Toro TR-34D Sell Sheet
TR-34D Trench Roller
Compaction Products
Rugged Power for the Toughest Jobs
Toro®'s tough trench roller leads the pack in on-the-job performance. With over 15,000 lbs. of
impact force, you have the power to handle jobs like compacting foundations, deep trenches,
or large parking lots without sacrificing maneuverability or serviceability. Get more done in
less time with compaction speeds of 68 feet per minute and cover over 10,800 square feet per
hour. The TR-34D's skid steer design means it's faster and uses less space when making tight
turns around manhole covers, tight corners, and obstacles that leave other machines running in
circles.
FEATURES
RESPONDS ON COMMAND
• Control using the radiofrequency remote for safe
operation in un-shored
trenches and other jobs where
safety is critical
• Radio-frequency technology
allows for a 100-foot range
and prevents light-of-sight
transmission failure. The
operator doesn't need to stand
near a trench edge to maintain
a line of sight and can switch
seamlessly between backfilling
and compacting a trench with
the TR-34D without leaving the
cab of a backhoe
• Remote powered by standard
AA batteries means no
worrying about downtime due
to uncharged batteries
HIGH IMPACT, NIMBLE
OPERATION, AND EASY SERVICE
• Operates in the toughest soil
types with ground-packing
maximum total applied force
over 18,800 lbs.
• Electric start, powerful diesel
engine for optimal operation in
all climates
• Run up to 5.5 hours on a
3-gallon diesel full tank
• Large 13-gallon hydraulic
reservoir delivers cooler
operation and keeps the TR34D running longer between
oil change intervals.
•Maintenance points are
convenient with swing-away
covers providing full access to
electronic components, fuel,
oil, and hydraulic filters
• Ideal for rental applications,
the Snap-Tek electronic
control system includes a
microprocessor read-out on the
control console to provide fault
history and other operating
history
• LED lights and diagnostic
ports allow for easier, faster
maintenance checks
Radio-Frequency Remote Control
Allows for a 100-foot range and can
operate without a line-of-sight to
ensure optimal operation and safety
in any job condition.
TR-34D Trench Roller
TR-34D Trench Roller
Rugged Power
Built for the Toughest Jobs
SPECIFICATIONS
TR-34D Trench Roller
Operating Weight 3100 lbs (1406 kg)
Engine Hatz® 2G40
(Model 68039)
Dimensions (LxWxH)
(168 cm x 86 cm x 118 cm)
Drum Diameter 19.7" (50 cm)
Drum Width 34" (86.4 cm)
Operating Speed Up to 2,800 RPM (46.6 Hz)
Drive and Steering Hydrostatic
Hydraulic Reservoir 13 Gallons (49 L)
Fuel Tank Capacity 3 Gallons (11.4 L)
Vibration Frequency 2,000 VPM (33.3 Hz)
Centrifugal Force 15,709 lbs (70 kN)
Total Applied Force 18,809 lbs (84 kN)
Static Linear Pressure 48 PSI (84 N/cm)
Dynamic Linear Pressure 247 PSI (432 N/cm)
Total Applied Linear Pressure 295 PSI (516 N/cm)
Gradeability with Vibration ON 45%
Gradeability with Vibration OFF 55%
Travel Speed - HI (without Vibration)
66" x 34" x 46.4"
136 ft/min
(41.5 m/min)
Worldwide Headquarters
The Toro Company
8111 Lyndale Ave. So.
Bloomington, MN 55420
Phone: 1-952-888-8801
toro.com/rental
Travel Speed - LOW (with Vibration)
68 ft/min
(20.7 m/min)
Maximum Lift 27" (68.6 cm)
Tip Angle 43°
Productivity
Standard Accessories
Optional Accessories
Products depicted in this liter ature are for demonst ration purposes only. Actual product s offered for sale may vary in use, design, required
atta chment s and safet y features. We res erve th e right to improve our products and make changes in specifications, designs and standard
equipment without notice and without incurring obligation. See your dealer for details on all of our warranties. Produc t perfo rmance de pends
on job application and conditions.
©2013 The Toro Company
All Rig hts Reserved.
Vandal cover for TR-34D Controls
24" Narrow Drum Conversion Kit
490 -8768
10,798 sq.ft./hour
(1003.5 m/hour)
Snap-Tek Control System
& Remote Control
Loading...