Robotics LTD ZANO Drone product. You can obtain up-to-date advice on
changes at the www.yzano.com website.
Regards,
The Torquing Robotics ZANO Team
www.yzano.com
8 INtROductION
2. DISCLAIMER
Please read this disclaimer carefully before using the ZANO Drone. By using
this product, you hereby agree to this disclaimer and signify that you have
read them fully. Failure to follow these steps each time you use your ZANO
Drone can result in issues that may damage or destroy your product. Your
warranty does not cover damage resulting from user error.
The conditions for the eectiveness of the product are the professional
installation and maintenance according to the operating instructions and
the generally acknowledged rules of technology (e.g. by an authorised
specialist) and the compliance with the operating instructions and the use
of the Torquing Robotics Ltd products according to Torquing Robotics Ltd’s
technical and care instructions.
Torquing Robotics Ltd accepts no liability for damage(s) or injuries incurred
directly or indirectly from the use of this product in the following conditions:
• non-conformity with the mounting instructions and instructions for use
and care that were provided or are available at www.yzano.com;
• installation, maintenance, repair or care by non-authorised persons;
• product defects that have been caused by the seller or third persons;
9dIsclAImeR
Loading...