Torque Fitness MJ-CP, MJ-CORE User Manual

MJ-CP CHEST PRESS

MJ-CP CHEST PRESS

MJ-CP CABLE TECHNOLOGY CHEST PRESS

EXPLODED DIAGRAM

PARTS LIST - STEP 1

ITEM PART NUMBER DESCRIPTION QTY

1 DABE03831416NU Cap Head Screw 3/8” x 3 1/4” L 2
2 DABE03843416NU Cap Head Screw 3/8” x 4 3/4”” L 4
3 DB2E03811000U Lock Nut 3/8” x 11t 6
4 DC120010510U 3/8” Flat Washer 8
5 DC322010015U 3/8” Curved Washer 4
6 A05-0212 Alum. Collar w/ Set Screw 2
7 P00875 Tower Assembly 1
8 P01-5184 Guide Rod 2
9 P02-6927 Spacer Plate (used when without Shroud) 1

10 P04-3849 Single Pulley Bracket 1
11 P04-4404 Top Pulley Bracket 1
12 P05-0036 Nut 1/2” x 7.8t 1
13 P06-0034 Weight Stack Cushion 2
14 P10-0048 WEIGHT PLATE, 15 lb 5
15 P10-0779 WEIGHT PLATE, 20 lb 3
16 P10-0862 WEIGHT PLATE, 10 lb 6
17 P11-0210 Selector Pin 1
18 P20-5017 Bottom Tube Assy 1
19 P20-5018 Top Plate w/ Selector Stem Assy 1

Position Bottom Tube Assembly (18) in place prior to installing weight stack.

After weight stack is assembled, raise guide rods and hold in elevated position with bolts used in Bottom Tube Assembly.

Raise Collars (6) to the top of the guide rods and secure in place using Allen wrench.

Clean surface of weight stack and install weight stack labels.